28.2. The Cumulative Statistics System

PostgreSQL's cumulative statistics system supports collection and reporting of information about server activity. Presently, accesses to tables and indexes in both disk-block and individual-row terms are counted. The total number of rows in each table, and information about vacuum and analyze actions for each table are also counted. If enabled, calls to user-defined functions and the total time spent in each one are counted as well.

PostgreSQL also supports reporting dynamic information about exactly what is going on in the system right now, such as the exact command currently being executed by other server processes, and which other connections exist in the system. This facility is independent of the cumulative statistics system.

28.2.1. Statistics Collection Configuration

Since collection of statistics adds some overhead to query execution, the system can be configured to collect or not collect information. This is controlled by configuration parameters that are normally set in postgresql.conf. (See Chapter 20 for details about setting configuration parameters.)

The parameter track_activities enables monitoring of the current command being executed by any server process.

The parameter track_counts controls whether cumulative statistics are collected about table and index accesses.

The parameter track_functions enables tracking of usage of user-defined functions.

The parameter track_io_timing enables monitoring of block read and write times.

The parameter track_wal_io_timing enables monitoring of WAL write times.

Normally these parameters are set in postgresql.conf so that they apply to all server processes, but it is possible to turn them on or off in individual sessions using the SET command. (To prevent ordinary users from hiding their activity from the administrator, only superusers are allowed to change these parameters with SET.)

Cumulative statistics are collected in shared memory. Every PostgreSQL process collects statistics locally, then updates the shared data at appropriate intervals. When a server, including a physical replica, shuts down cleanly, a permanent copy of the statistics data is stored in the pg_stat subdirectory, so that statistics can be retained across server restarts. In contrast, when starting from an unclean shutdown (e.g., after an immediate shutdown, a server crash, starting from a base backup, and point-in-time recovery), all statistics counters are reset.

28.2.2. Viewing Statistics

Several predefined views, listed in Table 28.1, are available to show the current state of the system. There are also several other views, listed in Table 28.2, available to show the accumulated statistics. Alternatively, one can build custom views using the underlying cumulative statistics functions, as discussed in Section 28.2.24.

When using the cumulative statistics views and functions to monitor collected data, it is important to realize that the information does not update instantaneously. Each individual server process flushes out accumulated statistics to shared memory just before going idle, but not more frequently than once per PGSTAT_MIN_INTERVAL milliseconds (1 second unless altered while building the server); so a query or transaction still in progress does not affect the displayed totals and the displayed information lags behind actual activity. However, current-query information collected by track_activities is always up-to-date.

Another important point is that when a server process is asked to display any of the accumulated statistics, accessed values are cached until the end of its current transaction in the default configuration. So the statistics will show static information as long as you continue the current transaction. Similarly, information about the current queries of all sessions is collected when any such information is first requested within a transaction, and the same information will be displayed throughout the transaction. This is a feature, not a bug, because it allows you to perform several queries on the statistics and correlate the results without worrying that the numbers are changing underneath you. When analyzing statistics interactively, or with expensive queries, the time delta between accesses to individual statistics can lead to significant skew in the cached statistics. To minimize skew, stats_fetch_consistency can be set to snapshot, at the price of increased memory usage for caching not-needed statistics data. Conversely, if it's known that statistics are only accessed once, caching accessed statistics is unnecessary and can be avoided by setting stats_fetch_consistency to none. You can invoke pg_stat_clear_snapshot() to discard the current transaction's statistics snapshot or cached values (if any). The next use of statistical information will (when in snapshot mode) cause a new snapshot to be built or (when in cache mode) accessed statistics to be cached.

A transaction can also see its own statistics (not yet flushed out to the shared memory statistics) in the views pg_stat_xact_all_tables, pg_stat_xact_sys_tables, pg_stat_xact_user_tables, and pg_stat_xact_user_functions. These numbers do not act as stated above; instead they update continuously throughout the transaction.

Some of the information in the dynamic statistics views shown in Table 28.1 is security restricted. Ordinary users can only see all the information about their own sessions (sessions belonging to a role that they are a member of). In rows about other sessions, many columns will be null. Note, however, that the existence of a session and its general properties such as its sessions user and database are visible to all users. Superusers and roles with privileges of built-in role pg_read_all_stats (see also Section 22.5) can see all the information about all sessions.

Table 28.1. Dynamic Statistics Views

View NameDescription
pg_stat_activity One row per server process, showing information related to the current activity of that process, such as state and current query. See pg_stat_activity for details.
pg_stat_replicationOne row per WAL sender process, showing statistics about replication to that sender's connected standby server. See pg_stat_replication for details.
pg_stat_wal_receiverOnly one row, showing statistics about the WAL receiver from that receiver's connected server. See pg_stat_wal_receiver for details.
pg_stat_recovery_prefetchOnly one row, showing statistics about blocks prefetched during recovery. See pg_stat_recovery_prefetch for details.
pg_stat_subscriptionAt least one row per subscription, showing information about the subscription workers. See pg_stat_subscription for details.
pg_stat_sslOne row per connection (regular and replication), showing information about SSL used on this connection. See pg_stat_ssl for details.
pg_stat_gssapiOne row per connection (regular and replication), showing information about GSSAPI authentication and encryption used on this connection. See pg_stat_gssapi for details.
pg_stat_progress_analyzeOne row for each backend (including autovacuum worker processes) running ANALYZE, showing current progress. See Section 28.4.1.
pg_stat_progress_create_indexOne row for each backend running CREATE INDEX or REINDEX, showing current progress. See Section 28.4.2.
pg_stat_progress_vacuumOne row for each backend (including autovacuum worker processes) running VACUUM, showing current progress. See Section 28.4.3.
pg_stat_progress_clusterOne row for each backend running CLUSTER or VACUUM FULL, showing current progress. See Section 28.4.4.
pg_stat_progress_basebackupOne row for each WAL sender process streaming a base backup, showing current progress. See Section 28.4.5.
pg_stat_progress_copyOne row for each backend running COPY, showing current progress. See Section 28.4.6.

Table 28.2. Collected Statistics Views

View NameDescription
pg_stat_archiverOne row only, showing statistics about the WAL archiver process's activity. See pg_stat_archiver for details.
pg_stat_bgwriterOne row only, showing statistics about the background writer process's activity. See pg_stat_bgwriter for details.
pg_stat_walOne row only, showing statistics about WAL activity. See pg_stat_wal for details.
pg_stat_databaseOne row per database, showing database-wide statistics. See pg_stat_database for details.
pg_stat_database_conflicts One row per database, showing database-wide statistics about query cancels due to conflict with recovery on standby servers. See pg_stat_database_conflicts for details.
pg_stat_all_tables One row for each table in the current database, showing statistics about accesses to that specific table. See pg_stat_all_tables for details.
pg_stat_sys_tablesSame as pg_stat_all_tables, except that only system tables are shown.
pg_stat_user_tablesSame as pg_stat_all_tables, except that only user tables are shown.
pg_stat_xact_all_tablesSimilar to pg_stat_all_tables, but counts actions taken so far within the current transaction (which are not yet included in pg_stat_all_tables and related views). The columns for numbers of live and dead rows and vacuum and analyze actions are not present in this view.
pg_stat_xact_sys_tablesSame as pg_stat_xact_all_tables, except that only system tables are shown.
pg_stat_xact_user_tablesSame as pg_stat_xact_all_tables, except that only user tables are shown.
pg_stat_all_indexes One row for each index in the current database, showing statistics about accesses to that specific index. See pg_stat_all_indexes for details.
pg_stat_sys_indexesSame as pg_stat_all_indexes, except that only indexes on system tables are shown.
pg_stat_user_indexesSame as pg_stat_all_indexes, except that only indexes on user tables are shown.
pg_statio_all_tables One row for each table in the current database, showing statistics about I/O on that specific table. See pg_statio_all_tables for details.
pg_statio_sys_tablesSame as pg_statio_all_tables, except that only system tables are shown.
pg_statio_user_tablesSame as pg_statio_all_tables, except that only user tables are shown.
pg_statio_all_indexes One row for each index in the current database, showing statistics about I/O on that specific index. See pg_statio_all_indexes for details.
pg_statio_sys_indexesSame as pg_statio_all_indexes, except that only indexes on system tables are shown.
pg_statio_user_indexesSame as pg_statio_all_indexes, except that only indexes on user tables are shown.
pg_statio_all_sequences One row for each sequence in the current database, showing statistics about I/O on that specific sequence. See pg_statio_all_sequences for details.
pg_statio_sys_sequencesSame as pg_statio_all_sequences, except that only system sequences are shown. (Presently, no system sequences are defined, so this view is always empty.)
pg_statio_user_sequencesSame as pg_statio_all_sequences, except that only user sequences are shown.
pg_stat_user_functions One row for each tracked function, showing statistics about executions of that function. See pg_stat_user_functions for details.
pg_stat_xact_user_functionsSimilar to pg_stat_user_functions, but counts only calls during the current transaction (which are not yet included in pg_stat_user_functions).
pg_stat_slruOne row per SLRU, showing statistics of operations. See pg_stat_slru for details.
pg_stat_replication_slotsOne row per replication slot, showing statistics about the replication slot's usage. See pg_stat_replication_slots for details.
pg_stat_subscription_statsOne row per subscription, showing statistics about errors. See pg_stat_subscription_stats for details.

