Thread: problem with archive_command as suggested by documentation
The documentation states in http://www.postgresql.org/docs/current/static/continuous-archiving.html#BACKUP-ARCHIVING-WAL "The archive command should generally be designed to refuse to overwrite any pre-existing archive file." and suggests an archive_command like "test ! -f .../%f && cp %p .../%f". We ran into (small) problems with an archive_command similar to this as follows: The server received a fast shutdown request while a WAL segment was being archived. The archiver stopped and left behind a half-written archive file. Now when the server was restarted, the archiver tried to archive the same WAL segment again and got an error because the destination file already existed. That means that WAL archiving is stuck until somebody manually removes the partial archived file. I suggest that the documentation be changed so that it does not recommend this setup. WAL segment names are unique anyway. What is your opinion? Is the problem I encountered a corner case that should be ignored? Yours, Laurenz Albe
Albe Laurenz wrote: > The documentation states in > http://www.postgresql.org/docs/current/static/continuous-archiving.html#BACKUP-ARCHIVING-WAL > > "The archive command should generally be designed to refuse to overwrite any pre-existing archive file." > > and suggests an archive_command like "test ! -f .../%f && cp %p .../%f". > > We ran into (small) problems with an archive_command similar to this > as follows: > > The server received a fast shutdown request while a WAL segment was being archived. > The archiver stopped and left behind a half-written archive file. Hmm, if I'm reading the code correctly, a fast shutdown request shouldn't kill an ongoing archive command. > Now when the server was restarted, the archiver tried to archive the same > WAL segment again and got an error because the destination file already > existed. > > That means that WAL archiving is stuck until somebody manually removes > the partial archived file. Yeah, that's a good point. Even if it turns out that the reason for your partial write wasn't the fast shutdown request,the archive_command could be interrupted for some other reason and leave behind a partially written file behind. > I suggest that the documentation be changed so that it does not > recommend this setup. WAL segment names are unique anyway. Well, the documentation states the reason to do that: > This is an important safety feature to preserve the integrity of your archive in case of administrator error (such as sendingthe output of two different servers to the same archive directory) which seems like a reasonable concern too. Perhaps it should suggest something like: test ! -f .../%f && cp %p .../%f.tmp && mv .../%f.tmp .../%f ie. copy under a different filename first, and rename the file in place after it's completely written, assuming that mv is atomic. It gets a bit complicated, though. -- Heikki Linnakangas EnterpriseDB http://www.enterprisedb.com
On Jan 22, 2009, at 10:18 AM, Albe Laurenz wrote: > "The archive command should generally be designed to refuse to > overwrite any pre-existing archive file." ... > The server received a fast shutdown request while a WAL segment was > being archived. > The archiver stopped and left behind a half-written archive file. > > Now when the server was restarted, the archiver tried to archive > the same > WAL segment again and got an error because the destination file > already > existed. > > That means that WAL archiving is stuck until somebody manually removes > the partial archived file. > > > I suggest that the documentation be changed so that it does not > recommend this setup. WAL segment names are unique anyway. > > What is your opinion? Is the problem I encountered a corner case > that should be ignored? The test is recommended because if you accidentally set two different clusters to archive to the same location you'll trash everything. I don't know of a good work-around; IIRC we used to leave the archive command to complete, but that could seriously delay shutdown so it was changed. I don't think we created an option to control that behavior. -- Decibel!, aka Jim C. Nasby, Database Architect decibel@decibel.org Give your computer some brain candy! www.distributed.net Team #1828
Heikki Linnakangas wrote: > > The documentation states > > > > "The archive command should generally be designed to refuse to overwrite any pre-existing archive file." > > > > and suggests an archive_command like "test ! -f .../%f && cp %p .../%f". > > > > We ran into (small) problems with an archive_command similar to this > > as follows: > > > > The server received a fast shutdown request while a WAL segment was being archived. > > The archiver stopped and left behind a half-written archive file. > > Hmm, if I'm reading the code correctly, a fast shutdown request > shouldn't kill an ongoing archive command. Maybe it died because of a signal 1, I don't know. But it left behind a half-written file. > > Now when the server was restarted, the archiver tried to archive the same > > WAL segment again and got an error because the destination file already > > existed. > > > > That means that WAL archiving is stuck until somebody manually removes > > the partial archived file. > > Yeah, that's a good point. Even if it turns out that the reason for your > partial write wasn't the fast shutdown request, the archive_command > could be interrupted for some other reason and leave behind a partially > written file behind. > > > I suggest that the documentation be changed so that it does not > > recommend this setup. WAL segment names are unique anyway. > > Well, the documentation states the reason to do that: > > > This is an important safety feature to preserve the > integrity of your archive in case of administrator error > (such as sending the output of two different servers to the > same archive directory) > > which seems like a reasonable concern too. Of course, that's why I did that at first. But isn't it true that the vast majority of people have only one PostgreSQL cluster per machine, and it is highly unlikely that somebody else creates a file with the same name as a WAL segment in the archive directory? > Perhaps it should suggest > something like: > > test ! -f .../%f && cp %p .../%f.tmp && mv .../%f.tmp .../%f > > ie. copy under a different filename first, and rename the file in place > after it's completely written, assuming that mv is atomic. It gets a bit > complicated, though. That's a good idea (although it could lead to race conditions in the extremely rare case that two clusters want to archive equally named files at the same time). I'll write a patch for that and send it as basis for a discussion. Yours, Laurenz Albe
