Thread: pthreads issue when compiling 7.4.8 on AIX 5.3
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) on AIX 5.3 make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes - -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include - -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: /usr/include/pthread.h:652: error: parse error before '*' token /usr/include/pthread.h:655: error: parse error before '*' token /usr/include/pthread.h:658: error: parse error before '*' token /usr/include/pthread.h:661: error: parse error before '*' token /usr/include/pthread.h:664: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:681: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:693: error: parse error before '*' token /usr/include/pthread.h:696: error: parse error before '*' token make[2]: *** [thread.o] Error 1 make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' I've looked into pthread.h and it's refereing to pthread_barrier_t, pthread_barrierattr_t and pthread_spinlock_t. These do not exist in pthread.h on our 5.1 box. However they are defined in sys/types.h which is included up near the top pthread.h. I'm somewhat at a loss about where this could be going wrong. Configure options follow ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 - --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include - --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib - --enable-thread-safety --enable-debug --enable-aix64 Note that this binary will need to have slony support which is why the - --enable-thread-safety. We've had success compiling postgres on AIX 5.1 with identical settings. We're using gcc 3.3.2 The thread_test program fails identically: - -bash-2.05b$ make gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes - -Wmissing-declarations -I../../../src/include - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include - -I/opt/freeware/include -c -o thread_test.o thread_test.c In file included from thread_test.c:23: /usr/include/pthread.h:652: error: parse error before '*' token /usr/include/pthread.h:655: error: parse error before '*' token /usr/include/pthread.h:658: error: parse error before '*' token /usr/include/pthread.h:661: error: parse error before '*' token /usr/include/pthread.h:664: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:681: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:693: error: parse error before '*' token /usr/include/pthread.h:696: error: parse error before '*' token make: *** [thread_test.o] Error 1 - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCsd5bgfzn5SevSpoRAhKzAKC0m1lTZ96bzkpDB4grSGfOTbh3QACggNjo E0PIJkYA5zSTD3Q3z7LQMmM= =ax+Z -----END PGP SIGNATURE-----
Sorry to be dull-minded, but since PG is not threaded (at least on AIX) and works fine, why would Slony (threaded or not) have a problem? There aren't likely to be thread-to-thread interactions, eg. -----Original Message----- From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Andrew Hammond Sent: Thursday, June 16, 2005 4:18 PM To: pgsql-ports@postgresql.org Subject: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) on AIX 5.3 make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes - -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include - -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: /usr/include/pthread.h:652: error: parse error before '*' token /usr/include/pthread.h:655: error: parse error before '*' token /usr/include/pthread.h:658: error: parse error before '*' token /usr/include/pthread.h:661: error: parse error before '*' token /usr/include/pthread.h:664: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:681: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:693: error: parse error before '*' token /usr/include/pthread.h:696: error: parse error before '*' token make[2]: *** [thread.o] Error 1 make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' I've looked into pthread.h and it's refereing to pthread_barrier_t, pthread_barrierattr_t and pthread_spinlock_t. These donot exist in pthread.h on our 5.1 box. However they are defined in sys/types.h which is included up near the top pthread.h. I'm somewhat at a loss about where this could be going wrong. Configure options follow ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 - --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include - --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib - --enable-thread-safety --enable-debug --enable-aix64 Note that this binary will need to have slony support which is why the - --enable-thread-safety. We've