The per-index statistics are particularly useful to determine which indexes are being used and how effective they are.

The pg_statio_ views are primarily useful to determine the effectiveness of the buffer cache. When the number of actual disk reads is much smaller than the number of buffer hits, then the cache is satisfying most read requests without invoking a kernel call. However, these statistics do not give the entire story: due to the way in which PostgreSQL handles disk I/O, data that is not in the PostgreSQL buffer cache might still reside in the kernel's I/O cache, and might therefore still be fetched without requiring a physical read. Users interested in obtaining more detailed information on PostgreSQL I/O behavior are advised to use the PostgreSQL statistics views in combination with operating system utilities that allow insight into the kernel's handling of I/O.

28.2.3. pg_stat_activity

The pg_stat_activity view will have one row per server process, showing information related to the current activity of that process.

Table 28.3. pg_stat_activity View

Column Type

Description

datid oid

OID of the database this backend is connected to

datname name

Name of the database this backend is connected to

pid integer

Process ID of this backend

leader_pid integer

Process ID of the parallel group leader, if this process is a parallel query worker. NULL if this process is a parallel group leader or does not participate in parallel query.

usesysid oid

OID of the user logged into this backend

usename name

Name of the user logged into this backend

application_name text

Name of the application that is connected to this backend

client_addr inet

IP address of the client connected to this backend. If this field is null, it indicates either that the client is connected via a Unix socket on the server machine or that this is an internal process such as autovacuum.

client_hostname text

Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This field will only be non-null for IP connections, and only when log_hostname is enabled.

client_port integer

TCP port number that the client is using for communication with this backend, or -1 if a Unix socket is used. If this field is null, it indicates that this is an internal server process.

backend_start timestamp with time zone

Time when this process was started. For client backends, this is the time the client connected to the server.

xact_start timestamp with time zone

Time when this process' current transaction was started, or null if no transaction is active. If the current query is the first of its transaction, this column is equal to the query_start column.

query_start timestamp with time zone

Time when the currently active query was started, or if state is not active, when the last query was started

state_change timestamp with time zone

Time when the state was last changed

wait_event_type text

The type of event for which the backend is waiting, if any; otherwise NULL. See Table 28.4.

wait_event text

Wait event name if backend is currently waiting, otherwise NULL. See Table 28.5 through Table 28.13.

state text

Current overall state of this backend. Possible values are:

  • active: The backend is executing a query.

  • idle: The backend is waiting for a new client command.

  • idle in transaction: The backend is in a transaction, but is not currently executing a query.

  • idle in transaction (aborted): This state is similar to idle in transaction, except one of the statements in the transaction caused an error.

  • fastpath function call: The backend is executing a fast-path function.

  • disabled: This state is reported if track_activities is disabled in this backend.

backend_xid xid

Top-level transaction identifier of this backend, if any.

backend_xmin xid

The current backend's xmin horizon.

query_id bigint

Identifier of this backend's most recent query. If state is active this field shows the identifier of the currently executing query. In all other states, it shows the identifier of last query that was executed. Query identifiers are not computed by default so this field will be null unless compute_query_id parameter is enabled or a third-party module that computes query identifiers is configured.

query text

Text of this backend's most recent query. If state is active this field shows the currently executing query. In all other states, it shows the last query that was executed. By default the query text is truncated at 1024 bytes; this value can be changed via the parameter track_activity_query_size.

backend_type text

Type of current backend. Possible types are autovacuum launcher, autovacuum worker, logical replication launcher, logical replication worker, parallel worker, background writer, client backend, checkpointer, archiver, startup, walreceiver, walsender and walwriter. In addition, background workers registered by extensions may have additional types.


Note

The wait_event and state columns are independent. If a backend is in the active state, it may or may not be waiting on some event. If the state is active and wait_event is non-null, it means that a query is being executed, but is being blocked somewhere in the system.

Table 28.4. Wait Event Types

Wait Event TypeDescription
ActivityThe server process is idle. This event type indicates a process waiting for activity in its main processing loop. wait_event will identify the specific wait point; see Table 28.5.
BufferPinThe server process is waiting for exclusive access to a data buffer. Buffer pin waits can be protracted if another process holds an open cursor that last read data from the buffer in question. See Table 28.6.
ClientThe server process is waiting for activity on a socket connected to a user application. Thus, the server expects something to happen that is independent of its internal processes. wait_event will identify the specific wait point; see Table 28.7.
ExtensionThe server process is waiting for some condition defined by an extension module. See Table 28.8.
IOThe server process is waiting for an I/O operation to complete. wait_event will identify the specific wait point; see Table 28.9.
IPCThe server process is waiting for some interaction with another server process. wait_event will identify the specific wait point; see Table 28.10.
LockThe server process is waiting for a heavyweight lock. Heavyweight locks, also known as lock manager locks or simply locks, primarily protect SQL-visible objects such as tables. However, they are also used to ensure mutual exclusion for certain internal operations such as relation extension. wait_event will identify the type of lock awaited; see Table 28.11.
LWLock The server process is waiting for a lightweight lock. Most such locks protect a particular data structure in shared memory. wait_event will contain a name identifying the purpose of the lightweight lock. (Some locks have specific names; others are part of a group of locks each with a similar purpose.) See Table 28.12.
TimeoutThe server process is waiting for a timeout to expire. wait_event will identify the specific wait point; see Table 28.13.

Table 28.5. Wait Events of Type Activity

Activity Wait EventDescription
ArchiverMainWaiting in main loop of archiver process.
AutoVacuumMainWaiting in main loop of autovacuum launcher process.
BgWriterHibernateWaiting in background writer process, hibernating.
BgWriterMainWaiting in main loop of background writer process.
CheckpointerMainWaiting in main loop of checkpointer process.
LogicalApplyMainWaiting in main loop of logical replication apply process.
LogicalLauncherMainWaiting in main loop of logical replication launcher process.
RecoveryWalStreamWaiting in main loop of startup process for WAL to arrive, during streaming recovery.
SysLoggerMainWaiting in main loop of syslogger process.
WalReceiverMainWaiting in main loop of WAL receiver process.
WalSenderMainWaiting in main loop of WAL sender process.
WalWriterMainWaiting in main loop of WAL writer process.

Table 28.6. Wait Events of Type BufferPin

BufferPin Wait EventDescription
BufferPinWaiting to acquire an exclusive pin on a buffer.

Table 28.7. Wait Events of Type Client

Client Wait EventDescription
ClientReadWaiting to read data from the client.
ClientWriteWaiting to write data to the client.
GSSOpenServerWaiting to read data from the client while establishing a GSSAPI session.
LibPQWalReceiverConnectWaiting in WAL receiver to establish connection to remote server.
LibPQWalReceiverReceiveWaiting in WAL receiver to receive data from remote server.
SSLOpenServerWaiting for SSL while attempting connection.
WalSenderWaitForWALWaiting for WAL to be flushed in WAL sender process.
WalSenderWriteDataWaiting for any activity when processing replies from WAL receiver in WAL sender process.

