CREATE TABLE
CREATE TABLE — define a new table
Synopsis
CREATE [ [ GLOBAL | LOCAL ] { TEMPORARY | TEMP } | UNLOGGED | CONSTANT ] TABLE [ IF NOT EXISTS ]table_name
( [ {column_name
data_type
[ COLLATEcollation
] [column_constraint
[ ... ] ] |table_constraint
| LIKEsource_table
[like_option
... ] } [, ... ] ] ) [ INHERITS (parent_table
[, ... ] ) ] [ PARTITION BY { RANGE | LIST | HASH } ( {column_name
| (expression
) } [pg_pathman_partitioning_clause
] [ COLLATEcollation
] [opclass
] [, ... ] ) [ USINGpartition_backend
] ] [ USINGmethod
] [ WITH (storage_parameter
[=value
] [, ... ] ) | WITHOUT OIDS ] [ ON COMMIT { PRESERVE ROWS | DELETE ROWS | DROP } ] [ TABLESPACEtablespace_name
] CREATE [ [ GLOBAL | LOCAL ] { TEMPORARY | TEMP } | UNLOGGED | CONSTANT ] TABLE [ IF NOT EXISTS ]table_name
OFtype_name
[ ( {column_name
[ WITH OPTIONS ] [column_constraint
[ ... ] ] |table_constraint
} [, ... ] ) ] [ PARTITION BY { RANGE | LIST | HASH } ( {column_name
| (expression
) } [pg_pathman_partitioning_clause
] [ COLLATEcollation
] [opclass
] [, ... ] ) [ USINGpartition_backend
] ] [ USINGmethod
] [ WITH (storage_parameter
[=value
] [, ... ] ) | WITHOUT OIDS ] [ ON COMMIT { PRESERVE ROWS | DELETE ROWS | DROP } ] [ TABLESPACEtablespace_name
] CREATE [ [ GLOBAL | LOCAL ] { TEMPORARY | TEMP } | UNLOGGED ] TABLE [ IF NOT EXISTS ]table_name
PARTITION OFparent_table
[ ( {column_name
[ WITH OPTIONS ] [column_constraint
[ ... ] ] |table_constraint
} [, ... ] ) ] { FOR VALUESpartition_bound_spec
| DEFAULT } [ PARTITION BY { RANGE | LIST | HASH } ( {column_name
| (expression
) } [ COLLATEcollation
] [opclass
] [, ... ] ) [ USINGpartition_backend
] ] [ USINGmethod
] [ WITH (storage_parameter
[=value
] [, ... ] ) | WITHOUT OIDS ] [ ON COMMIT { PRESERVE ROWS | DELETE ROWS | DROP } ] [ TABLESPACEtablespace_name
] wherecolumn_constraint
is: [ CONSTRAINTconstraint_name
] { NOT NULL | NULL | CHECK (expression
) [ NO INHERIT ] | DEFAULTdefault_expr
| GENERATED ALWAYS AS (generation_expr
) STORED | GENERATED { ALWAYS | BY DEFAULT } AS IDENTITY [ (sequence_options
) ] | UNIQUEindex_parameters
| PRIMARY KEYindex_parameters
| REFERENCESreftable
[ (refcolumn
) ] [ MATCH FULL | MATCH PARTIAL | MATCH SIMPLE ] [ ON DELETEreferential_action
] [ ON UPDATEreferential_action
] } [ DEFERRABLE | NOT DEFERRABLE ] [ INITIALLY DEFERRED | INITIALLY IMMEDIATE ] andtable_constraint
is: [ CONSTRAINTconstraint_name
] { CHECK (expression
) [ NO INHERIT ] | UNIQUE (column_name
[, ... ] )index_parameters
| PRIMARY KEY (column_name
[, ... ] )index_parameters
| EXCLUDE [ USINGindex_method
] (exclude_element
WITHoperator
[, ... ] )index_parameters
[ WHERE (predicate
) ] | FOREIGN KEY (column_name
[, ... ] ) REFERENCESreftable
[ (refcolumn
[, ... ] ) ] [ MATCH FULL | MATCH PARTIAL | MATCH SIMPLE ] [ ON DELETEreferential_action
] [ ON UPDATEreferential_action
] } [ DEFERRABLE | NOT DEFERRABLE ] [ INITIALLY DEFERRED | INITIALLY IMMEDIATE ] andlike_option
is: { INCLUDING | EXCLUDING } { COMMENTS | CONSTRAINTS | DEFAULTS | GENERATED | IDENTITY | INDEXES | STATISTICS | STORAGE | ALL } andpartition_bound_spec
is: IN (partition_bound_expr
[, ...] ) | FROM ( {partition_bound_expr
| MINVALUE | MAXVALUE } [, ...] ) TO ( {partition_bound_expr
| MINVALUE | MAXVALUE } [, ...] ) | WITH ( MODULUSnumeric_literal
, REMAINDERnumeric_literal
) andpg_pathman_partitioning_clause
is: PARTITIONS (partition_count
) | (PARTITIONpartition_name
[ TABLESPACEtablespace_name
] [, ... ] ) | [ INTERVAL (value
) ] (PARTITIONpartition_name
VALUES LESS THAN (value
) [ TABLESPACEtablespace_name
] [, ... ] )index_parameters
inUNIQUE
,PRIMARY KEY
, andEXCLUDE
constraints are: [ INCLUDE (column_name
[, ... ] ) ] [ WITH (storage_parameter
[=value
] [, ... ] ) ] [ USING INDEX TABLESPACEtablespace_name
]exclude_element
in anEXCLUDE
constraint is: {column_name
| (expression
) } [opclass
