Thread: postgis 1.5.2 installation configure: WARNING: could not locate CUnit required for liblwgeom unit tests

Hi All -

It's just a warning, continue happily onwards. Just means a few unit tests won't be run.

installation was successful. But it did not install the liblwgeom.so 

Please pardon my ignorance. The reason I am worried about it is, when I tried to use pg_upgrade to migrate from 8.3 to 9.0.2. I am getting an error

Well, maybe you could in-place upgrade if you left your PostGIS version at the original and only upgraded the PostgreSQL part, but you aren't doing that, you're also upgrading your PostGIS version.

I'm not sure you can in-place upgrade a postgis database...

On 07/02/11 18.55, Paul Ramsey wrote:
> Well, maybe you could in-place upgrade if you left your PostGIS version
> at the original and only upgraded the PostgreSQL part, but you aren't
> doing that, you're also upgrading your PostGIS version.
>
> pg_dump the database
> create a new database on the new server, install postgis in it
> pg_restore the database
I am at the beginning with postigis. This is also my way to copy the
data from one machine to another. I have the same server in both the
machines (postgresql 8.4 + postgis 1.5), no errors during this process.

> ignore the many errors
this sentence scares me a bit (for my future)... what kind of errors?


Edoardo



> On 2011-02-07, at 9:49 AM, akp geek wrote:
>
>>
>> Please pardon my ignorance. The reason I am worried about it is, when
>> I tried to use pg_upgrade to migrate from 8.3 to 9.0.2. I am getting
>> an error
>>
>> Failed to load library: $libdir/liblwgeom
>> ERROR: could not access file "$libdir/liblwgeom": No such file or
>> directory
>>
>> I am using pg_upgrade for upgrading
>>
>>
>> Regards
>>
>> On Mon, Feb 7, 2011 at 12:39 PM, Paul Ramsey
>> <pramsey@cleverelephant.ca <mailto:pramsey@cleverelephant.ca>> wrote:
>>
>>     It's not a dynlib, it's statically linked at build time, so have
>>     no fear. Stop thinking so much :)
>>     P
>>
>>     On 2011-02-07, at 9:38 AM, akp geek wrote:
>>
>>>     installation was successful. But it did not install the liblwgeom.so
>>>
>>>     Regards
>>>
>>>     On Mon, Feb 7, 2011 at 12:29 PM, Paul Ramsey
>>>     <pramsey@cleverelephant.ca <mailto:pramsey@cleverelephant.ca>> wrote:
>>>
>>>         It's just a warning, continue happily onwards. Just means a
>>>         few unit tests won't be run.
>>>
>>>         P.
>>>
>>>
>>>         On 2011-02-07, at 9:27 AM, akp geek wrote:
>>>
>>>>         Hi All -
>>>>
>>>>         I am trying to install postgis 1.5.2 on solaris10. When I
>>>>         run the configure I get the following.
>>>>
>>>>         *configure: WARNING: could not locate CUnit required for
>>>>         liblwgeom unit tests*
>>>>
>>>>         is there some setting I need to do to make it work?
>>>>
>>>>
>>>>         $./configure --prefix=/opt/postgres/gis
>>>>         --with-geosconfig=/opt/postgres/gis/bin/geos-config
>>>>         --with-projdir=/opt/postgres/gis
>>>>         checking build system type... sparc-sun-solaris2.10
>>>>         checking host system type... sparc-sun-solaris2.10
>>>>         checking for gcc... gcc
>>>>         checking whether the C compiler works... ^C10.112.161.124$
>>>>         $./configure --prefix=/opt/postgres/gis
>>>>         --with-geosconfig=/opt/postgres/gis/bin/geos-config
>>>>         --with-projdir=/opt/postgres/gis
>>>>         checking build system type... sparc-sun-solaris2.10
>>>>         checking host system type... sparc-sun-solaris2.10
>>>>         checking for gcc... gcc
>>>>         checking whether the C compiler works... yes
>>>>         checking for C compiler default output file name... a.out
>>>>         checking for suffix of executables...
>>>>         checking whether we are cross compiling... no
>>>>         checking for suffix of object files... o
>>>>         checking whether we are using the GNU C compiler... yes
>>>>         checking whether gcc accepts -g... yes
>>>>         checking for gcc option to accept ISO C89... none needed
>>>>         checking for a sed that does not truncate output...
>>>>         /usr/5bin/sed
>>>>         checking for grep that handles long lines and -e...
>>>>         /usr/sfw/bin/ggrep
>>>>         checking for egrep... /usr/sfw/bin/ggrep -E
>>>>         checking for fgrep... /usr/sfw/bin/ggrep -F
>>>>         checking for ld used by gcc... /usr/ccs/bin/ld