Table 28.8. Wait Events of Type Extension

Extension Wait EventDescription
ExtensionWaiting in an extension.

Table 28.9. Wait Events of Type IO

IO Wait EventDescription
BaseBackupReadWaiting for base backup to read from a file.
BaseBackupSyncWaiting for data written by a base backup to reach durable storage.
BaseBackupWriteWaiting for base backup to write to a file.
BufFileReadWaiting for a read from a buffered file.
BufFileWriteWaiting for a write to a buffered file.
BufFileTruncateWaiting for a buffered file to be truncated.
ControlFileReadWaiting for a read from the pg_control file.
ControlFileSyncWaiting for the pg_control file to reach durable storage.
ControlFileSyncUpdateWaiting for an update to the pg_control file to reach durable storage.
ControlFileWriteWaiting for a write to the pg_control file.
ControlFileWriteUpdateWaiting for a write to update the pg_control file.
CopyFileReadWaiting for a read during a file copy operation.
CopyFileWriteWaiting for a write during a file copy operation.
DSMFillZeroWriteWaiting to fill a dynamic shared memory backing file with zeroes.
DataFileExtendWaiting for a relation data file to be extended.
DataFileFlushWaiting for a relation data file to reach durable storage.
DataFileImmediateSyncWaiting for an immediate synchronization of a relation data file to durable storage.
DataFilePrefetchWaiting for an asynchronous prefetch from a relation data file.
DataFileReadWaiting for a read from a relation data file.
DataFileSyncWaiting for changes to a relation data file to reach durable storage.
DataFileTruncateWaiting for a relation data file to be truncated.
DataFileWriteWaiting for a write to a relation data file.
LockFileAddToDataDirReadWaiting for a read while adding a line to the data directory lock file.
LockFileAddToDataDirSyncWaiting for data to reach durable storage while adding a line to the data directory lock file.
LockFileAddToDataDirWriteWaiting for a write while adding a line to the data directory lock file.
LockFileCreateReadWaiting to read while creating the data directory lock file.
LockFileCreateSyncWaiting for data to reach durable storage while creating the data directory lock file.
LockFileCreateWriteWaiting for a write while creating the data directory lock file.
LockFileReCheckDataDirReadWaiting for a read during recheck of the data directory lock file.
LogicalRewriteCheckpointSyncWaiting for logical rewrite mappings to reach durable storage during a checkpoint.
LogicalRewriteMappingSyncWaiting for mapping data to reach durable storage during a logical rewrite.
LogicalRewriteMappingWriteWaiting for a write of mapping data during a logical rewrite.
LogicalRewriteSyncWaiting for logical rewrite mappings to reach durable storage.
LogicalRewriteTruncateWaiting for truncate of mapping data during a logical rewrite.
LogicalRewriteWriteWaiting for a write of logical rewrite mappings.
RelationMapReadWaiting for a read of the relation map file.
RelationMapSyncWaiting for the relation map file to reach durable storage.
RelationMapWriteWaiting for a write to the relation map file.
ReorderBufferReadWaiting for a read during reorder buffer management.
ReorderBufferWriteWaiting for a write during reorder buffer management.
ReorderLogicalMappingReadWaiting for a read of a logical mapping during reorder buffer management.
ReplicationSlotReadWaiting for a read from a replication slot control file.
ReplicationSlotRestoreSyncWaiting for a replication slot control file to reach durable storage while restoring it to memory.
ReplicationSlotSyncWaiting for a replication slot control file to reach durable storage.
ReplicationSlotWriteWaiting for a write to a replication slot control file.
SLRUFlushSyncWaiting for SLRU data to reach durable storage during a checkpoint or database shutdown.
SLRUReadWaiting for a read of an SLRU page.
SLRUSyncWaiting for SLRU data to reach durable storage following a page write.
SLRUWriteWaiting for a write of an SLRU page.
SnapbuildReadWaiting for a read of a serialized historical catalog snapshot.
SnapbuildSyncWaiting for a serialized historical catalog snapshot to reach durable storage.
SnapbuildWriteWaiting for a write of a serialized historical catalog snapshot.
TimelineHistoryFileSyncWaiting for a timeline history file received via streaming replication to reach durable storage.
TimelineHistoryFileWriteWaiting for a write of a timeline history file received via streaming replication.
TimelineHistoryReadWaiting for a read of a timeline history file.
TimelineHistorySyncWaiting for a newly created timeline history file to reach durable storage.
TimelineHistoryWriteWaiting for a write of a newly created timeline history file.
TwophaseFileReadWaiting for a read of a two phase state file.
TwophaseFileSyncWaiting for a two phase state file to reach durable storage.
TwophaseFileWriteWaiting for a write of a two phase state file.
VersionFileSyncWaiting for the version file to reach durable storage while creating a database.
VersionFileWriteWaiting for the version file to be written while creating a database.
WALBootstrapSyncWaiting for WAL to reach durable storage during bootstrapping.
WALBootstrapWriteWaiting for a write of a WAL page during bootstrapping.
WALCopyReadWaiting for a read when creating a new WAL segment by copying an existing one.
WALCopySyncWaiting for a new WAL segment created by copying an existing one to reach durable storage.
WALCopyWriteWaiting for a write when creating a new WAL segment by copying an existing one.
WALInitSyncWaiting for a newly initialized WAL file to reach durable storage.
WALInitWriteWaiting for a write while initializing a new WAL file.
WALReadWaiting for a read from a WAL file.
WALSenderTimelineHistoryReadWaiting for a read from a timeline history file during a walsender timeline command.
WALSyncWaiting for a WAL file to reach durable storage.
WALSyncMethodAssignWaiting for data to reach durable storage while assigning a new WAL sync method.
WALWriteWaiting for a write to a WAL file.

Table 28.10. Wait Events of Type IPC

IPC Wait EventDescription
AppendReadyWaiting for subplan nodes of an Append plan node to be ready.
ArchiveCleanupCommandWaiting for archive_cleanup_command to complete.
ArchiveCommandWaiting for archive_command to complete.
BackendTerminationWaiting for the termination of another backend.
BackupWaitWalArchiveWaiting for WAL files required for a backup to be successfully archived.
BgWorkerShutdownWaiting for background worker to shut down.
BgWorkerStartupWaiting for background worker to start up.
BtreePageWaiting for the page number needed to continue a parallel B-tree scan to become available.
BufferIOWaiting for buffer I/O to complete.
CheckpointDoneWaiting for a checkpoint to complete.
CheckpointStartWaiting for a checkpoint to start.
ExecuteGatherWaiting for activity from a child process while executing a Gather plan node.
HashBatchAllocateWaiting for an elected Parallel Hash participant to allocate a hash table.
HashBatchElectWaiting to elect a Parallel Hash participant to allocate a hash table.
HashBatchLoadWaiting for other Parallel Hash participants to finish loading a hash table.
HashBuildAllocateWaiting for an elected Parallel Hash participant to allocate the initial hash table.
HashBuildElectWaiting to elect a Parallel Hash participant to allocate the initial hash table.
HashBuildHashInnerWaiting for other Parallel Hash participants to finish hashing the inner relation.
HashBuildHashOuterWaiting for other Parallel Hash participants to finish partitioning the outer relation.
HashGrowBatchesAllocateWaiting for an elected Parallel Hash participant to allocate more batches.
HashGrowBatchesDecideWaiting to elect a Parallel Hash participant to decide on future batch growth.
HashGrowBatchesElectWaiting to elect a Parallel Hash participant to allocate more batches.
HashGrowBatchesFinishWaiting for an elected Parallel Hash participant to decide on future batch growth.
HashGrowBatchesRepartitionWaiting for other Parallel Hash participants to finish repartitioning.
HashGrowBucketsAllocateWaiting for an elected Parallel Hash participant to finish allocating more buckets.
HashGrowBucketsElectWaiting to elect a Parallel Hash participant to allocate more buckets.
HashGrowBucketsReinsertWaiting for other Parallel Hash participants to finish inserting tuples into new buckets.
LogicalSyncDataWaiting for a logical replication remote server to send data for initial table synchronization.
LogicalSyncStateChangeWaiting for a logical replication remote server to change state.
MessageQueueInternalWaiting for another process to be attached to a shared message queue.
MessageQueuePutMessageWaiting to write a protocol message to a shared message queue.
MessageQueueReceiveWaiting to receive bytes from a shared message queue.
MessageQueueSendWaiting to send bytes to a shared message queue.
ParallelBitmapScanWaiting for parallel bitmap scan to become initialized.
ParallelCreateIndexScanWaiting for parallel CREATE INDEX workers to finish heap scan.
ParallelFinishWaiting for parallel workers to finish computing.
ProcArrayGroupUpdateWaiting for the group leader to clear the transaction ID at end of a parallel operation.
ProcSignalBarrierWaiting for a barrier event to be processed by all backends.
PromoteWaiting for standby promotion.
RecoveryConflictSnapshotWaiting for recovery conflict resolution for a vacuum cleanup.
RecoveryConflictTablespaceWaiting for recovery conflict resolution for dropping a tablespace.
RecoveryEndCommandWaiting for recovery_end_command to complete.
RecoveryPauseWaiting for recovery to be resumed.
ReplicationOriginDropWaiting for a replication origin to become inactive so it can be dropped.
ReplicationSlotDropWaiting for a replication slot to become inactive so it can be dropped.
RestoreCommandWaiting for restore_command to complete.
SafeSnapshotWaiting to obtain a valid snapshot for a READ ONLY DEFERRABLE transaction.
SyncRepWaiting for confirmation from a remote server during synchronous replication.
WalReceiverExitWaiting for the WAL receiver to exit.
WalReceiverWaitStartWaiting for startup process to send initial data for streaming replication.
XactGroupUpdateWaiting for the group leader to update transaction status at end of a parallel operation.