had success compiling postgres on AIX 5.1 with identical settings. We're using gcc 3.3.2 The thread_test program fails identically: - -bash-2.05b$ make gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes - -Wmissing-declarations -I../../../src/include - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include - -I/opt/freeware/include -c -o thread_test.o thread_test.c In file included from thread_test.c:23: /usr/include/pthread.h:652: error: parse error before '*' token /usr/include/pthread.h:655: error: parse error before '*' token /usr/include/pthread.h:658: error: parse error before '*' token /usr/include/pthread.h:661: error: parse error before '*' token /usr/include/pthread.h:664: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:681: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:693: error: parse error before '*' token /usr/include/pthread.h:696: error: parse error before '*' token make: *** [thread_test.o] Error 1 - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCsd5bgfzn5SevSpoRAhKzAKC0m1lTZ96bzkpDB4grSGfOTbh3QACggNjo E0PIJkYA5zSTD3Q3z7LQMmM= =ax+Z -----END PGP SIGNATURE----- ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org)
I would look around in sys/types.h to see if there is a #define that is preventing the symbol from being exported. --------------------------------------------------------------------------- Andrew Hammond wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) > on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include > - -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c > In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > pthread.h on our 5.1 box. However they are defined in sys/types.h which > is included up near the top pthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > - > --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > - --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > - --enable-thread-safety. We've had success compiling postgres on AIX 5.1 > with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > - -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../../src/include > - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > - -I/opt/freeware/include -c -o thread_test.o thread_test.c > In file included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > - -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.1 (GNU/Linux) > > iD8DBQFCsd5bgfzn5SevSpoRAhKzAKC0m1lTZ96bzkpDB4grSGfOTbh3QACggNjo > E0PIJkYA5zSTD3Q3z7LQMmM= > =ax+Z > -----END PGP SIGNATURE----- > > ---------------------------(end of broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
Mohan, Ross wrote: > Sorry to be dull-minded, but since PG is not threaded (at least on AIX) > and works fine, why would Slony (threaded or not) have a problem? There > aren't likely to be thread-to-thread interactions, eg. Slony uses a threaded libpq, which is what --enable-thread-safety does. --------------------------------------------------------------------------- > > > -----Original Message----- > From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Andrew Hammond > Sent: Thursday, June 16, 2005 4:18 PM > To: pgsql-ports@postgresql.org > Subject: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 > > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include > - -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, pthread_barrierattr_t and pthread_spinlock_t. Thesedo not exist in pthread.h on our 5.1 box. However they are defined in sys/types.h which is included up near the toppthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > - --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > - --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > - --enable-thread-safety. We've had success compiling postgres on AIX 5.1 with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > - -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../../src/include > - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > - -I/opt/freeware/include -c -o thread_test.o thread_test.c > In file included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > - -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.1 (GNU/Linux) > > iD8DBQFCsd5bgfzn5SevSpoRAhKzAKC0m1lTZ96bzkpDB4grSGfOTbh3QACggNjo > E0PIJkYA5zSTD3Q3z7LQMmM= > =ax+Z > -----END PGP SIGNATURE----- > > ---------------------------(end of broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > > ---------------------------(end of broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
