Re: pgbouncer with ldap - Mailing list pgsql-general

Yes I did set that, here is how pgbouncer looks like ---

-rwsrwsr-x. 1 root     root     2087504 Sep 13 00:45 pgbouncer

If you had set the same password in the postgresql server for the user and in the pgbouncer local unix user it should work.
What are the contents of your /etc/pam.d files?
How do /etc/pam.d/other /etc/pam.d/common-auth /etc/pam.d/common-account look like?
How about data/pg_hba.conf ?

Also try to do your tests by tail -f :
* the pgbouncer log
* linux auth.log or equivalent
* the pgsql log
and watch them for every enter you press.

You might have to tweak data/pg_hba.conf as well in order to look for md5 passwords for this user from the pgbouncer machine.

On Fri, Sep 13, 2019 at 6:50 AM Achilleas Mantzios <achill@matrix.gatewaynet.com> wrote:

On 13/9/19 10:19 π.μ., Ayub M wrote:

Stumbled in the first step - PAM authentication via pgbouncer. After compiling pgbouncer with the pam plug-in, I am unable to login into the db - throws PAM error message. Please help.

User created with the same password as linux user --

localhost:~$ psql -h dbhost -p 3306 -U admin -W db1

db1=> create user testuser password 'hello123';

CREATE ROLE

[ec2-user@ip-1.1.1.1 pam.d]$ psql -h localhost -p 5432 testdb -U testuser

Password for user testuser: 

psql: ERROR:  auth failed

ok, pgbouncer should be able to read /etc/pam* files.
Did you miss the
# chown root:staff ~pgbouncer/pgbouncer-1.9.0/pgbouncer    

# chmod +s ~pgbouncer/pgbouncer-1.9.0/pgbouncer

part?

Log entries - pgbouncer.log

2019-09-13 06:51:47.180 UTC [5752] LOG C-0x1243020: testdb/testuser@[::1]:52408 login attempt: db=testdb user=testuser tls=no

2019-09-13 06:51:47.180 UTC [5752] NOISE safe_send(12, 9) = 9

2019-09-13 06:51:47.180 UTC [5752] NOISE resync(12): done=86, parse=86, recv=86

2019-09-13 06:51:47.180 UTC [5752] NOISE resync(12): done=0, parse=0, recv=0

2019-09-13 06:51:47.180 UTC [5752] NOISE safe_recv(12, 4096) = 14

2019-09-13 06:51:47.180 UTC [5752] NOISE C-0x1243020: testdb/testuser@[::1]:52408 read pkt='p' len=14

2019-09-13 06:51:47.180 UTC [5752] DEBUG C-0x1243020: testdb/testuser@[::1]:52408 pam_auth_begin(): pam_first_taken_slot=1, pam_first_free_slot=1

2019-09-13 06:51:47.180 UTC [5752] DEBUG pam_auth_worker(): processing slot 1

2019-09-13 06:51:47.180 UTC [5752] WARNING pam_authenticate() failed: Authentication failure

2019-09-13 06:51:47.181 UTC [5752] DEBUG pam_auth_worker(): authorization completed, status=3

2019-09-13 06:51:47.386 UTC [5752] LOG C-0x1243020: testdb/testuser@[::1]:52408 closing because: auth failed (age=0s)

2019-09-13 06:51:47.386 UTC [5752] WARNING C-0x1243020: testdb/testuser@[::1]:52408 pooler error: auth failed

Able to login as testuser 

[ec2-user@ip-1.1.1.1 pam.d]$ su - testuser 

Password: 

Last login: Fri Sep 13 06:21:12 UTC 2019 on pts/1

[testuser@ip-1.1.1.1 ~]$ id

uid=1001(testuser) gid=1001(testuser) groups=1001(testuser) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023

The user was created as follows

[root@ip-1.1.1.1 ~]# adduser -p hello123 testuser

[root@ip-1.1.1.1 ~]# id testuser

uid=1001(testuser) gid=1001(testuser) groups=1001(testuser)

Here is the pgbouncer.ini config

[ec2-user@ip-1.1.1.1 etc]$ less pgbouncer.ini | grep -v '^$' | grep -v '^;' 

[databases]

testdb = host=dbhost port=3306 dbname=db1

[users]

[pgbouncer]

logfile = /var/log/pgbouncer/pgbouncer.log

pidfile = /var/run/pgbouncer/pgbouncer.pid

listen_addr = *

listen_port = 5432

auth_type = pam

Am I missing something? Any permissions?

On Thu, Sep 12, 2019 at 4:54 AM Ayub M <hiayub@gmail.com> wrote:

Okay, thanks for the response. Unfortunately Aurora does not expose these files or I should say there is no concept of these files in AWS managed Aurora DB service. Anyway I will give a try and let you know.

On Thu, Sep 12, 2019 at 1:52 AM Achilleas Mantzios <achill@matrix.gatewaynet.com> wrote:

On 11/9/19 2:47 μ.μ., Ayub M wrote:

Achilleas, for this setup to work are changes to postgresql.conf and pg_hba.conf needed? I am trying to implement this for AWS rds Aurora where these files are not accessible. 

Those files are needed in any case if you work with postgresql. Unfortunately no experience with Aurora. He have been building from source for ages.

On Mon, Sep 9, 2019, 6:46 AM Achilleas Mantzios <achill@matrix.gatewaynet.com> wrote:

On 9/9/19 12:41 μ.μ., Laurenz Albe wrote:
> Christoph Moench-Tegeder wrote:
>>> It has hba and via hba file one can specify ldap connections
>>>
>>> https://www.postgresql.org/docs/9.3/auth-pg-hba-conf.html
>> https://pgbouncer.github.io/config.html#hba-file-format
>> "Auth-method field: Only methods supported by PgBouncer’s auth_type
>> are supported", and "ldap" is not supported.
>> When there's no ldap support in pgbouncer, there's no ldap support
>> in pgbouncer.
> To throw in something less tautological:
>
> PgBouncer supports PAM authentication, so if you are on UNIX,
> you could use PAM's LDAP module to do what you want.
Right, I had written a blog about it :
https://severalnines.com/database-blog/one-security-system-application-connection-pooling-and-postgresql-case-ldap

However, I always wished (since my first endeavors with pgbouncer) it was less complicated.
>
> Yours,
> Laurenz Albe


--
Achilleas Mantzios
IT DEV Lead
IT DEPT
Dynacom Tankers Mgmt

-- 
Achilleas Mantzios
IT DEV Lead
IT DEPT
Dynacom Tankers Mgmt

--

Regards,

Ayub

--

Regards,

Ayub

-- 
Achilleas Mantzios
IT DEV Lead
IT DEPT
Dynacom Tankers Mgmt

--

Regards,

Ayub

-- 
Achilleas Mantzios
IT DEV Lead
IT DEPT
Dynacom Tankers Mgmt