Table 28.11. Wait Events of Type Lock

Lock Wait EventDescription
advisoryWaiting to acquire an advisory user lock.
extendWaiting to extend a relation.
frozenidWaiting to update pg_database.datfrozenxid and pg_database.datminmxid.
objectWaiting to acquire a lock on a non-relation database object.
pageWaiting to acquire a lock on a page of a relation.
relationWaiting to acquire a lock on a relation.
spectokenWaiting to acquire a speculative insertion lock.
transactionidWaiting for a transaction to finish.
tupleWaiting to acquire a lock on a tuple.
userlockWaiting to acquire a user lock.
virtualxidWaiting to acquire a virtual transaction ID lock.

Table 28.12. Wait Events of Type LWLock

LWLock Wait EventDescription
AddinShmemInitWaiting to manage an extension's space allocation in shared memory.
AutoFileWaiting to update the postgresql.auto.conf file.
AutovacuumWaiting to read or update the current state of autovacuum workers.
AutovacuumScheduleWaiting to ensure that a table selected for autovacuum still needs vacuuming.
BackgroundWorkerWaiting to read or update background worker state.
BtreeVacuumWaiting to read or update vacuum-related information for a B-tree index.
BufferContentWaiting to access a data page in memory.
BufferMappingWaiting to associate a data block with a buffer in the buffer pool.
CheckpointerCommWaiting to manage fsync requests.
CommitTsWaiting to read or update the last value set for a transaction commit timestamp.
CommitTsBufferWaiting for I/O on a commit timestamp SLRU buffer.
CommitTsSLRUWaiting to access the commit timestamp SLRU cache.
ControlFileWaiting to read or update the pg_control file or create a new WAL file.
DynamicSharedMemoryControlWaiting to read or update dynamic shared memory allocation information.
LockFastPathWaiting to read or update a process' fast-path lock information.
LockManagerWaiting to read or update information about heavyweight locks.
LogicalRepWorkerWaiting to read or update the state of logical replication workers.
MultiXactGenWaiting to read or update shared multixact state.
MultiXactMemberBufferWaiting for I/O on a multixact member SLRU buffer.
MultiXactMemberSLRUWaiting to access the multixact member SLRU cache.
MultiXactOffsetBufferWaiting for I/O on a multixact offset SLRU buffer.
MultiXactOffsetSLRUWaiting to access the multixact offset SLRU cache.
MultiXactTruncationWaiting to read or truncate multixact information.
NotifyBufferWaiting for I/O on a NOTIFY message SLRU buffer.
NotifyQueueWaiting to read or update NOTIFY messages.
NotifyQueueTailWaiting to update limit on NOTIFY message storage.
NotifySLRUWaiting to access the NOTIFY message SLRU cache.
OidGenWaiting to allocate a new OID.
OldSnapshotTimeMapWaiting to read or update old snapshot control information.
ParallelAppendWaiting to choose the next subplan during Parallel Append plan execution.
ParallelHashJoinWaiting to synchronize workers during Parallel Hash Join plan execution.
ParallelQueryDSAWaiting for parallel query dynamic shared memory allocation.
PerSessionDSAWaiting for parallel query dynamic shared memory allocation.
PerSessionRecordTypeWaiting to access a parallel query's information about composite types.
PerSessionRecordTypmodWaiting to access a parallel query's information about type modifiers that identify anonymous record types.
PerXactPredicateListWaiting to access the list of predicate locks held by the current serializable transaction during a parallel query.
PredicateLockManagerWaiting to access predicate lock information used by serializable transactions.
ProcArrayWaiting to access the shared per-process data structures (typically, to get a snapshot or report a session's transaction ID).
RelationMappingWaiting to read or update a pg_filenode.map file (used to track the filenode assignments of certain system catalogs).
RelCacheInitWaiting to read or update a pg_internal.init relation cache initialization file.
ReplicationOriginWaiting to create, drop or use a replication origin.
ReplicationOriginStateWaiting to read or update the progress of one replication origin.
ReplicationSlotAllocationWaiting to allocate or free a replication slot.
ReplicationSlotControlWaiting to read or update replication slot state.
ReplicationSlotIOWaiting for I/O on a replication slot.
SerialBufferWaiting for I/O on a serializable transaction conflict SLRU buffer.
SerializableFinishedListWaiting to access the list of finished serializable transactions.
SerializablePredicateListWaiting to access the list of predicate locks held by serializable transactions.
PgStatsDSAWaiting for stats dynamic shared memory allocator access
PgStatsHashWaiting for stats shared memory hash table access
PgStatsDataWaiting for shared memory stats data access
SerializableXactHashWaiting to read or update information about serializable transactions.
SerialSLRUWaiting to access the serializable transaction conflict SLRU cache.
SharedTidBitmapWaiting to access a shared TID bitmap during a parallel bitmap index scan.
SharedTupleStoreWaiting to access a shared tuple store during parallel query.
ShmemIndexWaiting to find or allocate space in shared memory.
SInvalReadWaiting to retrieve messages from the shared catalog invalidation queue.
SInvalWriteWaiting to add a message to the shared catalog invalidation queue.
SubtransBufferWaiting for I/O on a sub-transaction SLRU buffer.
SubtransSLRUWaiting to access the sub-transaction SLRU cache.
SyncRepWaiting to read or update information about the state of synchronous replication.
SyncScanWaiting to select the starting location of a synchronized table scan.
TablespaceCreateWaiting to create or drop a tablespace.
TwoPhaseStateWaiting to read or update the state of prepared transactions.
WALBufMappingWaiting to replace a page in WAL buffers.
WALInsertWaiting to insert WAL data into a memory buffer.
WALWriteWaiting for WAL buffers to be written to disk.
WrapLimitsVacuumWaiting to update limits on transaction id and multixact consumption.
XactBufferWaiting for I/O on a transaction status SLRU buffer.
XactSLRUWaiting to access the transaction status SLRU cache.
XactTruncationWaiting to execute pg_xact_status or update the oldest transaction ID available to it.
XidGenWaiting to allocate a new transaction ID.

Note

Extensions can add LWLock types to the list shown in Table 28.12. In some cases, the name assigned by an extension will not be available in all server processes; so an LWLock wait event might be reported as just extension rather than the extension-assigned name.

