Postgres Pro Standard : Documentation: 14: 26.2. The Statistics Collector : Postgres Professional

26.2. The Statistics Collector
Prev	Up	Chapter 26. Monitoring Database Activity	Home	Next

26.2. The Statistics Collector

Postgres Pro's statistics collector is a subsystem that supports collection and reporting of information about server activity. Presently, the collector can count accesses to tables and indexes in both disk-block and individual-row terms. It also tracks the total number of rows in each table, and information about vacuum and analyze actions for each table. It can also count calls to user-defined functions and the total time spent in each one.

Postgres Pro also supports reporting dynamic information about exactly what is going on in the system right now, such as the exact command currently being executed by other server processes, and which other connections exist in the system. This facility is independent of the collector process.

26.2.1. Statistics Collection Configuration

Since collection of statistics adds some overhead to query execution, the system can be configured to collect or not collect information. This is controlled by configuration parameters that are normally set in postgresql.conf. (See Chapter 18 for details about setting configuration parameters.)

The parameter track_activities enables monitoring of the current command being executed by any server process.

The parameter track_counts controls whether statistics are collected about table and index accesses.

The parameter track_functions enables tracking of usage of user-defined functions.

The parameter track_io_timing enables monitoring of block read and write times.

The parameter track_wal_io_timing enables monitoring of WAL write times.

Normally these parameters are set in postgresql.conf so that they apply to all server processes, but it is possible to turn them on or off in individual sessions using the SET command. (To prevent ordinary users from hiding their activity from the administrator, only superusers are allowed to change these parameters with SET.)

The statistics collector transmits the collected information to other Postgres Pro processes through temporary files. These files are stored in the directory named by the stats_temp_directory parameter, pg_stat_tmp by default. For better performance, stats_temp_directory can be pointed at a RAM-based file system, decreasing physical I/O requirements. When the server shuts down cleanly, a permanent copy of the statistics data is stored in the pg_stat subdirectory, so that statistics can be retained across server restarts. When recovery is performed at server start (e.g., after immediate shutdown, server crash, and point-in-time recovery), all statistics counters are reset.

26.2.2. Viewing Statistics

Several predefined views, listed in Table 26.1, are available to show the current state of the system. There are also several other views, listed in Table 26.2, available to show the results of statistics collection. Alternatively, one can build custom views using the underlying statistics functions, as discussed in Section 26.2.22.

When using the statistics to monitor collected data, it is important to realize that the information does not update instantaneously. Each individual server process transmits new statistical counts to the collector just before going idle; so a query or transaction still in progress does not affect the displayed totals. Also, the collector itself emits a new report at most once per PGSTAT_STAT_INTERVAL milliseconds (500 ms unless altered while building the server). So the displayed information lags behind actual activity. However, current-query information collected by track_activities is always up-to-date.

Another important point is that when a server process is asked to display any of these statistics, it first fetches the most recent report emitted by the collector process and then continues to use this snapshot for all statistical views and functions until the end of its current transaction. So the statistics will show static information as long as you continue the current transaction. Similarly, information about the current queries of all sessions is collected when any such information is first requested within a transaction, and the same information will be displayed throughout the transaction. This is a feature, not a bug, because it allows you to perform several queries on the statistics and correlate the results without worrying that the numbers are changing underneath you. But if you want to see new results with each query, be sure to do the queries outside any transaction block. Alternatively, you can invoke pg_stat_clear_snapshot(), which will discard the current transaction's statistics snapshot (if any). The next use of statistical information will cause a new snapshot to be fetched.

A transaction can also see its own statistics (as yet untransmitted to the collector) in the views pg_stat_xact_all_tables, pg_stat_xact_sys_tables, pg_stat_xact_user_tables, and pg_stat_xact_user_functions. These numbers do not act as stated above; instead they update continuously throughout the transaction.

Some of the information in the dynamic statistics views shown in Table 26.1 is security restricted. Ordinary users can only see all the information about their own sessions (sessions belonging to a role that they are a member of). In rows about other sessions, many columns will be null. Note, however, that the existence of a session and its general properties such as its sessions user and database are visible to all users. Superusers and members of the built-in role pg_read_all_stats (see also Section 20.5) can see all the information about all sessions.

Table 26.1. Dynamic Statistics Views

View Name	Description
`pg_stat_activity`	One row per server process, showing information related to the current activity of that process, such as state and current query. See `pg_stat_activity` for details.
`pg_stat_replication`	One row per WAL sender process, showing statistics about replication to that sender's connected standby server. See `pg_stat_replication` for details.
`pg_stat_wal_receiver`	Only one row, showing statistics about the WAL receiver from that receiver's connected server. See `pg_stat_wal_receiver` for details.
`pg_stat_subscription`	At least one row per subscription, showing information about the subscription workers. See `pg_stat_subscription` for details.
`pg_stat_ssl`	One row per connection (regular and replication), showing information about SSL used on this connection. See `pg_stat_ssl` for details.
`pg_stat_gssapi`	One row per connection (regular and replication), showing information about GSSAPI authentication and encryption used on this connection. See `pg_stat_gssapi` for details.
`pg_stat_progress_analyze`	One row for each backend (including autovacuum worker processes) running `ANALYZE`, showing current progress. See Section 26.4.1.
`pg_stat_progress_create_index`	One row for each backend running `CREATE INDEX` or `REINDEX`, showing current progress. See Section 26.4.2.
`pg_stat_progress_vacuum`	One row for each backend (including autovacuum worker processes) running `VACUUM`, showing current progress. See Section 26.4.3.
`pg_stat_progress_cluster`	One row for each backend running `CLUSTER` or `VACUUM FULL`, showing current progress. See Section 26.4.4.
`pg_stat_progress_basebackup`	One row for each WAL sender process streaming a base backup, showing current progress. See Section 26.4.5.
`pg_stat_progress_copy`	One row for each backend running `COPY`, showing current progress. See Section 26.4.6.

Table 26.2. Collected Statistics Views

View Name	Description
`pg_stat_archiver`	One row only, showing statistics about the WAL archiver process's activity. See `pg_stat_archiver` for details.
`pg_stat_bgwriter`	One row only, showing statistics about the background writer process's activity. See `pg_stat_bgwriter` for details.
`pg_stat_wal`	One row only, showing statistics about WAL activity. See `pg_stat_wal` for details.
`pg_stat_database`	One row per database, showing database-wide statistics. See `pg_stat_database` for details.
`pg_stat_database_conflicts`	One row per database, showing database-wide statistics about query cancels due to conflict with recovery on standby servers. See `pg_stat_database_conflicts` for details.
`pg_stat_all_tables`	One row for each table in the current database, showing statistics about accesses to that specific table. See `pg_stat_all_tables` for details.
`pg_stat_sys_tables`	Same as `pg_stat_all_tables`, except that only system tables are shown.
`pg_stat_user_tables`	Same as `pg_stat_all_tables`, except that only user tables are shown.
`pg_stat_xact_all_tables`	Similar to `pg_stat_all_tables`, but counts actions taken so far within the current transaction (which are not yet included in `pg_stat_all_tables` and related views). The columns for numbers of live and dead rows and vacuum and analyze actions are not present in this view.
`pg_stat_xact_sys_tables`	Same as `pg_stat_xact_all_tables`, except that only system tables are shown.
`pg_stat_xact_user_tables`	Same as `pg_stat_xact_all_tables`, except that only user tables are shown.
`pg_stat_all_indexes`	One row for each index in the current database, showing statistics about accesses to that specific index. See `pg_stat_all_indexes` for details.
`pg_stat_sys_indexes`	Same as `pg_stat_all_indexes`, except that only indexes on system tables are shown.
`pg_stat_user_indexes`	Same as `pg_stat_all_indexes`, except that only indexes on user tables are shown.
`pg_statio_all_tables`	One row for each table in the current database, showing statistics about I/O on that specific table. See `pg_statio_all_tables` for details.
`pg_statio_sys_tables`	Same as `pg_statio_all_tables`, except that only system tables are shown.
`pg_statio_user_tables`	Same as `pg_statio_all_tables`, except that only user tables are shown.
`pg_statio_all_indexes`	One row for each index in the current database, showing statistics about I/O on that specific index. See `pg_statio_all_indexes` for details.
`pg_statio_sys_indexes`	Same as `pg_statio_all_indexes`, except that only indexes on system tables are shown.
`pg_statio_user_indexes`	Same as `pg_statio_all_indexes`, except that only indexes on user tables are shown.
`pg_statio_all_sequences`	One row for each sequence in the current database, showing statistics about I/O on that specific sequence. See `pg_statio_all_sequences` for details.
`pg_statio_sys_sequences`	Same as `pg_statio_all_sequences`, except that only system sequences are shown. (Presently, no system sequences are defined, so this view is always empty.)
`pg_statio_user_sequences`	Same as `pg_statio_all_sequences`, except that only user sequences are shown.
`pg_stat_user_functions`	One row for each tracked function, showing statistics about executions of that function. See `pg_stat_user_functions` for details.
`pg_stat_xact_user_functions`	Similar to `pg_stat_user_functions`, but counts only calls during the current transaction (which are not yet included in `pg_stat_user_functions`).
`pg_stat_slru`	One row per SLRU, showing statistics of operations. See `pg_stat_slru` for details.
`pg_stat_replication_slots`	One row per replication slot, showing statistics about the replication slot's usage. See `pg_stat_replication_slots` for details.

The per-index statistics are particularly useful to determine which indexes are being used and how effective they are.

The pg_statio_ views are primarily useful to determine the effectiveness of the buffer cache. When the number of actual disk reads is much smaller than the number of buffer hits, then the cache is satisfying most read requests without invoking a kernel call. However, these statistics do not give the entire story: due to the way in which Postgres Pro handles disk I/O, data that is not in the Postgres Pro buffer cache might still reside in the kernel's I/O cache, and might therefore still be fetched without requiring a physical read. Users interested in obtaining more detailed information on Postgres Pro I/O behavior are advised to use the Postgres Pro statistics collector in combination with operating system utilities that allow insight into the kernel's handling of I/O.

26.2.3. `pg_stat_activity`

The pg_stat_activity view will have one row per server process, showing information related to the current activity of that process.

