Thread: Commands history with psql in a Windows command line shell
Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?
Otherwise we have absolutely no idea what the problem might be.On Tue, Aug 2, 2016 at 11:18 AM, Lmhelp1 <lmhelp1@orange.fr> wrote:
Hello,
I am using "psql" in "cmd.exe" in Windows (8.1).
Below is the command I use to connect to a database with "psql":
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
My problem is the following.
Suppose I enter one command:
<database_name># SELECT * FROM <a_table_1>;
and then another one:
<database_name># SELECT * FROM <a_table_2>;
The commands history "is not working": meaning I cannot retrieve these last two commands I entered by hitting the top arrow key.
Instead, I have to type them again.
To try to solve the problem, I entered the command:
<database_name># \set HISTSIZE 100
but it didn't change anything.
Yesterday, I don't remember what I did, but I could access the commands history using Powershell, maybe the command "\set HISTSIZE 100" and maybe a "psqlrc" file.
But whatever I've been trying to do since, I can't make it work again.
Can you please advise me what to do to make this work?
Best regards.
--
Léa Massiot
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
--
Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
Thank you for your answer.
cmd.exe> psql --version
psql (PostgreSQL) 9.5.2
Like I wrote, the Windows OS is 8.1 Pro.
Best regards,
--
Léa Massiot
On 2016-08-02 5:31 PM, Melvin Davidson wrote:
Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be.On Tue, Aug 2, 2016 at 11:18 AM, Lmhelp1 <lmhelp1@orange.fr> wrote:Hello,
I am using "psql" in "cmd.exe" in Windows (8.1).
Below is the command I use to connect to a database with "psql":
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
My problem is the following.
Suppose I enter one command:
<database_name># SELECT * FROM <a_table_1>;
and then another one:
<database_name># SELECT * FROM <a_table_2>;
The commands history "is not working": meaning I cannot retrieve these last two commands I entered by hitting the top arrow key.
Instead, I have to type them again.
To try to solve the problem, I entered the command:
<database_name># \set HISTSIZE 100
but it didn't change anything.
Yesterday, I don't remember what I did, but I could access the commands history using Powershell, maybe the command "\set HISTSIZE 100" and maybe a "psqlrc" file.
But whatever I've been trying to do since, I can't make it work again.
Can you please advise me what to do to make this work?
Best regards.
--
Léa Massiot
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
--Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
On Tue, Aug 2, 2016 at 11:40 AM, David G. Johnston <david.g.johnston@gmail.com> wrote:
Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be."Windows (8.1)" refers to the O/S version.Knowing the PostgreSQL version probably won't make a difference though knowing how it was installed might (though not for me personally).David J.
Thank you, Based on
https://www.postgresql.org/docs/9.5/static/app-psql.html#APP-PSQL-ENVIRONMENT
The following may be pertinent.
If -n / --no-readline was specified, then command history is not used.
What happens if you issue the \s command in psql? Is history supported?
What is the value for HISTFILE?
If -n / --no-readline was specified, then command history is not used.
What happens if you issue the \s command in psql? Is history supported?
What is the value for HISTFILE?
--
Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
Thank you for your answer.
1.
Like I wrote in my first post, the command I use to launch "psql" is:
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
So, I do not specify the "--no-readline" option.
2.
cmd.exe psql <database_name># \s
history is not supported by this installation
Powershell psql <database_name># \s
history is not supported by this installation
To install PostgreSQL, I used the "postgresql-9.5.2-1-windows-x64.exe" installer the 2016/04/21.
So I don't remember much about what I did that day.
3.
When I do:
psql <database_name># \set
HISTFILE does not appear in the result.
So, I guess it is not set.
Best regards,
--
Léa Massiot
On 2016-08-02 5:56 PM, Melvin Davidson wrote:
The following may be pertinent.
If -n / --no-readline was specified, then command history is not used.
What happens if you issue the \s command in psql? Is history supported?
What is the value for HISTFILE?
--Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
On Tue, Aug 2, 2016 at 11:40 AM, David G. Johnston <david.g.johnston@gmail.com> wrote:
On Tue, Aug 2, 2016 at 11:31 AM, Melvin Davidson <melvin6925@gmail.com> wrote:
Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be.
"Windows (8.1)" refers to the O/S version.
Knowing the PostgreSQL version probably won't make a difference though knowing how it was installed might (though not for me personally).
David J.
On 2016-08-02 5:40 PM, Lmhelp1 wrote:
Thank you for your answer.
cmd.exe> psql --version
psql (PostgreSQL) 9.5.2
Like I wrote, the Windows OS is 8.1 Pro.Best regards,
--
Léa Massiot
On 2016-08-02 5:31 PM, Melvin Davidson wrote:Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be.On Tue, Aug 2, 2016 at 11:18 AM, Lmhelp1 <lmhelp1@orange.fr> wrote:Hello,
I am using "psql" in "cmd.exe" in Windows (8.1).
