18.9. Secure TCP/IP Connections with SSL
Postgres Pro has native support for using SSL connections to encrypt client/server communications for increased security.
18.9.1. Basic Setup
With SSL support compiled in, the Postgres Pro server can be started with SSL enabled by setting the parameter ssl to
postgresql.conf. The server will listen for both normal and SSL connections on the same TCP port, and will negotiate with any connecting client on whether to use SSL. By default, this is at the client's option; see Section 20.1 about how to set up the server to require use of SSL for some or all connections.
To start in SSL mode, files containing the server certificate and private key must exist. By default, these files are expected to be named
server.key, respectively, in the server's data directory, but other names and locations can be specified using the configuration parameters ssl_cert_file and ssl_key_file.
On Unix systems, the permissions on
server.key must disallow any access to world or group; achieve this by the command
chmod 0600 server.key. Alternatively, the file can be owned by root and have group read access (that is,
0640 permissions). That setup is intended for installations where certificate and key files are managed by the operating system. The user under which the Postgres Pro server runs should then be made a member of the group that has access to those certificate and key files.
If the data directory allows group read access then certificate files may need to be located outside of the data directory in order to conform to the security requirements outlined above. Generally, group access is enabled to allow an unprivileged user to backup the database, and in that case the backup software will not be able to read the certificate files and will likely error.
If the private key is protected with a passphrase, the server will prompt for the passphrase and will not start until it has been entered. Using a passphrase by default disables the ability to change the server's SSL configuration without a server restart, but see ssl_passphrase_command_supports_reload. Furthermore, passphrase-protected private keys cannot be used at all on Windows.
The first certificate in
server.crt must be the server's certificate because it must match the server's private key. The certificates of “intermediate” certificate authorities can also be appended to the file. Doing this avoids the necessity of storing intermediate certificates on clients, assuming the root and intermediate certificates were created with
v3_ca extensions. (This sets the certificate's basic constraint of
true.) This allows easier expiration of intermediate certificates.
It is not necessary to add the root certificate to
server.crt. Instead, clients must have the root certificate of the server's certificate chain.
18.9.2. OpenSSL Configuration
Postgres Pro reads the system-wide OpenSSL configuration file. By default, this file is named
openssl.cnf and is located in the directory reported by
openssl version -d. This default can be overridden by setting environment variable
OPENSSL_CONF to the name of the desired configuration file.
OpenSSL supports a wide range of ciphers and authentication algorithms, of varying strength. While a list of ciphers can be specified in the OpenSSL configuration file, you can specify ciphers specifically for use by the database server by modifying ssl_ciphers in
It is possible to have authentication without encryption overhead by using
NULL-MD5 ciphers. However, a man-in-the-middle could read and pass communications between client and server. Also, encryption overhead is minimal compared to the overhead of authentication. For these reasons NULL ciphers are not recommended.
18.9.3. Using Client Certificates
To require the client to supply a trusted certificate, place certificates of the root certificate authorities (CAs) you trust in a file in the data directory, set the parameter ssl_ca_file in
postgresql.conf to the new file name, and add the authentication option
clientcert=verify-full to the appropriate
hostssl line(s) in
pg_hba.conf. A certificate will then be requested from the client during SSL connection startup. (See Section 35.19 for a description of how to set up certificates on the client.)
hostssl entry with
clientcert=verify-ca, the server will verify that the client's certificate is signed by one of the trusted certificate authorities. If
clientcert=verify-full is specified, the server will not only verify the certificate chain, but it will also check whether the username or its mapping matches the
cn (Common Name) of the provided certificate. Note that certificate chain validation is always ensured when the
cert authentication method is used (see Section 20.12).
Intermediate certificates that chain up to existing root certificates can also appear in the ssl_ca_file file if you wish to avoid storing them on clients (assuming the root and intermediate certificates were created with
v3_ca extensions). Certificate Revocation List (CRL) entries are also checked if the parameter ssl_crl_file or ssl_crl_dir is set.
clientcert authentication option is available for all authentication methods, but only in
pg_hba.conf lines specified as
clientcert is not specified, the server verifies the client certificate against its CA file only if a client certificate is presented and the CA is configured.
There are two approaches to enforce that users provide a certificate during login.
The first approach makes use of the
cert authentication method for
hostssl entries in
pg_hba.conf, such that the certificate itself is used for authentication while also providing ssl connection security. See Section 20.12 for details. (It is not necessary to specify any
clientcert options explicitly when using the
cert authentication method.) In this case, the
cn (Common Name) provided in the certificate is checked against the user name or an applicable mapping.
