Thread: --with-tcl
Hi! I am having trouble compiling postgres with tcl on OpenBSD. I have both 8.0 and 8.3, and I have tried compiling with both of them. I also tried w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with no success. Compiling without tcl is no problem. configuring works fine, but it fails at compile time. Here are my configure commands: ./configure --with-perl --with-tcl --with- tclconfig=/usr/local/lib/tcl8.3/ --without-tk ./configure --with-perl --with-tcl --with- tclconfig=/usr/local/lib/tcl8.3/ --with-tkconfig=/usr/local/lib/tk8.3/ ./configure --with-perl --with-tcl --with-tclconfig=/usr/local/lib/tk8.0/ - -with-tclconfig=/usr/local/lib/tk8.0/ ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ ./configure --with-tcl --without-tk Below is compilation error, it is, I believe, identical on all configurations. All help will be greatly appreciated! Regards, Aasmund. gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -fpic - DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o pgtcl.o pgtcl.c In file included from pgtcl.c:19: libpgtcl.h:19: tcl.h: No such file or directory In file included from pgtcl.c:20: pgtclCmds.h:17: tcl.h: No such file or directory In file included from pgtcl.c:19: libpgtcl.h:21: syntax error before `*' libpgtcl.h:22: syntax error before `*' In file included from pgtcl.c:20: pgtclCmds.h:47: syntax error before `Tcl_Interp' pgtclCmds.h:90: syntax error before `cData' pgtclCmds.h:92: syntax error before `cData' pgtclCmds.h:94: syntax error before `cData' pgtclCmds.h:96: syntax error before `cData' pgtclCmds.h:98: syntax error before `cData' pgtclCmds.h:100: syntax error before `cData' pgtclCmds.h:102: syntax error before `cData' pgtclCmds.h:104: syntax error before `cData' pgtclCmds.h:106: syntax error before `cData' pgtclCmds.h:118: syntax error before `cData' pgtclCmds.h:120: syntax error before `cData' pgtclCmds.h:123: syntax error before `cData' pgtclCmds.h:125: syntax error before `cData' pgtclCmds.h:127: syntax error before `cData' pgtclCmds.h:129: syntax error before `cData' pgtclCmds.h:131: syntax error before `cData' pgtclCmds.h:133: syntax error before `cData' pgtclCmds.h:135: syntax error before `cData' pgtclCmds.h:137: syntax error before `cData' In file included from pgtcl.c:21: pgtclId.h:18: syntax error before `*' pgtclId.h:37: syntax error before `*' pgtclId.h:39: syntax error before `cData' pgtclId.h:40: syntax error before `cData' pgtclId.h:41: syntax error before `cData' pgtclId.h:42: syntax error before `*' pgtclId.h:43: syntax error before `*' pgtclId.h:44: syntax error before `*' pgtclId.h:45: syntax error before `*' pgtclId.h:50: syntax error before `clientData' pgtclId.h:63: syntax error before `Pg_ConnType' pgtclId.h:63: warning: type defaults to `int' in declaration of `Pg_ConnType' pgtclId.h:63: warning: data definition has no type or storage class pgtcl.c:30: syntax error before `*' pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' pgtcl.c: In function `Pgtcl_Init': pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' pgtcl.c:48: `interp' undeclared (first use in this function) pgtcl.c:48: (Each undeclared identifier is reported only once pgtcl.c:48: for each function it appears in.) pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) pgtcl.c:53: warning: implicit declaration of function `Tcl_CreateCommand' pgtcl.c:56: `ClientData' undeclared (first use in this function) pgtcl.c:56: syntax error before `0' pgtcl.c:61: syntax error before `0' pgtcl.c:66: syntax error before `0' pgtcl.c:71: syntax error before `0' pgtcl.c:76: syntax error before `0' pgtcl.c:81: syntax error before `0' pgtcl.c:86: syntax error before `0' pgtcl.c:91: syntax error before `0' pgtcl.c:96: syntax error before `0' pgtcl.c:112: syntax error before `0' pgtcl.c:117: syntax error before `0' pgtcl.c:123: syntax error before `0' pgtcl.c:128: syntax error before `0' pgtcl.c:133: syntax error before `0' pgtcl.c:138: syntax error before `0' pgtcl.c:143: syntax error before `0' pgtcl.c:148: syntax error before `0' pgtcl.c:153: syntax error before `0' pgtcl.c:158: syntax error before `0' pgtcl.c:160: warning: implicit declaration of function `Tcl_PkgProvide' pgtcl.c:162: `TCL_OK' undeclared (first use in this function) pgtcl.c:163: warning: control reaches end of non-void function pgtcl.c: At top level: pgtcl.c:167: syntax error before `*' pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' pgtcl.c: In function `Pgtcl_SafeInit': pgtcl.c:169: `interp' undeclared (first use in this function) gmake[3]: *** [pgtcl.o] Error 1 Aasmund Midttun Godal aasmund@godal.com - http://www.godal.com/ +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
Oh, and it's 7.3, obviously, sorry. Regards, Aasmund. * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > Hi! > > I am having trouble compiling postgres with tcl on OpenBSD. I have both > 8.0 and 8.3, and I have tried compiling with both of them. I also tried > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with no > success. Compiling without tcl is no problem. configuring works fine, but > it fails at compile time. Here are my configure commands: > > ./configure --with-perl --with-tcl --with- > tclconfig=/usr/local/lib/tcl8.3/ --without-tk > > ./configure --with-perl --with-tcl --with- > tclconfig=/usr/local/lib/tcl8.3/ --with-tkconfig=/usr/local/lib/tk8.3/ > > ./configure --with-perl --with-tcl --with- tclconfig=/usr/local/lib/tk8.0/ - > -with-tclconfig=/usr/local/lib/tk8.0/ > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ > > ./configure --with-tcl --without-tk > > > Below is compilation error, it is, I believe, identical on all > configurations. > > All help will be greatly appreciated! > > Regards, > > Aasmund. > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -fpic - > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o > pgtcl.o pgtcl.c > In file included from pgtcl.c:19: > libpgtcl.h:19: tcl.h: No such file or directory > In file included from pgtcl.c:20: > pgtclCmds.h:17: tcl.h: No such file or directory > In file included from pgtcl.c:19: > libpgtcl.h:21: syntax error before `*' > libpgtcl.h:22: syntax error