Below is the command I use to connect to a database with "psql":
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
My problem is the following.
Suppose I enter one command:
<database_name># SELECT * FROM <a_table_1>;
and then another one:
<database_name># SELECT * FROM <a_table_2>;
The commands history "is not working": meaning I cannot retrieve these last two commands I entered by hitting the top arrow key.
Instead, I have to type them again.
To try to solve the problem, I entered the command:
<database_name># \set HISTSIZE 100
but it didn't change anything.
Yesterday, I don't remember what I did, but I could access the commands history using Powershell, maybe the command "\set HISTSIZE 100" and maybe a "psqlrc" file.
But whatever I've been trying to do since, I can't make it work again.
Can you please advise me what to do to make this work?
Best regards.
--
Léa Massiot
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
--Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
Thank you for your answer.
With the "SQL Shell" tool, the commands history is indeed available!
So, I guess I am now going to use this tool instead of "cmd.exe".
This solves my problem.
Thank you and best regards.
--
Léa Massiot
On 2016-08-02 6:27 PM, Adrian Klaver wrote:
With the "SQL Shell" tool, the commands history is indeed available!
So, I guess I am now going to use this tool instead of "cmd.exe".
This solves my problem.
Thank you and best regards.
--
Léa Massiot
On 2016-08-02 6:27 PM, Adrian Klaver wrote:
What happens if you use the SQL Shell from the program menu on the Start Menu?:
http://www.enterprisedb.com/resources-community/tutorials-quickstarts/windows/getting-started-postgres-plus-tutorial-windows
On 2016-08-02 6:19 PM, Lmhelp1 wrote:
Thank you for your answer.
1.
Like I wrote in my first post, the command I use to launch "psql" is:
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
So, I do not specify the "--no-readline" option.
2.
cmd.exe psql <database_name># \s
history is not supported by this installation
Powershell psql <database_name># \s
history is not supported by this installation
To install PostgreSQL, I used the "postgresql-9.5.2-1-windows-x64.exe" installer the 2016/04/21.
So I don't remember much about what I did that day.
3.
When I do:
psql <database_name># \set
HISTFILE does not appear in the result.
So, I guess it is not set.
Best regards,
--
Léa MassiotOn 2016-08-02 5:56 PM, Melvin Davidson wrote:The following may be pertinent.
If -n / --no-readline was specified, then command history is not used.
What happens if you issue the \s command in psql? Is history supported?
What is the value for HISTFILE?
--Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.
On Tue, Aug 2, 2016 at 11:40 AM, David G. Johnston <david.g.johnston@gmail.com> wrote:On Tue, Aug 2, 2016 at 11:31 AM, Melvin Davidson <melvin6925@gmail.com> wrote:Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be."Windows (8.1)" refers to the O/S version.Knowing the PostgreSQL version probably won't make a difference though knowing how it was installed might (though not for me personally).David J.On 2016-08-02 5:40 PM, Lmhelp1 wrote:Thank you for your answer.
cmd.exe> psql --version
psql (PostgreSQL) 9.5.2
Like I wrote, the Windows OS is 8.1 Pro.Best regards,
--
Léa MassiotOn 2016-08-02 5:31 PM, Melvin Davidson wrote:Are you doing this in PostgreSQL 7.3 and Windows XP? Can you provide us with a little more useful information like current PostgreSQL version and O/S?Otherwise we have absolutely no idea what the problem might be.On Tue, Aug 2, 2016 at 11:18 AM, Lmhelp1 <lmhelp1@orange.fr> wrote:Hello,
I am using "psql" in "cmd.exe" in Windows (8.1).
Below is the command I use to connect to a database with "psql":
cmd.exe> psql -p <tcp_port> -U <username> <database_name>
My problem is the following.
Suppose I enter one command:
<database_name># SELECT * FROM <a_table_1>;
and then another one:
<database_name># SELECT * FROM <a_table_2>;
The commands history "is not working": meaning I cannot retrieve these last two commands I entered by hitting the top arrow key.
Instead, I have to type them again.
To try to solve the problem, I entered the command:
<database_name># \set HISTSIZE 100
but it didn't change anything.
Yesterday, I don't remember what I did, but I could access the commands history using Powershell, maybe the command "\set HISTSIZE 100" and maybe a "psqlrc" file.
But whatever I've been trying to do since, I can't make it work again.
Can you please advise me what to do to make this work?
Best regards.
--
Léa Massiot
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
--Melvin Davidson
I reserve the right to fantasize. Whether or not you
wish to share my fantasy is entirely up to you.