Table 26.3. pg_stat_activity View

Column Type Description
`datid` `oid` OID of the database this backend is connected to
`datname` `name` Name of the database this backend is connected to
`pid` `integer` Process ID of this backend
`leader_pid` `integer` Process ID of the parallel group leader, if this process is a parallel query worker. `NULL` if this process is a parallel group leader or does not participate in parallel query.
`usesysid` `oid` OID of the user logged into this backend
`usename` `name` Name of the user logged into this backend
`application_name` `text` Name of the application that is connected to this backend
`client_addr` `inet` IP address of the client connected to this backend. If this field is null, it indicates either that the client is connected via a Unix socket on the server machine or that this is an internal process such as autovacuum.
`client_hostname` `text` Host name of the connected client, as reported by a reverse DNS lookup of `client_addr`. This field will only be non-null for IP connections, and only when log_hostname is enabled.
`client_port` `integer` TCP port number that the client is using for communication with this backend, or `-1` if a Unix socket is used. If this field is null, it indicates that this is an internal server process.
`backend_start` `timestamp with time zone` Time when this process was started. For client backends, this is the time the client connected to the server.
`xact_start` `timestamp with time zone` Time when this process' current transaction was started, or null if no transaction is active. If the current query is the first of its transaction, this column is equal to the `query_start` column.
`query_start` `timestamp with time zone` Time when the currently active query was started, or if `state` is not `active`, when the last query was started
`state_change` `timestamp with time zone` Time when the `state` was last changed
`wait_event_type` `text` The type of event for which the backend is waiting, if any; otherwise NULL. See Table 26.4.
`wait_event` `text` Wait event name if backend is currently waiting, otherwise NULL. See Table 26.5 through Table 26.13.
`state` `text` Current overall state of this backend. Possible values are: `active`: The backend is executing a query. `idle`: The backend is waiting for a new client command. `idle in transaction`: The backend is in a transaction, but is not currently executing a query. `idle in transaction (aborted)`: This state is similar to `idle in transaction`, except one of the statements in the transaction caused an error. `fastpath function call`: The backend is executing a fast-path function. `disabled`: This state is reported if track_activities is disabled in this backend.
`backend_xid` `xid` Top-level transaction identifier of this backend, if any.
`backend_xmin` `xid` The current backend's `xmin` horizon.
`query_id` `bigint` Identifier of this backend's most recent query. If `state` is `active` this field shows the identifier of the currently executing query. In all other states, it shows the identifier of last query that was executed. Query identifiers are not computed by default so this field will be null unless compute_query_id parameter is enabled or a third-party module that computes query identifiers is configured.
`query` `text` Text of this backend's most recent query. If `state` is `active` this field shows the currently executing query. In all other states, it shows the last query that was executed. By default the query text is truncated at 1024 bytes; this value can be changed via the parameter track_activity_query_size.
`backend_type` `text` Type of current backend. Possible types are `autovacuum launcher`, `autovacuum worker`, `logical replication launcher`, `logical replication worker`, `parallel worker`, `background writer`, `client backend`, `checkpointer`, `archiver`, `startup`, `walreceiver`, `walsender` and `walwriter`. In addition, background workers registered by extensions may have additional types.

Column Type

Description

datid oid

OID of the database this backend is connected to

datname name

Name of the database this backend is connected to

pid integer

Process ID of this backend

leader_pid integer

Process ID of the parallel group leader, if this process is a parallel query worker. NULL if this process is a parallel group leader or does not participate in parallel query.

usesysid oid

OID of the user logged into this backend

usename name

Name of the user logged into this backend

application_name text

Name of the application that is connected to this backend

client_addr inet

IP address of the client connected to this backend. If this field is null, it indicates either that the client is connected via a Unix socket on the server machine or that this is an internal process such as autovacuum.

client_hostname text

Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This field will only be non-null for IP connections, and only when log_hostname is enabled.

client_port integer

TCP port number that the client is using for communication with this backend, or -1 if a Unix socket is used. If this field is null, it indicates that this is an internal server process.

backend_start timestamp with time zone

Time when this process was started. For client backends, this is the time the client connected to the server.

xact_start timestamp with time zone

Time when this process' current transaction was started, or null if no transaction is active. If the current query is the first of its transaction, this column is equal to the query_start column.

query_start timestamp with time zone

Time when the currently active query was started, or if state is not active, when the last query was started

state_change timestamp with time zone

Time when the state was last changed

wait_event_type text

The type of event for which the backend is waiting, if any; otherwise NULL. See Table 26.4.

wait_event text

Wait event name if backend is currently waiting, otherwise NULL. See Table 26.5 through Table 26.13.

state text

Current overall state of this backend. Possible values are:

active: The backend is executing a query.
idle: The backend is waiting for a new client command.
idle in transaction: The backend is in a transaction, but is not currently executing a query.
idle in transaction (aborted): This state is similar to idle in transaction, except one of the statements in the transaction caused an error.
fastpath function call: The backend is executing a fast-path function.
disabled: This state is reported if track_activities is disabled in this backend.

backend_xid xid

Top-level transaction identifier of this backend, if any.

backend_xmin xid

The current backend's xmin horizon.

query_id bigint

Identifier of this backend's most recent query. If state is active this field shows the identifier of the currently executing query. In all other states, it shows the identifier of last query that was executed. Query identifiers are not computed by default so this field will be null unless compute_query_id parameter is enabled or a third-party module that computes query identifiers is configured.

query text

Text of this backend's most recent query. If state is active this field shows the currently executing query. In all other states, it shows the last query that was executed. By default the query text is truncated at 1024 bytes; this value can be changed via the parameter track_activity_query_size.

backend_type text

Type of current backend. Possible types are autovacuum launcher, autovacuum worker, logical replication launcher, logical replication worker, parallel worker, background writer, client backend, checkpointer, archiver, startup, walreceiver, walsender and walwriter. In addition, background workers registered by extensions may have additional types.

Note

The wait_event and state columns are independent. If a backend is in the active state, it may or may not be waiting on some event. If the state is active and wait_event is non-null, it means that a query is being executed, but is being blocked somewhere in the system.

Table 26.4. Wait Event Types

Wait Event Type	Description
`Activity`	The server process is idle. This event type indicates a process waiting for activity in its main processing loop. `wait_event` will identify the specific wait point; see Table 26.5.
`BufferPin`	The server process is waiting for exclusive access to a data buffer. Buffer pin waits can be protracted if another process holds an open cursor that last read data from the buffer in question. See Table 26.6.
`Client`	The server process is waiting for activity on a socket connected to a user application. Thus, the server expects something to happen that is independent of its internal processes. `wait_event` will identify the specific wait point; see Table 26.7.
`Extension`	The server process is waiting for some condition defined by an extension module. See Table 26.8.
`IO`	The server process is waiting for an I/O operation to complete. `wait_event` will identify the specific wait point; see Table 26.9.
`IPC`	The server process is waiting for some interaction with another server process. `wait_event` will identify the specific wait point; see Table 26.10.
`Lock`	The server process is waiting for a heavyweight lock. Heavyweight locks, also known as lock manager locks or simply locks, primarily protect SQL-visible objects such as tables. However, they are also used to ensure mutual exclusion for certain internal operations such as relation extension. `wait_event` will identify the type of lock awaited; see Table 26.11.
`LWLock`	The server process is waiting for a lightweight lock. Most such locks protect a particular data structure in shared memory. `wait_event` will contain a name identifying the purpose of the lightweight lock. (Some locks have specific names; others are part of a group of locks each with a similar purpose.) See Table 26.12.
`Timeout`	The server process is waiting for a timeout to expire. `wait_event` will identify the specific wait point; see Table 26.13.

Table 26.5. Wait Events of Type Activity

`Activity` Wait Event	Description
`ArchiverMain`	Waiting in main loop of archiver process.
`AutoVacuumMain`	Waiting in main loop of autovacuum launcher process.
`BgWriterHibernate`	Waiting in background writer process, hibernating.
`BgWriterMain`	Waiting in main loop of background writer process.
`CheckpointerMain`	Waiting in main loop of checkpointer process.
`LogicalApplyMain`	Waiting in main loop of logical replication apply process.
`LogicalLauncherMain`	Waiting in main loop of logical replication launcher process.
`PgStatMain`	Waiting in main loop of statistics collector process.
`RecoveryWalStream`	Waiting in main loop of startup process for WAL to arrive, during streaming recovery.
`SysLoggerMain`	Waiting in main loop of syslogger process.
`WalReceiverMain`	Waiting in main loop of WAL receiver process.
`WalSenderMain`	Waiting in main loop of WAL sender process.
`WalWriterMain`	Waiting in main loop of WAL writer process.

Table 26.6. Wait Events of Type BufferPin

`BufferPin` Wait Event	Description
`BufferPin`	Waiting to acquire an exclusive pin on a buffer.

Table 26.7. Wait Events of Type Client

`Client` Wait Event	Description
`ClientRead`	Waiting to read data from the client.
`ClientWrite`	Waiting to write data to the client.
`GSSOpenServer`	Waiting to read data from the client while establishing a GSSAPI session.
`LibPQWalReceiverConnect`	Waiting in WAL receiver to establish connection to remote server.
`LibPQWalReceiverReceive`	Waiting in WAL receiver to receive data from remote server.
`SSLOpenServer`	Waiting for SSL while attempting connection.
`WalSenderWaitForWAL`	Waiting for WAL to be flushed in WAL sender process.
`WalSenderWriteData`	Waiting for any activity when processing replies from WAL receiver in WAL sender process.

Table 26.8. Wait Events of Type Extension

`Extension` Wait Event	Description
`Extension`	Waiting in an extension.

Table 26.9. Wait Events of Type IO

`IO` Wait Event	Description
`BaseBackupRead`	Waiting for base backup to read from a file.
`BufFileRead`	Waiting for a read from a buffered file.
`BufFileWrite`	Waiting for a write to a buffered file.
`BufFileTruncate`	Waiting for a buffered file to be truncated.
`ControlFileRead`	Waiting for a read from the `pg_control` file.
`ControlFileSync`	Waiting for the `pg_control` file to reach durable storage.
`ControlFileSyncUpdate`	Waiting for an update to the `pg_control` file to reach durable storage.
`ControlFileWrite`	Waiting for a write to the `pg_control` file.
`ControlFileWriteUpdate`	Waiting for a write to update the `pg_control` file.
`CopyFileRead`	Waiting for a read during a file copy operation.
`CopyFileWrite`	Waiting for a write during a file copy operation.
`DSMFillZeroWrite`	Waiting to fill a dynamic shared memory backing file with zeroes.
`DataFileExtend`	Waiting for a relation data file to be extended.
`DataFileFlush`	Waiting for a relation data file to reach durable storage.
`DataFileImmediateSync`	Waiting for an immediate synchronization of a relation data file to durable storage.
`DataFilePrefetch`	Waiting for an asynchronous prefetch from a relation data file.
`DataFileRead`	Waiting for a read from a relation data file.
`DataFileSync`	Waiting for changes to a relation data file to reach durable storage.
`DataFileTruncate`	Waiting for a relation data file to be truncated.
`DataFileWrite`	Waiting for a write to a relation data file.
`LockFileAddToDataDirRead`	Waiting for a read while adding a line to the data directory lock file.
`LockFileAddToDataDirSync`	Waiting for data to reach durable storage while adding a line to the data directory lock file.
`LockFileAddToDataDirWrite`	Waiting for a write while adding a line to the data directory lock file.
`LockFileCreateRead`	Waiting to read while creating the data directory lock file.
`LockFileCreateSync`	Waiting for data to reach durable storage while creating the data directory lock file.
`LockFileCreateWrite`	Waiting for a write while creating the data directory lock file.
`LockFileReCheckDataDirRead`	Waiting for a read during recheck of the data directory lock file.
`LogicalRewriteCheckpointSync`	Waiting for logical rewrite mappings to reach durable storage during a checkpoint.
`LogicalRewriteMappingSync`	Waiting for mapping data to reach durable storage during a logical rewrite.
`LogicalRewriteMappingWrite`	Waiting for a write of mapping data during a logical rewrite.
`LogicalRewriteSync`	Waiting for logical rewrite mappings to reach durable storage.
`LogicalRewriteTruncate`	Waiting for truncate of mapping data during a logical rewrite.
`LogicalRewriteWrite`	Waiting for a write of logical rewrite mappings.
`RelationMapRead`	Waiting for a read of the relation map file.
`RelationMapSync`	Waiting for the relation map file to reach durable storage.
`RelationMapWrite`	Waiting for a write to the relation map file.
`ReorderBufferRead`	Waiting for a read during reorder buffer management.
`ReorderBufferWrite`	Waiting for a write during reorder buffer management.
`ReorderLogicalMappingRead`	Waiting for a read of a logical mapping during reorder buffer management.
`ReplicationSlotRead`	Waiting for a read from a replication slot control file.
`ReplicationSlotRestoreSync`	Waiting for a replication slot control file to reach durable storage while restoring it to memory.
`ReplicationSlotSync`	Waiting for a replication slot control file to reach durable storage.
`ReplicationSlotWrite`	Waiting for a write to a replication slot control file.
`SLRUFlushSync`	Waiting for SLRU data to reach durable storage during a checkpoint or database shutdown.
`SLRURead`	Waiting for a read of an SLRU page.
`SLRUSync`	Waiting for SLRU data to reach durable storage following a page write.
`SLRUWrite`	Waiting for a write of an SLRU page.
`SnapbuildRead`	Waiting for a read of a serialized historical catalog snapshot.
`SnapbuildSync`	Waiting for a serialized historical catalog snapshot to reach durable storage.
`SnapbuildWrite`	Waiting for a write of a serialized historical catalog snapshot.
`TimelineHistoryFileSync`	Waiting for a timeline history file received via streaming replication to reach durable storage.
`TimelineHistoryFileWrite`	Waiting for a write of a timeline history file received via streaming replication.
`TimelineHistoryRead`	Waiting for a read of a timeline history file.
`TimelineHistorySync`	Waiting for a newly created timeline history file to reach durable storage.
`TimelineHistoryWrite`	Waiting for a write of a newly created timeline history file.
`TwophaseFileRead`	Waiting for a read of a two phase state file.
`TwophaseFileSync`	Waiting for a two phase state file to reach durable storage.
`TwophaseFileWrite`	Waiting for a write of a two phase state file.
`WALBootstrapSync`	Waiting for WAL to reach durable storage during bootstrapping.
`WALBootstrapWrite`	Waiting for a write of a WAL page during bootstrapping.
`WALCopyRead`	Waiting for a read when creating a new WAL segment by copying an existing one.
`WALCopySync`	Waiting for a new WAL segment created by copying an existing one to reach durable storage.
`WALCopyWrite`	Waiting for a write when creating a new WAL segment by copying an existing one.
`WALInitSync`	Waiting for a newly initialized WAL file to reach durable storage.
`WALInitWrite`	Waiting for a write while initializing a new WAL file.
`WALRead`	Waiting for a read from a WAL file.
`WALSenderTimelineHistoryRead`	Waiting for a read from a timeline history file during a walsender timeline command.
`WALSync`	Waiting for a WAL file to reach durable storage.
`WALSyncMethodAssign`	Waiting for data to reach durable storage while assigning a new WAL sync method.
`WALWrite`	Waiting for a write to a WAL file.
`LogicalChangesRead`	Waiting for a read from a logical changes file.
`LogicalChangesWrite`	Waiting for a write to a logical changes file.
`LogicalSubxactRead`	Waiting for a read from a logical subxact file.
`LogicalSubxactWrite`	Waiting for a write to a logical subxact file.

