Thread: perl 5.6.0 almost working!

perl 5.6.0 almost working!

From
"John M. Flinchbaugh"
Date:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
POLLUTE=1 option as necessary, which makes it work for make all, but
doing a ``make install'' uses the perl5-install, which does not build the
perl5/Makefile with POLLUTE=1.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjrpv0ACgkQCGPRljI8081+3wCeOf6w9e9nwwJr3TFWchbWasoy
T68An208BF3dn/apwNrjzguwh+LBsD/4
=lqRo
-----END PGP SIGNATURE-----

Re: perl 5.6.0 almost working!

From
Bruce Momjian
Date:
-- Start of PGP signed section.
> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> POLLUTE=1 option as necessary, which makes it work for make all, but
> doing a ``make install'' uses the perl5-install, which does not build the
> perl5/Makefile with POLLUTE=1.

Well, that is interesting.  I am quite confused how Makefile can get
generated without the parameter.  Can you suggest a patch?

--
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026

Re: perl 5.6.0 almost working!

From
Tom Lane
Date:
Bruce Momjian <pgman@candle.pha.pa.us> writes:
>> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
>> POLLUTE=1 option as necessary, which makes it work for make all, but
>> doing a ``make install'' uses the perl5-install, which does not build the
>> perl5/Makefile with POLLUTE=1.

Oops...

> Well, that is interesting.  I am quite confused how Makefile can get
> generated without the parameter.  Can you suggest a patch?

I believe he meant that line 54 needs to have POLLUTE=1 too ...

            regards, tom lane

Re: perl 5.6.0 almost working!

From
Bruce Momjian
Date:
> Bruce Momjian <pgman@candle.pha.pa.us> writes:
> >> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> >> POLLUTE=1 option as necessary, which makes it work for make all, but
> >> doing a ``make install'' uses the perl5-install, which does not build the
> >> perl5/Makefile with POLLUTE=1.
>
> Oops...
>
> > Well, that is interesting.  I am quite confused how Makefile can get
> > generated without the parameter.  Can you suggest a patch?
>
> I believe he meant that line 54 needs to have POLLUTE=1 too ...
>

Got it.  Done.  I was confused between plperl and interfaces/perl.  I
assume plperl still does not work, right?

--
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026

Re: perl 5.6.0 almost working!

From
Tom Lane
Date:
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> Got it.  Done.  I was confused between plperl and interfaces/perl.  I
> assume plperl still does not work, right?

Not for me ... but then I'm working on this tool-of-the-devil
HPUX OS ;-) ;-)

Has anyone else tried to use plperl?  Either success or failure
reports would be useful at this point.

            regards, tom lane

Re: perl 5.6.0 almost working!

From
"John M. Flinchbaugh"
Date:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Bruce Momjian wrote:
> > it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> > POLLUTE=1 option as necessary, which makes it work for make all, but
> > doing a ``make install'' uses the perl5-install, which does not build the
> > perl5/Makefile with POLLUTE=1.
> Well, that is interesting.  I am quite confused how Makefile can get
> generated without the parameter.  Can you suggest a patch?

well this is what the block in src/interfaces/Makefile needs to look like
in the end:
...
perl5/Makefile: perl5/Makefile.PL
    cd perl5 && $(PERL) Makefile.PL POLLUTE=1

install-perl5: perl5/Makefile
    $(MAKE) -C perl5 clean
    cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
    $(MAKE) -C perl5 all
    -@if [ -w `sed -n -e 's/^ *INSTALLSITELIB *= *//p' perl5/Makefile` ]; then \
        $(MAKE) $(MFLAGS) -C perl5 install; \
        rm -f perl5/Makefile; \
    else \
        echo "Skipping install of Perl module for lack of permissions."; \
        echo "To install it, cd into interfaces/perl5, su to become the"; \
        echo "appropriate user, and do '$(MAKE) install'."; \
    fi

.PHONY: install-perl5
- ---

note the change from:
cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL
to:
cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1

thanks for you time.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHLQACgkQCGPRljI8080/9gCdHqJv44OAWI+N8mEHr84IvgBH
1kcAnRiLAOAXyM4dZx0X2fDDr4kVG8hq
=PAi3
-----END PGP SIGNATURE-----

Re: perl 5.6.0 almost working!

