I have applied the following patch to clean up some quoting in
configure.in. configure output file did not change.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
Index: configure.in
===================================================================
RCS file: /cvsroot/pgsql-server/configure.in,v
retrieving revision 1.222
diff -c -c -r1.222 configure.in
*** configure.in 15 Dec 2002 03:16:58 -0000 1.222
--- configure.in 29 Dec 2002 03:25:46 -0000
***************
*** 618,627 ****
AC_CHECK_LIB(resolv, main)
AC_SEARCH_LIBS(getopt_long, [getopt gnugetopt])
# QNX:
! AC_CHECK_LIB([[unix]], main)
AC_SEARCH_LIBS(crypt, crypt)
# BeOS:
! AC_CHECK_LIB(bind, __inet_ntoa)
# Solaris:
AC_SEARCH_LIBS(fdatasync, [rt posix4])
# Cygwin:
--- 618,627 ----
AC_CHECK_LIB(resolv, main)
AC_SEARCH_LIBS(getopt_long, [getopt gnugetopt])
# QNX:
! AC_CHECK_LIB(unix, main)
AC_SEARCH_LIBS(crypt, crypt)
# BeOS:
! AC_CHECK_LIB(bind, __inet_ntoa)
# Solaris:
AC_SEARCH_LIBS(fdatasync, [rt posix4])
# Cygwin:
***************
*** 646,653 ****
fi
if test "$with_krb4" = yes ; then
! AC_CHECK_LIB(des, [des_encrypt], [], [AC_MSG_ERROR([library 'des' is required for Kerberos 4])])
! AC_CHECK_LIB(krb, [krb_sendauth], [], [AC_MSG_ERROR([library 'krb' is required for Kerberos 4])])
fi
if test "$with_krb5" = yes ; then
--- 646,653 ----
fi
if test "$with_krb4" = yes ; then
! AC_CHECK_LIB(des, des_encrypt, [], [AC_MSG_ERROR([library 'des' is required for Kerberos 4])])
! AC_CHECK_LIB(krb, krb_sendauth, [], [AC_MSG_ERROR([library 'krb' is required for Kerberos 4])])
fi
if test "$with_krb5" = yes ; then
***************
*** 661,672 ****
if test "$with_openssl" = yes ; then
dnl Order matters!
! AC_CHECK_LIB(crypto, [CRYPTO_new_ex_data], [], [AC_MSG_ERROR([library 'crypto' is required for OpenSSL])])
! AC_CHECK_LIB(ssl, [SSL_library_init], [], [AC_MSG_ERROR([library 'ssl' is required for OpenSSL])])
fi
if test "$with_pam" = yes ; then
! AC_CHECK_LIB(pam, [pam_start], [], [AC_MSG_ERROR([library 'pam' is required for PAM])])
fi
--- 661,672 ----
if test "$with_openssl" = yes ; then
dnl Order matters!
! AC_CHECK_LIB(crypto, CRYPTO_new_ex_data, [], [AC_MSG_ERROR([library 'crypto' is required for OpenSSL])])
! AC_CHECK_LIB(ssl, SSL_library_init, [], [AC_MSG_ERROR([library 'ssl' is required for OpenSSL])])
fi
if test "$with_pam" = yes ; then
! AC_CHECK_LIB(pam, pam_start, [], [AC_MSG_ERROR([library 'pam' is required for PAM])])
fi
***************
*** 679,686 ****
# At least on IRIX, cpp test for netinet/tcp.h will fail unless
# netinet/in.h is included first.
! AC_CHECK_HEADERS([netinet/in.h])
! AC_CHECK_HEADERS([netinet/tcp.h], [], [],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
--- 679,686 ----
# At least on IRIX, cpp test for netinet/tcp.h will fail unless
# netinet/in.h is included first.
! AC_CHECK_HEADERS(netinet/in.h)
! AC_CHECK_HEADERS(netinet/tcp.h, [], [],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
***************
*** 688,701 ****
])
if test "$with_readline" = yes; then
! AC_CHECK_HEADERS([readline/readline.h], [],
! [AC_CHECK_HEADERS([readline.h], [],
[AC_MSG_ERROR([readline header not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use --without-readline to disable readline support.])])])