Table 26.10. Wait Events of Type IPC

`IPC` Wait Event	Description
`AppendReady`	Waiting for subplan nodes of an `Append` plan node to be ready.
`BackendTermination`	Waiting for the termination of another backend.
`BackupWaitWalArchive`	Waiting for WAL files required for a backup to be successfully archived.
`BgWorkerShutdown`	Waiting for background worker to shut down.
`BgWorkerStartup`	Waiting for background worker to start up.
`BtreePage`	Waiting for the page number needed to continue a parallel B-tree scan to become available.
`BufferIO`	Waiting for buffer I/O to complete.
`CheckpointDone`	Waiting for a checkpoint to complete.
`CheckpointStart`	Waiting for a checkpoint to start.
`ExecuteGather`	Waiting for activity from a child process while executing a `Gather` plan node.
`HashBatchAllocate`	Waiting for an elected Parallel Hash participant to allocate a hash table.
`HashBatchElect`	Waiting to elect a Parallel Hash participant to allocate a hash table.
`HashBatchLoad`	Waiting for other Parallel Hash participants to finish loading a hash table.
`HashBuildAllocate`	Waiting for an elected Parallel Hash participant to allocate the initial hash table.
`HashBuildElect`	Waiting to elect a Parallel Hash participant to allocate the initial hash table.
`HashBuildHashInner`	Waiting for other Parallel Hash participants to finish hashing the inner relation.
`HashBuildHashOuter`	Waiting for other Parallel Hash participants to finish partitioning the outer relation.
`HashGrowBatchesAllocate`	Waiting for an elected Parallel Hash participant to allocate more batches.
`HashGrowBatchesDecide`	Waiting to elect a Parallel Hash participant to decide on future batch growth.
`HashGrowBatchesElect`	Waiting to elect a Parallel Hash participant to allocate more batches.
`HashGrowBatchesFinish`	Waiting for an elected Parallel Hash participant to decide on future batch growth.
`HashGrowBatchesRepartition`	Waiting for other Parallel Hash participants to finish repartitioning.
`HashGrowBucketsAllocate`	Waiting for an elected Parallel Hash participant to finish allocating more buckets.
`HashGrowBucketsElect`	Waiting to elect a Parallel Hash participant to allocate more buckets.
`HashGrowBucketsReinsert`	Waiting for other Parallel Hash participants to finish inserting tuples into new buckets.
`LogicalSyncData`	Waiting for a logical replication remote server to send data for initial table synchronization.
`LogicalSyncStateChange`	Waiting for a logical replication remote server to change state.
`MessageQueueInternal`	Waiting for another process to be attached to a shared message queue.
`MessageQueuePutMessage`	Waiting to write a protocol message to a shared message queue.
`MessageQueueReceive`	Waiting to receive bytes from a shared message queue.
`MessageQueueSend`	Waiting to send bytes to a shared message queue.
`ParallelBitmapScan`	Waiting for parallel bitmap scan to become initialized.
`ParallelCreateIndexScan`	Waiting for parallel `CREATE INDEX` workers to finish heap scan.
`ParallelFinish`	Waiting for parallel workers to finish computing.
`ProcArrayGroupUpdate`	Waiting for the group leader to clear the transaction ID at transaction end.
`ProcSignalBarrier`	Waiting for a barrier event to be processed by all backends.
`Promote`	Waiting for standby promotion.
`RecoveryConflictSnapshot`	Waiting for recovery conflict resolution for a vacuum cleanup.
`RecoveryConflictTablespace`	Waiting for recovery conflict resolution for dropping a tablespace.
`RecoveryPause`	Waiting for recovery to be resumed.
`ReplicationOriginDrop`	Waiting for a replication origin to become inactive so it can be dropped.
`ReplicationSlotDrop`	Waiting for a replication slot to become inactive so it can be dropped.
`SafeSnapshot`	Waiting to obtain a valid snapshot for a `READ ONLY DEFERRABLE` transaction.
`SyncRep`	Waiting for confirmation from a remote server during synchronous replication.
`WalReceiverExit`	Waiting for the WAL receiver to exit.
`WalReceiverWaitStart`	Waiting for startup process to send initial data for streaming replication.
`XactGroupUpdate`	Waiting for the group leader to update transaction status at transaction end.

Table 26.11. Wait Events of Type Lock

`Lock` Wait Event	Description
`advisory`	Waiting to acquire an advisory user lock.
`extend`	Waiting to extend a relation.
`frozenid`	Waiting to update `pg_database`.`datfrozenxid` and `pg_database`.`datminmxid`.
`object`	Waiting to acquire a lock on a non-relation database object.
`page`	Waiting to acquire a lock on a page of a relation.
`relation`	Waiting to acquire a lock on a relation.
`spectoken`	Waiting to acquire a speculative insertion lock.
`transactionid`	Waiting for a transaction to finish.
`tuple`	Waiting to acquire a lock on a tuple.
`userlock`	Waiting to acquire a user lock.
`virtualxid`	Waiting to acquire a virtual transaction ID lock.

Table 26.12. Wait Events of Type LWLock

`LWLock` Wait Event	Description
`AddinShmemInit`	Waiting to manage an extension's space allocation in shared memory.
`AutoFile`	Waiting to update the `postgresql.auto.conf` file.
`Autovacuum`	Waiting to read or update the current state of autovacuum workers.
`AutovacuumSchedule`	Waiting to ensure that a table selected for autovacuum still needs vacuuming.
`BackgroundWorker`	Waiting to read or update background worker state.
`BtreeVacuum`	Waiting to read or update vacuum-related information for a B-tree index.
`BufferContent`	Waiting to access a data page in memory.
`BufferMapping`	Waiting to associate a data block with a buffer in the buffer pool.
`CheckpointerComm`	Waiting to manage fsync requests.
`CommitTs`	Waiting to read or update the last value set for a transaction commit timestamp.
`CommitTsBuffer`	Waiting for I/O on a commit timestamp SLRU buffer.
`CommitTsSLRU`	Waiting to access the commit timestamp SLRU cache.
`ControlFile`	Waiting to read or update the `pg_control` file or create a new WAL file.
`DynamicSharedMemoryControl`	Waiting to read or update dynamic shared memory allocation information.
`LockFastPath`	Waiting to read or update a process' fast-path lock information.
`LockManager`	Waiting to read or update information about “heavyweight” locks.
`LogicalRepWorker`	Waiting to read or update the state of logical replication workers.
`MultiXactGen`	Waiting to read or update shared multixact state.
`MultiXactMemberBuffer`	Waiting for I/O on a multixact member SLRU buffer.
`MultiXactMemberSLRU`	Waiting to access the multixact member SLRU cache.
`MultiXactOffsetBuffer`	Waiting for I/O on a multixact offset SLRU buffer.
`MultiXactOffsetSLRU`	Waiting to access the multixact offset SLRU cache.
`MultiXactTruncation`	Waiting to read or truncate multixact information.
`NotifyBuffer`	Waiting for I/O on a `NOTIFY` message SLRU buffer.
`NotifyQueue`	Waiting to read or update `NOTIFY` messages.
`NotifyQueueTail`	Waiting to update limit on `NOTIFY` message storage.
`NotifySLRU`	Waiting to access the `NOTIFY` message SLRU cache.
`OidGen`	Waiting to allocate a new OID.
`OldSnapshotTimeMap`	Waiting to read or update old snapshot control information.
`ParallelAppend`	Waiting to choose the next subplan during Parallel Append plan execution.
`ParallelHashJoin`	Waiting to synchronize workers during Parallel Hash Join plan execution.
`ParallelQueryDSA`	Waiting for parallel query dynamic shared memory allocation.
`PerSessionDSA`	Waiting for parallel query dynamic shared memory allocation.
`PerSessionRecordType`	Waiting to access a parallel query's information about composite types.
`PerSessionRecordTypmod`	Waiting to access a parallel query's information about type modifiers that identify anonymous record types.
`PerXactPredicateList`	Waiting to access the list of predicate locks held by the current serializable transaction during a parallel query.
`PredicateLockManager`	Waiting to access predicate lock information used by serializable transactions.
`ProcArray`	Waiting to access the shared per-process data structures (typically, to get a snapshot or report a session's transaction ID).
`RelationMapping`	Waiting to read or update a `pg_filenode.map` file (used to track the filenode assignments of certain system catalogs).
`RelCacheInit`	Waiting to read or update a `pg_internal.init` relation cache initialization file.
`ReplicationOrigin`	Waiting to create, drop or use a replication origin.
`ReplicationOriginState`	Waiting to read or update the progress of one replication origin.
`ReplicationSlotAllocation`	Waiting to allocate or free a replication slot.
`ReplicationSlotControl`	Waiting to read or update replication slot state.
`ReplicationSlotIO`	Waiting for I/O on a replication slot.
`SerialBuffer`	Waiting for I/O on a serializable transaction conflict SLRU buffer.
`SerializableFinishedList`	Waiting to access the list of finished serializable transactions.
`SerializablePredicateList`	Waiting to access the list of predicate locks held by serializable transactions.
`SerializableXactHash`	Waiting to read or update information about serializable transactions.
`SerialSLRU`	Waiting to access the serializable transaction conflict SLRU cache.
`SharedTidBitmap`	Waiting to access a shared TID bitmap during a parallel bitmap index scan.
`SharedTupleStore`	Waiting to access a shared tuple store during parallel query.
`ShmemIndex`	Waiting to find or allocate space in shared memory.
`SInvalRead`	Waiting to retrieve messages from the shared catalog invalidation queue.
`SInvalWrite`	Waiting to add a message to the shared catalog invalidation queue.
`SubtransBuffer`	Waiting for I/O on a sub-transaction SLRU buffer.
`SubtransSLRU`	Waiting to access the sub-transaction SLRU cache.
`SyncRep`	Waiting to read or update information about the state of synchronous replication.
`SyncScan`	Waiting to select the starting location of a synchronized table scan.
`TablespaceCreate`	Waiting to create or drop a tablespace.
`TwoPhaseState`	Waiting to read or update the state of prepared transactions.
`WALBufMapping`	Waiting to replace a page in WAL buffers.
`WALInsert`	Waiting to insert WAL data into a memory buffer.
`WALWrite`	Waiting for WAL buffers to be written to disk.
`WrapLimitsVacuum`	Waiting to update limits on transaction id and multixact consumption.
`XactBuffer`	Waiting for I/O on a transaction status SLRU buffer.
`XactSLRU`	Waiting to access the transaction status SLRU cache.
`XactTruncation`	Waiting to execute `pg_xact_status` or update the oldest transaction ID available to it.
`XidGen`	Waiting to allocate a new transaction ID.