Table 28.13. Wait Events of Type Timeout

Timeout Wait EventDescription
BaseBackupThrottleWaiting during base backup when throttling activity.
CheckpointWriteDelayWaiting between writes while performing a checkpoint.
PgSleepWaiting due to a call to pg_sleep or a sibling function.
RecoveryApplyDelayWaiting to apply WAL during recovery because of a delay setting.
RecoveryRetrieveRetryIntervalWaiting during recovery when WAL data is not available from any source (pg_wal, archive or stream).
RegisterSyncRequestWaiting while sending synchronization requests to the checkpointer, because the request queue is full.
VacuumDelayWaiting in a cost-based vacuum delay point.
VacuumTruncateWaiting to acquire an exclusive lock to truncate off any empty pages at the end of a table vacuumed.

Here is an example of how wait events can be viewed:

SELECT pid, wait_event_type, wait_event FROM pg_stat_activity WHERE wait_event is NOT NULL;
 pid  | wait_event_type | wait_event
------+-----------------+------------
 2540 | Lock            | relation
 6644 | LWLock          | ProcArray
(2 rows)

28.2.4. pg_stat_replication

The pg_stat_replication view will contain one row per WAL sender process, showing statistics about replication to that sender's connected standby server. Only directly connected standbys are listed; no information is available about downstream standby servers.

Table 28.14. pg_stat_replication View

Column Type

Description

pid integer

Process ID of a WAL sender process

usesysid oid

OID of the user logged into this WAL sender process

usename name

Name of the user logged into this WAL sender process

application_name text

Name of the application that is connected to this WAL sender

client_addr inet

IP address of the client connected to this WAL sender. If this field is null, it indicates that the client is connected via a Unix socket on the server machine.

client_hostname text

Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This field will only be non-null for IP connections, and only when log_hostname is enabled.

client_port integer

TCP port number that the client is using for communication with this WAL sender, or -1 if a Unix socket is used

backend_start timestamp with time zone

Time when this process was started, i.e., when the client connected to this WAL sender

backend_xmin xid

This standby's xmin horizon reported by hot_standby_feedback.

state text

Current WAL sender state. Possible values are:

  • startup: This WAL sender is starting up.

  • catchup: This WAL sender's connected standby is catching up with the primary.

  • streaming: This WAL sender is streaming changes after its connected standby server has caught up with the primary.

  • backup: This WAL sender is sending a backup.

  • stopping: This WAL sender is stopping.

sent_lsn pg_lsn

Last write-ahead log location sent on this connection

write_lsn pg_lsn

Last write-ahead log location written to disk by this standby server

flush_lsn pg_lsn

Last write-ahead log location flushed to disk by this standby server

replay_lsn pg_lsn

Last write-ahead log location replayed into the database on this standby server

write_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written it (but not yet flushed it or applied it). This can be used to gauge the delay that synchronous_commit level remote_write incurred while committing if this server was configured as a synchronous standby.

flush_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written and flushed it (but not yet applied it). This can be used to gauge the delay that synchronous_commit level on incurred while committing if this server was configured as a synchronous standby.

replay_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written, flushed and applied it. This can be used to gauge the delay that synchronous_commit level remote_apply incurred while committing if this server was configured as a synchronous standby.

sync_priority integer

Priority of this standby server for being chosen as the synchronous standby in a priority-based synchronous replication. This has no effect in a quorum-based synchronous replication.

sync_state text

Synchronous state of this standby server. Possible values are:

  • async: This standby server is asynchronous.

  • potential: This standby server is now asynchronous, but can potentially become synchronous if one of current synchronous ones fails.

  • sync: This standby server is synchronous.

  • quorum: This standby server is considered as a candidate for quorum standbys.

reply_time timestamp with time zone

Send time of last reply message received from standby server


The lag times reported in the pg_stat_replication view are measurements of the time taken for recent WAL to be written, flushed and replayed and for the sender to know about it. These times represent the commit delay that was (or would have been) introduced by each synchronous commit level, if the remote server was configured as a synchronous standby. For an asynchronous standby, the replay_lag column approximates the delay before recent transactions became visible to queries. If the standby server has entirely caught up with the sending server and there is no more WAL activity, the most recently measured lag times will continue to be displayed for a short time and then show NULL.

Lag times work automatically for physical replication. Logical decoding plugins may optionally emit tracking messages; if they do not, the tracking mechanism will simply display NULL lag.

Note

The reported lag times are not predictions of how long it will take for the standby to catch up with the sending server assuming the current rate of replay. Such a system would show similar times while new WAL is being generated, but would differ when the sender becomes idle. In particular, when the standby has caught up completely, pg_stat_replication shows the time taken to write, flush and replay the most recent reported WAL location rather than zero as some users might expect. This is consistent with the goal of measuring synchronous commit and transaction visibility delays for recent write transactions. To reduce confusion for users expecting a different model of lag, the lag columns revert to NULL after a short time on a fully replayed idle system. Monitoring systems should choose whether to represent this as missing data, zero or continue to display the last known value.

28.2.5. pg_stat_replication_slots

The pg_stat_replication_slots view will contain one row per logical replication slot, showing statistics about its usage.

Table 28.15. pg_stat_replication_slots View

Column Type

Description

slot_name text

A unique, cluster-wide identifier for the replication slot

spill_txns bigint

Number of transactions spilled to disk once the memory used by logical decoding to decode changes from WAL has exceeded logical_decoding_work_mem. The counter gets incremented for both top-level transactions and subtransactions.

spill_count bigint

Number of times transactions were spilled to disk while decoding changes from WAL for this slot. This counter is incremented each time a transaction is spilled, and the same transaction may be spilled multiple times.

spill_bytes bigint

Amount of decoded transaction data spilled to disk while performing decoding of changes from WAL for this slot. This and other spill counters can be used to gauge the I/O which occurred during logical decoding and allow tuning logical_decoding_work_mem.

stream_txns bigint

Number of in-progress transactions streamed to the decoding output plugin after the memory used by logical decoding to decode changes from WAL for this slot has exceeded logical_decoding_work_mem. Streaming only works with top-level transactions (subtransactions can't be streamed independently), so the counter is not incremented for subtransactions.

stream_countbigint

Number of times in-progress transactions were streamed to the decoding output plugin while decoding changes from WAL for this slot. This counter is incremented each time a transaction is streamed, and the same transaction may be streamed multiple times.

stream_bytesbigint

Amount of transaction data decoded for streaming in-progress transactions to the decoding output plugin while decoding changes from WAL for this slot. This and other streaming counters for this slot can be used to tune logical_decoding_work_mem.

total_txns bigint

Number of decoded transactions sent to the decoding output plugin for this slot. This counts top-level transactions only, and is not incremented for subtransactions. Note that this includes the transactions that are streamed and/or spilled.

total_bytesbigint

Amount of transaction data decoded for sending transactions to the decoding output plugin while decoding changes from WAL for this slot. Note that this includes data that is streamed and/or spilled.

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.6. pg_stat_wal_receiver

The pg_stat_wal_receiver view will contain only one row, showing statistics about the WAL receiver from that receiver's connected server.

Table 28.16. pg_stat_wal_receiver View

Column Type

Description

pid integer

Process ID of the WAL receiver process

status text

Activity status of the WAL receiver process

receive_start_lsn pg_lsn

First write-ahead log location used when WAL receiver is started

receive_start_tli integer

First timeline number used when WAL receiver is started

written_lsn pg_lsn

Last write-ahead log location already received and written to disk, but not flushed. This should not be used for data integrity checks.

flushed_lsn pg_lsn

Last write-ahead log location already received and flushed to disk, the initial value of this field being the first log location used when WAL receiver is started

received_tli integer

Timeline number of last write-ahead log location received and flushed to disk, the initial value of this field being the timeline number of the first log location used when WAL receiver is started

last_msg_send_time timestamp with time zone

Send time of last message received from origin WAL sender

last_msg_receipt_time timestamp with time zone

Receipt time of last message received from origin WAL sender

latest_end_lsn pg_lsn

Last write-ahead log location reported to origin WAL sender

latest_end_time timestamp with time zone

Time of last write-ahead log location reported to origin WAL sender

slot_name text

Replication slot name used by this WAL receiver

sender_host text

Host of the PostgreSQL instance this WAL receiver is connected to. This can be a host name, an IP address, or a directory path if the connection is via Unix socket. (The path case can be distinguished because it will always be an absolute path, beginning with /.)

sender_port integer

Port number of the PostgreSQL instance this WAL receiver is connected to.

conninfo text

Connection string used by this WAL receiver, with security-sensitive fields obfuscated.