] [ ASC | DESC ] [ NULLS { FIRST | LAST } ]
Description
CREATE TABLE
will create a new, initially empty table in the current database. The table will be owned by the user issuing the command.
If a schema name is given (for example, CREATE TABLE myschema.mytable ...
) then the table is created in the specified schema. Otherwise it is created in the current schema. Temporary tables exist in a special schema, so a schema name cannot be given when creating a temporary table. The name of the table must be distinct from the name of any other table, sequence, index, view, or foreign table in the same schema.
CREATE TABLE
also automatically creates a data type that represents the composite type corresponding to one row of the table. Therefore, tables cannot have the same name as any existing data type in the same schema.
The optional constraint clauses specify constraints (tests) that new or updated rows must satisfy for an insert or update operation to succeed. A constraint is an SQL object that helps define the set of valid values in the table in various ways.
There are two ways to define constraints: table constraints and column constraints. A column constraint is defined as part of a column definition. A table constraint definition is not tied to a particular column, and it can encompass more than one column. Every column constraint can also be written as a table constraint; a column constraint is only a notational convenience for use when the constraint only affects one column.
To be able to create a table, you must have USAGE
privilege on all column types or the type in the OF
clause, respectively.
Parameters
TEMPORARY
orTEMP
If specified, the table is created as a temporary table. Temporary tables are automatically dropped at the end of a session, or optionally at the end of the current transaction (see
ON COMMIT
below). Existing permanent tables with the same name are not visible to the current session while the temporary table exists, unless they are referenced with schema-qualified names. Any indexes created on a temporary table are automatically temporary as well.Unlike for permanent tables, we extend the physical file for a temporary table only when the table does not fit into
temp_buffers
cache anymore. Thus, the total and on-disk size of a temporary table can differ. Blocks are not allocated in advance, so we may run out of free space on disk when trying to evict a temporary buffer from cache. If the available disk space is smaller thantemp_buffers
size, an error occurs. This case is quite unusual, though.The autovacuum daemon cannot access and therefore cannot vacuum or analyze temporary tables. For this reason, appropriate vacuum and analyze operations should be performed via session SQL commands. For example, if a temporary table is going to be used in complex queries, it is wise to run
ANALYZE
on the temporary table after it is populated.Optionally,
GLOBAL
orLOCAL
can be written beforeTEMPORARY
orTEMP
. This presently makes no difference in Postgres Pro and is deprecated; see Compatibility.UNLOGGED
If specified, the table is created as an unlogged table. Data written to unlogged tables is not written to the write-ahead log (see Chapter 29), which makes them considerably faster than ordinary tables. However, they are not crash-safe: an unlogged table is automatically truncated after a crash or unclean shutdown. The contents of an unlogged table are also not replicated to standby servers. Any indexes created on an unlogged table are automatically unlogged as well.
CONSTANT
If specified, the table is created as read-only. No data can be modified or added to constant tables, and they are not processed by autovacuum. Constant tables cannot be changed to read-write mode, so there is no much sense to create them as constant; use CREATE TABLE AS or ALTER TABLE instead.
IF NOT EXISTS
Do not throw an error if a relation with the same name already exists. A notice is issued in this case. Note that there is no guarantee that the existing relation is anything like the one that would have been created.
table_name
The name (optionally schema-qualified) of the table to be created.
OF
type_name
Creates a typed table, which takes its structure from the specified composite type (name optionally schema-qualified). A typed table is tied to its type; for example the table will be dropped if the type is dropped (with
DROP TYPE ... CASCADE
).When a typed table is created, then the data types of the columns are determined by the underlying composite type and are not specified by the
CREATE TABLE
command. But theCREATE TABLE
command can add defaults and constraints to the table and can specify storage parameters.column_name
The name of a column to be created in the new table.
data_type
The data type of the column. This can include array specifiers. For more information on the data types supported by Postgres Pro, refer to Chapter 8.
COLLATE
collation
The
COLLATE
clause assigns a collation to the column (which must be of a collatable data type). If not specified, the column data type's default collation is used.INHERITS (
parent_table
[, ... ] )The optional
INHERITS
clause specifies a list of tables from which the new table automatically inherits all columns. Parent tables can be plain tables or foreign tables.Use of
INHERITS
creates a persistent relationship between the new child table and its parent table(s). Schema modifications to the parent(s) normally propagate to children as well, and by default the data of the child table is included in scans of the parent(s).If the same column name exists in more than one parent table, an error is reported unless the data types of the columns match in each of the parent tables. If there is no conflict, then the duplicate columns are merged to form a single column in the new table. If the column name list of the new table contains a column name that is also inherited, the data type must likewise match the inherited column(s), and the column definitions are merged into one. If the new table explicitly specifies a default value for the column, this default overrides any defaults from inherited declarations of the column. Otherwise, any parents that specify default values for the column must all specify the same default, or an error will be reported.
CHECK
constraints are merged in essentially the same way as columns: if multiple parent tables and/or the new table definition contain identically-namedCHECK
constraints, these constraints must all have the same check expression, or an error will be reported. Constraints having the same name and expression will be merged into one copy. A constraint markedNO INHERIT
in a parent will not be considered. Notice that an unnamedCHECK
constraint in the new table will never be merged, since a unique name will always be chosen for it.Column
STORAGE
settings are also copied from parent tables.If a column in the parent table is an identity column, that property is not inherited. A column in the child table can be declared identity column if desired.
PARTITION BY { RANGE | LIST | HASH } ( {
column_name
| (expression
) } [pg_pathman_partitioning_clause
] [opclass
] [, ...] ) [ USINGpartition_backend
]The optional
PARTITION BY
clause specifies a strategy of partitioning the table. The table thus created is called a partitioned table. The parenthesized list of columns or expressions forms the partition key for the table. When using range or hash partitioning, the partition key can include multiple columns or expressions (up to 32, but this limit can be altered when building Postgres Pro), but for list partitioning, the partition key must consist of a single column or expression.Range and list partitioning require a btree operator class, while hash partitioning requires a hash operator class. If no operator class is specified explicitly, the default operator class of the appropriate type will be used; if no default operator class exists, an error will be raised. When hash partitioning is used, the operator class used must implement support function 2 (see Section 39.16.3 for details).
A partitioned table is divided into sub-tables (called partitions), which are created using separate
CREATE TABLE
commands. The partitioned table is itself empty. A data row inserted into the table is routed to a partition based on the value of columns or expressions in the partition key. If no existing partition matches the values in the new row, an error will be reported, unless you usepg_pathman
for partitioning as explained below.Partitioned tables do not support
EXCLUDE
constraints; however, you can define these constraints on individual partitions.See Section 5.11 for more discussion on table partitioning.
Optionally, you can choose the backend that performs partitioning by specifying the
USING
clause, wherepartition_backend
partition_backend
can be one of the following:internal
— use Postgres Pro Enterprise core functionality for partitioning, as explained in Section 5.11.2.pg_pathman
— use thepg_pathman
extension, which supports range and hash partitioning.
If you omit this clause, the backend for partitioning is defined by the partition_backend parameter. The default value is
internal
, which enables declarative partitioning implementation provided by Postgres Pro core.Do not confuse
USING
with thepartition_backend
USING
clause, which cannot be used when creating partitioned tables.method
Starting from Postgres Pro 12, using pg_pathman is not recommended.
When using
pg_pathman
for partitioning, you must provide thepg_pathman_partitioning_clause
. Depending on the chosen partitioning strategy, this clause can be one of the following:PARTITIONS (
partition_count
)Specifies the number of partitions to create using hash partitioning.
( PARTITION
partition_name
[ TABLESPACEtablespace_name
] [, ... ] )Specifies the exact names of partitions to create using hash partitioning.
[ INTERVAL (
value
) ] ( PARTITIONpartition_name
VALUES LESS THAN (value
) [ TABLESPACEtablespace_name
] [, ... ] )Defines partition bounds and the names of partitions to create when using range partitioning strategy. The created partition will comprise the range of values defined by the
VALUES LESS THAN
clause, excluding the specifiedvalue
. Note that this value must be of the same type as the partition key.The optional
INTERVAL
clause specifies the interval that will be used to create new partitions if you insert data outside of the existing data range. IfINTERVAL
is not specified,pg_pathman
cannot create new partitions automatically. If you omit this clause, you can later enable automatic partition creation using theSET INTERVAL
form of theALTER TABLE
command. The value defining the interval must be of the same type as the partition key.
PARTITION OF
parent_table
{ FOR VALUESpartition_bound_spec
| DEFAULT }Creates the table as a partition of the specified parent table. The table can be created either as a partition for specific values using
FOR VALUES
or as a default partition usingDEFAULT
. Any indexes, constraints and user-defined row-level triggers that exist in the parent table are cloned on the new partition. This clause is not supported bypg_pathman
.The
partition_bound_spec
must correspond to the partitioning method and partition key of the parent table, and must not overlap with any existing partition of that parent. The form withIN
is used for list partitioning, the form withFROM
andTO
is used for range partitioning, and the form withWITH
is used for hash partitioning.partition_bound_expr
is any variable-free expression (subqueries, window functions, aggregate functions, and set-returning functions are not allowed). Its data type must match the data type of the corresponding partition key column. The expression is evaluated once at table creation time, so it can even contain volatile expressions such as
.CURRENT_TIMESTAMP
When creating a list partition,
NULL
can be specified to signify that the partition allows the partition key column to be null. However, there cannot be more than one such list partition for a given parent table.NULL
cannot be specified for range partitions.When creating a range partition, the lower bound specified with
FROM
is an inclusive bound, whereas the upper bound specified withTO
is an exclusive bound. That is, the values specified in theFROM
list are valid values of the corresponding partition key columns for this partition, whereas those in theTO
list are not. Note that this statement must be understood according to the rules of row-wise comparison (Section 9.23.5). For example, givenPARTITION BY RANGE (x,y)
, a partition boundFROM (1, 2) TO (3, 4)
allowsx=1
with anyy>=2
,x=2
with any non-nully
, andx=3
with anyy<4
.The special values
MINVALUE
andMAXVALUE
may be used when creating a range partition to indicate that there is no lower or upper bound on the column's value. For example, a partition defined usingFROM (MINVALUE) TO (10)
allows any values less than 10, and a partition defined usingFROM (10) TO (MAXVALUE)
allows any values greater than or equal to 10.When creating a range partition involving more than one column, it can also make sense to use
MAXVALUE
as part of the lower bound, andMINVALUE
as part of the upper bound. For example, a partition defined usingFROM (0, MAXVALUE) TO (10, MAXVALUE)
allows any rows where the first partition key column is greater than 0 and less than or equal to 10. Similarly, a partition defined usingFROM ('a', MINVALUE) TO ('b', MINVALUE)
allows any rows where the first partition key column starts with "a".Note that if
MINVALUE
orMAXVALUE
is used for one column of a partitioning bound, the same value must be used for all subsequent columns. For example,(10, MINVALUE, 0)
is not a valid bound; you should write(10, MINVALUE, MINVALUE)
.Also note that some element types, such as
timestamp
, have a notion of "infinity", which is just another value that can be stored. This is different fromMINVALUE
andMAXVALUE
, which are not real values that can be stored, but rather they are ways of saying that the value is unbounded.MAXVALUE
can be thought of as being greater than any other value, including "infinity" andMINVALUE
as being less than any other value, including "minus infinity". Thus the rangeFROM ('infinity') TO (MAXVALUE)
is not an empty range; it allows precisely one value to be stored — "infinity".If
DEFAULT
is specified, the table will be created as the default partition of the parent table. This option is not available for hash-partitioned tables. A partition key value not fitting into any other partition of the given parent will be routed to the default partition.When a table has an existing
DEFAULT
partition and a new partition is added to it, the default partition must be scanned to verify that it does not contain any rows which properly belong in the new partition. If the default partition contains a large number of rows, this may be slow. The scan will be skipped if the default partition is a foreign table or if it has a constraint which proves that it cannot contain rows which should be placed in the new partition.When creating a hash partition, a modulus and remainder must be specified. The modulus must be a positive integer, and the remainder must be a non-negative integer less than the modulus. Typically, when initially setting up a hash-partitioned table, you should choose a modulus equal to the number of partitions and assign every table the same modulus and a different remainder (see examples, below). However, it is not required that every partition have the same modulus, only that every modulus which occurs among the partitions of a hash-partitioned table is a factor of the next larger modulus. This allows the number of partitions to be increased incrementally without needing to move all the data at once. For example, suppose you have a hash-partitioned table with 8 partitions, each of which has modulus 8, but find it necessary to increase the number of partitions to 16. You can detach one of the modulus-8 partitions, create two new modulus-16 partitions covering the same portion of the key space (one with a remainder equal to the remainder of the detached partition, and the other with a remainder equal to that value plus 8), and repopulate them with data. You can then repeat this -- perhaps at a later time -- for each modulus-8 partition until none remain. While this may still involve a large amount of data movement at each step, it is still better than having to create a whole new table and move all the data at once.
A partition must have the same column names and types as the partitioned table to which it belongs. Modifications to the column names or types of a partitioned table will automatically propagate to all partitions.
CHECK
constraints will be inherited automatically by every partition, but an individual partition may specify additionalCHECK
constraints; additional constraints with the same name and condition as in the parent will be merged with the parent constraint. Defaults may be specified separately for each partition. But note that a partition's default value is not applied when inserting a tuple through a partitioned table.Rows inserted into a partitioned table will be automatically routed to the correct partition. If no suitable partition exists, an error will occur.
Operations such as TRUNCATE which normally affect a table and all of its inheritance children will cascade to all partitions, but may also be performed on an individual partition. Note that dropping a partition with
DROP TABLE
requires taking anACCESS EXCLUSIVE
lock on the parent table.LIKE
source_table
[like_option
... ]The
LIKE
clause specifies a table from which the new table automatically copies all column names, their data types, and their not-null constraints.Unlike
INHERITS
, the new table and original table are completely decoupled after creation is complete. Changes to the original table will not be applied to the new table, and it is not possible to include data of the new table in scans of the original table.Also unlike
INHERITS
, columns and constraints copied byLIKE
are not merged with similarly named columns and constraints. If the same name is specified explicitly or in anotherLIKE
clause, an error is signaled.The optional
like_option
clauses specify which additional properties of the original table to copy. SpecifyingINCLUDING
copies the property, specifyingEXCLUDING
omits the property.EXCLUDING
is the default. If multiple specifications are made for the same kind of object, the last one is used. The available options are:INCLUDING COMMENTS
Comments for the copied columns, constraints, and indexes will be copied. The default behavior is to exclude comments, resulting in the copied columns and constraints in the new table having no comments.
INCLUDING CONSTRAINTS
CHECK
constraints will be copied. No distinction is made between column constraints and table constraints. Not-null constraints are always copied to the new table.INCLUDING DEFAULTS
Default expressions for the copied column definitions will be copied. Otherwise, default expressions are not copied, resulting in the copied columns in the new table having null defaults. Note that copying defaults that call database-modification functions, such as
nextval
, may create a functional linkage between the original and new tables.INCLUDING GENERATED
Any generation expressions of copied column definitions will be copied. By default, new columns will be regular base columns.
INCLUDING IDENTITY
Any identity specifications of copied column definitions will be copied. A new sequence is created for each identity column of the new table, separate from the sequences associated with the old table.
INCLUDING INDEXES
Indexes,
PRIMARY KEY
,UNIQUE
, andEXCLUDE
constraints on the original table will be created on the new table. Names for the new indexes and constraints are chosen according to the default rules, regardless of how the originals were named. (This behavior avoids possible duplicate-name failures for the new indexes.)INCLUDING STATISTICS
Extended statistics are copied to the new table.