Note

Extensions can add LWLock types to the list shown in Table 26.12. In some cases, the name assigned by an extension will not be available in all server processes; so an LWLock wait event might be reported as just “extension” rather than the extension-assigned name.

Table 26.13. Wait Events of Type Timeout

`Timeout` Wait Event	Description
`BaseBackupThrottle`	Waiting during base backup when throttling activity.
`CheckpointWriteDelay`	Waiting between writes while performing a checkpoint.
`PgSleep`	Waiting due to a call to `pg_sleep` or a sibling function.
`RecoveryApplyDelay`	Waiting to apply WAL during recovery because of a delay setting.
`RecoveryRetrieveRetryInterval`	Waiting during recovery when WAL data is not available from any source (`pg_wal`, archive or stream).
`RegisterSyncRequest`	Waiting while sending synchronization requests to the checkpointer, because the request queue is full.
`VacuumDelay`	Waiting in a cost-based vacuum delay point.

Here is an example of how wait events can be viewed:

SELECT pid, wait_event_type, wait_event FROM pg_stat_activity WHERE wait_event is NOT NULL;
 pid  | wait_event_type | wait_event 
------+-----------------+------------
 2540 | Lock            | relation
 6644 | LWLock          | ProcArray
(2 rows)

26.2.4. `pg_stat_replication`

The pg_stat_replication view will contain one row per WAL sender process, showing statistics about replication to that sender's connected standby server. Only directly connected standbys are listed; no information is available about downstream standby servers.

Table 26.14. pg_stat_replication View

Column Type Description
`pid` `integer` Process ID of a WAL sender process
`usesysid` `oid` OID of the user logged into this WAL sender process
`usename` `name` Name of the user logged into this WAL sender process
`application_name` `text` Name of the application that is connected to this WAL sender
`client_addr` `inet` IP address of the client connected to this WAL sender. If this field is null, it indicates that the client is connected via a Unix socket on the server machine.
`client_hostname` `text` Host name of the connected client, as reported by a reverse DNS lookup of `client_addr`. This field will only be non-null for IP connections, and only when log_hostname is enabled.
`client_port` `integer` TCP port number that the client is using for communication with this WAL sender, or `-1` if a Unix socket is used
`backend_start` `timestamp with time zone` Time when this process was started, i.e., when the client connected to this WAL sender
`backend_xmin` `xid` This standby's `xmin` horizon reported by hot_standby_feedback.
`state` `text` Current WAL sender state. Possible values are: `startup`: This WAL sender is starting up. `catchup`: This WAL sender's connected standby is catching up with the primary. `streaming`: This WAL sender is streaming changes after its connected standby server has caught up with the primary. `backup`: This WAL sender is sending a backup. `stopping`: This WAL sender is stopping.
`sent_lsn` `pg_lsn` Last write-ahead log location sent on this connection
`write_lsn` `pg_lsn` Last write-ahead log location written to disk by this standby server
`flush_lsn` `pg_lsn` Last write-ahead log location flushed to disk by this standby server
`replay_lsn` `pg_lsn` Last write-ahead log location replayed into the database on this standby server
`write_lag` `interval` Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written it (but not yet flushed it or applied it). This can be used to gauge the delay that `synchronous_commit` level `remote_write` incurred while committing if this server was configured as a synchronous standby.
`flush_lag` `interval` Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written and flushed it (but not yet applied it). This can be used to gauge the delay that `synchronous_commit` level `on` incurred while committing if this server was configured as a synchronous standby.
`replay_lag` `interval` Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written, flushed and applied it. This can be used to gauge the delay that `synchronous_commit` level `remote_apply` incurred while committing if this server was configured as a synchronous standby.
`sync_priority` `integer` Priority of this standby server for being chosen as the synchronous standby in a priority-based synchronous replication. This has no effect in a quorum-based synchronous replication.
`sync_state` `text` Synchronous state of this standby server. Possible values are: `async`: This standby server is asynchronous. `potential`: This standby server is now asynchronous, but can potentially become synchronous if one of current synchronous ones fails. `sync`: This standby server is synchronous. `quorum`: This standby server is considered as a candidate for quorum standbys.
`reply_time` `timestamp with time zone` Send time of last reply message received from standby server

Column Type

Description

pid integer

Process ID of a WAL sender process

usesysid oid

OID of the user logged into this WAL sender process

usename name

Name of the user logged into this WAL sender process

application_name text

Name of the application that is connected to this WAL sender

client_addr inet

IP address of the client connected to this WAL sender. If this field is null, it indicates that the client is connected via a Unix socket on the server machine.

client_hostname text

Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This field will only be non-null for IP connections, and only when log_hostname is enabled.

client_port integer

TCP port number that the client is using for communication with this WAL sender, or -1 if a Unix socket is used

backend_start timestamp with time zone

Time when this process was started, i.e., when the client connected to this WAL sender

backend_xmin xid

This standby's xmin horizon reported by hot_standby_feedback.

state text

Current WAL sender state. Possible values are:

startup: This WAL sender is starting up.
catchup: This WAL sender's connected standby is catching up with the primary.
streaming: This WAL sender is streaming changes after its connected standby server has caught up with the primary.
backup: This WAL sender is sending a backup.
stopping: This WAL sender is stopping.

sent_lsn pg_lsn

Last write-ahead log location sent on this connection

write_lsn pg_lsn

Last write-ahead log location written to disk by this standby server

flush_lsn pg_lsn

Last write-ahead log location flushed to disk by this standby server

replay_lsn pg_lsn

Last write-ahead log location replayed into the database on this standby server

write_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written it (but not yet flushed it or applied it). This can be used to gauge the delay that synchronous_commit level remote_write incurred while committing if this server was configured as a synchronous standby.

flush_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written and flushed it (but not yet applied it). This can be used to gauge the delay that synchronous_commit level on incurred while committing if this server was configured as a synchronous standby.

replay_lag interval

Time elapsed between flushing recent WAL locally and receiving notification that this standby server has written, flushed and applied it. This can be used to gauge the delay that synchronous_commit level remote_apply incurred while committing if this server was configured as a synchronous standby.

sync_priority integer

Priority of this standby server for being chosen as the synchronous standby in a priority-based synchronous replication. This has no effect in a quorum-based synchronous replication.

sync_state text

Synchronous state of this standby server. Possible values are:

async: This standby server is asynchronous.
potential: This standby server is now asynchronous, but can potentially become synchronous if one of current synchronous ones fails.
sync: This standby server is synchronous.
quorum: This standby server is considered as a candidate for quorum standbys.

reply_time timestamp with time zone

Send time of last reply message received from standby server

The lag times reported in the pg_stat_replication view are measurements of the time taken for recent WAL to be written, flushed and replayed and for the sender to know about it. These times represent the commit delay that was (or would have been) introduced by each synchronous commit level, if the remote server was configured as a synchronous standby. For an asynchronous standby, the replay_lag column approximates the delay before recent transactions became visible to queries. If the standby server has entirely caught up with the sending server and there is no more WAL activity, the most recently measured lag times will continue to be displayed for a short time and then show NULL.

Lag times work automatically for physical replication. Logical decoding plugins may optionally emit tracking messages; if they do not, the tracking mechanism will simply display NULL lag.

Note

The reported lag times are not predictions of how long it will take for the standby to catch up with the sending server assuming the current rate of replay. Such a system would show similar times while new WAL is being generated, but would differ when the sender becomes idle. In particular, when the standby has caught up completely, pg_stat_replication shows the time taken to write, flush and replay the most recent reported WAL location rather than zero as some users might expect. This is consistent with the goal of measuring synchronous commit and transaction visibility delays for recent write transactions. To reduce confusion for users expecting a different model of lag, the lag columns revert to NULL after a short time on a fully replayed idle system. Monitoring systems should choose whether to represent this as missing data, zero or continue to display the last known value.

26.2.5. `pg_stat_replication_slots`

The pg_stat_replication_slots view will contain one row per logical replication slot, showing statistics about its usage.