before `*' > In file included from pgtcl.c:20: > pgtclCmds.h:47: syntax error before `Tcl_Interp' > pgtclCmds.h:90: syntax error before `cData' > pgtclCmds.h:92: syntax error before `cData' > pgtclCmds.h:94: syntax error before `cData' > pgtclCmds.h:96: syntax error before `cData' > pgtclCmds.h:98: syntax error before `cData' > pgtclCmds.h:100: syntax error before `cData' > pgtclCmds.h:102: syntax error before `cData' > pgtclCmds.h:104: syntax error before `cData' > pgtclCmds.h:106: syntax error before `cData' > pgtclCmds.h:118: syntax error before `cData' > pgtclCmds.h:120: syntax error before `cData' > pgtclCmds.h:123: syntax error before `cData' > pgtclCmds.h:125: syntax error before `cData' > pgtclCmds.h:127: syntax error before `cData' > pgtclCmds.h:129: syntax error before `cData' > pgtclCmds.h:131: syntax error before `cData' > pgtclCmds.h:133: syntax error before `cData' > pgtclCmds.h:135: syntax error before `cData' > pgtclCmds.h:137: syntax error before `cData' > In file included from pgtcl.c:21: > pgtclId.h:18: syntax error before `*' > pgtclId.h:37: syntax error before `*' > pgtclId.h:39: syntax error before `cData' > pgtclId.h:40: syntax error before `cData' > pgtclId.h:41: syntax error before `cData' > pgtclId.h:42: syntax error before `*' > pgtclId.h:43: syntax error before `*' > pgtclId.h:44: syntax error before `*' > pgtclId.h:45: syntax error before `*' > pgtclId.h:50: syntax error before `clientData' > pgtclId.h:63: syntax error before `Pg_ConnType' > pgtclId.h:63: warning: type defaults to `int' in declaration of > `Pg_ConnType' > pgtclId.h:63: warning: data definition has no type or storage class > pgtcl.c:30: syntax error before `*' > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' > pgtcl.c: In function `Pgtcl_Init': > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' > pgtcl.c:48: `interp' undeclared (first use in this function) > pgtcl.c:48: (Each undeclared identifier is reported only once > pgtcl.c:48: for each function it appears in.) > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) > pgtcl.c:53: warning: implicit declaration of function `Tcl_CreateCommand' > pgtcl.c:56: `ClientData' undeclared (first use in this function) > pgtcl.c:56: syntax error before `0' > pgtcl.c:61: syntax error before `0' > pgtcl.c:66: syntax error before `0' > pgtcl.c:71: syntax error before `0' > pgtcl.c:76: syntax error before `0' > pgtcl.c:81: syntax error before `0' > pgtcl.c:86: syntax error before `0' > pgtcl.c:91: syntax error before `0' > pgtcl.c:96: syntax error before `0' > pgtcl.c:112: syntax error before `0' > pgtcl.c:117: syntax error before `0' > pgtcl.c:123: syntax error before `0' > pgtcl.c:128: syntax error before `0' > pgtcl.c:133: syntax error before `0' > pgtcl.c:138: syntax error before `0' > pgtcl.c:143: syntax error before `0' > pgtcl.c:148: syntax error before `0' > pgtcl.c:153: syntax error before `0' > pgtcl.c:158: syntax error before `0' > pgtcl.c:160: warning: implicit declaration of function `Tcl_PkgProvide' > pgtcl.c:162: `TCL_OK' undeclared (first use in this function) > pgtcl.c:163: warning: control reaches end of non-void function > pgtcl.c: At top level: > pgtcl.c:167: syntax error before `*' > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' > pgtcl.c: In function `Pgtcl_SafeInit': > pgtcl.c:169: `interp' undeclared (first use in this function) > gmake[3]: *** [pgtcl.o] Error 1 > > Aasmund Midttun Godal > > aasmund@godal.com - http://www.godal.com/ > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > ---------------------------(end of broadcast)--------------------------- > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > Aasmund Midttun Godal aasmund@godal.com - http://www.godal.com/ +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
Hi, tcl.h is missing. You have to install the developmentfiles of tcl. Normally you can find it in tc-devel if you have linux. Configure should have complained about it. Tommi Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal: > Oh, and it's 7.3, obviously, sorry. > > Regards, > > Aasmund. > > * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > > Hi! > > > > I am having trouble compiling postgres with tcl on OpenBSD. I have both > > 8.0 and 8.3, and I have tried compiling with both of them. I also tried > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with no > > success. Compiling without tcl is no problem. configuring works fine, > > but > > > it fails at compile time. Here are my configure commands: > > > > ./configure --with-perl --with-tcl --with- > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk > > > > ./configure --with-perl --with-tcl --with- > > tclconfig=/usr/local/lib/tcl8.3/ --with-tkconfig=/usr/local/lib/tk8.3/ > > > > ./configure --with-perl --with-tcl --with- > > tclconfig=/usr/local/lib/tk8.0/ - > > > -with-tclconfig=/usr/local/lib/tk8.0/ > > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ > > > > ./configure --with-tcl --without-tk > > > > > > Below is compilation error, it is, I believe, identical on all > > configurations. > > > > All help will be greatly appreciated! > > > > Regards, > > > > Aasmund. > > > > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -fpic - > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o > > pgtcl.o pgtcl.c > > In file included from pgtcl.c:19: > > libpgtcl.h:19: tcl.h: No such file or directory > > In file included from pgtcl.c:20: > > pgtclCmds.h:17: tcl.h: No such file or directory > > In file included from pgtcl.c:19: > > libpgtcl.h:21: syntax error before `*' > > libpgtcl.h:22: syntax error before `*' > > In file included from pgtcl.c:20: > > pgtclCmds.h:47: syntax error before `Tcl_Interp' > > pgtclCmds.h:90: syntax error before `cData' > > pgtclCmds.h:92: syntax error before `cData' > > pgtclCmds.h:94: syntax error before `cData' > > pgtclCmds.h:96: syntax error before `cData' > > pgtclCmds.h:98: syntax error before `cData' > > pgtclCmds.h:100: syntax error before `cData' > > pgtclCmds.h:102: syntax error before `cData' > > pgtclCmds.h:104: syntax error before `cData' > > pgtclCmds.h:106: syntax error before `cData' > > pgtclCmds.h:118: syntax