Thread: Fwd: postgres instalation
Hello,
I have installed postgres I saw the message postgres installation complete. But when I look in the install directory I only see --
Regards,
Azim
--
Regards,
Azim
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote: > > Hello, > I have installed postgres I saw the message postgres installation > complete. But when I look in the install directory I only see > bin > lib > include > share > > I do not see man and docs, may I know how I can install the man and > docs and what is the use of it? How did you install, from source or via packages? If from source: https://www.postgresql.org/docs/10/static/install-procedure.html "If you want to build everything that can be built, including the documentation (HTML and man pages), and the additional modules (contrib), type instead: make world > > -- > > Regards, > Azim > > > > > -- > > Regards, > Azim > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> > Virus-free. www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> -- Adrian Klaver adrian.klaver@aklaver.com
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote: > > Hello, > I have installed postgres I saw the message postgres installation > complete. But when I look in the install directory I only see > bin > lib > include > share > > I do not see man and docs, may I know how I can install the man and > docs and what is the use of it? How did you install, from source or via packages? If from source: https://www.postgresql.org/docs/10/static/install-procedure.html "If you want to build everything that can be built, including the documentation (HTML and man pages), and the additional modules (contrib), type instead: make world > > -- > > Regards, > Azim > > > > > -- > > Regards, > Azim > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> > Virus-free. www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> -- Adrian Klaver adrian.klaver@aklaver.com
I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres installation complete. But when I look in the install directory I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
"If you want to build everything that can be built, including the documentation (HTML and man pages), and the additional modules (contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon> Virus-free. www.avast.com <https://www.avast.com/sig-ema il?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
--
Adrian Klaver
adrian.klaver@aklaver.com
I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres installation complete. But when I look in the install directory I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
"If you want to build everything that can be built, including the documentation (HTML and man pages), and the additional modules (contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon> Virus-free. www.avast.com <https://www.avast.com/sig-ema il?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
--
Adrian Klaver
adrian.klaver@aklaver.com
On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote: > I built it from source code. > It says contib is installed too. But i dont see thrm under the prefix > directory. When you did the original build did you do make world or just make? See also: https://www.postgresql.org/docs/10/static/install-procedure.html " Installing the Files Note If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster. To install PostgreSQL enter: make install This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted. To install the documentation (HTML and man pages), enter: make install-docs If you built the world above, type instead: make install-world This also installs the documentation. " > > On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com > <mailto:adrian.klaver@aklaver.com>> wrote: > > On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote: > > > Hello, > I have installed postgres I saw the message postgres > installation complete. But when I look in the install directory > I only see > bin > lib > include > share > > I do not see man and docs, may I know how I can install the man > and docs and what is the use of it? > > > How did you install, from source or via packages? > > If from source: > > https://www.postgresql.org/docs/10/static/install-procedure.html > <https://www.postgresql.org/docs/10/static/install-procedure.html> > > "If you want to build everything that can be built, including the > documentation (HTML and man pages), and the additional modules > (contrib), type instead: > > make world > > > > > -- > > Regards, > Azim > > > > > -- > > Regards, > Azim > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>> > Virus-free. www.avast.com <http://www.avast.com> > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>> > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > > > -- > Adrian Klaver > adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com> > -- Adrian Klaver adrian.klaver@aklaver.com
On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote: > I built it from source code. > It says contib is installed too. But i dont see thrm under the prefix > directory. When you did the original build did you do make world or just make? See also: https://www.postgresql.org/docs/10/static/install-procedure.html " Installing the Files Note If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster. To install PostgreSQL enter: make install This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted. To install the documentation (HTML and man pages), enter: make install-docs If you built the world above, type instead: make install-world This also installs the documentation. " > > On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com > <mailto:adrian.klaver@aklaver.com>> wrote: > > On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote: > > > Hello, > I have installed postgres I saw the message postgres > installation complete. But when I look in the install directory > I only see > bin > lib > include > share > > I do not see man and docs, may I know how I can install the man > and docs and what is the use of it? > > > How did you install, from source or via packages? > > If from source: > > https://www.postgresql.org/docs/10/static/install-procedure.html > <https://www.postgresql.org/docs/10/static/install-procedure.html> > > "If you want to build everything that can be built, including the > documentation (HTML and man pages), and the additional modules > (contrib), type instead: > > make world > > > > > -- > > Regards, > Azim > > > > > -- > > Regards, > Azim > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>> > Virus-free. www.avast.com <http://www.avast.com> > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>> > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > > > -- > Adrian Klaver > adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com> > -- Adrian Klaver adrian.klaver@aklaver.com
While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.
use following command:-
make install-docs.
On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:
On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon il?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.
use following command:-
make install-docs.
On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:
On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon il?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= icon>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email& utm_content=webmail&utm_term= link>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
May I know the use for doc and man here.
Additionally I see the doc directory is getting created in the build directory and no the prefix directory I supplied On Tue, Feb 6, 2018 at 11:16 PM, Shreeyansh Dba <shreeyansh2014@gmail.com> wrote:
While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on il?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
--
Regards,
Azim
May I know the use for doc and man here.