Table 26.15. pg_stat_replication_slots View

Column Type Description
`slot_name` `text` A unique, cluster-wide identifier for the replication slot
`spill_txns` `bigint` Number of transactions spilled to disk once the memory used by logical decoding to decode changes from WAL has exceeded `logical_decoding_work_mem`. The counter gets incremented for both top-level transactions and subtransactions.
`spill_count` `bigint` Number of times transactions were spilled to disk while decoding changes from WAL for this slot. This counter is incremented each time a transaction is spilled, and the same transaction may be spilled multiple times.
`spill_bytes` `bigint` Amount of decoded transaction data spilled to disk while performing decoding of changes from WAL for this slot. This and other spill counters can be used to gauge the I/O which occurred during logical decoding and allow tuning `logical_decoding_work_mem`.
`stream_txns` `bigint` Number of in-progress transactions streamed to the decoding output plugin after the memory used by logical decoding to decode changes from WAL for this slot has exceeded `logical_decoding_work_mem`. Streaming only works with top-level transactions (subtransactions can't be streamed independently), so the counter is not incremented for subtransactions.
`stream_countbigint` Number of times in-progress transactions were streamed to the decoding output plugin while decoding changes from WAL for this slot. This counter is incremented each time a transaction is streamed, and the same transaction may be streamed multiple times.
`stream_bytesbigint` Amount of transaction data decoded for streaming in-progress transactions to the decoding output plugin while decoding changes from WAL for this slot. This and other streaming counters for this slot can be used to tune `logical_decoding_work_mem`.
`total_txns` `bigint` Number of decoded transactions sent to the decoding output plugin for this slot. This counts top-level transactions only, and is not incremented for subtransactions. Note that this includes the transactions that are streamed and/or spilled.
`total_bytesbigint` Amount of transaction data decoded for sending transactions to the decoding output plugin while decoding changes from WAL for this slot. Note that this includes data that is streamed and/or spilled.
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

slot_name text

A unique, cluster-wide identifier for the replication slot

spill_txns bigint

Number of transactions spilled to disk once the memory used by logical decoding to decode changes from WAL has exceeded logical_decoding_work_mem. The counter gets incremented for both top-level transactions and subtransactions.

spill_count bigint

Number of times transactions were spilled to disk while decoding changes from WAL for this slot. This counter is incremented each time a transaction is spilled, and the same transaction may be spilled multiple times.

spill_bytes bigint

Amount of decoded transaction data spilled to disk while performing decoding of changes from WAL for this slot. This and other spill counters can be used to gauge the I/O which occurred during logical decoding and allow tuning logical_decoding_work_mem.

stream_txns bigint

Number of in-progress transactions streamed to the decoding output plugin after the memory used by logical decoding to decode changes from WAL for this slot has exceeded logical_decoding_work_mem. Streaming only works with top-level transactions (subtransactions can't be streamed independently), so the counter is not incremented for subtransactions.

stream_countbigint

Number of times in-progress transactions were streamed to the decoding output plugin while decoding changes from WAL for this slot. This counter is incremented each time a transaction is streamed, and the same transaction may be streamed multiple times.

stream_bytesbigint

Amount of transaction data decoded for streaming in-progress transactions to the decoding output plugin while decoding changes from WAL for this slot. This and other streaming counters for this slot can be used to tune logical_decoding_work_mem.

total_txns bigint

Number of decoded transactions sent to the decoding output plugin for this slot. This counts top-level transactions only, and is not incremented for subtransactions. Note that this includes the transactions that are streamed and/or spilled.

total_bytesbigint

Amount of transaction data decoded for sending transactions to the decoding output plugin while decoding changes from WAL for this slot. Note that this includes data that is streamed and/or spilled.

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.6. `pg_stat_wal_receiver`

The pg_stat_wal_receiver view will contain only one row, showing statistics about the WAL receiver from that receiver's connected server.

Table 26.16. pg_stat_wal_receiver View

Column Type Description
`pid` `integer` Process ID of the WAL receiver process
`status` `text` Activity status of the WAL receiver process
`receive_start_lsn` `pg_lsn` First write-ahead log location used when WAL receiver is started
`receive_start_tli` `integer` First timeline number used when WAL receiver is started
`written_lsn` `pg_lsn` Last write-ahead log location already received and written to disk, but not flushed. This should not be used for data integrity checks.
`flushed_lsn` `pg_lsn` Last write-ahead log location already received and flushed to disk, the initial value of this field being the first log location used when WAL receiver is started
`received_tli` `integer` Timeline number of last write-ahead log location received and flushed to disk, the initial value of this field being the timeline number of the first log location used when WAL receiver is started
`last_msg_send_time` `timestamp with time zone` Send time of last message received from origin WAL sender
`last_msg_receipt_time` `timestamp with time zone` Receipt time of last message received from origin WAL sender
`latest_end_lsn` `pg_lsn` Last write-ahead log location reported to origin WAL sender
`latest_end_time` `timestamp with time zone` Time of last write-ahead log location reported to origin WAL sender
`slot_name` `text` Replication slot name used by this WAL receiver
`sender_host` `text` Host of the Postgres Pro instance this WAL receiver is connected to. This can be a host name, an IP address, or a directory path if the connection is via Unix socket. (The path case can be distinguished because it will always be an absolute path, beginning with `/`.)
`sender_port` `integer` Port number of the Postgres Pro instance this WAL receiver is connected to.
`conninfo` `text` Connection string used by this WAL receiver, with security-sensitive fields obfuscated.

Column Type

Description

pid integer

Process ID of the WAL receiver process

status text

Activity status of the WAL receiver process

receive_start_lsn pg_lsn

First write-ahead log location used when WAL receiver is started

receive_start_tli integer

First timeline number used when WAL receiver is started

written_lsn pg_lsn

Last write-ahead log location already received and written to disk, but not flushed. This should not be used for data integrity checks.

flushed_lsn pg_lsn

Last write-ahead log location already received and flushed to disk, the initial value of this field being the first log location used when WAL receiver is started

received_tli integer

Timeline number of last write-ahead log location received and flushed to disk, the initial value of this field being the timeline number of the first log location used when WAL receiver is started

last_msg_send_time timestamp with time zone

Send time of last message received from origin WAL sender

last_msg_receipt_time timestamp with time zone

Receipt time of last message received from origin WAL sender

latest_end_lsn pg_lsn

Last write-ahead log location reported to origin WAL sender

latest_end_time timestamp with time zone

Time of last write-ahead log location reported to origin WAL sender

slot_name text

Replication slot name used by this WAL receiver

sender_host text

Host of the Postgres Pro instance this WAL receiver is connected to. This can be a host name, an IP address, or a directory path if the connection is via Unix socket. (The path case can be distinguished because it will always be an absolute path, beginning with /.)

sender_port integer

Port number of the Postgres Pro instance this WAL receiver is connected to.

conninfo text

Connection string used by this WAL receiver, with security-sensitive fields obfuscated.

26.2.7. `pg_stat_subscription`

The pg_stat_subscription view will contain one row per subscription for main worker (with null PID if the worker is not running), and additional rows for workers handling the initial data copy of the subscribed tables.

Table 26.17. pg_stat_subscription View

Column Type Description
`subid` `oid` OID of the subscription
`subname` `name` Name of the subscription
`pid` `integer` Process ID of the subscription worker process
`relid` `oid` OID of the relation that the worker is synchronizing; null for the main apply worker
`received_lsn` `pg_lsn` Last write-ahead log location received, the initial value of this field being 0
`last_msg_send_time` `timestamp with time zone` Send time of last message received from origin WAL sender
`last_msg_receipt_time` `timestamp with time zone` Receipt time of last message received from origin WAL sender
`latest_end_lsn` `pg_lsn` Last write-ahead log location reported to origin WAL sender
`latest_end_time` `timestamp with time zone` Time of last write-ahead log location reported to origin WAL sender

Column Type

Description

subid oid

OID of the subscription

subname name

Name of the subscription

pid integer

Process ID of the subscription worker process

relid oid

OID of the relation that the worker is synchronizing; null for the main apply worker

received_lsn pg_lsn

Last write-ahead log location received, the initial value of this field being 0

last_msg_send_time timestamp with time zone

Send time of last message received from origin WAL sender

last_msg_receipt_time timestamp with time zone

Receipt time of last message received from origin WAL sender

latest_end_lsn pg_lsn

Last write-ahead log location reported to origin WAL sender

latest_end_time timestamp with time zone

Time of last write-ahead log location reported to origin WAL sender

26.2.8. `pg_stat_ssl`

The pg_stat_ssl view will contain one row per backend or WAL sender process, showing statistics about SSL usage on this connection. It can be joined to pg_stat_activity or pg_stat_replication on the pid column to get more details about the connection.

Table 26.18. pg_stat_ssl View

Column Type Description
`pid` `integer` Process ID of a backend or WAL sender process
`ssl` `boolean` True if SSL is used on this connection
`version` `text` Version of SSL in use, or NULL if SSL is not in use on this connection
`cipher` `text` Name of SSL cipher in use, or NULL if SSL is not in use on this connection
`bits` `integer` Number of bits in the encryption algorithm used, or NULL if SSL is not used on this connection
`client_dn` `text` Distinguished Name (DN) field from the client certificate used, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated if the DN field is longer than `NAMEDATALEN` (64 characters in a standard build).
`client_serial` `numeric` Serial number of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. The combination of certificate serial number and certificate issuer uniquely identifies a certificate (unless the issuer erroneously reuses serial numbers).
`issuer_dn` `text` DN of the issuer of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated like `client_dn`.

Column Type

Description

pid integer

Process ID of a backend or WAL sender process

ssl boolean

True if SSL is used on this connection

version text

Version of SSL in use, or NULL if SSL is not in use on this connection

cipher text

Name of SSL cipher in use, or NULL if SSL is not in use on this connection

bits integer

Number of bits in the encryption algorithm used, or NULL if SSL is not used on this connection

client_dn text

Distinguished Name (DN) field from the client certificate used, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated if the DN field is longer than NAMEDATALEN (64 characters in a standard build).

client_serial numeric

Serial number of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. The combination of certificate serial number and certificate issuer uniquely identifies a certificate (unless the issuer erroneously reuses serial numbers).

issuer_dn text

DN of the issuer of the client certificate, or NULL if no client certificate was supplied or if SSL is not in use on this connection. This field is truncated like client_dn.

26.2.9. `pg_stat_gssapi`

The pg_stat_gssapi view will contain one row per backend, showing information about GSSAPI usage on this connection. It can be joined to pg_stat_activity or pg_stat_replication on the pid column to get more details about the connection.

Table 26.19. pg_stat_gssapi View

Column Type Description
`pid` `integer` Process ID of a backend
`gss_authenticated` `boolean` True if GSSAPI authentication was used for this connection
`principal` `text` Principal used to authenticate this connection, or NULL if GSSAPI was not used to authenticate this connection. This field is truncated if the principal is longer than `NAMEDATALEN` (64 characters in a standard build).
`encrypted` `boolean` True if GSSAPI encryption is in use on this connection

Column Type

Description

pid integer

Process ID of a backend

gss_authenticated boolean

True if GSSAPI authentication was used for this connection

principal text

Principal used to authenticate this connection, or NULL if GSSAPI was not used to authenticate this connection. This field is truncated if the principal is longer than NAMEDATALEN (64 characters in a standard build).

encrypted boolean

True if GSSAPI encryption is in use on this connection

26.2.10. `pg_stat_archiver`

The pg_stat_archiver view will always have a single row, containing data about the archiver process of the cluster.

Table 26.20. pg_stat_archiver View

Column Type Description
`archived_count` `bigint` Number of WAL files that have been successfully archived
`last_archived_wal` `text` Name of the last WAL file successfully archived
`last_archived_time` `timestamp with time zone` Time of the last successful archive operation
`failed_count` `bigint` Number of failed attempts for archiving WAL files
`last_failed_wal` `text` Name of the WAL file of the last failed archival operation
`last_failed_time` `timestamp with time zone` Time of the last failed archival operation
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

archived_count bigint

Number of WAL files that have been successfully archived

last_archived_wal text

Name of the last WAL file successfully archived

last_archived_time timestamp with time zone

Time of the last successful archive operation

failed_count bigint

Number of failed attempts for archiving WAL files

last_failed_wal text

Name of the WAL file of the last failed archival operation

last_failed_time timestamp with time zone

Time of the last failed archival operation

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.11. `pg_stat_bgwriter`

The pg_stat_bgwriter view will always have a single row, containing global data for the cluster.