28.2.7. pg_stat_recovery_prefetch

The pg_stat_recovery_prefetch view will contain only one row. The columns wal_distance, block_distance and io_depth show current values, and the other columns show cumulative counters that can be reset with the pg_stat_reset_shared function.

Table 28.17. pg_stat_recovery_prefetch View

Column Type

Description

stats_reset timestamp with time zone

Time at which these statistics were last reset

prefetch bigint

Number of blocks prefetched because they were not in the buffer pool

hit bigint

Number of blocks not prefetched because they were already in the buffer pool

skip_init bigint

Number of blocks not prefetched because they would be zero-initialized

skip_new bigint

Number of blocks not prefetched because they didn't exist yet

skip_fpw bigint

Number of blocks not prefetched because a full page image was included in the WAL

skip_rep bigint

Number of blocks not prefetched because they were already recently prefetched

wal_distance int

How many bytes ahead the prefetcher is looking

block_distance int

How many blocks ahead the prefetcher is looking

io_depth int

How many prefetches have been initiated but are not yet known to have completed


28.2.8. pg_stat_subscription

Table 28.18. pg_stat_subscription View

Column Type

Description

subid oid

OID of the subscription

subname name

Name of the subscription

pid integer

Process ID of the subscription worker process

relid oid

OID of the relation that the worker is synchronizing; null for the main apply worker

received_lsn pg_lsn

Last write-ahead log location received, the initial value of this field being 0

last_msg_send_time timestamp with time zone

Send time of last message received from origin WAL sender

last_msg_receipt_time timestamp with time zone

Receipt time of last message received from origin WAL sender

latest_end_lsn pg_lsn

Last write-ahead log location reported to origin WAL sender

latest_end_time timestamp with time zone

Time of last write-ahead log location reported to origin WAL sender


28.2.9. pg_stat_subscription_stats

The pg_stat_subscription_stats view will contain one row per subscription.

Table 28.19. pg_stat_subscription_stats View

Column Type

Description

subid oid

OID of the subscription

subname name

Name of the subscription

apply_error_count bigint

Number of times an error occurred while applying changes

sync_error_count bigint

Number of times an error occurred during the initial table synchronization

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.10. pg_stat_ssl

The pg_stat_ssl view will contain one row per backend or WAL sender process, showing statistics about SSL usage on this connection. It can be joined to pg_stat_activity or pg_stat_replication on the pid column to get more details about the connection.

Table 28.20. pg_stat_ssl View

Column Type

Description

pid integer

Process ID of a backend or WAL sender process

ssl boolean

True if SSL is used on this connection

version text

Version of SSL in use, or NULL if SSL is not in use on this connection

cipher text

Name of SSL cipher in use, or NULL if SSL is not in use on this connection

bits integer

Number of bits in the encryption algorithm used, or NULL if SSL is not used on this connection

client_dn text

Distinguished Name (DN) field from the client certificate used, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated if the DN field is longer than NAMEDATALEN (64 characters in a standard build).

client_serial numeric

Serial number of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. The combination of certificate serial number and certificate issuer uniquely identifies a certificate (unless the issuer erroneously reuses serial numbers).

issuer_dn text

DN of the issuer of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated like client_dn.


28.2.11. pg_stat_gssapi

The pg_stat_gssapi view will contain one row per backend, showing information about GSSAPI usage on this connection. It can be joined to pg_stat_activity or pg_stat_replication on the pid column to get more details about the connection.

Table 28.21. pg_stat_gssapi View

Column Type

Description

pid integer

Process ID of a backend

gss_authenticated boolean

True if GSSAPI authentication was used for this connection

principal text

Principal used to authenticate this connection, or NULL if GSSAPI was not used to authenticate this connection. This field is truncated if the principal is longer than NAMEDATALEN (64 characters in a standard build).

encrypted boolean

True if GSSAPI encryption is in use on this connection


28.2.12. pg_stat_archiver

The pg_stat_archiver view will always have a single row, containing data about the archiver process of the cluster.

Table 28.22. pg_stat_archiver View

Column Type

Description

archived_count bigint

Number of WAL files that have been successfully archived

last_archived_wal text

Name of the WAL file most recently successfully archived

last_archived_time timestamp with time zone

Time of the most recent successful archive operation

failed_count bigint

Number of failed attempts for archiving WAL files

last_failed_wal text

Name of the WAL file of the most recent failed archival operation

last_failed_time timestamp with time zone

Time of the most recent failed archival operation

stats_reset timestamp with time zone

Time at which these statistics were last reset


Normally, WAL files are archived in order, oldest to newest, but that is not guaranteed, and does not hold under special circumstances like when promoting a standby or after crash recovery. Therefore it is not safe to assume that all files older than last_archived_wal have also been successfully archived.

28.2.13. pg_stat_bgwriter

The pg_stat_bgwriter view will always have a single row, containing global data for the cluster.

Table 28.23. pg_stat_bgwriter View

Column Type

Description

checkpoints_timed bigint

Number of scheduled checkpoints that have been performed

checkpoints_req bigint

Number of requested checkpoints that have been performed

checkpoint_write_time double precision

Total amount of time that has been spent in the portion of checkpoint processing where files are written to disk, in milliseconds

checkpoint_sync_time double precision

Total amount of time that has been spent in the portion of checkpoint processing where files are synchronized to disk, in milliseconds

buffers_checkpoint bigint

Number of buffers written during checkpoints

buffers_clean bigint

Number of buffers written by the background writer

maxwritten_clean bigint

Number of times the background writer stopped a cleaning scan because it had written too many buffers

buffers_backend bigint

Number of buffers written directly by a backend

buffers_backend_fsync bigint

Number of times a backend had to execute its own fsync call (normally the background writer handles those even when the backend does its own write)

buffers_alloc bigint

Number of buffers allocated

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.14. pg_stat_wal

The pg_stat_wal view will always have a single row, containing data about WAL activity of the cluster.

Table 28.24. pg_stat_wal View

Column Type

Description

wal_records bigint

Total number of WAL records generated

wal_fpi bigint

Total number of WAL full page images generated

wal_bytes numeric

Total amount of WAL generated in bytes

wal_buffers_full bigint

Number of times WAL data was written to disk because WAL buffers became full

wal_write bigint

Number of times WAL buffers were written out to disk via XLogWrite request. See Section 30.5 for more information about the internal WAL function XLogWrite.

wal_sync bigint

Number of times WAL files were synced to disk via issue_xlog_fsync request (if fsync is on and wal_sync_method is either fdatasync, fsync or fsync_writethrough, otherwise zero). See Section 30.5 for more information about the internal WAL function issue_xlog_fsync.

wal_write_time double precision

Total amount of time spent writing WAL buffers to disk via XLogWrite request, in milliseconds (if track_wal_io_timing is enabled, otherwise zero). This includes the sync time when wal_sync_method is either open_datasync or open_sync.

wal_sync_time double precision

Total amount of time spent syncing WAL files to disk via issue_xlog_fsync request, in milliseconds (if track_wal_io_timing is enabled, fsync is on, and wal_sync_method is either fdatasync, fsync or fsync_writethrough, otherwise zero).

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.15. pg_stat_database

The pg_stat_database view will contain one row for each database in the cluster, plus one for shared objects, showing database-wide statistics.