From
"John M. Flinchbaugh"
Date:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Bruce Momjian wrote:
> Got it.  Done.  I was confused between plperl and interfaces/perl.  I
> assume plperl still does not work, right?

that one seems to have been fixed already for beta4, so it works
wonderfully.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHZoACgkQCGPRljI8081SlgCeJPWvuLB/tAJKf+/0qqV+GB5o
Q1oAn1+RaeSgMvFWRh+NrSK7QA/1970d
=OYIa
-----END PGP SIGNATURE-----

Re: perl 5.6.0 almost working!

From
"John M. Flinchbaugh"
Date:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Tom Lane wrote:
> Has anyone else tried to use plperl?  Either success or failure
> reports would be useful at this point.

i've build the plperl.so without error, but i have not actually tested it
to see how it works.  i'm unfortunately unfamiliar with it at this
point.  i just wanted it to build, so i could someday learn it.
i'm using it with glibc 2.1.2, linux 2.2.12, intel pentium.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHi8ACgkQCGPRljI8082FzgCeN5bBPEpSZEfDRCnOILl6XlXF
p/gAnjrY3Rj9kGOxCLoUBJnw+zMA5FOS
=zb/5
-----END PGP SIGNATURE-----

Re: perl 5.6.0 almost working!

From
Peter Eisentraut
Date:
On Wed, 5 Apr 2000, Tom Lane wrote:

> Has anyone else tried to use plperl?  Either success or failure
> reports would be useful at this point.

Failure. (sparc-sun-solaris2.5.1)


Looks like this:
$ make
....
Running Mkbootstrap for plperl ()
chmod 644 plperl.bs
LD_RUN_PATH="" gcc -o blib/arch/auto/plperl/plperl.so  -G plperl.o
eloglvl.o SPI.o
/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/auto/Opcode/Opcode.so
-L../../../src/interfaces/libpq -lpq
/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/auto/DynaLoader/DynaLoader.a
-L/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/CORE -lperl -lsocket -lnsl
-lgdbm -ldl -lm -lc -lcrypt -ldb
ld: fatal: library -ldb: not found
ld: fatal: File processing errors. No output written to
blib/arch/auto/plperl/plperl.so
make: *** [blib/arch/auto/plperl/plperl.so] Error 1

(There is indeed no libdb of any sort on this system AFAICT. I'm just a
pedestrian though, does anyone know what it is supposed to be for?)

That sure sounds like Perl once again trying to circumvent the autoconf
logic.

--
Peter Eisentraut                  Sernanders väg 10:115
peter_e@gmx.net                   75262 Uppsala
http://yi.org/peter-e/            Sweden

Re: perl 5.6.0 almost working!

From
Bruce Momjian
Date:
Got it.   Thanks.


-- Start of PGP signed section.
> On Wed, 5 Apr 2000, Bruce Momjian wrote:
> > > it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> > > POLLUTE=1 option as necessary, which makes it work for make all, but
> > > doing a ``make install'' uses the perl5-install, which does not build the
> > > perl5/Makefile with POLLUTE=1.
> > Well, that is interesting.  I am quite confused how Makefile can get
> > generated without the parameter.  Can you suggest a patch?
>
> well this is what the block in src/interfaces/Makefile needs to look like
> in the end:
> ...
> perl5/Makefile: perl5/Makefile.PL
>     cd perl5 && $(PERL) Makefile.PL POLLUTE=1
>
> install-perl5: perl5/Makefile
>     $(MAKE) -C perl5 clean
>     cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
>     $(MAKE) -C perl5 all
>     -@if [ -w `sed -n -e 's/^ *INSTALLSITELIB *= *//p' perl5/Makefile` ]; then \
>         $(MAKE) $(MFLAGS) -C perl5 install; \
>         rm -f perl5/Makefile; \
>     else \
>         echo "Skipping install of Perl module for lack of permissions."; \
>         echo "To install it, cd into interfaces/perl5, su to become the"; \
>         echo "appropriate user, and do '$(MAKE) install'."; \
>     fi
>
> .PHONY: install-perl5
> ---
>
> note the change from:
> cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL
> to:
> cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
>
> thanks for you time.
>
> ____________________}John Flinchbaugh{______________________
> | glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
> ~~Powered by Linux: Reboots are for hardware upgrades only~~-- End of PGP signed section.


--
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026