error before `cData' > > pgtclCmds.h:120: syntax error before `cData' > > pgtclCmds.h:123: syntax error before `cData' > > pgtclCmds.h:125: syntax error before `cData' > > pgtclCmds.h:127: syntax error before `cData' > > pgtclCmds.h:129: syntax error before `cData' > > pgtclCmds.h:131: syntax error before `cData' > > pgtclCmds.h:133: syntax error before `cData' > > pgtclCmds.h:135: syntax error before `cData' > > pgtclCmds.h:137: syntax error before `cData' > > In file included from pgtcl.c:21: > > pgtclId.h:18: syntax error before `*' > > pgtclId.h:37: syntax error before `*' > > pgtclId.h:39: syntax error before `cData' > > pgtclId.h:40: syntax error before `cData' > > pgtclId.h:41: syntax error before `cData' > > pgtclId.h:42: syntax error before `*' > > pgtclId.h:43: syntax error before `*' > > pgtclId.h:44: syntax error before `*' > > pgtclId.h:45: syntax error before `*' > > pgtclId.h:50: syntax error before `clientData' > > pgtclId.h:63: syntax error before `Pg_ConnType' > > pgtclId.h:63: warning: type defaults to `int' in declaration of > > `Pg_ConnType' > > pgtclId.h:63: warning: data definition has no type or storage class > > pgtcl.c:30: syntax error before `*' > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' > > pgtcl.c: In function `Pgtcl_Init': > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' > > pgtcl.c:48: `interp' undeclared (first use in this function) > > pgtcl.c:48: (Each undeclared identifier is reported only once > > pgtcl.c:48: for each function it appears in.) > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) > > pgtcl.c:53: warning: implicit declaration of function `Tcl_CreateCommand' > > pgtcl.c:56: `ClientData' undeclared (first use in this function) > > pgtcl.c:56: syntax error before `0' > > pgtcl.c:61: syntax error before `0' > > pgtcl.c:66: syntax error before `0' > > pgtcl.c:71: syntax error before `0' > > pgtcl.c:76: syntax error before `0' > > pgtcl.c:81: syntax error before `0' > > pgtcl.c:86: syntax error before `0' > > pgtcl.c:91: syntax error before `0' > > pgtcl.c:96: syntax error before `0' > > pgtcl.c:112: syntax error before `0' > > pgtcl.c:117: syntax error before `0' > > pgtcl.c:123: syntax error before `0' > > pgtcl.c:128: syntax error before `0' > > pgtcl.c:133: syntax error before `0' > > pgtcl.c:138: syntax error before `0' > > pgtcl.c:143: syntax error before `0' > > pgtcl.c:148: syntax error before `0' > > pgtcl.c:153: syntax error before `0' > > pgtcl.c:158: syntax error before `0' > > pgtcl.c:160: warning: implicit declaration of function `Tcl_PkgProvide' > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function) > > pgtcl.c:163: warning: control reaches end of non-void function > > pgtcl.c: At top level: > > pgtcl.c:167: syntax error before `*' > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' > > pgtcl.c: In function `Pgtcl_SafeInit': > > pgtcl.c:169: `interp' undeclared (first use in this function) > > gmake[3]: *** [pgtcl.o] Error 1 > > > > Aasmund Midttun Godal > > > > aasmund@godal.com - http://www.godal.com/ > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > ---------------------------(end of broadcast)--------------------------- > > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > > Aasmund Midttun Godal > > aasmund@godal.com - http://www.godal.com/ > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > ---------------------------(end of broadcast)--------------------------- > TIP 4: Don't 'kill -9' the postmaster -- Dr. Eckhardt + Partner GmbH http://www.epgmbh.de
Thank you for responding, However, I hva all the tcl files installed, including tcl.h, and it worked with Pg 7.2 Regards, Aasmund. * Tommi Maekitalo <t.maekitalo@epgmbh.de> wrote: > Hi, > > tcl.h is missing. You have to install the developmentfiles of tcl. Normally > you can find it in tc-devel if you have linux. Configure should have > complained about it. > > > Tommi > > > Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal: > > Oh, and it's 7.3, obviously, sorry. > > > > Regards, > > > > Aasmund. > > > > * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > > > Hi! > > > > > > I am having trouble compiling postgres with tcl on OpenBSD. I have both > > > 8.0 and 8.3, and I have tried compiling with both of them. I also tried > > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with no > > > success. Compiling without tcl is no problem. configuring works fine, > > > > but > > > > > it fails at compile time. Here are my configure commands: > > > > > > ./configure --with-perl --with-tcl --with- > > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk > > > > > > ./configure --with-perl --with-tcl --with- > > > tclconfig=/usr/local/lib/tcl8.3/ --with- tkconfig=/usr/local/lib/tk8.3/ > > > > > > ./configure --with-perl --with-tcl --with- > > > > tclconfig=/usr/local/lib/tk8.0/ - > > > > > -with-tclconfig=/usr/local/lib/tk8.0/ > > > > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ > > > > > > ./configure --with-tcl --without-tk > > > > > > > > > Below is compilation error, it is, I believe, identical on all > > > configurations. > > > > > > All help will be greatly appreciated! > > > > > > Regards, > > > > > > Aasmund. > > > > > > > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations - fpic - > > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o > > > pgtcl.o pgtcl.c > > > In file included from pgtcl.c:19: > > > libpgtcl.h:19: tcl.h: No such file or directory > > > In file included from pgtcl.c:20: > > > pgtclCmds.h:17: tcl.h: No such file or directory > > > In file included from pgtcl.c:19: > > > libpgtcl.h:21: syntax error before `*' > > > libpgtcl.h:22: syntax error before `*' > > > In file included from pgtcl.c:20: > > > pgtclCmds.h:47: syntax error before `Tcl_Interp' > > > pgtclCmds.h:90: syntax error before `cData' > > > pgtclCmds.h:92: syntax error before `cData' > > > pgtclCmds.h:94: syntax error before `cData' > > > pgtclCmds.h:96: syntax error before `cData' > > > pgtclCmds.h:98: syntax error before `cData' > > > pgtclCmds.h:100: syntax error before `cData' > > > pgtclCmds.h:102: syntax error before `cData' > > > pgtclCmds.h:104: syntax error