>>>>         checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
>>>>         checking for BSD- or MS-compatible name lister (nm)...
>>>>         /usr/ccs/bin/nm -p
>>>>         checking the name lister (/usr/ccs/bin/nm -p) interface...
>>>>         BSD nm
>>>>         checking whether ln -s works... yes
>>>>         checking the maximum length of command line arguments... 786240
>>>>         checking whether the shell understands some XSI
>>>>         constructs... yes
>>>>         checking whether the shell understands "+="... no
>>>>         checking for /usr/ccs/bin/ld option to reload object files... -r
>>>>         checking for objdump... no
>>>>         checking how to recognize dependent libraries... pass_all
>>>>         checking for ar... ar
>>>>         checking for strip... strip
>>>>         checking for ranlib... ranlib
>>>>         checking command to parse /usr/ccs/bin/nm -p output from gcc
>>>>         object... ok
>>>>         checking how to run the C preprocessor... gcc -E
>>>>         checking for ANSI C header files... yes
>>>>         checking for sys/types.h... yes
>>>>         checking for sys/stat.h... yes
>>>>         checking for stdlib.h... yes
>>>>         checking for string.h... yes
>>>>         checking for memory.h... yes
>>>>         checking for strings.h... yes
>>>>         checking for inttypes.h... yes
>>>>         checking for stdint.h... yes
>>>>         checking for unistd.h... yes
>>>>         checking for dlfcn.h... yes
>>>>         checking for objdir... .libs
>>>>         checking if gcc supports -fno-rtti -fno-exceptions... no
>>>>         checking for gcc option to produce PIC... -fPIC -DPIC
>>>>         checking if gcc PIC flag -fPIC -DPIC works... yes
>>>>         checking if gcc static flag -static works... no
>>>>         checking if gcc supports -c -o file.o... yes
>>>>         checking if gcc supports -c -o file.o... (cached) yes
>>>>         checking whether the gcc linker (/usr/ccs/bin/ld) supports
>>>>         shared libraries... yes
>>>>         checking whether -lc should be explicitly linked in... yes
>>>>         checking dynamic linker characteristics... solaris2.10 ld.so
>>>>         checking how to hardcode library paths into programs...
>>>>         immediate
>>>>         checking whether stripping libraries is possible... no
>>>>         checking if libtool supports shared libraries... yes
>>>>         checking whether to build shared libraries... yes
>>>>         checking whether to build static libraries... yes
>>>>         checking for gcc... (cached) gcc
>>>>         checking whether we are using the GNU C compiler... (cached) yes
>>>>         checking whether gcc accepts -g... (cached) yes
>>>>         checking for gcc option to accept ISO C89... (cached) none
>>>>         needed
>>>>         checking how to run the C preprocessor... gcc -E
>>>>         checking for g++... g++
>>>>         checking whether we are using the GNU C++ compiler... yes
>>>>         checking whether g++ accepts -g... yes
>>>>         checking whether we are using the GNU C++ compiler...
>>>>         (cached) yes
>>>>         checking whether g++ accepts -g... (cached) yes
>>>>         checking how to run the C++ preprocessor... g++ -E
>>>>         checking for ld used by g++... /usr/ccs/bin/ld
>>>>         checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
>>>>         checking whether the g++ linker (/usr/ccs/bin/ld) supports
>>>>         shared libraries... yes
>>>>         checking for g++ option to produce PIC... -fPIC -DPIC
>>>>         checking if g++ PIC flag -fPIC -DPIC works... yes
>>>>         checking if g++ static flag -static works... no
>>>>         checking if g++ supports -c -o file.o... yes
>>>>         checking if g++ supports -c -o file.o... (cached) yes
>>>>         checking whether the g++ linker (/usr/ccs/bin/ld) supports
>>>>         shared libraries... yes
>>>>         checking dynamic linker characteristics... solaris2.10 ld.so
>>>>         checking how to hardcode library paths into programs...
>>>>         immediate
>>>>         checking if g++ supports -Wall... yes
>>>>         checking if g++ supports -Wmissing-prototypes... yes
>>>>         checking if g++ supports -ffloat-store... yes
>>>>         checking for flex... flex
>>>>         checking lex output file root... lex.yy
>>>>         checking lex library... -lfl