On Fri, 2009-01-23 at 08:20 +0100, Albe Laurenz wrote: > > Perhaps it should suggest > > something like: > > > > test ! -f .../%f && cp %p .../%f.tmp && mv .../%f.tmp .../%f > > > > ie. copy under a different filename first, and rename the file in place > > after it's completely written, assuming that mv is atomic. It gets a bit > > complicated, though. > > That's a good idea (although it could lead to race conditions in the > extremely rare case that two clusters want to archive equally named > files at the same time). > > I'll write a patch for that and send it as basis for a discussion. The example is to help you understand things, not to solve every case. I think it should start simply and then have additional comments later. I don't think that particular example is a good one since the whole point of the archive is that it should be off-server. If we're going to be exact about the example then we should give a more realistic one, like using scp. Unfortunately, there is no secure-remote-move command, so doing the above with scp would resend the whole file 3 times. I think it's better to write a script... -- Simon Riggs www.2ndQuadrant.comPostgreSQL Training, Services and Support
"Albe Laurenz" <laurenz.albe@wien.gv.at> writes:
> Heikki Linnakangas wrote:
>> Well, the documentation states the reason to do that:
>>
>> This is an important safety feature to preserve the
>> integrity of your archive in case of administrator error
>> (such as sending the output of two different servers to the
>> same archive directory)
> But isn't it true that the vast majority of people have only one
> PostgreSQL cluster per machine, and it is highly unlikely that
> somebody else creates a file with the same name as a WAL segment
> in the archive directory?
That's not the point. You'd typically be sending the WAL archive to
another machine (via NFS or FTP or whatever), and it's not very hard at
all to imagine accidentally setting up two different machines to point
at the same archive directory on the same backup server. For instance,
imagine that you're cloning your DB in preparation for an upgrade.
You'll probably start by copying your configuration file...
regards, tom lane
Simon Riggs wrote: > I don't think that particular example is a good one since the whole > point of the archive is that it should be off-server. If we're going to > be exact about the example then we should give a more realistic one, > like using scp. Unfortunately, there is no secure-remote-move command, > so doing the above with scp would resend the whole file 3 times. I think > it's better to write a script... The problem is that most people do copy the stuff straight out of the documentation. And for those that do write a separate script, there are still a lot of possibilities to get it wrong. There are only about a handful of transportation protocols appearing in practice, so it would be very helpful to provide carefully reviewed scripts or recipes for these.
Peter Eisentraut wrote: >> I don't think that particular example is a good one since the whole >> point of the archive is that it should be off-server. If we're going to >> be exact about the example then we should give a more realistic one, >> like using scp. Unfortunately, there is no secure-remote-move command, >> so doing the above with scp would resend the whole file 3 times. I think >> it's better to write a script... > > The problem is that most people do copy the stuff straight out of the > documentation. And for those that do write a separate script, there are > still a lot of possibilities to get it wrong. > > There are only about a handful of transportation protocols appearing in > practice, so it would be very helpful to provide carefully reviewed > scripts or recipes for these. I'll try to come up with something, but it will take some time; an impending addition to the family currently has priority... Yours, Laurenz Albe
On Mon, Jan 26, 2009 at 04:40:12PM +0100, Albe Laurenz wrote: > Peter Eisentraut wrote: > >> I don't think that particular example is a good one since the > >> whole point of the archive is that it should be off-server. If > >> we're going to be exact about the example then we should give a > >> more realistic one, like using scp. Unfortunately, there is no > >> secure-remote-move command, so doing the above with scp would > >> resend the whole file 3 times. I think it's better to write a > >> script... > > > > The problem is that most people do copy the stuff straight out of > > the documentation. And for those that do write a separate script, > > there are still a lot of possibilities to get it wrong. > > > > There are only about a handful of transportation protocols > > appearing in practice, so it would be very helpful to provide > > carefully reviewed scripts or recipes for these. > > I'll try to come up with something, but it will take some time; an > impending addition to the family currently has priority... You understand that this means you need to provide blue-elephant-themed photos, right? Congratulations! :) Cheers, David. -- David Fetter <david@fetter.org> http://fetter.org/ Phone: +1 415 235 3778 AIM: dfetter666 Yahoo!: dfetter Skype: davidfetter XMPP: david.fetter@gmail.com Remember to vote! Consider donating to Postgres: http://www.postgresql.org/about/donate