before `cData' > > > pgtclCmds.h:106: syntax error before `cData' > > > pgtclCmds.h:118: syntax error before `cData' > > > pgtclCmds.h:120: syntax error before `cData' > > > pgtclCmds.h:123: syntax error before `cData' > > > pgtclCmds.h:125: syntax error before `cData' > > > pgtclCmds.h:127: syntax error before `cData' > > > pgtclCmds.h:129: syntax error before `cData' > > > pgtclCmds.h:131: syntax error before `cData' > > > pgtclCmds.h:133: syntax error before `cData' > > > pgtclCmds.h:135: syntax error before `cData' > > > pgtclCmds.h:137: syntax error before `cData' > > > In file included from pgtcl.c:21: > > > pgtclId.h:18: syntax error before `*' > > > pgtclId.h:37: syntax error before `*' > > > pgtclId.h:39: syntax error before `cData' > > > pgtclId.h:40: syntax error before `cData' > > > pgtclId.h:41: syntax error before `cData' > > > pgtclId.h:42: syntax error before `*' > > > pgtclId.h:43: syntax error before `*' > > > pgtclId.h:44: syntax error before `*' > > > pgtclId.h:45: syntax error before `*' > > > pgtclId.h:50: syntax error before `clientData' > > > pgtclId.h:63: syntax error before `Pg_ConnType' > > > pgtclId.h:63: warning: type defaults to `int' in declaration of > > > `Pg_ConnType' > > > pgtclId.h:63: warning: data definition has no type or storage class > > > pgtcl.c:30: syntax error before `*' > > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' > > > pgtcl.c: In function `Pgtcl_Init': > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' > > > pgtcl.c:48: `interp' undeclared (first use in this function) > > > pgtcl.c:48: (Each undeclared identifier is reported only once > > > pgtcl.c:48: for each function it appears in.) > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' > > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) > > > pgtcl.c:53: warning: implicit declaration of function `Tcl_CreateCommand' > > > pgtcl.c:56: `ClientData' undeclared (first use in this function) > > > pgtcl.c:56: syntax error before `0' > > > pgtcl.c:61: syntax error before `0' > > > pgtcl.c:66: syntax error before `0' > > > pgtcl.c:71: syntax error before `0' > > > pgtcl.c:76: syntax error before `0' > > > pgtcl.c:81: syntax error before `0' > > > pgtcl.c:86: syntax error before `0' > > > pgtcl.c:91: syntax error before `0' > > > pgtcl.c:96: syntax error before `0' > > > pgtcl.c:112: syntax error before `0' > > > pgtcl.c:117: syntax error before `0' > > > pgtcl.c:123: syntax error before `0' > > > pgtcl.c:128: syntax error before `0' > > > pgtcl.c:133: syntax error before `0' > > > pgtcl.c:138: syntax error before `0' > > > pgtcl.c:143: syntax error before `0' > > > pgtcl.c:148: syntax error before `0' > > > pgtcl.c:153: syntax error before `0' > > > pgtcl.c:158: syntax error before `0' > > > pgtcl.c:160: warning: implicit declaration of function `Tcl_PkgProvide' > > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function) > > > pgtcl.c:163: warning: control reaches end of non-void function > > > pgtcl.c: At top level: > > > pgtcl.c:167: syntax error before `*' > > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' > > > pgtcl.c: In function `Pgtcl_SafeInit': > > > pgtcl.c:169: `interp' undeclared (first use in this function) > > > gmake[3]: *** [pgtcl.o] Error 1 > > > > > > Aasmund Midttun Godal > > > > > > aasmund@godal.com - http://www.godal.com/ > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > ---------------------------(end of broadcast)------------------------ --- > > > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > > > > Aasmund Midttun Godal > > > > aasmund@godal.com - http://www.godal.com/ > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > ---------------------------(end of broadcast)-------------------------- - > > TIP 4: Don't 'kill -9' the postmaster > > -- > Dr. Eckhardt + Partner GmbH > http://www.epgmbh.de > > ---------------------------(end of broadcast)--------------------------- > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > Aasmund Midttun Godal aasmund@godal.com - http://www.godal.com/ +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
Are you sure that the tclConfig.sh file is located in
/usr/local/lib/tcl8.3/ ?
By default, Tcl would install with PREFIX=/usr/local and then the
tclConfig.sh file will be installed in /usr/local/lib
Check to make sure that the tclConfig.sh file is where you specified it,
and make sure it is valid...
--brett
On Mon, 2002-12-02 at 15:50, Aasmund Midttun Godal wrote:
> Thank you for responding,
>
> However, I hva all the tcl files installed, including tcl.h, and it worked
> with Pg 7.2
>
> Regards,
>
> Aasmund.
>
> * Tommi Maekitalo <t.maekitalo@epgmbh.de> wrote:
> > Hi,
> >
> > tcl.h is missing. You have to install the developmentfiles of tcl.
> Normally
> > you can find it in tc-devel if you have linux. Configure should have
> > complained about it.
> >
> >
> > Tommi
> >
> >
> > Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal:
> > > Oh, and it's 7.3, obviously, sorry.
> > >
> > > Regards,
> > >
> > > Aasmund.
> > >
> > > * Aasmund Midttun Godal <postgresql@aasmund.com> wrote:
> > > > Hi!
> > > >
> > > > I am having trouble compiling postgres with tcl on OpenBSD. I have
> both
> > > > 8.0 and 8.3, and I have tried compiling with both of them. I also
> tried
> > > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with
> no
> > > > success. Compiling without tcl is no problem. configuring works fine,
> > >
> > > but
> > >
> > > > it fails at compile time. Here are my configure commands:
> > > >
> > > > ./configure --with-perl --with-tcl --with-
> > > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk
> > > >
> > > > ./configure --with-perl --with-tcl --with-
> > > > tclconfig=/usr/local/lib/tcl8.3/ --with-
> tkconfig=/usr/local/lib/tk8.3/
> > > >
> > > > ./configure --with-perl --with-tcl --with-
> > >
> > > tclconfig=/usr/local/lib/tk8.0/ -
> > >
> > > > -with-tclconfig=/usr/local/lib/tk8.0/
> > > >
> > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/
> > > >
> > > > ./configure --with-tcl --without-tk
> > > >
> > > >
> > > > Below is compilation error, it is, I believe, identical on all
> > > > configurations.
