pg_repack — utility and Postgres Pro Enterprise extension to reorganize tables
pg_repack is a Postgres Pro Enterprise extension which lets you remove bloat from tables and indexes, and optionally restore the physical order of clustered indexes. Unlike CLUSTER and
VACUUM FULL it works online, without holding an exclusive lock on the processed tables during processing. pg_repack is efficient to boot, with performance comparable to using
You can choose one of the following methods to reorganize data:
CLUSTER(ordered by cluster index)
Ordering by specified columns
VACUUM FULL(packing rows only)
Rebuild or relocate only the indexes of a table
Only superusers can use the utility.
Target table must have a PRIMARY KEY, or at least a UNIQUE total index on a NOT NULL column.
On Linux systems, pg_repack is provided together with Postgres Pro as a separate pre-built package and requires the
postgrespro-ent-10-server package to be installed with all the dependencies. For the list of available packages and detailed installation instructions, see Chapter 17. On Windows systems, pg_repack is automatically installed as part of Postgres Pro.
Once you have pg_repack installed, load the
pg_repack extension in the database you want to process, as follows:
$ psql -c "CREATE EXTENSION pg_repack" -d
You can later remove
pg_repack from a Postgres Pro installation using
DROP EXTENSION pg_repack.
If you are upgrading from a previous version of pg_repack, just drop the old version from the database as explained above and install the new version.
Attempt to repack all the databases of the cluster. Databases where the
pg_repackextension is not installed will be skipped.
Reorganize the specified table(s) only. Multiple tables may be reorganized by writing multiple
-tswitches. By default, all eligible tables in the target databases are reorganized.
Repack the tables in the specified schema(s) only. Multiple schemas may be repacked by writing multiple
-cswitches. Can be used in conjunction with
--tablespaceto move tables to a different tablespace.
Perform an online
CLUSTERordered by the specified columns.
Perform an online
VACUUM FULL. Since version 1.2 this is the default for non-clustered tables.
Show what would be repacked and exit.
Create the specified number of extra connections to Postgres Pro Enterprise, and use these extra connections to parallelize the rebuild of indexes on each table. Parallel index builds are only supported for full-table repacks, not with
--only-indexesoptions. If your server has extra cores and disk I/O available, this can be a useful way to speed up pg_repack.
Move the repacked tables to the specified tablespace: essentially an online version of
ALTER TABLE ... SET TABLESPACE. The tables' indexes are left in the original tablespace unless
--moveidxis specified too.
Also move the indexes of the repacked tables to the tablespace specified by the
Repack the specified index(es) only. Multiple indexes may be repacked by writing multiple
-iswitches. May be used in conjunction with
--tablespaceto move the index(es) to a different tablespace.
Repack only the indexes of the specified table(s), which must be specified with the
pg_repack needs to take an exclusive lock at the end of the reorganization. This setting controls how many seconds pg_repack will wait to acquire this lock. If the lock cannot be taken after this duration, pg_repack will forcibly cancel the conflicting queries. If you are using Postgres Pro or PostgreSQL version 8.4 or newer, pg_repack will fall back to using
pg_terminate_backend()to disconnect any remaining backends after this timeout has passed twice. The default is 60 seconds.
ANALYZEafter a full-table reorganization. If not specified,
ANALYZEis executed after the reorganization.
Specifies the name of the database to be reorganized. If this is not specified and
--all) is not used, the database name is read from the environment variable
PGDATABASE. If that is not set, the user name specified for the connection is used.
Specifies the host name of the machine on which the server is running. If the value begins with a slash, it is used as the directory for the Unix domain socket.
Specifies the TCP port or local Unix domain socket file extension on which the server is listening for connections.
User name to connect as.
Never issue a password prompt. If the server requires password authentication and a password is not available by other means such as a
.pgpassfile, the connection attempt will fail. This option can be useful in batch jobs and scripts where no user is present to enter a password.
Force pg_repack to prompt for a password before connecting to a database.
This option is never essential, since pg_repack will automatically prompt for a password if the server demands password authentication. However, pg_repack will waste a connection attempt finding out that the server wants a password. In some cases it is worth typing
-Wto avoid the extra connection attempt.
Echo the commands that pg_repack generates and sends to the server.