Wow...<light dawning on marble head>....so this means..if I want to do replication, I'll need to rebuild PG with --enable-thread-safety? that's unpleasant news, since, IIRC, it didn't like it at all, first time through. <sigh> Thanks for heads up. -----Original Message----- From: Bruce Momjian [mailto:pgman@candle.pha.pa.us] Sent: Thursday, June 16, 2005 4:29 PM To: Mohan, Ross Cc: pgsql-ports@postgresql.org Subject: Re: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 Mohan, Ross wrote: > Sorry to be dull-minded, but since PG is not threaded (at least on > AIX) and works fine, why would Slony (threaded or not) have a problem? > There aren't likely to be thread-to-thread interactions, eg. Slony uses a threaded libpq, which is what --enable-thread-safety does. --------------------------------------------------------------------------- > > > -----Original Message----- > From: pgsql-ports-owner@postgresql.org > [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Andrew Hammond > Sent: Thursday, June 16, 2005 4:18 PM > To: pgsql-ports@postgresql.org > Subject: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 > > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I'm seeing the following errors when compiling postgres 7.4.8 > (vanilla) on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../src/include > -I/opt/dbs/readline/include > - -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > pthread.h on our 5.1 box. However they are defined in sys/types.h > which is included up near the top pthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > - --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > - --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > - --enable-thread-safety. We've had success compiling postgres on AIX > 5.1 with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > - -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../../src/include > - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > - -I/opt/freeware/include -c -o thread_test.o thread_test.c In file > included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > - -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.1 (GNU/Linux) > > iD8DBQFCsd5bgfzn5SevSpoRAhKzAKC0m1lTZ96bzkpDB4grSGfOTbh3QACggNjo > E0PIJkYA5zSTD3Q3z7LQMmM= > =ax+Z > -----END PGP SIGNATURE----- > > ---------------------------(end of > broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > > ---------------------------(end of > broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Sure enough, there's some _XOPEN_SOURCE magic around them: #if (_XOPEN_SOURCE >= 600) typedef struct { #ifdef __64BIT__ long __sp_word[3]; #else int __sp_word[6]; #endif /* __64BIT__ */ } pthread_spinlock_t; typedef struct { #ifdef __64BIT__ long __br_word[5]; #else int __br_word[8]; #endif /* __64BIT__ */ } pthread_barrier_t; #endif /* _XOPEN_SOURCE >= 600 */ #if (_XOPEN_SOURCE >= 600) typedef void *pthread_barrierattr_t; #endif So... I went hunting to see where _XOPEN_SOURCE is defined and found it in standards.h which is included all over the place, including sys/types.h /* If _XOPEN_SOURCE is defined without a value, or with a value less * than 500 (UNIX98), then set a value, so that #if statements will * work properly. */ #ifdef _XOPEN_SOURCE #if ((_XOPEN_SOURCE + 0) < 500) #undef _XOPEN_SOURCE #define _XOPEN_SOURCE 1 #endif #endif #if defined(_UNIX03) || (_XOPEN_SOURCE==600) #undef _XOPEN_SOURCE #define _XOPEN_SOURCE 600 #undef _XOPEN_SOURCE_EXTENDED #define _XOPEN_SOURCE_EXTENDED 1 #undef _POSIX_C_SOURCE #define _POSIX_C_SOURCE 200112L #undef _THREAD_SAFE #define _THREAD_SAFE #endif #if defined(_UNIX98) || (_XOPEN_SOURCE==500) #undef _XOPEN_SOURCE #define _XOPEN_SOURCE 500 #undef _XOPEN_SOURCE_EXTENDED #define _XOPEN_SOURCE_EXTENDED 1 #endif #ifdef _UNIX95 #undef _XOPEN_SOURCE_EXTENDED #define _XOPEN_SOURCE_EXTENDED 1 #endif #if (_XOPEN_SOURCE_EXTENDED==1) #ifndef _XOPEN_SOURCE #define _XOPEN_SOURCE 1 #endif /* _XOPEN_SOURCE */ #endif /* _XOPEN_SOURCE_EXTENDED */ #ifdef _XOPEN_SOURCE #ifndef _POSIX_SOURCE #define _POSIX_SOURCE #endif #endif I also made sure that it's not being defined or undefined anywhere else in the include paths. Then, I tried overriding the _XOPEN_SOURCE variable on the command line for gcc, but, still no luck. - -bash-2.05b$ gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes - -Wmissing-declarations -I../../../src/include - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include - -I/opt/freeware/include -D _XOPEN_SOURCE=600 -c -o thread_test.o thread_test.c In file included from thread_test.c:23: /usr/include/pthread.h:652: error: parse error before '*' token /usr/include/pthread.h:655: error: parse error before '*' token /usr/include/pthread.h:658: error: parse error before '*' token /usr/include/pthread.h:661: error: parse error before '*' token /usr/include/pthread.h:664: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:681: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:693: error: parse error before '*' token /usr/include/pthread.h:696: error: parse error before '*' token I'd like to believe I'm missing something really obvious here... :) - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A Bruce Momjian wrote: > I would look around in sys/types.h to see if there is a #define that is > preventing the symbol from being exported. > > --------------------------------------------------------------------------- > > Andrew Hammond wrote: > > I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) > on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include > -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c > In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > pthread.h on our 5.1 box. However they are defined in sys/types.h which > is included up near the top pthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > - > --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > --enable-thread-safety. We've had success compiling postgres on AIX 5.1 > with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../../src/include > -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > -I/opt/freeware/include -c -o thread_test.o thread_test.c > In file included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A - ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCse6Rgfzn5SevSpoRArEsAKCho8z4L4A8YfQ4TiISO9bs5dGs6ACgxJB4 laP2NOg4EqlFUjgnscZzWB8= =w6xE -----END PGP SIGNATURE-----
You are not missing something obvious. Keep hunting to see why you are not getting to those defines. --------------------------------------------------------------------------- Andrew Hammond wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Sure enough, there's some _XOPEN_SOURCE magic around them: > > #if (_XOPEN_SOURCE >= 600) > typedef struct > { > #ifdef __64BIT__ > long __sp_word[3]; > #else > int __sp_word[6]; > #endif /* __64BIT__ */ > } > pthread_spinlock_t; > > typedef struct > { > #ifdef __64BIT__ > long __br_word[5]; > #else > int __br_word[8]; > #endif /* __64BIT__ */ > } > pthread_barrier_t; > #endif /* _XOPEN_SOURCE >= 600 */ > > > #if (_XOPEN_SOURCE >= 600) > typedef void *pthread_barrierattr_t; > #endif > > > So... I went hunting to see where _XOPEN_SOURCE is defined and found it > in standards.h which is included all over the place, including sys/types.h > > > /* If _XOPEN_SOURCE is defined without a value, or with a value less > * than 500 (UNIX98), then set a value, so that #if statements will > * work properly. > */ > #ifdef _XOPEN_SOURCE > #if ((_XOPEN_SOURCE + 0) < 500) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 1 > #endif > #endif > > #if defined(_UNIX03) || (_XOPEN_SOURCE==600) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 600 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #undef _POSIX_C_SOURCE > #define _POSIX_C_SOURCE 200112L > #undef _THREAD_SAFE > #define _THREAD_SAFE > #endif > > #if defined(_UNIX98) || (_XOPEN_SOURCE==500) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 500 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #endif > > #ifdef _UNIX95 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #endif > > #if (_XOPEN_SOURCE_EXTENDED==1) > #ifndef _XOPEN_SOURCE > #define _XOPEN_SOURCE 1 > #endif /* _XOPEN_SOURCE */ > #endif /* _XOPEN_SOURCE_EXTENDED */ > > #ifdef _XOPEN_SOURCE > #ifndef _POSIX_SOURCE > #define _POSIX_SOURCE > #endif > #endif > > > I also made sure that it's not being defined or undefined anywhere else > in the include paths. Then, I tried overriding the _XOPEN_SOURCE > variable on the command line for gcc, but, still no luck. > > - -bash-2.05b$ gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > - -Wmissing-declarations -I../../../src/include > - -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > - -I/opt/freeware/include -D _XOPEN_SOURCE=600 -c -o thread_test.o > thread_test.c > In file included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > > I'd like to believe I'm missing something really obvious here... :) > > - -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > > > Bruce Momjian wrote: > > I would look around in sys/types.h to see if there is a #define that is > > preventing the symbol from being exported. > > > > --------------------------------------------------------------------------- > > > > Andrew Hammond wrote: > > > > I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) > > on AIX 5.3 > > > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > > -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include > > -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c > > In file included from thread.c:25: > > /usr/include/pthread.h:652: error: parse error before '*' token > > /usr/include/pthread.h:655: error: parse error before '*' token > > /usr/include/pthread.h:658: error: parse error before '*' token > > /usr/include/pthread.h:661: error: parse error before '*' token > > /usr/include/pthread.h:664: error: parse error before '*' token > > /usr/include/pthread.h:672: error: parse error before '*' token > > /usr/include/pthread.h:675: error: parse error before '*' token > > /usr/include/pthread.h:678: error: parse error before '*' token > > /usr/include/pthread.h:681: error: parse error before '*' token > > /usr/include/pthread.h:689: error: parse error before '*' token > > /usr/include/pthread.h:693: error: parse error before '*' token > > /usr/include/pthread.h:696: error: parse error before '*' token > > make[2]: *** [thread.o] Error 1 > > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > > pthread.h on our 5.1 box. However they are defined in sys/types.h which > > is included up near the top pthread.h. > > > > I'm somewhat at a loss about where this could be going wrong. > > > > Configure options follow > > > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > > - > > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > > - > > --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > > --enable-thread-safety --enable-debug --enable-aix64 > > > > Note that this binary will need to have slony support which is why the > > --enable-thread-safety. We've had success compiling postgres on AIX 5.1 > > with identical settings. We're using gcc 3.3.2 > > > > The thread_test program fails identically: > > > > -bash-2.05b$ make > > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > > -Wmissing-declarations -I../../../src/include > > -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > > -I/opt/freeware/include -c -o thread_test.o thread_test.c > > In file included from thread_test.c:23: > > /usr/include/pthread.h:652: error: parse error before '*' token > > /usr/include/pthread.h:655: error: parse error before '*' token > > /usr/include/pthread.h:658: error: parse error before '*' token > > /usr/include/pthread.h:661: error: parse error before '*' token > > /usr/include/pthread.h:664: error: parse error before '*' token > > /usr/include/pthread.h:672: error: parse error before '*' token > > /usr/include/pthread.h:675: error: parse error before '*' token > > /usr/include/pthread.h:678: error: parse error before '*' token > > /usr/include/pthread.h:681: error: parse error before '*' token > > /usr/include/pthread.h:689: error: parse error before '*' token > > /usr/include/pthread.h:693: error: parse error before '*' token > > /usr/include/pthread.h:696: error: parse error before '*' token > > make: *** [thread_test.o] Error 1 > > > > -- > > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > > Database Administrator, Afilias Canada Corp. > > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > > - ---------------------------(end of broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) > > > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.1 (GNU/Linux) > > iD8DBQFCse6Rgfzn5SevSpoRArEsAKCho8z4L4A8YfQ4TiISO9bs5dGs6ACgxJB4 > laP2NOg4EqlFUjgnscZzWB8= > =w6xE > -----END PGP SIGNATURE----- > > ---------------------------(end of broadcast)--------------------------- > TIP 9: the planner will ignore your desire to choose an index scan if your > joining column's datatypes do not match > -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
In an attempt to throw the authorities off his trail, RMohan@arbinet.com ("Mohan, Ross") transmitted: > Sorry to be dull-minded, but since PG is not threaded (at least on AIX) > and works fine, why would Slony (threaded or not) have a problem? There > aren't likely to be thread-to-thread interactions, eg. The "slon" application that performs replication *IS* a multi-threaded application where each of those threads accesses libpq. --enable-thread-safety is *most certainly* necessary in order for libpq to be thread-safe so that slon can operate. That is why "thread safety" is necessary. -- "cbbrowne","@","gmail.com" http://linuxdatabases.info/info/slony.html When man stands on toilet, man is high on pot. -Confucius