> > > >
> > > > All help will be greatly appreciated!
> > > >
> > > > Regards,
> > > >
> > > > Aasmund.
> > > >
> > > >
> > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -
> fpic -
> > > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o
> > > > pgtcl.o pgtcl.c
> > > > In file included from pgtcl.c:19:
> > > > libpgtcl.h:19: tcl.h: No such file or directory
> > > > In file included from pgtcl.c:20:
> > > > pgtclCmds.h:17: tcl.h: No such file or directory
> > > > In file included from pgtcl.c:19:
> > > > libpgtcl.h:21: syntax error before `*'
> > > > libpgtcl.h:22: syntax error before `*'
> > > > In file included from pgtcl.c:20:
> > > > pgtclCmds.h:47: syntax error before `Tcl_Interp'
> > > > pgtclCmds.h:90: syntax error before `cData'
> > > > pgtclCmds.h:92: syntax error before `cData'
> > > > pgtclCmds.h:94: syntax error before `cData'
> > > > pgtclCmds.h:96: syntax error before `cData'
> > > > pgtclCmds.h:98: syntax error before `cData'
> > > > pgtclCmds.h:100: syntax error before `cData'
> > > > pgtclCmds.h:102: syntax error before `cData'
> > > > pgtclCmds.h:104: syntax error before `cData'
> > > > pgtclCmds.h:106: syntax error before `cData'
> > > > pgtclCmds.h:118: syntax error before `cData'
> > > > pgtclCmds.h:120: syntax error before `cData'
> > > > pgtclCmds.h:123: syntax error before `cData'
> > > > pgtclCmds.h:125: syntax error before `cData'
> > > > pgtclCmds.h:127: syntax error before `cData'
> > > > pgtclCmds.h:129: syntax error before `cData'
> > > > pgtclCmds.h:131: syntax error before `cData'
> > > > pgtclCmds.h:133: syntax error before `cData'
> > > > pgtclCmds.h:135: syntax error before `cData'
> > > > pgtclCmds.h:137: syntax error before `cData'
> > > > In file included from pgtcl.c:21:
> > > > pgtclId.h:18: syntax error before `*'
> > > > pgtclId.h:37: syntax error before `*'
> > > > pgtclId.h:39: syntax error before `cData'
> > > > pgtclId.h:40: syntax error before `cData'
> > > > pgtclId.h:41: syntax error before `cData'
> > > > pgtclId.h:42: syntax error before `*'
> > > > pgtclId.h:43: syntax error before `*'
> > > > pgtclId.h:44: syntax error before `*'
> > > > pgtclId.h:45: syntax error before `*'
> > > > pgtclId.h:50: syntax error before `clientData'
> > > > pgtclId.h:63: syntax error before `Pg_ConnType'
> > > > pgtclId.h:63: warning: type defaults to `int' in declaration of
> > > > `Pg_ConnType'
> > > > pgtclId.h:63: warning: data definition has no type or storage class
> > > > pgtcl.c:30: syntax error before `*'
> > > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init'
> > > > pgtcl.c: In function `Pgtcl_Init':
> > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble'
> > > > pgtcl.c:48: `interp' undeclared (first use in this function)
> > > > pgtcl.c:48: (Each undeclared identifier is reported only once
> > > > pgtcl.c:48: for each function it appears in.)
> > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar'
> > > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function)
> > > > pgtcl.c:53: warning: implicit declaration of function
> `Tcl_CreateCommand'
> > > > pgtcl.c:56: `ClientData' undeclared (first use in this function)
> > > > pgtcl.c:56: syntax error before `0'
> > > > pgtcl.c:61: syntax error before `0'
> > > > pgtcl.c:66: syntax error before `0'
> > > > pgtcl.c:71: syntax error before `0'
> > > > pgtcl.c:76: syntax error before `0'
> > > > pgtcl.c:81: syntax error before `0'
> > > > pgtcl.c:86: syntax error before `0'
> > > > pgtcl.c:91: syntax error before `0'
> > > > pgtcl.c:96: syntax error before `0'
> > > > pgtcl.c:112: syntax error before `0'
> > > > pgtcl.c:117: syntax error before `0'
> > > > pgtcl.c:123: syntax error before `0'
> > > > pgtcl.c:128: syntax error before `0'
> > > > pgtcl.c:133: syntax error before `0'
> > > > pgtcl.c:138: syntax error before `0'
> > > > pgtcl.c:143: syntax error before `0'
> > > > pgtcl.c:148: syntax error before `0'
> > > > pgtcl.c:153: syntax error before `0'
> > > > pgtcl.c:158: syntax error before `0'
> > > > pgtcl.c:160: warning: implicit declaration of function
> `Tcl_PkgProvide'
> > > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function)
> > > > pgtcl.c:163: warning: control reaches end of non-void function
> > > > pgtcl.c: At top level:
> > > > pgtcl.c:167: syntax error before `*'
> > > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit'
> > > > pgtcl.c: In function `Pgtcl_SafeInit':
> > > > pgtcl.c:169: `interp' undeclared (first use in this function)
> > > > gmake[3]: *** [pgtcl.o] Error 1
> > > >
> > > > Aasmund Midttun Godal
> > > >
> > > > aasmund@godal.com - http://www.godal.com/
> > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
> > > >
> > > > ---------------------------(end of broadcast)------------------------
> ---
> > > > TIP 1: subscribe and unsubscribe commands go to
> majordomo@postgresql.org
> > >
> > > Aasmund Midttun Godal
> > >
> > > aasmund@godal.com - http://www.godal.com/
> > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
> > >
> > > ---------------------------(end of broadcast)--------------------------
> -
> > > TIP 4: Don't 'kill -9' the postmaster
> >
> > --
> > Dr. Eckhardt + Partner GmbH
> > http://www.epgmbh.de
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org
> >
>
> Aasmund Midttun Godal
>
> aasmund@godal.com - http://www.godal.com/
> +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
>
> ---------------------------(end of broadcast)---------------------------
> TIP 6: Have you searched our list archives?
