Re: Improve eviction algorithm in ReorderBuffer - Mailing list pgsql-hackers

From Shubham Khanna
Subject Re: Improve eviction algorithm in ReorderBuffer
Date
Msg-id CAHv8RjJbd-EVs=YJLL6=XAA0ETbK-r8Zm5subP0CAuafOMbj1A@mail.gmail.com
Whole thread Raw
In response to Re: Improve eviction algorithm in ReorderBuffer  (Masahiko Sawada <sawada.mshk@gmail.com>)
Responses Re: Improve eviction algorithm in ReorderBuffer
List pgsql-hackers
On Fri, Jan 26, 2024 at 2:07 PM Masahiko Sawada <sawada.mshk@gmail.com> wrote:
>
> On Wed, Dec 20, 2023 at 12:11 PM Amit Kapila <amit.kapila16@gmail.com> wrote:
> >
> > On Wed, Dec 20, 2023 at 6:49 AM Masahiko Sawada <sawada.mshk@gmail.com> wrote:
> > >
> > > On Tue, Dec 19, 2023 at 8:02 PM Amit Kapila <amit.kapila16@gmail.com> wrote:
> > > >
> > > > On Tue, Dec 19, 2023 at 8:31 AM Masahiko Sawada <sawada.mshk@gmail.com> wrote:
> > > > >
> > > > > On Sun, Dec 17, 2023 at 11:40 AM Amit Kapila <amit.kapila16@gmail.com> wrote:
> > > > > >
> > > > > >
> > > > > > The individual transactions shouldn't cross
> > > > > > 'logical_decoding_work_mem'. I got a bit confused by your proposal to
> > > > > > maintain the lists: "...splitting it into two lists: transactions
> > > > > > consuming 5% < and 5% >=  of the memory limit, and checking the 5% >=
> > > > > > list preferably.". In the previous sentence, what did you mean by
> > > > > > transactions consuming 5% >= of the memory limit? I got the impression
> > > > > > that you are saying to maintain them in a separate transaction list
> > > > > > which doesn't seems to be the case.
> > > > >
> > > > > I wanted to mean that there are three lists in total: the first one
> > > > > maintain the transactions consuming more than 10% of
> > > > > logical_decoding_work_mem,
> > > > >
> > > >
> > > > How can we have multiple transactions in the list consuming more than
> > > > 10% of logical_decoding_work_mem? Shouldn't we perform serialization
> > > > before any xact reaches logical_decoding_work_mem?
> > >
> > > Well, suppose logical_decoding_work_mem is set to 64MB, transactions
> > > consuming more than 6.4MB are added to the list. So for example, it's
> > > possible that the list has three transactions each of which are
> > > consuming 10MB while the total memory usage in the reorderbuffer is
> > > still 30MB (less than logical_decoding_work_mem).
> > >
> >
> > Thanks for the clarification. I misunderstood the list to have
> > transactions greater than 70.4 MB (64 + 6.4) in your example. But one
> > thing to note is that maintaining these lists by default can also have
> > some overhead unless the list of open transactions crosses a certain
> > threshold.
> >
>
> On further analysis, I realized that the approach discussed here might
> not be the way to go. The idea of dividing transactions into several
> subgroups is to divide a large number of entries into multiple
> sub-groups so we can reduce the complexity to search for the
> particular entry. Since we assume that there are no big differences in
> entries' sizes within a sub-group, we can pick the entry to evict in
> O(1). However, what we really need to avoid here is that we end up
> increasing the number of times to evict entries because serializing an
> entry to the disk is more costly than searching an entry on memory in
> general.
>
> I think that it's no problem in a large-entries subgroup but when it
> comes to the smallest-entries subgroup, like for entries consuming
> less than 5% of the limit, it could end up evicting many entries. For
> example, there would be a huge difference between serializing 1 entry
> consuming 5% of the memory limit and serializing 5000 entries
> consuming 0.001% of the memory limit. Even if we can select 5000
> entries quickly, I think the latter would be slower in total. The more
> subgroups we create, the more the algorithm gets complex and the
> overheads could cause. So I think we need to search for the largest
> entry in order to minimize the number of evictions anyway.
>
> Looking for data structures and algorithms, I think binaryheap with
> some improvements could be promising. I mentioned before why we cannot
> use the current binaryheap[1]. The missing pieces are efficient ways
> to remove the arbitrary entry and to update the arbitrary entry's key.
> The current binaryheap provides binaryheap_remove_node(), which is
> O(log n), but it requires the entry's position in the binaryheap. We
> can know the entry's position just after binaryheap_add_unordered()
> but it might be changed after heapify. Searching the node's position
> is O(n). So the improvement idea is to add a hash table to the
> binaryheap so that it can track the positions for each entry so that
> we can remove the arbitrary entry in O(log n) and also update the
> arbitrary entry's key in O(log n). This is known as the indexed
> priority queue. I've attached the patch for that (0001 and 0002).
>
> That way, in terms of reorderbuffer, we can update and remove the
> transaction's memory usage in O(log n) (in worst case and O(1) in
> average) and then pick the largest transaction in O(1). Since we might
> need to call ReorderBufferSerializeTXN() even in non-streaming case,
> we need to maintain the binaryheap anyway. I've attached the patch for
> that (0003).
>
> Here are test script for many sub-transactions case:
>
> create table test (c int);
> create or replace function testfn (cnt int) returns void as $$
> begin
>   for i in 1..cnt loop
>     begin
>       insert into test values (i);
>     exception when division_by_zero then
>       raise notice 'caught error';
>       return;
>     end;
>   end loop;
> end;
> $$
> language plpgsql;
> select pg_create_logical_replication_slot('s', 'test_decoding');
> select testfn(50000);
> set logical_decoding_work_mem to '4MB';
> select count(*) from pg_logical_slot_peek_changes('s', null, null)";
>
> and here are results:
>
> * HEAD: 16877.281 ms
> * HEAD w/ patches (0001 and 0002): 655.154 ms
>
> There is huge improvement in a many-subtransactions case.

I have run the same test and found around 12.53x improvement(the
median of five executions):
HEAD        | HEAD+ v2-0001+ v2-0002 + v2-0003 patch
29197ms   | 2329ms

I had also run the regression test that you had shared at [1], there
was a very very slight dip in this case around it takes around 0.31x
more time:
HEAD        | HEAD + v2-0001+ v2-0002 + v2-0003 patch
4459ms     | 4473ms

The machine has Total Memory of 755.536 GB, 120 CPUs and RHEL 7
Operating System. Also find the detailed info of the performance
machine attached.

[1] - https://www.postgresql.org/message-id/CAD21AoB-7mPpKnLmBNfzfavG8AiTwEgAdVMuv%3DjzmAp9ex7eyQ%40mail.gmail.com

Thanks and Regards,
Shubham Khanna.

Attachment

pgsql-hackers by date:

Previous
From: Amit Kapila
Date:
Subject: Re: Synchronizing slots from primary to standby
Next
From: vignesh C
Date:
Subject: Commitfest 2024-01 is now closed