Table 26.21. pg_stat_bgwriter View

Column Type Description
`checkpoints_timed` `bigint` Number of scheduled checkpoints that have been performed
`checkpoints_req` `bigint` Number of requested checkpoints that have been performed
`checkpoint_write_time` `double precision` Total amount of time that has been spent in the portion of checkpoint processing where files are written to disk, in milliseconds
`checkpoint_sync_time` `double precision` Total amount of time that has been spent in the portion of checkpoint processing where files are synchronized to disk, in milliseconds
`buffers_checkpoint` `bigint` Number of buffers written during checkpoints
`buffers_clean` `bigint` Number of buffers written by the background writer
`maxwritten_clean` `bigint` Number of times the background writer stopped a cleaning scan because it had written too many buffers
`buffers_backend` `bigint` Number of buffers written directly by a backend
`buffers_backend_fsync` `bigint` Number of times a backend had to execute its own `fsync` call (normally the background writer handles those even when the backend does its own write)
`buffers_alloc` `bigint` Number of buffers allocated
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

checkpoints_timed bigint

Number of scheduled checkpoints that have been performed

checkpoints_req bigint

Number of requested checkpoints that have been performed

checkpoint_write_time double precision

Total amount of time that has been spent in the portion of checkpoint processing where files are written to disk, in milliseconds

checkpoint_sync_time double precision

Total amount of time that has been spent in the portion of checkpoint processing where files are synchronized to disk, in milliseconds

buffers_checkpoint bigint

Number of buffers written during checkpoints

buffers_clean bigint

Number of buffers written by the background writer

maxwritten_clean bigint

Number of times the background writer stopped a cleaning scan because it had written too many buffers

buffers_backend bigint

Number of buffers written directly by a backend

buffers_backend_fsync bigint

Number of times a backend had to execute its own fsync call (normally the background writer handles those even when the backend does its own write)

buffers_alloc bigint

Number of buffers allocated

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.12. `pg_stat_wal`

The pg_stat_wal view will always have a single row, containing data about WAL activity of the cluster.

Table 26.22. pg_stat_wal View

Column Type Description
`wal_records` `bigint` Total number of WAL records generated
`wal_fpi` `bigint` Total number of WAL full page images generated
`wal_bytes` `numeric` Total amount of WAL generated in bytes
`wal_buffers_full` `bigint` Number of times WAL data was written to disk because WAL buffers became full
`wal_write` `bigint` Number of times WAL buffers were written out to disk via `XLogWrite` request. See Section 28.5 for more information about the internal WAL function `XLogWrite`.
`wal_sync` `bigint` Number of times WAL files were synced to disk via `issue_xlog_fsync` request (if fsync is `on` and wal_sync_method is either `fdatasync`, `fsync` or `fsync_writethrough`, otherwise zero). See Section 28.5 for more information about the internal WAL function `issue_xlog_fsync`.
`wal_write_time` `double precision` Total amount of time spent writing WAL buffers to disk via `XLogWrite` request, in milliseconds (if track_wal_io_timing is enabled, otherwise zero). This includes the sync time when `wal_sync_method` is either `open_datasync` or `open_sync`.
`wal_sync_time` `double precision` Total amount of time spent syncing WAL files to disk via `issue_xlog_fsync` request, in milliseconds (if `track_wal_io_timing` is enabled, `fsync` is `on`, and `wal_sync_method` is either `fdatasync`, `fsync` or `fsync_writethrough`, otherwise zero).
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

wal_records bigint

Total number of WAL records generated

wal_fpi bigint

Total number of WAL full page images generated

wal_bytes numeric

Total amount of WAL generated in bytes

wal_buffers_full bigint

Number of times WAL data was written to disk because WAL buffers became full

wal_write bigint

Number of times WAL buffers were written out to disk via XLogWrite request. See Section 28.5 for more information about the internal WAL function XLogWrite.

wal_sync bigint

Number of times WAL files were synced to disk via issue_xlog_fsync request (if fsync is on and wal_sync_method is either fdatasync, fsync or fsync_writethrough, otherwise zero). See Section 28.5 for more information about the internal WAL function issue_xlog_fsync.

wal_write_time double precision

Total amount of time spent writing WAL buffers to disk via XLogWrite request, in milliseconds (if track_wal_io_timing is enabled, otherwise zero). This includes the sync time when wal_sync_method is either open_datasync or open_sync.

wal_sync_time double precision

Total amount of time spent syncing WAL files to disk via issue_xlog_fsync request, in milliseconds (if track_wal_io_timing is enabled, fsync is on, and wal_sync_method is either fdatasync, fsync or fsync_writethrough, otherwise zero).

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.13. `pg_stat_database`

The pg_stat_database view will contain one row for each database in the cluster, plus one for shared objects, showing database-wide statistics.

Table 26.23. pg_stat_database View

Column Type Description
`datid` `oid` OID of this database, or 0 for objects belonging to a shared relation
`datname` `name` Name of this database, or `NULL` for shared objects.
`numbackends` `integer` Number of backends currently connected to this database, or `NULL` for shared objects. This is the only column in this view that returns a value reflecting current state; all other columns return the accumulated values since the last reset.
`xact_commit` `bigint` Number of transactions in this database that have been committed
`xact_rollback` `bigint` Number of transactions in this database that have been rolled back
`blks_read` `bigint` Number of disk blocks read in this database
`blks_hit` `bigint` Number of times disk blocks were found already in the buffer cache, so that a read was not necessary (this only includes hits in the Postgres Pro buffer cache, not the operating system's file system cache)
`tup_returned` `bigint` Number of rows returned by queries in this database
`tup_fetched` `bigint` Number of rows fetched by queries in this database
`tup_inserted` `bigint` Number of rows inserted by queries in this database
`tup_updated` `bigint` Number of rows updated by queries in this database
`tup_deleted` `bigint` Number of rows deleted by queries in this database
`conflicts` `bigint` Number of queries canceled due to conflicts with recovery in this database. (Conflicts occur only on standby servers; see `pg_stat_database_conflicts` for details.)
`temp_files` `bigint` Number of temporary files created by queries in this database. All temporary files are counted, regardless of why the temporary file was created (e.g., sorting or hashing), and regardless of the log_temp_files setting.
`temp_bytes` `bigint` Total amount of data written to temporary files by queries in this database. All temporary files are counted, regardless of why the temporary file was created, and regardless of the log_temp_files setting.
`deadlocks` `bigint` Number of deadlocks detected in this database
`checksum_failures` `bigint` Number of data page checksum failures detected in this database (or on a shared object), or NULL if data checksums are not enabled.
`checksum_last_failure` `timestamp with time zone` Time at which the last data page checksum failure was detected in this database (or on a shared object), or NULL if data checksums are not enabled.
`blk_read_time` `double precision` Time spent reading data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)
`blk_write_time` `double precision` Time spent writing data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)
`session_time` `double precision` Time spent by database sessions in this database, in milliseconds (note that statistics are only updated when the state of a session changes, so if sessions have been idle for a long time, this idle time won't be included)
`active_time` `double precision` Time spent executing SQL statements in this database, in milliseconds (this corresponds to the states `active` and `fastpath function call` in `pg_stat_activity`)
`idle_in_transaction_time` `double precision` Time spent idling while in a transaction in this database, in milliseconds (this corresponds to the states `idle in transaction` and `idle in transaction (aborted)` in `pg_stat_activity`)
`sessions` `bigint` Total number of sessions established to this database
`sessions_abandoned` `bigint` Number of database sessions to this database that were terminated because connection to the client was lost
`sessions_fatal` `bigint` Number of database sessions to this database that were terminated by fatal errors
`sessions_killed` `bigint` Number of database sessions to this database that were terminated by operator intervention
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

datid oid

OID of this database, or 0 for objects belonging to a shared relation

datname name

Name of this database, or NULL for shared objects.

numbackends integer

Number of backends currently connected to this database, or NULL for shared objects. This is the only column in this view that returns a value reflecting current state; all other columns return the accumulated values since the last reset.

xact_commit bigint

Number of transactions in this database that have been committed

xact_rollback bigint

Number of transactions in this database that have been rolled back

blks_read bigint

Number of disk blocks read in this database

blks_hit bigint

Number of times disk blocks were found already in the buffer cache, so that a read was not necessary (this only includes hits in the Postgres Pro buffer cache, not the operating system's file system cache)

tup_returned bigint

Number of rows returned by queries in this database

tup_fetched bigint

Number of rows fetched by queries in this database

tup_inserted bigint

Number of rows inserted by queries in this database

tup_updated bigint

Number of rows updated by queries in this database

tup_deleted bigint

Number of rows deleted by queries in this database

conflicts bigint

Number of queries canceled due to conflicts with recovery in this database. (Conflicts occur only on standby servers; see pg_stat_database_conflicts for details.)

temp_files bigint

Number of temporary files created by queries in this database. All temporary files are counted, regardless of why the temporary file was created (e.g., sorting or hashing), and regardless of the log_temp_files setting.

temp_bytes bigint

Total amount of data written to temporary files by queries in this database. All temporary files are counted, regardless of why the temporary file was created, and regardless of the log_temp_files setting.

deadlocks bigint

Number of deadlocks detected in this database

checksum_failures bigint

Number of data page checksum failures detected in this database (or on a shared object), or NULL if data checksums are not enabled.

checksum_last_failure timestamp with time zone

Time at which the last data page checksum failure was detected in this database (or on a shared object), or NULL if data checksums are not enabled.

blk_read_time double precision

Time spent reading data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)

blk_write_time double precision

Time spent writing data file blocks by backends in this database, in milliseconds (if track_io_timing is enabled, otherwise zero)

session_time double precision

Time spent by database sessions in this database, in milliseconds (note that statistics are only updated when the state of a session changes, so if sessions have been idle for a long time, this idle time won't be included)

active_time double precision

Time spent executing SQL statements in this database, in milliseconds (this corresponds to the states active and fastpath function call in pg_stat_activity)

idle_in_transaction_time double precision

Time spent idling while in a transaction in this database, in milliseconds (this corresponds to the states idle in transaction and idle in transaction (aborted) in pg_stat_activity)

sessions bigint

Total number of sessions established to this database

sessions_abandoned bigint

Number of database sessions to this database that were terminated because connection to the client was lost

sessions_fatal bigint

Number of database sessions to this database that were terminated by fatal errors

sessions_killed bigint

Number of database sessions to this database that were terminated by operator intervention

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.14. `pg_stat_database_conflicts`

The pg_stat_database_conflicts view will contain one row per database, showing database-wide statistics about query cancels occurring due to conflicts with recovery on standby servers. This view will only contain information on standby servers, since conflicts do not occur on primary servers.

Table 26.24. pg_stat_database_conflicts View

Column Type Description
`datid` `oid` OID of a database
`datname` `name` Name of this database
`confl_tablespace` `bigint` Number of queries in this database that have been canceled due to dropped tablespaces
`confl_lock` `bigint` Number of queries in this database that have been canceled due to lock timeouts
`confl_snapshot` `bigint` Number of queries in this database that have been canceled due to old snapshots
`confl_bufferpin` `bigint` Number of queries in this database that have been canceled due to pinned buffers
`confl_deadlock` `bigint` Number of queries in this database that have been canceled due to deadlocks

Column Type

Description

datid oid

OID of a database

datname name

Name of this database

confl_tablespace bigint

Number of queries in this database that have been canceled due to dropped tablespaces

confl_lock bigint

Number of queries in this database that have been canceled due to lock timeouts

confl_snapshot bigint

Number of queries in this database that have been canceled due to old snapshots

confl_bufferpin bigint

Number of queries in this database that have been canceled due to pinned buffers

confl_deadlock bigint

Number of queries in this database that have been canceled due to deadlocks

26.2.15. `pg_stat_all_tables`

The pg_stat_all_tables view will contain one row for each table in the current database (including TOAST tables), showing statistics about accesses to that specific table. The pg_stat_user_tables and pg_stat_sys_tables views contain the same information, but filtered to only show user and system tables respectively.