>
> http://archives.postgresql.org
--
Brett Schwarz
brett_schwarz AT yahoo.com
Thank you for suggestion, however, $ locate tclConfig.sh /usr/local/lib/tcl8.0/tclConfig.sh /usr/local/lib/tcl8.3/tclConfig.sh so that should be ok, and as I said, it worked with 7.2 Regards, Aasmund. * Brett Schwarz <brett_schwarz@yahoo.com> wrote: > Are you sure that the tclConfig.sh file is located in > /usr/local/lib/tcl8.3/ ? > > By default, Tcl would install with PREFIX=/usr/local and then the > tclConfig.sh file will be installed in /usr/local/lib > > Check to make sure that the tclConfig.sh file is where you specified it, > and make sure it is valid... > > --brett > > On Mon, 2002-12-02 at 15:50, Aasmund Midttun Godal wrote: > > Thank you for responding, > > > > However, I hva all the tcl files installed, including tcl.h, and it worked > > with Pg 7.2 > > > > Regards, > > > > Aasmund. > > > > * Tommi Maekitalo <t.maekitalo@epgmbh.de> wrote: > > > Hi, > > > > > > tcl.h is missing. You have to install the developmentfiles of tcl. > > Normally > > > you can find it in tc-devel if you have linux. Configure should have > > > complained about it. > > > > > > > > > Tommi > > > > > > > > > Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal: > > > > Oh, and it's 7.3, obviously, sorry. > > > > > > > > Regards, > > > > > > > > Aasmund. > > > > > > > > * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > > > > > Hi! > > > > > > > > > > I am having trouble compiling postgres with tcl on OpenBSD. I have > > both > > > > > 8.0 and 8.3, and I have tried compiling with both of them. I also > > tried > > > > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with > > no > > > > > success. Compiling without tcl is no problem. configuring works fine, > > > > > > > > but > > > > > > > > > it fails at compile time. Here are my configure commands: > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > tclconfig=/usr/local/lib/tcl8.3/ --with- > > tkconfig=/usr/local/lib/tk8.3/ > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > > > > tclconfig=/usr/local/lib/tk8.0/ - > > > > > > > > > -with-tclconfig=/usr/local/lib/tk8.0/ > > > > > > > > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ > > > > > > > > > > ./configure --with-tcl --without-tk > > > > > > > > > > > > > > > Below is compilation error, it is, I believe, identical on all > > > > > configurations. > > > > > > > > > > All help will be greatly appreciated! > > > > > > > > > > Regards, > > > > > > > > > > Aasmund. > > > > > > > > > > > > > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations - > > fpic - > > > > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o > > > > > pgtcl.o pgtcl.c > > > > > In file included from pgtcl.c:19: > > > > > libpgtcl.h:19: tcl.h: No such file or directory > > > > > In file included from pgtcl.c:20: > > > > > pgtclCmds.h:17: tcl.h: No such file or directory > > > > > In file included from pgtcl.c:19: > > > > > libpgtcl.h:21: syntax error before `*' > > > > > libpgtcl.h:22: syntax error before `*' > > > > > In file included from pgtcl.c:20: > > > > > pgtclCmds.h:47: syntax error before `Tcl_Interp' > > > > > pgtclCmds.h:90: syntax error before `cData' > > > > > pgtclCmds.h:92: syntax error before `cData' > > > > > pgtclCmds.h:94: syntax error before `cData' > > > > > pgtclCmds.h:96: syntax error before `cData' > > > > > pgtclCmds.h:98: syntax error before `cData' > > > > > pgtclCmds.h:100: syntax error before `cData' > > > > > pgtclCmds.h:102: syntax error before `cData' > > > > > pgtclCmds.h:104: syntax error before `cData' > > > > > pgtclCmds.h:106: syntax error before `cData' > > > > > pgtclCmds.h:118: syntax error before `cData' > > > > > pgtclCmds.h:120: syntax error before `cData' > > > > > pgtclCmds.h:123: syntax error before `cData' > > > > > pgtclCmds.h:125: syntax error before `cData' > > > > > pgtclCmds.h:127: syntax error before `cData' > > > > > pgtclCmds.h:129: syntax error before `cData' > > > > > pgtclCmds.h:131: syntax error before `cData' > > > > > pgtclCmds.h:133: syntax error before `cData' > > > > > pgtclCmds.h:135: syntax error before `cData' > > > > > pgtclCmds.h:137: syntax error before `cData' > > > > > In file included from pgtcl.c:21: > > > > > pgtclId.h:18: syntax error before `*' > > > > > pgtclId.h:37: syntax error before `*' > > > > > pgtclId.h:39: syntax error before `cData' > > > > > pgtclId.h:40: syntax error before `cData' > > > > > pgtclId.h:41: syntax error before `cData' > > > > > pgtclId.h:42: syntax error before `*' > > > > > pgtclId.h:43: syntax error before `*' > > > > > pgtclId.h:44: syntax error before `*' > > > > > pgtclId.h:45: syntax error before `*' > > > > > pgtclId.h:50: syntax error before `clientData' > > > > > pgtclId.h:63: syntax error before `Pg_ConnType' > > > > > pgtclId.h:63: warning: type defaults to `int' in declaration of > > > > > `Pg_ConnType' > > > > > pgtclId.h:63: warning: data definition has no type or storage class > > > > > pgtcl.c:30: syntax error before `*' > > > > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' > > > > > pgtcl.c: In function `Pgtcl_Init': > > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' > > > > > pgtcl.c:48: `interp' undeclared (first use in this function) > > > > > pgtcl.c:48: (Each undeclared identifier is reported only once > > > > > pgtcl.c:48: for each function it appears in.) > > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' > > > > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) > > > > > pgtcl.c:53: warning: implicit declaration of function > > `Tcl_CreateCommand' > > > > > pgtcl.c:56: `ClientData' undeclared (first use in this function) > > > > > pgtcl.c:56: syntax error before `0' > > > > > pgtcl.c:61: syntax error before `0' > > > > > pgtcl.c:66: syntax error before `0' > > > > > pgtcl.c:71: syntax error before `0' > > > > > pgtcl.c:76: syntax error before `0' > > > > > pgtcl.c:81: syntax error before `0' > > > > > pgtcl.c:86: syntax error before `0' > > > > > pgtcl.c:91: syntax error before `0' > > > > > pgtcl.c:96: syntax error before `0' > > > > > pgtcl.c:112: syntax error before `0' > > > > > pgtcl.c:117: syntax error before `0' > > > > > pgtcl.c:123: syntax error before `0' > > > > > pgtcl.c:128: syntax error before `0' > > > > > pgtcl.c:133: syntax error before `0' > > > > > pgtcl.c:138: syntax error before `0' > > > > > pgtcl.c:143: syntax error before `0' > > > > > pgtcl.c:148: syntax error before `0' > > > > > pgtcl.c:153: syntax error before `0' > > > > > pgtcl.c:158: syntax error before `0' > > > > > pgtcl.c:160: warning: implicit declaration of function > > `Tcl_PkgProvide' > > > > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function) > > > > > pgtcl.c:163: warning: control reaches end of non-void function > > > > > pgtcl.c: At top level: > > > > > pgtcl.c:167: syntax error before `*' > > > > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' > > > > > pgtcl.c: In function `Pgtcl_SafeInit': > > > > > pgtcl.c:169: `interp' undeclared (first use in this function) > > > > > gmake[3]: *** [pgtcl.o] Error 1 > > > > > > > > > > Aasmund Midttun Godal > > > > > > > > > > aasmund@godal.com - http://www.godal.com/ > > > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > > > > > ---------------------------(end of broadcast)------------------------ > > --- > > > > > TIP 1: subscribe and unsubscribe commands go to > > majordomo@postgresql.org > > > > > > > > Aasmund Midttun Godal > > > > > > > > aasmund@godal.com - http://www.godal.com/ > > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > > > ---------------------------(end of broadcast)-------------------------- > > - > > > > TIP 4: Don't 'kill -9' the postmaster > > > > > > -- > > > Dr. Eckhardt + Partner GmbH > > > http://www.epgmbh.de > > > > > > ---------------------------(end of broadcast)--------------------------- > > > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > > > > > > > Aasmund Midttun Godal > > > > aasmund@godal.com - http://www.godal.com/ > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > ---------------------------(end of broadcast)--------------------------- > > TIP 6: Have you searched our list archives? > > > > http://archives.postgresql.org > -- > Brett Schwarz > brett_schwarz AT yahoo.com > > Aasmund Midttun Godal aasmund@godal.com - http://www.godal.com/ +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
Problem solved. Postgresql does not configure in the correct include directories. Adding the appropriate include directoriessolves the problem. Thanx for help, Aasmund. * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > Thank you for suggestion, however, > > $ locate tclConfig.sh > /usr/local/lib/tcl8.0/tclConfig.sh > /usr/local/lib/tcl8.3/tclConfig.sh > > so that should be ok, and as I said, it worked with 7.2 > > Regards, > > Aasmund. > * Brett Schwarz <brett_schwarz@yahoo.com> wrote: > > Are you sure that the tclConfig.sh file is located in > > /usr/local/lib/tcl8.3/ ? > > > > By default, Tcl would install with PREFIX=/usr/local and then the > > tclConfig.sh file will be installed in /usr/local/lib > > > > Check to make sure that the tclConfig.sh file is where you specified it, > > and make sure it is valid... > > > > --brett > > > > On Mon, 2002-12-02 at 15:50, Aasmund Midttun Godal wrote: > > > Thank you for responding, > > > > > > However, I hva all the tcl files installed, including tcl.h, and it worked > > > with Pg 7.2 > > > > > > Regards, > > > > > > Aasmund. > > > > > > * Tommi Maekitalo <t.maekitalo@epgmbh.de> wrote: > > > > Hi, > > > > > > > > tcl.h is missing. You have to install the developmentfiles of tcl. > > > Normally > > > > you can find it in tc-devel if you have linux. Configure should have > > > > complained about it. > > > > > > > > > > > > Tommi > > > > > > > > > > > > Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal: > > > > > Oh, and it's 7.3, obviously, sorry. > > > > > > > > > > Regards, > > > > > > > > > > Aasmund. > > > > > > > > > > * Aasmund Midttun Godal <postgresql@aasmund.com> wrote: > > > > > > Hi! > > > > > > > > > > > > I am having trouble compiling postgres with tcl on OpenBSD. I have > > > both > > > > > > 8.0 and 8.3, and I have tried compiling with both of them. I also > > > tried > > > > > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with > > > no > > > > > > success. Compiling without tcl is no problem. configuring works fine, > > > > > > > > > > but > > > > > > > > > > > it fails at compile time. Here are my configure commands: > > > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk > > > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > > tclconfig=/usr/local/lib/tcl8.3/ --with- > > > tkconfig=/usr/local/lib/tk8.3/ > > > > > > > > > > > > ./configure --with-perl --with-tcl --with- > > > > > > > > > > tclconfig=/usr/local/lib/tk8.0/ - > > > > > > > > > > > -with-tclconfig=/usr/local/lib/tk8.0/ > > > > > > > > > > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/ > > > > > > > > > > > > ./configure --with-tcl --without-tk > > > > > > > > > > > > > > > > > > Below is compilation error, it is, I believe, identical on all > > > > > > configurations. > > > > > > > > > > > > All help will be greatly appreciated! > > > > > > > > > > > > Regards, > > > > > > > > > > > > Aasmund. > > > > > > > > > > > > > > > > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations - > > > fpic - > > > > > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o > > > > > > pgtcl.o pgtcl.c > > > > > > In file included from pgtcl.c:19: > > > > > > libpgtcl.h:19: tcl.h: No such file or directory > > > > > > In file included from pgtcl.c:20: > > > > > > pgtclCmds.h:17: tcl.h: No such file or directory > > > > > > In file included from pgtcl.c:19: > > > > > > libpgtcl.h:21: syntax error before `*' > > > > > > libpgtcl.h:22: syntax error before `*' > > > > > > In file included from pgtcl.c:20: > > > > > > pgtclCmds.h:47: syntax error before `Tcl_Interp' > > > > > > pgtclCmds.h:90: syntax error before `cData' > > > > > > pgtclCmds.h:92: syntax error before `cData' > > > > > > pgtclCmds.h:94: syntax error before `cData' > > > > > > pgtclCmds.h:96: syntax error before `cData' > > > > > > pgtclCmds.h:98: syntax error before `cData' > > > > > > pgtclCmds.h:100: syntax error before `cData' > > > > > > pgtclCmds.h:102: syntax error before `cData' > > > > > > pgtclCmds.h:104: syntax error before `cData' > > > > > > pgtclCmds.h:106: syntax error before `cData' > > > > > > pgtclCmds.h:118: syntax error before `cData' > > > > > > pgtclCmds.h:120: syntax error before `cData' > > > > > > pgtclCmds.h:123: syntax error before `cData' > > > > > > pgtclCmds.h:125: syntax error before `cData' > > > > > > pgtclCmds.h:127: syntax error before `cData' > > > > > > pgtclCmds.h:129: syntax error before `cData' > > > > > > pgtclCmds.h:131: syntax error before `cData' > > > > > > pgtclCmds.h:133: syntax error before `cData' > > > > > > pgtclCmds.h:135: syntax error before `cData' > > > > > > pgtclCmds.h:137: syntax error before `cData' > > > > > > In file included from pgtcl.c:21: > > > > > > pgtclId.h:18: syntax error before `*' > > > > > > pgtclId.h:37: syntax error before `*' > > > > > > pgtclId.h:39: syntax error before `cData' > > > > > > pgtclId.h:40: syntax error before `cData' > > > > > > pgtclId.h:41: syntax error before `cData' > > > > > > pgtclId.h:42: syntax error before `*' > > > > > > pgtclId.h:43: syntax error before `*' > > > > > > pgtclId.h:44: syntax error before `*' > > > > > > pgtclId.h:45: syntax error before `*' > > > > > > pgtclId.h:50: syntax error before `clientData' > > > > > > pgtclId.h:63: syntax error before `Pg_ConnType' > > > > > > pgtclId.h:63: warning: type defaults to `int' in declaration of > > > > > > `Pg_ConnType' > > > > > > pgtclId.h:63: warning: data definition has no type or storage class > > > > > > pgtcl.c:30: syntax error before `*' > > > > > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init' > > > > > > pgtcl.c: In function `Pgtcl_Init': > > > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble' > > > > > > pgtcl.c:48: `interp' undeclared (first use in this function) > > > > > > pgtcl.c:48: (Each undeclared identifier is reported only once > > > > > > pgtcl.c:48: for each function it appears in.) > > > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar' > > > > > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function) > > > > > > pgtcl.c:53: warning: implicit declaration of function > > > `Tcl_CreateCommand' > > > > > > pgtcl.c:56: `ClientData' undeclared (first use in this function) > > > > > > pgtcl.c:56: syntax error before `0' > > > > > > pgtcl.c:61: syntax error before `0' > > > > > > pgtcl.c:66: syntax error before `0' > > > > > > pgtcl.c:71: syntax error before `0' > > > > > > pgtcl.c:76: syntax error before `0' > > > > > > pgtcl.c:81: syntax error before `0' > > > > > > pgtcl.c:86: syntax error before `0' > > > > > > pgtcl.c:91: syntax error before `0' > > > > > > pgtcl.c:96: syntax error before `0' > > > > > > pgtcl.c:112: syntax error before `0' > > > > > > pgtcl.c:117: syntax error before `0' > > > > > > pgtcl.c:123: syntax error before `0' > > > > > > pgtcl.c:128: syntax error before `0' > > > > > > pgtcl.c:133: syntax error before `0' > > > > > > pgtcl.c:138: syntax error before `0' > > > > > > pgtcl.c:143: syntax error before `0' > > > > > > pgtcl.c:148: syntax error before `0' > > > > > > pgtcl.c:153: syntax error before `0' > > > > > > pgtcl.c:158: syntax error before `0' > > > > > > pgtcl.c:160: warning: implicit declaration of function > > > `Tcl_PkgProvide' > > > > > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function) > > > > > > pgtcl.c:163: warning: control reaches end of non-void function > > > > > > pgtcl.c: At top level: > > > > > > pgtcl.c:167: syntax error before `*' > > > > > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit' > > > > > > pgtcl.c: In function `Pgtcl_SafeInit': > > > > > > pgtcl.c:169: `interp' undeclared (first use in this function) > > > > > > gmake[3]: *** [pgtcl.o] Error 1 > > > > > > > > > > > > Aasmund Midttun Godal > > > > > > > > > > > > aasmund@godal.com - http://www.godal.com/ > > > > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > > > > > > > ---------------------------(end of broadcast)------------------------ > > > --- > > > > > > TIP 1: subscribe and unsubscribe commands go to > > > majordomo@postgresql.org > > > > > > > > > > Aasmund Midttun Godal > > > > > > > > > > aasmund@godal.com - http://www.godal.com/ > > > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > > > > > ---------------------------(end of broadcast)-------------------------- > > > - > > > > > TIP 4: Don't 'kill -9' the postmaster > > > > > > > > -- > > > > Dr. Eckhardt + Partner GmbH > > > > http://www.epgmbh.de > > > > > > > > ---------------------------(end of broadcast)--------------------------- > > > > TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org > > > > > > > > > > Aasmund Midttun Godal > > > > > > aasmund@godal.com - http://www.godal.com/ > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > > > > > ---------------------------(end of broadcast)--------------------------- > > > TIP 6: Have you searched our list archives? > > > > > > http://archives.postgresql.org > > -- > > Brett Schwarz > > brett_schwarz AT yahoo.com > > > > > > Aasmund Midttun Godal > > aasmund@godal.com - http://www.godal.com/ > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim > > ---------------------------(end of broadcast)--------------------------- > TIP 5: Have you checked our extensive FAQ? > > http://www.postgresql.org/users-lounge/docs/faq.html > Aasmund Midttun Godal aasmund@godal.com - http://www.godal.com/ +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim