Thread: Re: load fom csv
On Mon, 16 Sept 2024 at 17:36, Andy Hartman <hartman60home@gmail.com> wrote:
I'm trying to run this piece of code from Powershell and it just sits there and never comes back. There are only 131 records in the csv.$connectionString = "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword"$copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER ',' CSV HEADER;"psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommandhow can I debug this?
I would start by adding -a and -e after "psql".
IIRC Powershell is windows, and in windows shell do not pass command words preparsed as in *ix to the executable, but a single command line with the executable must parse. Given the amount of quoting, -a and -e will let you see the commands are properly sent, and if it is trying to read something what it is.
I will also try to substitute the -c with a pipe. If it heals, it is probably a quoting issue.
Also, I just caught Ron's message, and psql might be waiting for a password.
Francisco Olarte.
2024-09-16 12:06:00.968 EDT [4968] ERROR: relation "image_classification_master" does not exist
2024-09-16 12:06:00.968 EDT [4968] STATEMENT: COPY Image_Classification_Master FROM STDIN DELIMITER ',' CSV HEADER;
On Mon, Sep 16, 2024 at 11:52 AM Francisco Olarte <folarte@peoplecall.com> wrote:
On Mon, 16 Sept 2024 at 17:36, Andy Hartman <hartman60home@gmail.com> wrote:I'm trying to run this piece of code from Powershell and it just sits there and never comes back. There are only 131 records in the csv.$connectionString = "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword"$copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER ',' CSV HEADER;"psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommandhow can I debug this?I would start by adding -a and -e after "psql".IIRC Powershell is windows, and in windows shell do not pass command words preparsed as in *ix to the executable, but a single command line with the executable must parse. Given the amount of quoting, -a and -e will let you see the commands are properly sent, and if it is trying to read something what it is.I will also try to substitute the -c with a pipe. If it heals, it is probably a quoting issue.Also, I just caught Ron's message, and psql might be waiting for a password.Francisco Olarte.
On 9/16/24 09:12, Andy Hartman wrote: > 2024-09-16 12:06:00.968 EDT [4968] ERROR: relation > "image_classification_master" does not exist > 2024-09-16 12:06:00.968 EDT [4968] STATEMENT: COPY > Image_Classification_Master FROM STDIN DELIMITER ',' CSV HEADER; I'm assuming this is from the Postgres log. Best guess is the table name in the database is mixed case and needs to be double quoted in the command to preserve the casing. See: https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS for why. > > On Mon, Sep 16, 2024 at 11:52 AM Francisco Olarte > <folarte@peoplecall.com <mailto:folarte@peoplecall.com>> wrote: > > > > On Mon, 16 Sept 2024 at 17:36, Andy Hartman <hartman60home@gmail.com > <mailto:hartman60home@gmail.com>> wrote: > > I'm trying to run this piece of code from Powershell and it just > sits there and never comes back. There are only 131 records in > the csv. > $connectionString = > "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword" > $copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER ',' CSV > HEADER;" > psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommand > how can I debug this? > > > I would start by adding -a and -e after "psql". > > IIRC Powershell is windows, and in windows shell do not pass command > words preparsed as in *ix to the executable, but a single command > line with the executable must parse. Given the amount of quoting, -a > and -e will let you see the commands are properly sent, and if it is > trying to read something what it is. > > I will also try to substitute the -c with a pipe. If it heals, it is > probably a quoting issue. > > Also, I just caught Ron's message, and psql might be waiting for a > password. > > Francisco Olarte. > -- Adrian Klaver adrian.klaver@aklaver.com
It Looks correct.
$pgTable = "image_classification_master"
On Mon, Sep 16, 2024 at 12:17 PM Adrian Klaver <adrian.klaver@aklaver.com> wrote:
On 9/16/24 09:12, Andy Hartman wrote:
> 2024-09-16 12:06:00.968 EDT [4968] ERROR: relation
> "image_classification_master" does not exist
> 2024-09-16 12:06:00.968 EDT [4968] STATEMENT: COPY
> Image_Classification_Master FROM STDIN DELIMITER ',' CSV HEADER;
I'm assuming this is from the Postgres log.
Best guess is the table name in the database is mixed case and needs to
be double quoted in the command to preserve the casing.
See:
https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS
for why.
>
> On Mon, Sep 16, 2024 at 11:52 AM Francisco Olarte
> <folarte@peoplecall.com <mailto:folarte@peoplecall.com>> wrote:
>
>
>
> On Mon, 16 Sept 2024 at 17:36, Andy Hartman <hartman60home@gmail.com
> <mailto:hartman60home@gmail.com>> wrote:
>
> I'm trying to run this piece of code from Powershell and it just
> sits there and never comes back. There are only 131 records in
> the csv.
> $connectionString =
> "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword"
> $copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER ',' CSV
> HEADER;"
> psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommand
> how can I debug this?
>
>
> I would start by adding -a and -e after "psql".
>
> IIRC Powershell is windows, and in windows shell do not pass command
> words preparsed as in *ix to the executable, but a single command
> line with the executable must parse. Given the amount of quoting, -a
> and -e will let you see the commands are properly sent, and if it is
> trying to read something what it is.
>
> I will also try to substitute the -c with a pipe. If it heals, it is
> probably a quoting issue.
>
> Also, I just caught Ron's message, and psql might be waiting for a
> password.
>
> Francisco Olarte.
>
--
Adrian Klaver
adrian.klaver@aklaver.com
On 9/16/24 09:46, Andy Hartman wrote: > > It Looks correct. > > $pgTable = "image_classification_master" Connect to the database with psql and look at the table name. I'm betting it is not image_classification_master. Instead some mixed or all upper case version of the name. I don't use PowerShell or Windows for that matter these days so I can't be of much use on the script. I do suspect you will need to some escaping to get the table name properly quoted in the script. To work through this you need to try what I call the crawl/walk/run process. In this case that is: 1) Crawl. Connect using psql and run the \copy in it with hard coded values. 2) Walk. Use psql with the -c argument and supply the command again with hard coded values 3) Run. Then use PowerShell and do the variable substitution. > > > > > On Mon, Sep 16, 2024 at 12:17 PM Adrian Klaver > <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote: > > On 9/16/24 09:12, Andy Hartman wrote: > > 2024-09-16 12:06:00.968 EDT [4968] ERROR: relation > > "image_classification_master" does not exist > > 2024-09-16 12:06:00.968 EDT [4968] STATEMENT: COPY > > Image_Classification_Master FROM STDIN DELIMITER ',' CSV HEADER; > > I'm assuming this is from the Postgres log. > > Best guess is the table name in the database is mixed case and needs to > be double quoted in the command to preserve the casing. > > See: > > https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS <https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS> > > for why. > > > > > On Mon, Sep 16, 2024 at 11:52 AM Francisco Olarte > > <folarte@peoplecall.com <mailto:folarte@peoplecall.com> > <mailto:folarte@peoplecall.com <mailto:folarte@peoplecall.com>>> wrote: > > > > > > > > On Mon, 16 Sept 2024 at 17:36, Andy Hartman > <hartman60home@gmail.com <mailto:hartman60home@gmail.com> > > <mailto:hartman60home@gmail.com > <mailto:hartman60home@gmail.com>>> wrote: > > > > I'm trying to run this piece of code from Powershell and > it just > > sits there and never comes back. There are only 131 > records in > > the csv. > > $connectionString = > > > "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword" > > $copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER > ',' CSV > > HEADER;" > > psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommand > > how can I debug this? > > > > > > I would start by adding -a and -e after "psql". > > > > IIRC Powershell is windows, and in windows shell do not pass > command > > words preparsed as in *ix to the executable, but a single command > > line with the executable must parse. Given the amount of > quoting, -a > > and -e will let you see the commands are properly sent, and > if it is > > trying to read something what it is. > > > > I will also try to substitute the -c with a pipe. If it > heals, it is > > probably a quoting issue. > > > > Also, I just caught Ron's message, and psql might be waiting > for a > > password. > > > > Francisco Olarte. > > > > -- > Adrian Klaver > adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com> > -- Adrian Klaver adrian.klaver@aklaver.com
in LOG
2024-09-16 12:55:37.295 EDT [428] ERROR: invalid byte sequence for encoding "UTF8": 0x00
2024-09-16 12:55:37.295 EDT [428] CONTEXT: COPY image_classification_master, line 1, column spoolstarttime
On Mon, Sep 16, 2024 at 12:56 PM Adrian Klaver <adrian.klaver@aklaver.com> wrote:
On 9/16/24 09:46, Andy Hartman wrote:
>
> It Looks correct.