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mohan, Ross wrote: > Wow...<light dawning on marble head>....so this means..if I want to > do replication, I'll need to rebuild PG with --enable-thread-safety? > > that's unpleasant news, since, IIRC, it didn't like it at all, first > time through. > > <sigh> > > Thanks for heads up. No problem. I haven't had any luck tracking down this issue. If you do, I'd be very glad to hear about it. Drew > -----Original Message----- > From: Bruce Momjian [mailto:pgman@candle.pha.pa.us] > Sent: Thursday, June 16, 2005 4:29 PM > To: Mohan, Ross > Cc: pgsql-ports@postgresql.org > Subject: Re: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 > > > Mohan, Ross wrote: > >>Sorry to be dull-minded, but since PG is not threaded (at least on >>AIX) and works fine, why would Slony (threaded or not) have a problem? >>There aren't likely to be thread-to-thread interactions, eg. > > > Slony uses a threaded libpq, which is what --enable-thread-safety does. > > --------------------------------------------------------------------------- > > > >> >>-----Original Message----- >>From: pgsql-ports-owner@postgresql.org >>[mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Andrew Hammond >>Sent: Thursday, June 16, 2005 4:18 PM >>To: pgsql-ports@postgresql.org >>Subject: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 >> >> > I'm seeing the following errors when compiling postgres 7.4.8 > (vanilla) on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../src/include > -I/opt/dbs/readline/include > -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > pthread.h on our 5.1 box. However they are defined in sys/types.h > which is included up near the top pthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > --enable-thread-safety. We've had success compiling postgres on AIX > 5.1 with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../../src/include > -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > -I/opt/freeware/include -c -o thread_test.o thread_test.c In file > included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A - ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) - ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCuwElgfzn5SevSpoRAoEuAJ0b2YfR9qPz8zlOY5gIoW0e/lJM9gCcCG4F rct4f2CzomdOM7gmKwOHA0Y= =ICyX -----END PGP SIGNATURE-----
I can build PG now...use it a bit, but CANNOT make the tsearch2 contrib module. Kind of a pain. But whatever I can add/say to be of assistance, I am glad to offer. - Ross -----Original Message----- From: Andrew Hammond [mailto:ahammond@ca.afilias.info] Sent: Thursday, June 23, 2005 2:36 PM To: Mohan, Ross Cc: pgsql-ports@postgresql.org Subject: Re: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mohan, Ross wrote: > Wow...<light dawning on marble head>....so this means..if I want to do > replication, I'll need to rebuild PG with --enable-thread-safety? > > that's unpleasant news, since, IIRC, it didn't like it at all, first > time through. > > <sigh> > > Thanks for heads up. No problem. I haven't had any luck tracking down this issue. If you do, I'd be very glad to hear about it. Drew > -----Original Message----- > From: Bruce Momjian [mailto:pgman@candle.pha.pa.us] > Sent: Thursday, June 16, 2005 4:29 PM > To: Mohan, Ross > Cc: pgsql-ports@postgresql.org > Subject: Re: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 > > > Mohan, Ross wrote: > >>Sorry to be dull-minded, but since PG is not threaded (at least on >>AIX) and works fine, why would Slony (threaded or not) have a problem? >>There aren't likely to be thread-to-thread interactions, eg. > > > Slony uses a threaded libpq, which is what --enable-thread-safety > does. > > ---------------------------------------------------------------------- > ----- > > > >> >>-----Original Message----- >>From: pgsql-ports-owner@postgresql.org >>[mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Andrew Hammond >>Sent: Thursday, June 16, 2005 4:18 PM >>To: pgsql-ports@postgresql.org >>Subject: [PORTS] pthreads issue when compiling 7.4.8 on AIX 5.3 >> >> > I'm seeing the following errors when compiling postgres 7.4.8 > (vanilla) on AIX 5.3 > > make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include > -I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c In file included from thread.c:25: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make[2]: *** [thread.o] Error 1 > make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' > > I've looked into pthread.h and it's refereing to pthread_barrier_t, > pthread_barrierattr_t