Table 26.25. pg_stat_all_tables View

Column Type Description
`relid` `oid` OID of a table
`schemaname` `name` Name of the schema that this table is in
`relname` `name` Name of this table
`seq_scan` `bigint` Number of sequential scans initiated on this table
`seq_tup_read` `bigint` Number of live rows fetched by sequential scans
`idx_scan` `bigint` Number of index scans initiated on this table
`idx_tup_fetch` `bigint` Number of live rows fetched by index scans
`n_tup_ins` `bigint` Number of rows inserted
`n_tup_upd` `bigint` Number of rows updated (includes HOT updated rows)
`n_tup_del` `bigint` Number of rows deleted
`n_tup_hot_upd` `bigint` Number of rows HOT updated (i.e., with no separate index update required)
`n_live_tup` `bigint` Estimated number of live rows
`n_dead_tup` `bigint` Estimated number of dead rows
`n_mod_since_analyze` `bigint` Estimated number of rows modified since this table was last analyzed
`n_ins_since_vacuum` `bigint` Estimated number of rows inserted since this table was last vacuumed
`last_vacuum` `timestamp with time zone` Last time at which this table was manually vacuumed (not counting `VACUUM FULL`)
`last_autovacuum` `timestamp with time zone` Last time at which this table was vacuumed by the autovacuum daemon
`last_analyze` `timestamp with time zone` Last time at which this table was manually analyzed
`last_autoanalyze` `timestamp with time zone` Last time at which this table was analyzed by the autovacuum daemon
`vacuum_count` `bigint` Number of times this table has been manually vacuumed (not counting `VACUUM FULL`)
`autovacuum_count` `bigint` Number of times this table has been vacuumed by the autovacuum daemon
`analyze_count` `bigint` Number of times this table has been manually analyzed
`autoanalyze_count` `bigint` Number of times this table has been analyzed by the autovacuum daemon

Column Type

Description

relid oid

OID of a table

schemaname name

Name of the schema that this table is in

relname name

Name of this table

seq_scan bigint

Number of sequential scans initiated on this table

seq_tup_read bigint

Number of live rows fetched by sequential scans

idx_scan bigint

Number of index scans initiated on this table

idx_tup_fetch bigint

Number of live rows fetched by index scans

n_tup_ins bigint

Number of rows inserted

n_tup_upd bigint

Number of rows updated (includes HOT updated rows)

n_tup_del bigint

Number of rows deleted

n_tup_hot_upd bigint

Number of rows HOT updated (i.e., with no separate index update required)

n_live_tup bigint

Estimated number of live rows

n_dead_tup bigint

Estimated number of dead rows

n_mod_since_analyze bigint

Estimated number of rows modified since this table was last analyzed

n_ins_since_vacuum bigint

Estimated number of rows inserted since this table was last vacuumed

last_vacuum timestamp with time zone

Last time at which this table was manually vacuumed (not counting VACUUM FULL)

last_autovacuum timestamp with time zone

Last time at which this table was vacuumed by the autovacuum daemon

last_analyze timestamp with time zone

Last time at which this table was manually analyzed

last_autoanalyze timestamp with time zone

Last time at which this table was analyzed by the autovacuum daemon

vacuum_count bigint

Number of times this table has been manually vacuumed (not counting VACUUM FULL)

autovacuum_count bigint

Number of times this table has been vacuumed by the autovacuum daemon

analyze_count bigint

Number of times this table has been manually analyzed

autoanalyze_count bigint

Number of times this table has been analyzed by the autovacuum daemon

26.2.16. `pg_stat_all_indexes`

The pg_stat_all_indexes view will contain one row for each index in the current database, showing statistics about accesses to that specific index. The pg_stat_user_indexes and pg_stat_sys_indexes views contain the same information, but filtered to only show user and system indexes respectively.

Table 26.26. pg_stat_all_indexes View

Column Type Description
`relid` `oid` OID of the table for this index
`indexrelid` `oid` OID of this index
`schemaname` `name` Name of the schema this index is in
`relname` `name` Name of the table for this index
`indexrelname` `name` Name of this index
`idx_scan` `bigint` Number of index scans initiated on this index
`idx_tup_read` `bigint` Number of index entries returned by scans on this index
`idx_tup_fetch` `bigint` Number of live table rows fetched by simple index scans using this index

Column Type

Description

relid oid

OID of the table for this index

indexrelid oid

OID of this index

schemaname name

Name of the schema this index is in

relname name

Name of the table for this index

indexrelname name

Name of this index

idx_scan bigint

Number of index scans initiated on this index

idx_tup_read bigint

Number of index entries returned by scans on this index

idx_tup_fetch bigint

Number of live table rows fetched by simple index scans using this index

Indexes can be used by simple index scans, “bitmap” index scans, and the optimizer. In a bitmap scan the output of several indexes can be combined via AND or OR rules, so it is difficult to associate individual heap row fetches with specific indexes when a bitmap scan is used. Therefore, a bitmap scan increments the pg_stat_all_indexes.idx_tup_read count(s) for the index(es) it uses, and it increments the pg_stat_all_tables.idx_tup_fetch count for the table, but it does not affect pg_stat_all_indexes.idx_tup_fetch. The optimizer also accesses indexes to check for supplied constants whose values are outside the recorded range of the optimizer statistics because the optimizer statistics might be stale.

Note

The idx_tup_read and idx_tup_fetch counts can be different even without any use of bitmap scans, because idx_tup_read counts index entries retrieved from the index while idx_tup_fetch counts live rows fetched from the table. The latter will be less if any dead or not-yet-committed rows are fetched using the index, or if any heap fetches are avoided by means of an index-only scan.

26.2.17. `pg_statio_all_tables`

The pg_statio_all_tables view will contain one row for each table in the current database (including TOAST tables), showing statistics about I/O on that specific table. The pg_statio_user_tables and pg_statio_sys_tables views contain the same information, but filtered to only show user and system tables respectively.

Table 26.27. pg_statio_all_tables View

Column Type Description
`relid` `oid` OID of a table
`schemaname` `name` Name of the schema that this table is in
`relname` `name` Name of this table
`heap_blks_read` `bigint` Number of disk blocks read from this table
`heap_blks_hit` `bigint` Number of buffer hits in this table
`idx_blks_read` `bigint` Number of disk blocks read from all indexes on this table
`idx_blks_hit` `bigint` Number of buffer hits in all indexes on this table
`toast_blks_read` `bigint` Number of disk blocks read from this table's TOAST table (if any)
`toast_blks_hit` `bigint` Number of buffer hits in this table's TOAST table (if any)
`tidx_blks_read` `bigint` Number of disk blocks read from this table's TOAST table indexes (if any)
`tidx_blks_hit` `bigint` Number of buffer hits in this table's TOAST table indexes (if any)

Column Type

Description

relid oid

OID of a table

schemaname name

Name of the schema that this table is in

relname name

Name of this table

heap_blks_read bigint

Number of disk blocks read from this table

heap_blks_hit bigint

Number of buffer hits in this table

idx_blks_read bigint

Number of disk blocks read from all indexes on this table

idx_blks_hit bigint

Number of buffer hits in all indexes on this table

toast_blks_read bigint

Number of disk blocks read from this table's TOAST table (if any)

toast_blks_hit bigint

Number of buffer hits in this table's TOAST table (if any)

tidx_blks_read bigint

Number of disk blocks read from this table's TOAST table indexes (if any)

tidx_blks_hit bigint

Number of buffer hits in this table's TOAST table indexes (if any)

26.2.18. `pg_statio_all_indexes`

The pg_statio_all_indexes view will contain one row for each index in the current database, showing statistics about I/O on that specific index. The pg_statio_user_indexes and pg_statio_sys_indexes views contain the same information, but filtered to only show user and system indexes respectively.

Table 26.28. pg_statio_all_indexes View

Column Type Description
`relid` `oid` OID of the table for this index
`indexrelid` `oid` OID of this index
`schemaname` `name` Name of the schema this index is in
`relname` `name` Name of the table for this index
`indexrelname` `name` Name of this index
`idx_blks_read` `bigint` Number of disk blocks read from this index
`idx_blks_hit` `bigint` Number of buffer hits in this index

Column Type

Description

relid oid

OID of the table for this index

indexrelid oid

OID of this index

schemaname name

Name of the schema this index is in

relname name

Name of the table for this index

indexrelname name

Name of this index

idx_blks_read bigint

Number of disk blocks read from this index

idx_blks_hit bigint

Number of buffer hits in this index

26.2.19. `pg_statio_all_sequences`

The pg_statio_all_sequences view will contain one row for each sequence in the current database, showing statistics about I/O on that specific sequence.

Table 26.29. pg_statio_all_sequences View

Column Type Description
`relid` `oid` OID of a sequence
`schemaname` `name` Name of the schema this sequence is in
`relname` `name` Name of this sequence
`blks_read` `bigint` Number of disk blocks read from this sequence
`blks_hit` `bigint` Number of buffer hits in this sequence

Column Type

Description

relid oid

OID of a sequence

schemaname name

Name of the schema this sequence is in

relname name

Name of this sequence

blks_read bigint

Number of disk blocks read from this sequence

blks_hit bigint

Number of buffer hits in this sequence

26.2.20. `pg_stat_user_functions`

The pg_stat_user_functions view will contain one row for each tracked function, showing statistics about executions of that function. The track_functions parameter controls exactly which functions are tracked.

Table 26.30. pg_stat_user_functions View

Column Type Description
`funcid` `oid` OID of a function
`schemaname` `name` Name of the schema this function is in
`funcname` `name` Name of this function
`calls` `bigint` Number of times this function has been called
`total_time` `double precision` Total time spent in this function and all other functions called by it, in milliseconds
`self_time` `double precision` Total time spent in this function itself, not including other functions called by it, in milliseconds

Column Type

Description

funcid oid

OID of a function

schemaname name

Name of the schema this function is in

funcname name

Name of this function

calls bigint

Number of times this function has been called

total_time double precision

Total time spent in this function and all other functions called by it, in milliseconds

self_time double precision

Total time spent in this function itself, not including other functions called by it, in milliseconds

26.2.21. `pg_stat_slru`

Postgres Pro accesses certain on-disk information via SLRU (simple least-recently-used) caches. The pg_stat_slru view will contain one row for each tracked SLRU cache, showing statistics about access to cached pages.