Additionally I see the doc directory is getting created in the build directory and no the prefix directory I supplied On Tue, Feb 6, 2018 at 11:16 PM, Shreeyansh Dba <shreeyansh2014@gmail.com> wrote:
While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on il?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
--
Regards,
Azim
I think I fig out what the issue here
under the ./configure i need to mention man directory as well which I was missing On Wed, Feb 7, 2018 at 12:35 AM, Azimuddin Mohammed <azimeiu@gmail.com> wrote:
May I know the use for doc and man here.Additionally I see the doc directory is getting created in the build directory and no the prefix directory I suppliedOn Tue, Feb 6, 2018 at 11:16 PM, Shreeyansh Dba <shreeyansh2014@gmail.com> wrote:While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on il?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
--
Regards,
Azim
--
Regards,
Azim
I think I fig out what the issue here
under the ./configure i need to mention man directory as well which I was missing On Wed, Feb 7, 2018 at 12:35 AM, Azimuddin Mohammed <azimeiu@gmail.com> wrote:
May I know the use for doc and man here.Additionally I see the doc directory is getting created in the build directory and no the prefix directory I suppliedOn Tue, Feb 6, 2018 at 11:16 PM, Shreeyansh Dba <shreeyansh2014@gmail.com> wrote:While you installing PostgreSQL via Source then by default it will contain only (Bin, lib, include, share) if you want to install the documentation (HTML and man pages)
use following command:-
make install-docs.On Wed, Feb 7, 2018 at 9:11 AM, Adrian Klaver <adrian.klaver@aklaver.com> wrote:On 02/06/2018 07:32 PM, Azimuddin Mohammed wrote:I built it from source code.
It says contib is installed too. But i dont see thrm under the prefix directory.
When you did the original build did you do make world or just make?
See also:
https://www.postgresql.org/docs/10/static/install-procedure. html
"
Installing the Files
Note
If you are upgrading an existing system be sure to read Section 18.6 which has instructions about upgrading a cluster.
To install PostgreSQL enter:
make install
This will install files into the directories that were specified in Step 1. Make sure that you have appropriate permissions to write into that area. Normally you need to do this step as root. Alternatively, you can create the target directories in advance and arrange for appropriate permissions to be granted.
To install the documentation (HTML and man pages), enter:
make install-docs
If you built the world above, type instead:
make install-world
This also installs the documentation.
"<https://www.avast.com/sig-ema
On Feb 6, 2018 9:17 PM, "Adrian Klaver" <adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>> wrote:
On 02/06/2018 06:05 PM, Azimuddin Mohammed wrote:
Hello,
I have installed postgres I saw the message postgres
installation complete. But when I look in the install directory
I only see
bin
lib
include
share
I do not see man and docs, may I know how I can install the man
and docs and what is the use of it?
How did you install, from source or via packages?
If from source:
https://www.postgresql.org/docs/10/static/install-procedure. html
<https://www.postgresql.org/docs/10/static/install-procedure .html>
"If you want to build everything that can be built, including the
documentation (HTML and man pages), and the additional modules
(contrib), type instead:
make world
--
Regards,
Azim
--
Regards,
Azim
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on il?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=ic on>> Virus-free. www.avast.com <http://www.avast.com>
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk
<https://www.avast.com/sig-email?utm_medium=email&utm_source =link&utm_campaign=sig-email&u tm_content=webmail&utm_term=li nk>>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- Adrian Klaver
adrian.klaver@aklaver.com <mailto:adrian.klaver@aklaver.com>
--
Adrian Klaver
adrian.klaver@aklaver.com
--
Regards,
Azim
--
Regards,
Azim
On 02/06/2018 11:02 PM, Azimuddin Mohammed wrote: > I think I fig out what the issue here > under the ./configure i need to mention man directory as well which I > was missing > > let me ask this once the installation is I see a message "PostgreSQL > installation complete" how many directories I should be seeing under my > prefix directory Without seeing what you passed to ./configure it is not really possible to answer this. The ./configure settings will be in the config.log file in the directory you ran ./configure. Any particular reason you are not using a package manager to install Postgres? > > I am seeing below files: > > bin > extension > html > include > lib > man1 > man3 > man7 > share > > > Regards, > Azim > -- Adrian Klaver adrian.klaver@aklaver.com
On 02/06/2018 11:02 PM, Azimuddin Mohammed wrote: > I think I fig out what the issue here > under the ./configure i need to mention man directory as well which I > was missing > > let me ask this once the installation is I see a message "PostgreSQL > installation complete" how many directories I should be seeing under my > prefix directory Without seeing what you passed to ./configure it is not really possible to answer this. The ./configure settings will be in the config.log file in the directory you ran ./configure. Any particular reason you are not using a package manager to install Postgres? > > I am seeing below files: > > bin > extension > html > include > lib > man1 > man3 > man7 > share > > > Regards, > Azim > -- Adrian Klaver adrian.klaver@aklaver.com