and pthread_spinlock_t. These do not exist in > pthread.h on our 5.1 box. However they are defined in sys/types.h > which is included up near the top pthread.h. > > I'm somewhat at a loss about where this could be going wrong. > > Configure options follow > > ./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 > - > --with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include > --with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib > --enable-thread-safety --enable-debug --enable-aix64 > > Note that this binary will need to have slony support which is why the > --enable-thread-safety. We've had success compiling postgres on AIX > 5.1 with identical settings. We're using gcc 3.3.2 > > The thread_test program fails identically: > > -bash-2.05b$ make > gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../../src/include > -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > -I/opt/freeware/include -c -o thread_test.o thread_test.c In file > included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > make: *** [thread_test.o] Error 1 > > -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A - ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) - ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to majordomo@postgresql.org) - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCuwElgfzn5SevSpoRAoEuAJ0b2YfR9qPz8zlOY5gIoW0e/lJM9gCcCG4F rct4f2CzomdOM7gmKwOHA0Y= =ICyX -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I spoke with our IBM sales reps about this and they suggested we upgrade GCC to 3.3.3 or later. Their PMR for this is PMR25534,077,649 if you happen to need the reference. We upgraded to 4.0.1 and got it to compile. We're now seeing the same socket bug as everyone else. Chris Browne filed a bug report with IBM and has opened PMR29657,500. We hope to see resolution shortly. - -- Andrew Hammond 416-673-4138 ahammond@ca.afilias.info Database Administrator, Afilias Canada Corp. CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A Andrew Hammond wrote: > Sure enough, there's some _XOPEN_SOURCE magic around them: > > #if (_XOPEN_SOURCE >= 600) > typedef struct > { > #ifdef __64BIT__ > long __sp_word[3]; > #else > int __sp_word[6]; > #endif /* __64BIT__ */ > } > pthread_spinlock_t; > > typedef struct > { > #ifdef __64BIT__ > long __br_word[5]; > #else > int __br_word[8]; > #endif /* __64BIT__ */ > } > pthread_barrier_t; > #endif /* _XOPEN_SOURCE >= 600 */ > > > #if (_XOPEN_SOURCE >= 600) > typedef void *pthread_barrierattr_t; > #endif > > > So... I went hunting to see where _XOPEN_SOURCE is defined and found it > in standards.h which is included all over the place, including sys/types.h > > > /* If _XOPEN_SOURCE is defined without a value, or with a value less > * than 500 (UNIX98), then set a value, so that #if statements will > * work properly. > */ > #ifdef _XOPEN_SOURCE > #if ((_XOPEN_SOURCE + 0) < 500) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 1 > #endif > #endif > > #if defined(_UNIX03) || (_XOPEN_SOURCE==600) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 600 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #undef _POSIX_C_SOURCE > #define _POSIX_C_SOURCE 200112L > #undef _THREAD_SAFE > #define _THREAD_SAFE > #endif > > #if defined(_UNIX98) || (_XOPEN_SOURCE==500) > #undef _XOPEN_SOURCE > #define _XOPEN_SOURCE 500 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #endif > > #ifdef _UNIX95 > #undef _XOPEN_SOURCE_EXTENDED > #define _XOPEN_SOURCE_EXTENDED 1 > #endif > > #if (_XOPEN_SOURCE_EXTENDED==1) > #ifndef _XOPEN_SOURCE > #define _XOPEN_SOURCE 1 > #endif /* _XOPEN_SOURCE */ > #endif /* _XOPEN_SOURCE_EXTENDED */ > > #ifdef _XOPEN_SOURCE > #ifndef _POSIX_SOURCE > #define _POSIX_SOURCE > #endif > #endif > > > I also made sure that it's not being defined or undefined anywhere else > in the include paths. Then, I tried overriding the _XOPEN_SOURCE > variable on the command line for gcc, but, still no luck. > > -bash-2.05b$ gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes > -Wmissing-declarations -I../../../src/include > -I/opt/dbs/readline/include -I/opt/dbs/zlib/include > -I/opt/freeware/include -D _XOPEN_SOURCE=600 -c -o thread_test.o > thread_test.c > In file included from thread_test.c:23: > /usr/include/pthread.h:652: error: parse error before '*' token > /usr/include/pthread.h:655: error: parse error before '*' token > /usr/include/pthread.h:658: error: parse error before '*' token > /usr/include/pthread.h:661: error: parse error before '*' token > /usr/include/pthread.h:664: error: parse error