>>>>         checking whether yytext is a pointer... yes
>>>>         checking for bison... bison -y
>>>>         checking ieeefp.h usability... yes
>>>>         checking ieeefp.h presence... yes
>>>>         checking for ieeefp.h... yes
>>>>         checking for convert... /usr/sfw/bin/convert
>>>>         checking for xsltproc... /usr/5bin/xsltproc
>>>>         checking for dblatex... no
>>>>         configure: WARNING: dblatex is not installed so PDF
>>>>         documentation cannot be built
>>>>         checking CUnit/CUnit.h usability... no
>>>>         checking CUnit/CUnit.h presence... no
>>>>         checking for CUnit/CUnit.h... no
>>>>         configure: WARNING: could not locate CUnit required for
>>>>         liblwgeom unit tests
>>>>         checking iconv.h usability... yes
>>>>         checking iconv.h presence... yes
>>>>         checking for iconv.h... yes
>>>>         checking for libiconv_open in -liconv... yes
>>>>         checking for iconvctl... no
>>>>         checking for libiconvctl... no
>>>>         checking for pg_config... /opt/postgres/9.0.2/bin/pg_config
>>>>         checking PostgreSQL version... PostgreSQL 9.0.2
>>>>         checking libpq-fe.h usability... yes
>>>>         checking libpq-fe.h presence... yes
>>>>         checking for libpq-fe.h... yes
>>>>         checking for PQserverVersion in -lpq... yes
>>>>         checking for xml2-config... /usr/5bin/xml2-config
>>>>         checking libxml/tree.h usability... yes
>>>>         checking libxml/tree.h presence... yes
>>>>         checking for libxml/tree.h... yes
>>>>         checking libxml/parser.h usability... yes
>>>>         checking libxml/parser.h presence... yes
>>>>         checking for libxml/parser.h... yes
>>>>         checking libxml/xpath.h usability... yes
>>>>         checking libxml/xpath.h presence... yes
>>>>         checking for libxml/xpath.h... yes
>>>>         checking libxml/xpathInternals.h usability... yes
>>>>         checking libxml/xpathInternals.h presence... yes
>>>>         checking for libxml/xpathInternals.h... yes
>>>>         checking for xmlInitParser in -lxml2... yes
>>>>         Using user-specified geos-config file:
>>>>         /opt/postgres/gis/bin/geos-config
>>>>         checking GEOS version... 3.2.2
>>>>         checking geos_c.h usability... yes
>>>>         checking geos_c.h presence... yes
>>>>         checking for geos_c.h... yes
>>>>         checking for initGEOS in -lgeos_c... yes
>>>>         Using user-specified proj directory: /opt/postgres/gis
>>>>         checking proj_api.h usability... yes
>>>>         checking proj_api.h presence... yes
>>>>         checking for proj_api.h... yes
>>>>         checking for pj_get_release in -lproj... yes
>>>>         configure: creating ./config.status
>>>>         config.status: creating liblwgeom/Makefile
>>>>         config.status: creating liblwgeom/cunit/Makefile
>>>>         config.status: creating postgis/Makefile
>>>>         config.status: creating postgis/sqldefines.h
>>>>         config.status: creating loader/Makefile
>>>>         config.status: creating topology/Makefile
>>>>         config.status: creating regress/Makefile
>>>>         config.status: creating doc/Makefile
>>>>         config.status: creating doc/Makefile.comments
>>>>         config.status: creating doc/html/image_src/Makefile
>>>>         config.status: creating postgis_config.h
>>>>         config.status: executing libtool commands
>>>>
>>>>         PostGIS is now configured for sparc-sun-solaris2.10
>>>>
>>>>         -------------- Compiler Info -------------
>>>>         C compiler: gcc -g -O2
>>>>         C++ compiler: g++ -g -O2
>>>>
>>>>         -------------- Dependencies --------------
>>>>         GEOS config: /opt/postgres/gis/bin/geos-config
>>>>         GEOS version: 3.2.2
>>>>         PostgreSQL config: /opt/postgres/9.0.2/bin/pg_config
>>>>         PostgreSQL version: PostgreSQL 9.0.2
>>>>         PROJ4 version: 47
>>>>         Libxml2 config: /usr/5bin/xml2-config
>>>>         Libxml2 version: 2.6.23
>>>>         PostGIS debug level: 0
>>>>
>>>>         -------- Documentation Generation --------
>>>>         xsltproc: /usr/5bin/xsltproc
>>>>         xsl style sheets: /usr/share/sgml/docbook/xsl-stylesheets
>>>>         dblatex:
>>>>         convert: /usr/sfw/bin/convert
>>>>
>>>>         Regards
>>>>
>>>
>>>
>>
>>
>

On 2011-02-07, at 11:27 AM, Edoardo Panfili wrote:

> On 07/02/11 18.55, Paul Ramsey wrote:
>> Well, maybe you could in-place upgrade if you left your PostGIS version
>> at the original and only upgraded the PostgreSQL part, but you aren't
>> doing that, you're also upgrading your PostGIS version.
>>
>> pg_dump the database
>> create a new database on the new server, install postgis in it
>> pg_restore the database
> I am at the beginning with postigis. This is also my way to copy the data from one machine to another. I have the
sameserver in both the machines (postgresql 8.4 + postgis 1.5), no errors during this process. 
>
>> ignore the many errors
> this sentence scares me a bit (for my future)... what kind of errors?

"error messages" would be a better term. In the procedure above you are installing a database dump, which will
naturallyinclude the PostGIS function and type definitions into a database in which you have *already* installed the
PostGISfunction and type definitions. Naturally you get a lot of noise as the functions in the dump try to install and
hitthe existing types and functions. But it's sound and fury signifying nothing. 

P.

>
>
> Edoardo
>
>
>
>> On 2011-02-07, at 9:49 AM, akp geek wrote:
>>
>>>
>>> Please pardon my ignorance. The reason I am worried about it is, when
>>> I tried to use pg_upgrade to migrate from 8.3 to 9.0.2. I am getting
>>> an error
>>>
>>> Failed to load library: $libdir/liblwgeom
>>> ERROR: could not access file "$libdir/liblwgeom": No such file or
>>> directory
>>>
>>> I am using pg_upgrade for upgrading
>>>
>>>
>>> Regards
>>>
>>> On Mon, Feb 7, 2011 at 12:39 PM, Paul Ramsey
>>> <pramsey@cleverelephant.ca <mailto:pramsey@cleverelephant.ca>> wrote:
>>>
>>>    It's not a dynlib, it's statically linked at build time, so have
>>>    no fear. Stop thinking so much :)
>>>    P
>>>
>>>    On 2011-02-07, at 9:38 AM, akp geek wrote:
>>>
>>>>    installation was successful. But it did not install the liblwgeom.so
>>>>
>>>>    Regards
>>>>
>>>>    On Mon, Feb 7, 2011 at 12:29 PM, Paul Ramsey
>>>>    <pramsey@cleverelephant.ca <mailto:pramsey@cleverelephant.ca>> wrote:
>>>>
>>>>        It's just a warning, continue happily onwards. Just means a
>>>>        few unit tests won't be run.
>>>>
>>>>        P.
>>>>
>>>>
>>>>        On 2011-02-07, at 9:27 AM, akp geek wrote:
>>>>
>>>>>        Hi All -
>>>>>
>>>>>        I am trying to install postgis 1.5.2 on solaris10. When I
>>>>>        run the configure I get the following.
>>>>>
>>>>>        *configure: WARNING: could not locate CUnit required for
>>>>>        liblwgeom unit tests*
>>>>>
>>>>>        is there some setting I need to do to make it work?
>>>>>
>>>>>
>>>>>        $./configure --prefix=/opt/postgres/gis
>>>>>        --with-geosconfig=/opt/postgres/gis/bin/geos-config
>>>>>        --with-projdir=/opt/postgres/gis
>>>>>        checking build system type... sparc-sun-solaris2.10
>>>>>        checking host system type... sparc-sun-solaris2.10
>>>>>        checking for gcc... gcc
>>>>>        checking whether the C compiler works... ^C10.112.161.124$
>>>>>        $./configure --prefix=/opt/postgres/gis
>>>>>        --with-geosconfig=/opt/postgres/gis/bin/geos-config
>>>>>        --with-projdir=/opt/postgres/gis
