Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes - Mailing list pgsql-bugs

From Антон Степаненко
Subject Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes
Date
Msg-id 1202541308329125@web105.yandex.ru
Whole thread Raw
In response to Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes  (Merlin Moncure <mmoncure@gmail.com>)
Responses Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes
List pgsql-bugs

17.06.2011, 20:19, "Merlin Moncure" <mmoncure@gmail.com>:
> On Fri, Jun 17, 2011 at 10:56 AM, Kevin Grittner
> <Kevin.Grittner@wicourts.gov>; wrote:
>
>>>  I still do not believe that this is hardware problem.
>>  How would an application cause a bus error?
>
> unaligned memory access on risc maybe?  what's this running on?
>
> merlin

*****:~$ cat /proc/cpuinfo
processor       : 0
....
processor       : 23
vendor_id       : GenuineIntel
cpu family      : 6
model           : 44
model name      : Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz
stepping        : 2
cpu MHz         : 2400.468
cache size      : 12288 KB
physical id     : 1
siblings        : 12
core id         : 10
cpu cores       : 6
apicid          : 53
initial apicid  : 53
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
sse2ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc
aperfmperfpni pclmulqdq dtes64 monitor ds_cat /proc/cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt
aeslahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid 
bogomips        : 4799.88
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management:

*****:~$ cat /proc/meminfo
MemTotal:       24681200 kB
MemFree:         4443356 kB
Cached:                0 kB
Active:                0 kB
Inactive:              0 kB
Active(anon):          0 kB
Inactive(anon):        0 kB
Active(file):          0 kB
Inactive(file):        0 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
AnonPages:             0 kB
Mapped:                0 kB
Shmem:                 0 kB
Slab:                  0 kB
SReclaimable:          0 kB
SUnreclaim:            0 kB

*****:~$ fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
..
Disk /dev/sdd: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

*****:~$ cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md3 : active raid10 sdc3[2] sdd3[3] sda3[0] sdb3[1]     955770752 blocks super 1.2 64K chunks 2 near-copies [4/4]
[UUUU]    [>....................]  resync =  3.3% (31857408/955770752) finish=77.2min speed=199401K/sec 


pgsql-bugs by date:

Previous
From: Merlin Moncure
Date:
Subject: Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes
Next
From: Merlin Moncure
Date:
Subject: Re: could not read block XXXXX in file "base/YYYYY/ZZZZZZ": read only 160 of 8192 bytes