Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0) - Mailing list pgsql-patches

From Bruce Momjian
Subject Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0)
Date
Msg-id 200503072121.j27LLnD17741@candle.pha.pa.us
Whole thread Raw
In response to Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0) (fwd)  (Berényi Gábor <ber_@freemail.hu>)
Responses Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0) (fwd)
List pgsql-patches
Ber�nyi G�bor wrote:
> The problem is something else.
> Gives the same message.
>
> Bruce Momjian <pgman@candle.pha.pa.us> ?rta:
>
> > Ber?nyi G?bor wrote:
> > > Dear Bruce,
> > > Didn't work:
> > > Fatal bcc32.mak 169: No terminator specified for in-line file
> operator
> > > Look forward to hear of you again, Gabor
> >
> > OK, new bcc32.mak attached.  It turns out the actions were
> indented with
> > spaces instead of tabs.

OK, I think I figured it out.  "Resource files" are done differently in
MS make and bcc make.  I have attached a new file.  Please test and let
me know.  If you can keep testing, we will eventually get this working.
Thanks.

--
  Bruce Momjian                        |  http://candle.pha.pa.us
  pgman@candle.pha.pa.us               |  (610) 359-1001
  +  If your life is a hard drive,     |  13 Roberts Road
  +  Christ can be your backup.        |  Newtown Square, Pennsylvania 19073
# Makefile for Borland C++ 5.5

# Will build a Win32 static library libpq.lib
#        and a Win32 dynamic library libpq.dll with import library libpqdll.lib

# Borland C++ base install directory goes here
# BCB=d:\Borland\Bcc55

!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF

!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make  -DCFG=[Release | Debug] /f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF

!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF

!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF

OUTFILENAME=blibpq

USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;

CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -WD -c -D$(USERDEFINES) -tWM \
        -a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc

!IFDEF DEBUG
CPP_PROJ    = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ    = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif

CLEAN :
    -@erase "$(INTDIR)\getaddrinfo.obj"
    -@erase "$(INTDIR)\pgstrcasecmp.obj"
    -@erase "$(INTDIR)\thread.obj"
    -@erase "$(INTDIR)\inet_aton.obj"
    -@erase "$(INTDIR)\crypt.obj"
    -@erase "$(INTDIR)\noblock.obj"
    -@erase "$(INTDIR)\md5.obj"
    -@erase "$(INTDIR)\ip.obj"
    -@erase "$(INTDIR)\fe-auth.obj"
    -@erase "$(INTDIR)\fe-protocol2.obj"
    -@erase "$(INTDIR)\fe-protocol3.obj"
    -@erase "$(INTDIR)\fe-connect.obj"
    -@erase "$(INTDIR)\fe-exec.obj"
    -@erase "$(INTDIR)\fe-lobj.obj"
    -@erase "$(INTDIR)\fe-misc.obj"
    -@erase "$(INTDIR)\fe-print.obj"
    -@erase "$(INTDIR)\fe-secure.obj"
    -@erase "$(INTDIR)\pqexpbuffer.obj"
    -@erase "$(INTDIR)\pqsignal.obj"
    -@erase "$(OUTDIR)\libpqdll.obj"
    -@erase "$(OUTDIR)\win32.obj"
    -@erase "$(INTDIR)\wchar.obj"
    -@erase "$(INTDIR)\encnames.obj"
    -@erase "$(INTDIR)\pthread-win32.obj"
    -@erase "$(OUTDIR)\$(OUTFILENAME).lib"
    -@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
    -@erase "$(OUTDIR)\libpq.res"
    -@erase "$(OUTDIR)\$(OUTFILENAME).dll"
    -@erase "$(OUTDIR)\$(OUTFILENAME).tds"
    -@erase "$(INTDIR)\pg_config_paths.h"

LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
    "$(INTDIR)\win32.obj" \
    "$(INTDIR)\getaddrinfo.obj" \
    "$(INTDIR)\pgstrcasecmp.obj" \
    "$(INTDIR)\thread.obj" \
    "$(INTDIR)\inet_aton.obj" \
    "$(INTDIR)\crypt.obj" \
    "$(INTDIR)\noblock.obj" \
    "$(INTDIR)\md5.obj" \
    "$(INTDIR)\ip.obj" \
    "$(INTDIR)\fe-auth.obj" \
    "$(INTDIR)\fe-protocol2.obj" \
    "$(INTDIR)\fe-protocol3.obj" \
    "$(INTDIR)\fe-connect.obj" \
    "$(INTDIR)\fe-exec.obj" \
    "$(INTDIR)\fe-lobj.obj" \
    "$(INTDIR)\fe-misc.obj" \
    "$(INTDIR)\fe-print.obj" \
    "$(INTDIR)\fe-secure.obj" \
    "$(INTDIR)\pqexpbuffer.obj" \
    "$(INTDIR)\pqsignal.obj" \
    "$(INTDIR)\wchar.obj" \
    "$(INTDIR)\encnames.obj" \
    "$(INTDIR)\pthread-win32.obj"


RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"

LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"

ALL: config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"

config: ..\..\include\pg_config.h pthread.h pg_config_paths.h

..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
    copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h

pthread.h: pthread.h.win32
    copy pthread.h.win32 pthread.h

pg_config_paths.h: win32.mak
    echo #define SYSCONFDIR "" > pg_config_paths.h

"$(OUTDIR)" :
    @if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

/* @&&! is a Response file, http://users.deltacomm.com/edmulroy/howto8.htm */

"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
    $(LINK32) @&&!
    $(LINK32_FLAGS) +
    c0d32.obj $(LINK32_OBJS), +
    $@,, +
    "$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
    blibpqdll.def,"$(INTDIR)\libpq.res"
!
    implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@

"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
    $(RSC) $(RSC_PROJ) libpq.rc

"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
    $(LIB32) $@ @&&!
+-"$(**: =" &^
+-")"
!


"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\getaddrinfo.c
!

"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\pgstrcasecmp.c
!

"$(INTDIR)\thread.obj" : ..\..\port\thread.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\thread.c
!

"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\inet_aton.c
!

"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\crypt.c
!

"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\port\noblock.c
!

"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\backend\libpq\md5.c
!

"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
    $(CPP) @&&!
    $(CPP_PROJ) ..\..\backend\libpq\ip.c
!

"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
    $(CPP) @&&!
    $(CPP_PROJ) /I "." ..\..\backend\utils\mb\wchar.c
!


"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
    $(CPP) @&&!
    $(CPP_PROJ) /I "." ..\..\backend\utils\mb\encnames.c
!

.c.obj:
    $(CPP) -o"$(INTDIR)\$&" $(CPP_PROJ) $<


pgsql-patches by date:

Previous
From: Peter Eisentraut
Date:
Subject: Re: Faster install-sh in C
Next
From: Neil Conway
Date:
Subject: Re: [HACKERS] Implementation of SQLCODE and SQLERRM variables