>>>>>        checking build system type... sparc-sun-solaris2.10
>>>>>        checking host system type... sparc-sun-solaris2.10
>>>>>        checking for gcc... gcc
>>>>>        checking whether the C compiler works... yes
>>>>>        checking for C compiler default output file name... a.out
>>>>>        checking for suffix of executables...
>>>>>        checking whether we are cross compiling... no
>>>>>        checking for suffix of object files... o
>>>>>        checking whether we are using the GNU C compiler... yes
>>>>>        checking whether gcc accepts -g... yes
>>>>>        checking for gcc option to accept ISO C89... none needed
>>>>>        checking for a sed that does not truncate output...
>>>>>        /usr/5bin/sed
>>>>>        checking for grep that handles long lines and -e...
>>>>>        /usr/sfw/bin/ggrep
>>>>>        checking for egrep... /usr/sfw/bin/ggrep -E
>>>>>        checking for fgrep... /usr/sfw/bin/ggrep -F
>>>>>        checking for ld used by gcc... /usr/ccs/bin/ld
>>>>>        checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
>>>>>        checking for BSD- or MS-compatible name lister (nm)...
>>>>>        /usr/ccs/bin/nm -p
>>>>>        checking the name lister (/usr/ccs/bin/nm -p) interface...
>>>>>        BSD nm
>>>>>        checking whether ln -s works... yes
>>>>>        checking the maximum length of command line arguments... 786240
>>>>>        checking whether the shell understands some XSI
>>>>>        constructs... yes
>>>>>        checking whether the shell understands "+="... no
>>>>>        checking for /usr/ccs/bin/ld option to reload object files... -r
>>>>>        checking for objdump... no
>>>>>        checking how to recognize dependent libraries... pass_all
>>>>>        checking for ar... ar
>>>>>        checking for strip... strip
>>>>>        checking for ranlib... ranlib
>>>>>        checking command to parse /usr/ccs/bin/nm -p output from gcc
>>>>>        object... ok
>>>>>        checking how to run the C preprocessor... gcc -E
>>>>>        checking for ANSI C header files... yes
>>>>>        checking for sys/types.h... yes
>>>>>        checking for sys/stat.h... yes
>>>>>        checking for stdlib.h... yes
>>>>>        checking for string.h... yes
>>>>>        checking for memory.h... yes
>>>>>        checking for strings.h... yes
>>>>>        checking for inttypes.h... yes
>>>>>        checking for stdint.h... yes
>>>>>        checking for unistd.h... yes
>>>>>        checking for dlfcn.h... yes
>>>>>        checking for objdir... .libs
>>>>>        checking if gcc supports -fno-rtti -fno-exceptions... no
>>>>>        checking for gcc option to produce PIC... -fPIC -DPIC
>>>>>        checking if gcc PIC flag -fPIC -DPIC works... yes
>>>>>        checking if gcc static flag -static works... no
>>>>>        checking if gcc supports -c -o file.o... yes
>>>>>        checking if gcc supports -c -o file.o... (cached) yes
>>>>>        checking whether the gcc linker (/usr/ccs/bin/ld) supports
>>>>>        shared libraries... yes
>>>>>        checking whether -lc should be explicitly linked in... yes
>>>>>        checking dynamic linker characteristics... solaris2.10 ld.so
>>>>>        checking how to hardcode library paths into programs...
>>>>>        immediate