! AC_CHECK_HEADERS([readline/history.h], [],
! [AC_CHECK_HEADERS([history.h], [],
[AC_MSG_ERROR([history header not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
--- 688,701 ----
])
if test "$with_readline" = yes; then
! AC_CHECK_HEADERS(readline/readline.h, [],
! [AC_CHECK_HEADERS(readline.h, [],
[AC_MSG_ERROR([readline header not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use --without-readline to disable readline support.])])])
! AC_CHECK_HEADERS(readline/history.h, [],
! [AC_CHECK_HEADERS(history.h, [],
[AC_MSG_ERROR([history header not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
***************
*** 719,730 ****
fi
if test "$with_openssl" = yes ; then
! AC_CHECK_HEADER([openssl/ssl.h], [], [AC_MSG_ERROR([header file <openssl/ssl.h> is required for OpenSSL])])
! AC_CHECK_HEADER([openssl/err.h], [], [AC_MSG_ERROR([header file <openssl/err.h> is required for OpenSSL])])
fi
if test "$with_pam" = yes ; then
! AC_CHECK_HEADER([security/pam_appl.h], [], [AC_MSG_ERROR([header file <security/pam_appl.h> is required for PAM])])
fi
--- 719,730 ----
fi
if test "$with_openssl" = yes ; then
! AC_CHECK_HEADER(openssl/ssl.h, [], [AC_MSG_ERROR([header file <openssl/ssl.h> is required for OpenSSL])])
! AC_CHECK_HEADER(openssl/err.h, [], [AC_MSG_ERROR([header file <openssl/err.h> is required for OpenSSL])])
fi
if test "$with_pam" = yes ; then
! AC_CHECK_HEADER(security/pam_appl.h, [], [AC_MSG_ERROR([header file <security/pam_appl.h> is required for PAM])])
fi
***************
*** 758,770 ****
if test "$with_krb5" = yes; then
# Check for differences between MIT and Heimdal (KTH) releases
! AC_CHECK_MEMBERS([krb5_ticket.enc_part2], [],
[AC_CHECK_MEMBERS([krb5_ticket.client], [],
[AC_MSG_ERROR([could not determine how to get client name from Kerberos 5
ticket])],
[#include <krb5.h>])],
[#include <krb5.h>])
! AC_CHECK_MEMBERS([krb5_error.text.data], [],
! [AC_CHECK_MEMBERS([krb5_error.e_data], [],
[AC_MSG_ERROR([could not determine how to extract Kerberos 5 error messages])],
[#include <krb5.h>])],
[#include <krb5.h>])
--- 758,770 ----
if test "$with_krb5" = yes; then
# Check for differences between MIT and Heimdal (KTH) releases
! AC_CHECK_MEMBERS(krb5_ticket.enc_part2, [],
[AC_CHECK_MEMBERS([krb5_ticket.client], [],
[AC_MSG_ERROR([could not determine how to get client name from Kerberos 5
ticket])],
[#include <krb5.h>])],
[#include <krb5.h>])
! AC_CHECK_MEMBERS(krb5_error.text.data, [],
! [AC_CHECK_MEMBERS(krb5_error.e_data, [],
[AC_MSG_ERROR([could not determine how to extract Kerberos 5 error messages])],
[#include <krb5.h>])],
[#include <krb5.h>])
***************
*** 1096,1102 ****
# We also check for sig_atomic_t, which *should* be defined per ANSI
# C, but is missing on some old platforms.
! AC_CHECK_TYPES([sig_atomic_t], [], [], [#include <signal.h>])
PGAC_FUNC_POSIX_SIGNALS
--- 1096,1102 ----
# We also check for sig_atomic_t, which *should* be defined per ANSI
# C, but is missing on some old platforms.
! AC_CHECK_TYPES(sig_atomic_t, [], [], [#include <signal.h>])
PGAC_FUNC_POSIX_SIGNALS
***************
*** 1149,1155 ****
#
PGAC_PROG_NSGMLS
PGAC_PROG_JADE
! PGAC_CHECK_DOCBOOK([3.1])
PGAC_PATH_DOCBOOK_STYLESHEETS
PGAC_PATH_COLLATEINDEX
AC_CHECK_PROGS(SGMLSPL, sgmlspl)
--- 1149,1155 ----
#
PGAC_PROG_NSGMLS
PGAC_PROG_JADE
! PGAC_CHECK_DOCBOOK(3.1)
PGAC_PATH_DOCBOOK_STYLESHEETS
PGAC_PATH_COLLATEINDEX
AC_CHECK_PROGS(SGMLSPL, sgmlspl)