>
> $pgTable = "image_classification_master"
Connect to the database with psql and look at the table name. I'm
betting it is not image_classification_master. Instead some mixed or all
upper case version of the name.
I don't use PowerShell or Windows for that matter these days so I can't
be of much use on the script. I do suspect you will need to some
escaping to get the table name properly quoted in the script. To work
through this you need to try what I call the crawl/walk/run process. In
this case that is:
1) Crawl. Connect using psql and run the \copy in it with hard coded values.
2) Walk. Use psql with the -c argument and supply the command again with
hard coded values
3) Run. Then use PowerShell and do the variable substitution.
>
>
>
>
> On Mon, Sep 16, 2024 at 12:17 PM Adrian Klaver
> <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
>
> On 9/16/24 09:12, Andy Hartman wrote:
> > 2024-09-16 12:06:00.968 EDT [4968] ERROR: relation
> > "image_classification_master" does not exist
> > 2024-09-16 12:06:00.968 EDT [4968] STATEMENT: COPY
> > Image_Classification_Master FROM STDIN DELIMITER ',' CSV HEADER;
>
> I'm assuming this is from the Postgres log.
>
> Best guess is the table name in the database is mixed case and needs to
> be double quoted in the command to preserve the casing.
>
> See:
>
> https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS <https://www.postgresql.org/docs/current/sql-syntax-lexical.html#SQL-SYNTAX-IDENTIFIERS>
>
> for why.
>
> >
> > On Mon, Sep 16, 2024 at 11:52 AM Francisco Olarte
> > <folarte@peoplecall.com <mailto:folarte@peoplecall.com>
> <mailto:folarte@peoplecall.com <mailto:folarte@peoplecall.com>>> wrote:
> >
> >
> >
> > On Mon, 16 Sept 2024 at 17:36, Andy Hartman
> <hartman60home@gmail.com <mailto:hartman60home@gmail.com>
> > <mailto:hartman60home@gmail.com
> <mailto:hartman60home@gmail.com>>> wrote:
> >
> > I'm trying to run this piece of code from Powershell and
> it just
> > sits there and never comes back. There are only 131
> records in
> > the csv.
> > $connectionString =
> >
> "Host=$pgServer;Database=$pgDatabase;Username=$pgUser;Password=$pgPassword"
> > $copyCommand = "\COPY $pgTable FROM '$csvPath' DELIMITER
> ',' CSV
> > HEADER;"
> > psql -h $pgServer -d $pgDatabase -U $pgUser -c $copyCommand
> > how can I debug this?
> >
> >
> > I would start by adding -a and -e after "psql".
> >
> > IIRC Powershell is windows, and in windows shell do not pass
> command
> > words preparsed as in *ix to the executable, but a single command
> > line with the executable must parse. Given the amount of
> quoting, -a
> > and -e will let you see the commands are properly sent, and
> if it is
> > trying to read something what it is.
> >
> > I will also try to substitute the -c with a pipe. If it
> heals, it is
> > probably a quoting issue.
> >
> > Also, I just caught Ron's message, and psql might be waiting
> for a
> > password.
> >
> > Francisco Olarte.
> >
>
> --
> Adrian Klaver
> adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
>
--
Adrian Klaver
adrian.klaver@aklaver.com
On 9/16/24 10:00, Andy Hartman wrote: > in LOG > > 2024-09-16 12:55:37.295 EDT [428] ERROR: invalid byte sequence for > encoding "UTF8": 0x00 > 2024-09-16 12:55:37.295 EDT [428] CONTEXT: COPY > image_classification_master, line 1, column spoolstarttime > I'm heading out the door I can't step you through the process, I can point you at: https://www.postgresql.org/docs/current/multibyte.html#MULTIBYTE-AUTOMATIC-CONVERSION Others will be able to answer the specifics. -- Adrian Klaver adrian.klaver@aklaver.com