>>>>>        checking whether stripping libraries is possible... no
>>>>>        checking if libtool supports shared libraries... yes
>>>>>        checking whether to build shared libraries... yes
>>>>>        checking whether to build static libraries... yes
>>>>>        checking for gcc... (cached) gcc
>>>>>        checking whether we are using the GNU C compiler... (cached) yes
>>>>>        checking whether gcc accepts -g... (cached) yes
>>>>>        checking for gcc option to accept ISO C89... (cached) none
>>>>>        needed
>>>>>        checking how to run the C preprocessor... gcc -E
>>>>>        checking for g++... g++
>>>>>        checking whether we are using the GNU C++ compiler... yes
>>>>>        checking whether g++ accepts -g... yes
>>>>>        checking whether we are using the GNU C++ compiler...
>>>>>        (cached) yes
>>>>>        checking whether g++ accepts -g... (cached) yes
>>>>>        checking how to run the C++ preprocessor... g++ -E
>>>>>        checking for ld used by g++... /usr/ccs/bin/ld
>>>>>        checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
>>>>>        checking whether the g++ linker (/usr/ccs/bin/ld) supports
>>>>>        shared libraries... yes
>>>>>        checking for g++ option to produce PIC... -fPIC -DPIC
>>>>>        checking if g++ PIC flag -fPIC -DPIC works... yes
>>>>>        checking if g++ static flag -static works... no
>>>>>        checking if g++ supports -c -o file.o... yes
>>>>>        checking if g++ supports -c -o file.o... (cached) yes
>>>>>        checking whether the g++ linker (/usr/ccs/bin/ld) supports
>>>>>        shared libraries... yes
>>>>>        checking dynamic linker characteristics... solaris2.10 ld.so
>>>>>        checking how to hardcode library paths into programs...
>>>>>        immediate
>>>>>        checking if g++ supports -Wall... yes
>>>>>        checking if g++ supports -Wmissing-prototypes... yes
>>>>>        checking if g++ supports -ffloat-store... yes
>>>>>        checking for flex... flex
>>>>>        checking lex output file root... lex.yy
>>>>>        checking lex library... -lfl
>>>>>        checking whether yytext is a pointer... yes
>>>>>        checking for bison... bison -y
>>>>>        checking ieeefp.h usability... yes
>>>>>        checking ieeefp.h presence... yes
>>>>>        checking for ieeefp.h... yes
>>>>>        checking for convert... /usr/sfw/bin/convert
>>>>>        checking for xsltproc... /usr/5bin/xsltproc
>>>>>        checking for dblatex... no
>>>>>        configure: WARNING: dblatex is not installed so PDF
>>>>>        documentation cannot be built
>>>>>        checking CUnit/CUnit.h usability... no
>>>>>        checking CUnit/CUnit.h presence... no
>>>>>        checking for CUnit/CUnit.h... no
>>>>>        configure: WARNING: could not locate CUnit required for
>>>>>        liblwgeom unit tests
>>>>>        checking iconv.h usability... yes
>>>>>        checking iconv.h presence... yes
>>>>>        checking for iconv.h... yes
>>>>>        checking for libiconv_open in -liconv... yes
>>>>>        checking for iconvctl... no
>>>>>        checking for libiconvctl... no
>>>>>        checking for pg_config... /opt/postgres/9.0.2/bin/pg_config
>>>>>        checking PostgreSQL version... PostgreSQL 9.0.2
>>>>>        checking libpq-fe.h usability... yes