Table 28.25. pg_stat_database View

Column Type

Description

datid oid

OID of this database, or 0 for objects belonging to a shared relation

datname name

Name of this database, or NULL for shared objects.

numbackends integer

Number of backends currently connected to this database, or NULL for shared objects. This is the only column in this view that returns a value reflecting current state; all other columns return the accumulated values since the last reset.

xact_commit bigint

Number of transactions in this database that have been committed

xact_rollback bigint

Number of transactions in this database that have been rolled back

blks_read bigint

Number of disk blocks read in this database

blks_hit bigint

Number of times disk blocks were found already in the buffer cache, so that a read was not necessary (this only includes hits in the PostgreSQL buffer cache, not the operating system's file system cache)

tup_returned bigint

Number of live rows fetched by sequential scans and index entries returned by index scans in this database

tup_fetched bigint

Number of live rows fetched by index scans in this database

tup_inserted bigint

Number of rows inserted by queries in this database

tup_updated bigint

Number of rows updated by queries in this database

tup_deleted bigint

Number of rows deleted by queries in this database

conflicts bigint

Number of queries canceled due to conflicts with recovery in this database. (Conflicts occur only on standby servers; see pg_stat_database_conflicts for details.)

temp_files bigint

Number of temporary files created by queries in this database. All temporary files are counted, regardless of why the temporary file was created (e.g., sorting or hashing), and regardless of the log_temp_files setting.

temp_bytes bigint

Total amount of data written to temporary files by queries in this database. All temporary files are counted, regardless of why the temporary file was created, and regardless of the log_temp_files setting.

deadlocks bigint

Number of deadlocks detected in this database

checksum_failures bigint

Number of data page checksum failures detected in this database (or on a shared object), or NULL if data checksums are not enabled.

checksum_last_failure timestamp with time zone

Time at which the last data page checksum failure was detected in this database (or on a shared object), or NULL if data checksums are not enabled.

blk_read_time double precision

Time spent reading data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)

blk_write_time double precision

Time spent writing data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)

session_time double precision

Time spent by database sessions in this database, in milliseconds (note that statistics are only updated when the state of a session changes, so if sessions have been idle for a long time, this idle time won't be included)

active_time double precision

Time spent executing SQL statements in this database, in milliseconds (this corresponds to the states active and fastpath function call in pg_stat_activity)

idle_in_transaction_time double precision

Time spent idling while in a transaction in this database, in milliseconds (this corresponds to the states idle in transaction and idle in transaction (aborted) in pg_stat_activity)

sessions bigint

Total number of sessions established to this database

sessions_abandoned bigint

Number of database sessions to this database that were terminated because connection to the client was lost

sessions_fatal bigint

Number of database sessions to this database that were terminated by fatal errors

sessions_killed bigint

Number of database sessions to this database that were terminated by operator intervention

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.16. pg_stat_database_conflicts

The pg_stat_database_conflicts view will contain one row per database, showing database-wide statistics about query cancels occurring due to conflicts with recovery on standby servers. This view will only contain information on standby servers, since conflicts do not occur on primary servers.

Table 28.26. pg_stat_database_conflicts View

Column Type

Description

datid oid

OID of a database

datname name

Name of this database

confl_tablespace bigint

Number of queries in this database that have been canceled due to dropped tablespaces

confl_lock bigint

Number of queries in this database that have been canceled due to lock timeouts

confl_snapshot bigint

Number of queries in this database that have been canceled due to old snapshots

confl_bufferpin bigint

Number of queries in this database that have been canceled due to pinned buffers

confl_deadlock bigint

Number of queries in this database that have been canceled due to deadlocks


28.2.17. pg_stat_all_tables

The pg_stat_all_tables view will contain one row for each table in the current database (including TOAST tables), showing statistics about accesses to that specific table. The pg_stat_user_tables and pg_stat_sys_tables views contain the same information, but filtered to only show user and system tables respectively.

Table 28.27. pg_stat_all_tables View

Column Type

Description

relid oid

OID of a table

schemaname name

Name of the schema that this table is in

relname name

Name of this table

seq_scan bigint

Number of sequential scans initiated on this table

seq_tup_read bigint

Number of live rows fetched by sequential scans

idx_scan bigint

Number of index scans initiated on this table

idx_tup_fetch bigint

Number of live rows fetched by index scans

n_tup_ins bigint

Number of rows inserted

n_tup_upd bigint

Number of rows updated (includes HOT updated rows)

n_tup_del bigint

Number of rows deleted

n_tup_hot_upd bigint

Number of rows HOT updated (i.e., with no separate index update required)

n_live_tup bigint

Estimated number of live rows

n_dead_tup bigint

Estimated number of dead rows

n_mod_since_analyze bigint

Estimated number of rows modified since this table was last analyzed

n_ins_since_vacuum bigint

Estimated number of rows inserted since this table was last vacuumed

last_vacuum timestamp with time zone

Last time at which this table was manually vacuumed (not counting VACUUM FULL)

last_autovacuum timestamp with time zone

Last time at which this table was vacuumed by the autovacuum daemon

last_analyze timestamp with time zone

Last time at which this table was manually analyzed

last_autoanalyze timestamp with time zone

Last time at which this table was analyzed by the autovacuum daemon

vacuum_count bigint

Number of times this table has been manually vacuumed (not counting VACUUM FULL)

autovacuum_count bigint

Number of times this table has been vacuumed by the autovacuum daemon

analyze_count bigint

Number of times this table has been manually analyzed

autoanalyze_count bigint

Number of times this table has been analyzed by the autovacuum daemon


28.2.18. pg_stat_all_indexes

The pg_stat_all_indexes view will contain one row for each index in the current database, showing statistics about accesses to that specific index. The pg_stat_user_indexes and pg_stat_sys_indexes views contain the same information, but filtered to only show user and system indexes respectively.

Table 28.28. pg_stat_all_indexes View

Column Type

Description

relid oid

OID of the table for this index

indexrelid oid

OID of this index

schemaname name

Name of the schema this index is in

relname name

Name of the table for this index

indexrelname name

Name of this index

idx_scan bigint

Number of index scans initiated on this index

idx_tup_read bigint

Number of index entries returned by scans on this index

idx_tup_fetch bigint

Number of live table rows fetched by simple index scans using this index


Indexes can be used by simple index scans, bitmap index scans, and the optimizer. In a bitmap scan the output of several indexes can be combined via AND or OR rules, so it is difficult to associate individual heap row fetches with specific indexes when a bitmap scan is used. Therefore, a bitmap scan increments the pg_stat_all_indexes.idx_tup_read count(s) for the index(es) it uses, and it increments the pg_stat_all_tables.idx_tup_fetch count for the table, but it does not affect pg_stat_all_indexes.idx_tup_fetch. The optimizer also accesses indexes to check for supplied constants whose values are outside the recorded range of the optimizer statistics because the optimizer statistics might be stale.

Note

The idx_tup_read and idx_tup_fetch counts can be different even without any use of bitmap scans, because idx_tup_read counts index entries retrieved from the index while idx_tup_fetch counts live rows fetched from the table. The latter will be less if any dead or not-yet-committed rows are fetched using the index, or if any heap fetches are avoided by means of an index-only scan.

28.2.19. pg_statio_all_tables

The pg_statio_all_tables view will contain one row for each table in the current database (including TOAST tables), showing statistics about I/O on that specific table. The pg_statio_user_tables and pg_statio_sys_tables views contain the same information, but filtered to only show user and system tables respectively.

Table 28.29. pg_statio_all_tables View

Column Type

Description

relid oid

OID of a table

schemaname name

Name of the schema that this table is in

relname name

Name of this table

heap_blks_read bigint

Number of disk blocks read from this table

heap_blks_hit bigint

Number of buffer hits in this table

idx_blks_read bigint

Number of disk blocks read from all indexes on this table

idx_blks_hit bigint

Number of buffer hits in all indexes on this table

toast_blks_read bigint

Number of disk blocks read from this table's TOAST table (if any)

toast_blks_hit bigint

Number of buffer hits in this table's TOAST table (if any)

tidx_blks_read bigint

Number of disk blocks read from this table's TOAST table indexes (if any)

tidx_blks_hit bigint

Number of buffer hits in this table's TOAST table indexes (if any)


28.2.20. pg_statio_all_indexes

The pg_statio_all_indexes view will contain one row for each index in the current database, showing statistics about I/O on that specific index. The pg_statio_user_indexes and pg_statio_sys_indexes views contain the same information, but filtered to only show user and system indexes respectively.