before '*' token > /usr/include/pthread.h:672: error: parse error before '*' token > /usr/include/pthread.h:675: error: parse error before '*' token > /usr/include/pthread.h:678: error: parse error before '*' token > /usr/include/pthread.h:681: error: parse error before '*' token > /usr/include/pthread.h:689: error: parse error before '*' token > /usr/include/pthread.h:693: error: parse error before '*' token > /usr/include/pthread.h:696: error: parse error before '*' token > > I'd like to believe I'm missing something really obvious here... :) > > -- > Andrew Hammond 416-673-4138 ahammond@ca.afilias.info > Database Administrator, Afilias Canada Corp. > CB83 2838 4B67 D40F D086 3568 81FC E7E5 27AF 4A9A > > > Bruce Momjian wrote: > >>>I would look around in sys/types.h to see if there is a #define that is >>>preventing the symbol from being exported. >>> >>>--------------------------------------------------------------------------- >>> >>>Andrew Hammond wrote: >>> >>>I'm seeing the following errors when compiling postgres 7.4.8 (vanilla) >>>on AIX 5.3 >>> >>>make[2]: Entering directory `/opt/src/postgresql-7.4.8/src/port' >>>gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes >>>-Wmissing-declarations -I../../src/include -I/opt/dbs/readline/include >>>-I/opt/dbs/zlib/include -I/opt/freeware/include -c thread.c >>>In file included from thread.c:25: >>>/usr/include/pthread.h:652: error: parse error before '*' token >>>/usr/include/pthread.h:655: error: parse error before '*' token >>>/usr/include/pthread.h:658: error: parse error before '*' token >>>/usr/include/pthread.h:661: error: parse error before '*' token >>>/usr/include/pthread.h:664: error: parse error before '*' token >>>/usr/include/pthread.h:672: error: parse error before '*' token >>>/usr/include/pthread.h:675: error: parse error before '*' token >>>/usr/include/pthread.h:678: error: parse error before '*' token >>>/usr/include/pthread.h:681: error: parse error before '*' token >>>/usr/include/pthread.h:689: error: parse error before '*' token >>>/usr/include/pthread.h:693: error: parse error before '*' token >>>/usr/include/pthread.h:696: error: parse error before '*' token >>>make[2]: *** [thread.o] Error 1 >>>make[2]: Leaving directory `/opt/src/postgresql-7.4.8/src/port' >>> >>>I've looked into pthread.h and it's refereing to pthread_barrier_t, >>>pthread_barrierattr_t and pthread_spinlock_t. These do not exist in >>>pthread.h on our 5.1 box. However they are defined in sys/types.h which >>>is included up near the top pthread.h. >>> >>>I'm somewhat at a loss about where this could be going wrong. >>> >>>Configure options follow >>> >>>./configure --prefix=/opt/dbs/pgsql748-slony105-AIX53-2005-06-13 >>>- >>>--with-includes=/opt/dbs/readline/include:/opt/dbs/zlib/include:/usr/ccs/include:/opt/freeware/include:/usr/local/include >>>- >>>--with-libraries=/opt/dbs/readline/lib:/opt/dbs/zlib/lib:/usr/ccs/lib:/opt/freeware/lib:/usr/local/lib >>>--enable-thread-safety --enable-debug --enable-aix64 >>> >>>Note that this binary will need to have slony support which is why the >>>--enable-thread-safety. We've had success compiling postgres on AIX 5.1 >>>with identical settings. We're using gcc 3.3.2 >>> >>>The thread_test program fails identically: >>> >>>-bash-2.05b$ make >>>gcc -O2 -fno-strict-aliasing -g -Wall -Wmissing-prototypes >>>-Wmissing-declarations -I../../../src/include >>>-I/opt/dbs/readline/include -I/opt/dbs/zlib/include >>>-I/opt/freeware/include -c -o thread_test.o thread_test.c >>>In file included from thread_test.c:23: >>>/usr/include/pthread.h:652: error: parse error before '*' token >>>/usr/include/pthread.h:655: error: parse error before '*' token >>>/usr/include/pthread.h:658: error: parse error before '*' token >>>/usr/include/pthread.h:661: error: parse error before '*' token >>>/usr/include/pthread.h:664: error: parse error before '*' token >>>/usr/include/pthread.h:672: error: parse error before '*' token >>>/usr/include/pthread.h:675: error: parse error before '*' token >>>/usr/include/pthread.h:678: error: parse error before '*' token >>>/usr/include/pthread.h:681: error: parse error before '*' token >>>/usr/include/pthread.h:689: error: parse error before '*' token >>>/usr/include/pthread.h:693: error: parse error before '*' token >>>/usr/include/pthread.h:696: error: parse error before '*' token >>>make: *** [thread_test.o] Error 1 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFC1SOCgfzn5SevSpoRAjsGAKDG3EkPdnxgIIC+z8vpCTfLoi7iIACeOUs1 pomEePohqz7wE5ly7+lVQ8k= =M1Qr -----END PGP SIGNATURE-----