Thread: 9.5 repo question

> On Jan 27, 2016, at 9:02 AM, John Scalia <jayknowsunix@gmail.com> wrote:
>
> So, then don't bother with the rc1 rpms?  Oh, and I can't use yum here to download due to configuration issues,
althoughI do use it for the actual install. 

rc1 RPMs are release candidate 1.  9.5.0 is the release, so that’s what you want going forward.

> On Jan 27, 2016, at 12:05 PM, John Scalia <jayknowsunix@gmail.com> wrote:
>
> Umm... new problem. I first installed both postgresql95-libs-9.5.0-1PGDG.rhel6.x86_64.rpm and the libs-2PGDG rpm. I
thentried installing postgresql-9.5.0-1PGDG.rhel.x86_64.rpm, but yum complains that libs-1PGDG is not installed. I ran
"yumlist postgresql95-libs" and, sure enough, it is reporting that only libs-2PGDG.rhel is installed for the
postgresql95-libs.x86_64package. I've tried getting around the problem by --skip-broken, but that didn't work either,
nordid the other yum suggestion to use -Va --nofiles --nodigest. I also tried to reinstall libs-1PGDG, but that fails
aswell. 
>
> Any suggestions as to how to get everything installed?

Yah, you don’t want any of the -1PGDG RPMs, only the -2PGDG RPMs.

Thanks, I'll try that tomorrow morning, when I get back to the office.

Sent from my iPad

> On Jan 27, 2016, at 3:58 PM, Jeff Frost <jeff@pgexperts.com> wrote:
>
>
>> On Jan 27, 2016, at 12:05 PM, John Scalia <jayknowsunix@gmail.com> wrote:
>>
>> Umm... new problem. I first installed both postgresql95-libs-9.5.0-1PGDG.rhel6.x86_64.rpm and the libs-2PGDG rpm. I
thentried installing postgresql-9.5.0-1PGDG.rhel.x86_64.rpm, but yum complains that libs-1PGDG is not installed. I ran
"yumlist postgresql95-libs" and, sure enough, it is reporting that only libs-2PGDG.rhel is installed for the
postgresql95-libs.x86_64package. I've tried getting around the problem by --skip-broken, but that didn't work either,
nordid the other yum suggestion to use -Va --nofiles --nodigest. I also tried to reinstall libs-1PGDG, but that fails
aswell. 
>>
>> Any suggestions as to how to get everything installed?
>
> Yah, you don’t want any of the -1PGDG RPMs, only the -2PGDG RPMs.

El mié, 27-01-2016 a las 11:02 -0600, John Scalia escribió:
> So, then don't bother with the rc1 rpms?  Oh, and I can't use yum
> here to download due to configuration issues, although I do use it
> for the actual install.

Well, you could use a local repo, mirroring yum.postgresql.org if you
have internet restrictions.
>
> On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com>
> wrote:
> > On Jan 27, 2016, at 7:45 AM, John Scalia <jayknowsunix@gmail.com>
> > wrote:
> > > I'm wanting to test the most recent version of postgresql, so I
> > > went to yum.postgresql.org and started looking in the repo for
> > > stuff to download. Nearly every component there has 3 rpms, a rc1
> > > copy in addition to a 1 and 2 rpm. My question is, do I need the
> > > rc1 rpm in addition to the 1 & 2 rpm's?  Or which ones do I need
> > > exactly for each component? I've done a little digging on the
> > > site, and I didn't really find any guidance.
> > You want the ones that are 9.5.0-<latest>.  So, in the RHEL6/x86_64
> > repo, that is:
> >
> > 9.5.0-2PGDG.rhel6
> >
> > If you let yum do the work for you, then after installing the
> > appropriate repo RPM you can just: yum install postgresql95 and
> > it’ll download and install the latest for you.
> >
> > Hope that helps.
> >

El lun, 01-02-2016 a las 08:13 -0600, John Scalia escribió:
> We do already have a local repo, but only packages that have been
> approved by our security team get included. They haven't validated
> the latest postgresql yet, that's actually what I'm trying to assist
> them with.
Ok, goog luck. So I hope you'll use stable version only.
>
> On Mon, Feb 1, 2016 at 6:35 AM, jaime soler <jaime.soler@gmail.com>
> wrote:
> > El mié, 27-01-2016 a las 11:02 -0600, John Scalia escribió:
> > > So, then don't bother with the rc1 rpms?  Oh, and I can't use yum
> > > here to download due to configuration issues, although I do use
> > it
> > > for the actual install.
> >
> > Well, you could use a local repo, mirroring yum.postgresql.org if
> > you
> > have internet restrictions.
> > >
> > > On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com>
> > > wrote:
> > > > On Jan 27, 2016, at 7:45 AM, John Scalia <
> > jayknowsunix@gmail.com>
> > > > wrote:
> > > > > I'm wanting to test the most recent version of postgresql, so
> > I
> > > > > went to yum.postgresql.org and started looking in the repo
> > for
> > > > > stuff to download. Nearly every component there has 3 rpms, a
> > rc1
> > > > > copy in addition to a 1 and 2 rpm. My question is, do I need
> > the
> > > > > rc1 rpm in addition to the 1 & 2 rpm's?  Or which ones do I
> > need
> > > > > exactly for each component? I've done a little digging on the
> > > > > site, and I didn't really find any guidance.
> > > > You want the ones that are 9.5.0-<latest>.  So, in the
> > RHEL6/x86_64
> > > > repo, that is:
> > > >
> > > > 9.5.0-2PGDG.rhel6
> > > >
> > > > If you let yum do the work for you, then after installing the
> > > > appropriate repo RPM you can just: yum install postgresql95 and
> > > > it’ll download and install the latest for you.
> > > >
> > > > Hope that helps.
> > > >
> >