Choose the output message level from
PANIC. The default is
Show help about pg_repack command line arguments, and exit.
Print the pg_repack version and exit.
Default connection parameters
This utility, like most other Postgres Pro utilities, also uses the environment variables supported by libpq (see Section 33.14).
Perform an online
CLUSTER of all the clustered tables in the database
test, and perform an online
VACUUM FULL of all the non-clustered tables:
$ pg_repack test
Perform an online
VACUUM FULL on the tables
bar in the database
test (an eventual cluster index is ignored):
$ pg_repack --no-order --table foo --table bar test
Move all indexes of table
foo to tablespace
$ pg_repack -d test --table foo --only-indexes --tablespace tbs
Move the specified index to tablespace
$ pg_repack -d test --index idx --tablespace tbs
Error messages are reported when pg_repack fails. The following list shows the cause of errors.
You need to cleanup by hand after fatal errors. To cleanup, just remove
pg_repack from the database and install it again.
For Postgres Pro or PostgreSQL 9.1 and newer execute:
DROP EXTENSION pg_repack CASCADE
in the database where the error occurred, followed by
CREATE EXTENSION pg_repack
For previous versions load the script
$SHAREDIR/contrib/uninstall_pg_repack.sql into the database where the error occurred and then load
INFO: database "db" skipped: pg_repack VER is not installed in the database: pg_repack is not installed in the database when the --all option is specified.
pg_repack extension in the database.
ERROR: pg_repack VER is not installed in the database: pg_repack is not installed in the database specified by --dbname
pg_repack extension in the database.
ERROR: program 'pg_repack V1' does not match database library 'pg_repack V2': There is a mismatch between the pg_repack binary and the database library (.so or .dll).
The mismatch could be due to the wrong binary in the
PATH or the wrong database being addressed. Check the program directory and the database; if they are what expected you may need to repeat
ERROR: extension 'pg_repack V1' required, found extension 'pg_repack V2': The SQL extension found in the database does not match the version required by the pg_repack program.
You should drop the extension from the database and reload it as described in the section called “Installation”.
ERROR: relation "table" must have a primary key or not-null unique keys: The target table doesn't have a PRIMARY KEY or any UNIQUE constraints defined.
Define a PRIMARY KEY or a UNIQUE constraint on the table.
ERROR: query failed: ERROR: column "col" does not exist: The target table doesn't have columns specified by --order-by option.
Specify existing columns.
WARNING: the table "tbl" already has a trigger called z_repack_trigger: The trigger was probably installed during a previous attempt to run pg_repack on the table which was interrupted and for some reason failed to clean up the temporary objects.
You can remove all the temporary objects by dropping and re-creating the extension: see the section called “Installation” for the details.
WARNING: trigger "trg" conflicting on table "tbl": The target table has a trigger whose name follows z_repack_trigger in alphabetical order.
z_repack_trigger should be the last BEFORE trigger to fire. Please rename your trigger so that it sorts alphabetically before
pg_repack one; you can use:
ERROR: Another pg_repack command may be running on the table. Please try again later.
There is a chance of deadlock when two concurrent
pg_repack commands are run on the same table. So, try to run the command after some time.
WARNING: Cannot create index "schema"."index_xxxxx", already exists DETAIL: An invalid index may have been left behind by a previous pg_repack on the table which was interrupted. Please use DROP INDEX "schema"."index_xxxxx" to remove this index and try again.
A temporary index apparently created by pg_repack has been left behind, and we do not want to risk dropping this index ourselves. If the index was in fact created by an old pg_repack job which didn't get cleaned up, you should just use
DROP INDEX and try the
repack command again.
pg_repack comes with the following restrictions.
- Temporary tables
pg_repack cannot reorganize temporary tables.
- GiST indexes
pg_repack cannot reorganize tables using
- DDL commands
You will not be able to perform DDL commands of the target table(s) except
ANALYZEwhile pg_repack is working. pg_repack will hold an
ACCESS SHARElock on the target table during a full-table repack, to enforce this restriction.
If you are using version 1.1.8 or earlier, you must not attempt to perform any DDL commands on the target table(s) while pg_repack is running. In many cases pg_repack would fail and rollback correctly, but there were some cases in these earlier versions which could result in data corruption.