>>>>>        checking libpq-fe.h presence... yes
>>>>>        checking for libpq-fe.h... yes
>>>>>        checking for PQserverVersion in -lpq... yes
>>>>>        checking for xml2-config... /usr/5bin/xml2-config
>>>>>        checking libxml/tree.h usability... yes
>>>>>        checking libxml/tree.h presence... yes
>>>>>        checking for libxml/tree.h... yes
>>>>>        checking libxml/parser.h usability... yes
>>>>>        checking libxml/parser.h presence... yes
>>>>>        checking for libxml/parser.h... yes
>>>>>        checking libxml/xpath.h usability... yes
>>>>>        checking libxml/xpath.h presence... yes
>>>>>        checking for libxml/xpath.h... yes
>>>>>        checking libxml/xpathInternals.h usability... yes
>>>>>        checking libxml/xpathInternals.h presence... yes
>>>>>        checking for libxml/xpathInternals.h... yes
>>>>>        checking for xmlInitParser in -lxml2... yes
>>>>>        Using user-specified geos-config file:
>>>>>        /opt/postgres/gis/bin/geos-config
>>>>>        checking GEOS version... 3.2.2
>>>>>        checking geos_c.h usability... yes
>>>>>        checking geos_c.h presence... yes
>>>>>        checking for geos_c.h... yes
>>>>>        checking for initGEOS in -lgeos_c... yes
>>>>>        Using user-specified proj directory: /opt/postgres/gis
>>>>>        checking proj_api.h usability... yes
>>>>>        checking proj_api.h presence... yes
>>>>>        checking for proj_api.h... yes
>>>>>        checking for pj_get_release in -lproj... yes
>>>>>        configure: creating ./config.status
>>>>>        config.status: creating liblwgeom/Makefile
>>>>>        config.status: creating liblwgeom/cunit/Makefile
>>>>>        config.status: creating postgis/Makefile
>>>>>        config.status: creating postgis/sqldefines.h
>>>>>        config.status: creating loader/Makefile
>>>>>        config.status: creating topology/Makefile
>>>>>        config.status: creating regress/Makefile
>>>>>        config.status: creating doc/Makefile
>>>>>        config.status: creating doc/Makefile.comments
>>>>>        config.status: creating doc/html/image_src/Makefile
>>>>>        config.status: creating postgis_config.h
>>>>>        config.status: executing libtool commands
>>>>>
>>>>>        PostGIS is now configured for sparc-sun-solaris2.10
>>>>>
>>>>>        -------------- Compiler Info -------------
>>>>>        C compiler: gcc -g -O2
>>>>>        C++ compiler: g++ -g -O2
>>>>>
>>>>>        -------------- Dependencies --------------
>>>>>        GEOS config: /opt/postgres/gis/bin/geos-config
>>>>>        GEOS version: 3.2.2
>>>>>        PostgreSQL config: /opt/postgres/9.0.2/bin/pg_config
>>>>>        PostgreSQL version: PostgreSQL 9.0.2
>>>>>        PROJ4 version: 47
>>>>>        Libxml2 config: /usr/5bin/xml2-config
>>>>>        Libxml2 version: 2.6.23
>>>>>        PostGIS debug level: 0
>>>>>
>>>>>        -------- Documentation Generation --------
>>>>>        xsltproc: /usr/5bin/xsltproc
>>>>>        xsl style sheets: /usr/share/sgml/docbook/xsl-stylesheets
>>>>>        dblatex:
>>>>>        convert: /usr/sfw/bin/convert
>>>>>
>>>>>        Regards
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
> --
> Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-general