The second approach combines any authentication method for
hostssl entries with the verification of client certificates by setting the
clientcert authentication option to
verify-full. The former option only enforces that the certificate is valid, while the latter also ensures that the
cn (Common Name) in the certificate matches the user name or an applicable mapping.
18.9.4. SSL Server File Usage
Table 18.2 summarizes the files that are relevant to the SSL setup on the server. (The shown file names are default names. The locally configured names could be different.)
Table 18.2. SSL Server File Usage
|ssl_cert_file (||server certificate||sent to client to indicate server's identity|
|ssl_key_file (||server private key||proves server certificate was sent by the owner; does not indicate certificate owner is trustworthy|
|ssl_ca_file||trusted certificate authorities||checks that client certificate is signed by a trusted certificate authority|
|ssl_crl_file||certificates revoked by certificate authorities||client certificate must not be on this list|
The server reads these files at server start and whenever the server configuration is reloaded. On Windows systems, they are also re-read whenever a new backend process is spawned for a new client connection.
If an error in these files is detected at server start, the server will refuse to start. But if an error is detected during a configuration reload, the files are ignored and the old SSL configuration continues to be used. On Windows systems, if an error in these files is detected at backend start, that backend will be unable to establish an SSL connection. In all these cases, the error condition is reported in the server log.
18.9.5. Creating Certificates
To create a simple self-signed certificate for the server, valid for 365 days, use the following OpenSSL command, replacing
dbhost.yourdomain.com with the server's host name:
openssl req -new -x509 -days 365 -nodes -text -out server.crt \ -keyout server.key -subj "/CN=
chmod og-rwx server.key
because the server will reject the file if its permissions are more liberal than this. For more details on how to create your server private key and certificate, refer to the OpenSSL documentation.
While a self-signed certificate can be used for testing, a certificate signed by a certificate authority (CA) (usually an enterprise-wide root CA) should be used in production.
To create a server certificate whose identity can be validated by clients, first create a certificate signing request (CSR) and a public/private key file:
openssl req -new -nodes -text -out root.csr \ -keyout root.key -subj "/CN=
root.yourdomain.com" chmod og-rwx root.key
Then, sign the request with the key to create a root certificate authority (using the default OpenSSL configuration file location on Linux):
openssl x509 -req -in root.csr -text -days 3650 \ -extfile /etc/ssl/openssl.cnf -extensions v3_ca \ -signkey root.key -out root.crt
Finally, create a server certificate signed by the new root certificate authority:
openssl req -new -nodes -text -out server.csr \ -keyout server.key -subj "/CN=
dbhost.yourdomain.com" chmod og-rwx server.key openssl x509 -req -in server.csr -text -days 365 \ -CA root.crt -CAkey root.key -CAcreateserial \ -out server.crt
server.key should be stored on the server, and
root.crt should be stored on the client so the client can verify that the server's leaf certificate was signed by its trusted root certificate.
root.key should be stored offline for use in creating future certificates.
It is also possible to create a chain of trust that includes intermediate certificates:
# root openssl req -new -nodes -text -out root.csr \ -keyout root.key -subj "/CN=
root.yourdomain.com" chmod og-rwx root.key openssl x509 -req -in root.csr -text -days 3650 \ -extfile /etc/ssl/openssl.cnf -extensions v3_ca \ -signkey root.key -out root.crt # intermediate openssl req -new -nodes -text -out intermediate.csr \ -keyout intermediate.key -subj "/CN=
intermediate.yourdomain.com" chmod og-rwx intermediate.key openssl x509 -req -in intermediate.csr -text -days 1825 \ -extfile /etc/ssl/openssl.cnf -extensions v3_ca \ -CA root.crt -CAkey root.key -CAcreateserial \ -out intermediate.crt # leaf openssl req -new -nodes -text -out server.csr \ -keyout server.key -subj "/CN=
dbhost.yourdomain.com" chmod og-rwx server.key openssl x509 -req -in server.csr -text -days 365 \ -CA intermediate.crt -CAkey intermediate.key -CAcreateserial \ -out server.crt
intermediate.crt should be concatenated into a certificate file bundle and stored on the server.
server.key should also be stored on the server.
root.crt should be stored on the client so the client can verify that the server's leaf certificate was signed by a chain of certificates linked to its trusted root certificate.
intermediate.key should be stored offline for use in creating future certificates.