Table 26.31. pg_stat_slru View

Column Type Description
`name` `text` Name of the SLRU
`blks_zeroed` `bigint` Number of blocks zeroed during initializations
`blks_hit` `bigint` Number of times disk blocks were found already in the SLRU, so that a read was not necessary (this only includes hits in the SLRU, not the operating system's file system cache)
`blks_read` `bigint` Number of disk blocks read for this SLRU
`blks_written` `bigint` Number of disk blocks written for this SLRU
`blks_exists` `bigint` Number of blocks checked for existence for this SLRU
`flushes` `bigint` Number of flushes of dirty data for this SLRU
`truncates` `bigint` Number of truncates for this SLRU
`stats_reset` `timestamp with time zone` Time at which these statistics were last reset

Column Type

Description

name text

Name of the SLRU

blks_zeroed bigint

Number of blocks zeroed during initializations

blks_hit bigint

Number of times disk blocks were found already in the SLRU, so that a read was not necessary (this only includes hits in the SLRU, not the operating system's file system cache)

blks_read bigint

Number of disk blocks read for this SLRU

blks_written bigint

Number of disk blocks written for this SLRU

blks_exists bigint

Number of blocks checked for existence for this SLRU

flushes bigint

Number of flushes of dirty data for this SLRU

truncates bigint

Number of truncates for this SLRU

stats_reset timestamp with time zone

Time at which these statistics were last reset

26.2.22. Statistics Functions

Other ways of looking at the statistics can be set up by writing queries that use the same underlying statistics access functions used by the standard views shown above. For details such as the functions' names, consult the definitions of the standard views. (For example, in psql you could issue \d+ pg_stat_activity.) The access functions for per-database statistics take a database OID as an argument to identify which database to report on. The per-table and per-index functions take a table or index OID. The functions for per-function statistics take a function OID. Note that only tables, indexes, and functions in the current database can be seen with these functions.

Additional functions related to statistics collection are listed in Table 26.32.

Table 26.32. Additional Statistics Functions

Function Description
`pg_backend_pid` () → `integer` Returns the process ID of the server process attached to the current session.
`pg_stat_get_activity` ( `integer` ) → `setof record` Returns a record of information about the backend with the specified process ID, or one record for each active backend in the system if `NULL` is specified. The fields returned are a subset of those in the `pg_stat_activity` view.
`pg_stat_get_snapshot_timestamp` () → `timestamp with time zone` Returns the timestamp of the current statistics snapshot.
`pg_stat_get_xact_blocks_fetched` ( `oid` ) → `bigint` Returns the number of block read requests for table or index, in the current transaction. This number minus `pg_stat_get_xact_blocks_hit` gives the number of kernel `read()` calls; the number of actual physical reads is usually lower due to kernel-level buffering.
`pg_stat_get_xact_blocks_hit` ( `oid` ) → `bigint` Returns the number of block read requests for table or index, in the current transaction, found in cache (not triggering kernel `read()` calls).
`pg_stat_clear_snapshot` () → `void` Discards the current statistics snapshot.
`pg_stat_reset` () → `void` Resets all statistics counters for the current database to zero. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_stat_reset_shared` ( `text` ) → `void` Resets some cluster-wide statistics counters to zero, depending on the argument. The argument can be `bgwriter` to reset all the counters shown in the `pg_stat_bgwriter` view, `archiver` to reset all the counters shown in the `pg_stat_archiver` view or `wal` to reset all the counters shown in the `pg_stat_wal` view. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_stat_reset_single_table_counters` ( `oid` ) → `void` Resets statistics for a single table or index in the current database to zero. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_stat_reset_single_function_counters` ( `oid` ) → `void` Resets statistics for a single function in the current database to zero. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_stat_reset_slru` ( `text` ) → `void` Resets statistics to zero for a single SLRU cache, or for all SLRUs in the cluster. If the argument is NULL, all counters shown in the `pg_stat_slru` view for all SLRU caches are reset. The argument can be one of `CommitTs`, `MultiXactMember`, `MultiXactOffset`, `Notify`, `Serial`, `Subtrans`, or `Xact` to reset the counters for only that entry. If the argument is `other` (or indeed, any unrecognized name), then the counters for all other SLRU caches, such as extension-defined caches, are reset. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_stat_reset_replication_slot` ( `text` ) → `void` Resets statistics of the replication slot defined by the argument. If the argument is `NULL`, resets statistics for all the replication slots. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

Function

Description

pg_backend_pid () → integer

Returns the process ID of the server process attached to the current session.

pg_stat_get_activity ( integer ) → setof record

Returns a record of information about the backend with the specified process ID, or one record for each active backend in the system if NULL is specified. The fields returned are a subset of those in the pg_stat_activity view.

pg_stat_get_snapshot_timestamp () → timestamp with time zone

Returns the timestamp of the current statistics snapshot.

pg_stat_get_xact_blocks_fetched ( oid ) → bigint

Returns the number of block read requests for table or index, in the current transaction. This number minus pg_stat_get_xact_blocks_hit gives the number of kernel read() calls; the number of actual physical reads is usually lower due to kernel-level buffering.

pg_stat_get_xact_blocks_hit ( oid ) → bigint

Returns the number of block read requests for table or index, in the current transaction, found in cache (not triggering kernel read() calls).

pg_stat_clear_snapshot () → void

Discards the current statistics snapshot.

pg_stat_reset () → void

Resets all statistics counters for the current database to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_shared ( text ) → void

Resets some cluster-wide statistics counters to zero, depending on the argument. The argument can be bgwriter to reset all the counters shown in the pg_stat_bgwriter view, archiver to reset all the counters shown in the pg_stat_archiver view or wal to reset all the counters shown in the pg_stat_wal view.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_single_table_counters ( oid ) → void

Resets statistics for a single table or index in the current database to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_single_function_counters ( oid ) → void

Resets statistics for a single function in the current database to zero.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_slru ( text ) → void

Resets statistics to zero for a single SLRU cache, or for all SLRUs in the cluster. If the argument is NULL, all counters shown in the pg_stat_slru view for all SLRU caches are reset. The argument can be one of CommitTs, MultiXactMember, MultiXactOffset, Notify, Serial, Subtrans, or Xact to reset the counters for only that entry. If the argument is other (or indeed, any unrecognized name), then the counters for all other SLRU caches, such as extension-defined caches, are reset.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_stat_reset_replication_slot ( text ) → void

Resets statistics of the replication slot defined by the argument. If the argument is NULL, resets statistics for all the replication slots.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

Warning

Using pg_stat_reset() also resets counters that autovacuum uses to determine when to trigger a vacuum or an analyze. Resetting these counters can cause autovacuum to not perform necessary work, which can cause problems such as table bloat or out-dated table statistics. A database-wide ANALYZE is recommended after the statistics have been reset.

pg_stat_get_activity, the underlying function of the pg_stat_activity view, returns a set of records containing all the available information about each backend process. Sometimes it may be more convenient to obtain just a subset of this information. In such cases, an older set of per-backend statistics access functions can be used; these are shown in Table 26.33. These access functions use a backend ID number, which ranges from one to the number of currently active backends. The function pg_stat_get_backend_idset provides a convenient way to generate one row for each active backend for invoking these functions. For example, to show the PIDs and current queries of all backends:

SELECT pg_stat_get_backend_pid(s.backendid) AS pid,
       pg_stat_get_backend_activity(s.backendid) AS query
    FROM (SELECT pg_stat_get_backend_idset() AS backendid) AS s;

Table 26.33. Per-Backend Statistics Functions

Function Description
`pg_stat_get_backend_idset` () → `setof integer` Returns the set of currently active backend ID numbers (from 1 to the number of active backends).
`pg_stat_get_backend_activity` ( `integer` ) → `text` Returns the text of this backend's most recent query.
`pg_stat_get_backend_activity_start` ( `integer` ) → `timestamp with time zone` Returns the time when the backend's most recent query was started.
`pg_stat_get_backend_client_addr` ( `integer` ) → `inet` Returns the IP address of the client connected to this backend.
`pg_stat_get_backend_client_port` ( `integer` ) → `integer` Returns the TCP port number that the client is using for communication.
`pg_stat_get_backend_dbid` ( `integer` ) → `oid` Returns the OID of the database this backend is connected to.
`pg_stat_get_backend_pid` ( `integer` ) → `integer` Returns the process ID of this backend.
`pg_stat_get_backend_start` ( `integer` ) → `timestamp with time zone` Returns the time when this process was started.
`pg_stat_get_backend_userid` ( `integer` ) → `oid` Returns the OID of the user logged into this backend.
`pg_stat_get_backend_wait_event_type` ( `integer` ) → `text` Returns the wait event type name if this backend is currently waiting, otherwise NULL. See Table 26.4 for details.
`pg_stat_get_backend_wait_event` ( `integer` ) → `text` Returns the wait event name if this backend is currently waiting, otherwise NULL. See Table 26.5 through Table 26.13.
`pg_stat_get_backend_xact_start` ( `integer` ) → `timestamp with time zone` Returns the time when the backend's current transaction was started.

Function

Description

pg_stat_get_backend_idset () → setof integer

Returns the set of currently active backend ID numbers (from 1 to the number of active backends).

pg_stat_get_backend_activity ( integer ) → text

Returns the text of this backend's most recent query.

pg_stat_get_backend_activity_start ( integer ) → timestamp with time zone

Returns the time when the backend's most recent query was started.

pg_stat_get_backend_client_addr ( integer ) → inet

Returns the IP address of the client connected to this backend.

pg_stat_get_backend_client_port ( integer ) → integer

Returns the TCP port number that the client is using for communication.

pg_stat_get_backend_dbid ( integer ) → oid

Returns the OID of the database this backend is connected to.

pg_stat_get_backend_pid ( integer ) → integer

Returns the process ID of this backend.

pg_stat_get_backend_start ( integer ) → timestamp with time zone

Returns the time when this process was started.

pg_stat_get_backend_userid ( integer ) → oid

Returns the OID of the user logged into this backend.

pg_stat_get_backend_wait_event_type ( integer ) → text

Returns the wait event type name if this backend is currently waiting, otherwise NULL. See Table 26.4 for details.

pg_stat_get_backend_wait_event ( integer ) → text

Returns the wait event name if this backend is currently waiting, otherwise NULL. See Table 26.5 through Table 26.13.

pg_stat_get_backend_xact_start ( integer ) → timestamp with time zone

Returns the time when the backend's current transaction was started.

Prev	Up	Next
26.1. Standard Unix Tools	Home	26.3. Viewing Locks

epub pdf

26.2. The Statistics Collector

26.2.1. Statistics Collection Configuration

26.2.2. Viewing Statistics

26.2.3. pg_stat_activity

Note

Note

26.2.4. pg_stat_replication

Note

26.2.5. pg_stat_replication_slots

26.2.6. pg_stat_wal_receiver

26.2.7. pg_stat_subscription

26.2.8. pg_stat_ssl

26.2.9. pg_stat_gssapi

26.2.10. pg_stat_archiver

26.2.11. pg_stat_bgwriter

26.2.12. pg_stat_wal

26.2.13. pg_stat_database

26.2.14. pg_stat_database_conflicts

26.2.15. pg_stat_all_tables

26.2.16. pg_stat_all_indexes

Note

26.2.17. pg_statio_all_tables

26.2.18. pg_statio_all_indexes

26.2.19. pg_statio_all_sequences

26.2.20. pg_stat_user_functions

26.2.21. pg_stat_slru

26.2.22. Statistics Functions

Warning

26.2.3. `pg_stat_activity`

26.2.4. `pg_stat_replication`

26.2.5. `pg_stat_replication_slots`

26.2.6. `pg_stat_wal_receiver`

26.2.7. `pg_stat_subscription`

26.2.8. `pg_stat_ssl`

26.2.9. `pg_stat_gssapi`

26.2.10. `pg_stat_archiver`

26.2.11. `pg_stat_bgwriter`

26.2.12. `pg_stat_wal`

26.2.13. `pg_stat_database`

26.2.14. `pg_stat_database_conflicts`

26.2.15. `pg_stat_all_tables`

26.2.16. `pg_stat_all_indexes`

26.2.17. `pg_statio_all_tables`

26.2.18. `pg_statio_all_indexes`

26.2.19. `pg_statio_all_sequences`

26.2.20. `pg_stat_user_functions`

26.2.21. `pg_stat_slru`