Table 28.30. pg_statio_all_indexes View

Column Type

Description

relid oid

OID of the table for this index

indexrelid oid

OID of this index

schemaname name

Name of the schema this index is in

relname name

Name of the table for this index

indexrelname name

Name of this index

idx_blks_read bigint

Number of disk blocks read from this index

idx_blks_hit bigint

Number of buffer hits in this index


28.2.21. pg_statio_all_sequences

The pg_statio_all_sequences view will contain one row for each sequence in the current database, showing statistics about I/O on that specific sequence.

Table 28.31. pg_statio_all_sequences View

Column Type

Description

relid oid

OID of a sequence

schemaname name

Name of the schema this sequence is in

relname name

Name of this sequence

blks_read bigint

Number of disk blocks read from this sequence

blks_hit bigint

Number of buffer hits in this sequence


28.2.22. pg_stat_user_functions

The pg_stat_user_functions view will contain one row for each tracked function, showing statistics about executions of that function. The track_functions parameter controls exactly which functions are tracked.

Table 28.32. pg_stat_user_functions View

Column Type

Description

funcid oid

OID of a function

schemaname name

Name of the schema this function is in

funcname name

Name of this function

calls bigint

Number of times this function has been called

total_time double precision

Total time spent in this function and all other functions called by it, in milliseconds

self_time double precision

Total time spent in this function itself, not including other functions called by it, in milliseconds


28.2.23. pg_stat_slru

PostgreSQL accesses certain on-disk information via SLRU (simple least-recently-used) caches. The pg_stat_slru view will contain one row for each tracked SLRU cache, showing statistics about access to cached pages.

Table 28.33. pg_stat_slru View

Column Type

Description

name text

Name of the SLRU

blks_zeroed bigint

Number of blocks zeroed during initializations

blks_hit bigint

Number of times disk blocks were found already in the SLRU, so that a read was not necessary (this only includes hits in the SLRU, not the operating system's file system cache)

blks_read bigint

Number of disk blocks read for this SLRU

blks_written bigint

Number of disk blocks written for this SLRU

blks_exists bigint

Number of blocks checked for existence for this SLRU

flushes bigint

Number of flushes of dirty data for this SLRU

truncates bigint

Number of truncates for this SLRU

stats_reset timestamp with time zone

Time at which these statistics were last reset


28.2.24. Statistics Functions

Other ways of looking at the statistics can be set up by writing queries that use the same underlying statistics access functions used by the standard views shown above. For details such as the functions' names, consult the definitions of the standard views. (For example, in psql you could issue \d+ pg_stat_activity.) The access functions for per-database statistics take a database OID as an argument to identify which database to report on. The per-table and per-index functions take a table or index OID. The functions for per-function statistics take a function OID. Note that only tables, indexes, and functions in the current database can be seen with these functions.

Additional functions related to the cumulative statistics system are listed in Table 28.34.

Table 28.34. Additional Statistics Functions

Function

Description

pg_backend_pid () → integer

Returns the process ID of the server process attached to the current session.

pg_stat_get_activity ( integer ) → setof record

Returns a record of information about the backend with the specified process ID, or one record for each active backend in the system if NULL is specified. The fields returned are a subset of those in the pg_stat_activity view.

pg_stat_get_snapshot_timestamp () → timestamp with time zone

Returns the timestamp of the current statistics snapshot, or NULL if no statistics snapshot has been taken. A snapshot is taken the first time cumulative statistics are accessed in a transaction if stats_fetch_consistency is set to snapshot

pg_stat_get_xact_blocks_fetched ( oid ) → bigint

Returns the number of block read requests for table or index, in the current transaction. This number minus pg_stat_get_xact_blocks_hit gives the number of kernel read() calls; the number of actual physical reads is usually lower due to kernel-level buffering.

pg_stat_get_xact_blocks_hit ( oid ) → bigint

Returns the number of block read requests for table or index, in the current transaction, found in cache (not triggering kernel read() calls).

pg_stat_clear_snapshot () → void

Discards the current statistics snapshot or cached information.

pg_stat_reset () → void

Resets all statistics counters for the current database to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_shared ( text ) → void

Resets some cluster-wide statistics counters to zero, depending on the argument. The argument can be bgwriter to reset all the counters shown in the pg_stat_bgwriter view, archiver to reset all the counters shown in the pg_stat_archiver view, wal to reset all the counters shown in the pg_stat_wal view or recovery_prefetch to reset all the counters shown in the pg_stat_recovery_prefetch view.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_single_table_counters ( oid ) → void

Resets statistics for a single table or index in the current database or shared across all databases in the cluster to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_single_function_counters ( oid ) → void

Resets statistics for a single function in the current database to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_slru ( text ) → void

Resets statistics to zero for a single SLRU cache, or for all SLRUs in the cluster. If the argument is NULL, all counters shown in the pg_stat_slru view for all SLRU caches are reset. The argument can be one of CommitTs, MultiXactMember, MultiXactOffset, Notify, Serial, Subtrans, or Xact to reset the counters for only that entry. If the argument is other (or indeed, any unrecognized name), then the counters for all other SLRU caches, such as extension-defined caches, are reset.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_replication_slot ( text ) → void

Resets statistics of the replication slot defined by the argument. If the argument is NULL, resets statistics for all the replication slots.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_subscription_stats ( oid ) → void

Resets statistics for a single subscription shown in the pg_stat_subscription_stats view to zero. If the argument is NULL, reset statistics for all subscriptions.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.


Warning

Using pg_stat_reset() also resets counters that autovacuum uses to determine when to trigger a vacuum or an analyze. Resetting these counters can cause autovacuum to not perform necessary work, which can cause problems such as table bloat or out-dated table statistics. A database-wide ANALYZE is recommended after the statistics have been reset.

pg_stat_get_activity, the underlying function of the pg_stat_activity view, returns a set of records containing all the available information about each backend process. Sometimes it may be more convenient to obtain just a subset of this information. In such cases, an older set of per-backend statistics access functions can be used; these are shown in Table 28.35. These access functions use a backend ID number, which ranges from one to the number of currently active backends. The function pg_stat_get_backend_idset provides a convenient way to generate one row for each active backend for invoking these functions. For example, to show the PIDs and current queries of all backends:

SELECT pg_stat_get_backend_pid(s.backendid) AS pid,
       pg_stat_get_backend_activity(s.backendid) AS query
    FROM (SELECT pg_stat_get_backend_idset() AS backendid) AS s;

Table 28.35. Per-Backend Statistics Functions

Function

Description

pg_stat_get_backend_idset () → setof integer

Returns the set of currently active backend ID numbers (from 1 to the number of active backends).

pg_stat_get_backend_activity ( integer ) → text

Returns the text of this backend's most recent query.

pg_stat_get_backend_activity_start ( integer ) → timestamp with time zone

Returns the time when the backend's most recent query was started.

pg_stat_get_backend_client_addr ( integer ) → inet

Returns the IP address of the client connected to this backend.

pg_stat_get_backend_client_port ( integer ) → integer

Returns the TCP port number that the client is using for communication.

pg_stat_get_backend_dbid ( integer ) → oid

Returns the OID of the database this backend is connected to.

pg_stat_get_backend_pid ( integer ) → integer

Returns the process ID of this backend.

pg_stat_get_backend_start ( integer ) → timestamp with time zone

Returns the time when this process was started.

pg_stat_get_backend_userid ( integer ) → oid

Returns the OID of the user logged into this backend.

pg_stat_get_backend_wait_event_type ( integer ) → text

Returns the wait event type name if this backend is currently waiting, otherwise NULL. See Table 28.4 for details.

pg_stat_get_backend_wait_event ( integer ) → text

Returns the wait event name if this backend is currently waiting, otherwise NULL. See Table 28.5 through Table 28.13.

pg_stat_get_backend_xact_start ( integer ) → timestamp with time zone

Returns the time when the backend's current transaction was started.