INCLUDING STORAGE
STORAGE
settings for the copied column definitions will be copied. The default behavior is to excludeSTORAGE
settings, resulting in the copied columns in the new table having type-specific default settings. For more onSTORAGE
settings, see Section 69.2.INCLUDING ALL
INCLUDING ALL
is an abbreviated form selecting all the available individual options. (It could be useful to write individualEXCLUDING
clauses afterINCLUDING ALL
to select all but some specific options.)
The
LIKE
clause can also be used to copy column definitions from views, foreign tables, or composite types. Inapplicable options (e.g.,INCLUDING INDEXES
from a view) are ignored.CONSTRAINT
constraint_name
An optional name for a column or table constraint. If the constraint is violated, the constraint name is present in error messages, so constraint names like
col must be positive
can be used to communicate helpful constraint information to client applications. (Double-quotes are needed to specify constraint names that contain spaces.) If a constraint name is not specified, the system generates a name.NOT NULL
The column is not allowed to contain null values.
NULL
The column is allowed to contain null values. This is the default.
This clause is only provided for compatibility with non-standard SQL databases. Its use is discouraged in new applications.
CHECK (
expression
) [ NO INHERIT ]The
CHECK
clause specifies an expression producing a Boolean result which new or updated rows must satisfy for an insert or update operation to succeed. Expressions evaluating to TRUE or UNKNOWN succeed. Should any row of an insert or update operation produce a FALSE result, an error exception is raised and the insert or update does not alter the database. A check constraint specified as a column constraint should reference that column's value only, while an expression appearing in a table constraint can reference multiple columns.Currently,
CHECK
expressions cannot contain subqueries nor refer to variables other than columns of the current row (see Section 5.4.1). The system columntableoid
may be referenced, but not any other system column.A constraint marked with
NO INHERIT
will not propagate to child tables.When a table has multiple
CHECK
constraints, they will be tested for each row in alphabetical order by name, after checkingNOT NULL
constraints. (PostgreSQL versions before 9.5 did not honor any particular firing order forCHECK
constraints.)DEFAULT
default_expr
The
DEFAULT
clause assigns a default data value for the column whose column definition it appears within. The value is any variable-free expression (in particular, cross-references to other columns in the current table are not allowed). Subqueries are not allowed either. The data type of the default expression must match the data type of the column.The default expression will be used in any insert operation that does not specify a value for the column. If there is no default for a column, then the default is null.
GENERATED ALWAYS AS (
generation_expr
) STOREDThis clause creates the column as a generated column. The column cannot be written to, and when read the result of the specified expression will be returned.
The keyword
STORED
is required to signify that the column will be computed on write and will be stored on disk.The generation expression can refer to other columns in the table, but not other generated columns. Any functions and operators used must be immutable. References to other tables are not allowed.
GENERATED { ALWAYS | BY DEFAULT } AS IDENTITY [ (
sequence_options
) ]This clause creates the column as an identity column. It will have an implicit sequence attached to it and the column in new rows will automatically have values from the sequence assigned to it. Such a column is implicitly
NOT NULL
.The clauses
ALWAYS
andBY DEFAULT
determine how the sequence value is given precedence over a user-specified value in anINSERT
statement. IfALWAYS
is specified, a user-specified value is only accepted if theINSERT
statement specifiesOVERRIDING SYSTEM VALUE
. IfBY DEFAULT
is specified, then the user-specified value takes precedence. See INSERT for details. (In theCOPY
command, user-specified values are always used regardless of this setting.)The optional
sequence_options
clause can be used to override the options of the sequence. See CREATE SEQUENCE for details.UNIQUE
(column constraint)UNIQUE (
[column_name
[, ... ] )INCLUDE (
] (table constraint)column_name
[, ...])The
UNIQUE
constraint specifies that a group of one or more columns of a table can contain only unique values. The behavior of a unique table constraint is the same as that of a unique column constraint, with the additional capability to span multiple columns. The constraint therefore enforces that any two rows must differ in at least one of these columns.For the purpose of a unique constraint, null values are not considered equal.
Each unique constraint should name a set of columns that is different from the set of columns named by any other unique or primary key constraint defined for the table. (Otherwise, redundant unique constraints will be discarded.)
When establishing a unique constraint for a multi-level partition hierarchy, all the columns in the partition key of the target partitioned table, as well as those of all its descendant partitioned tables, must be included in the constraint definition.
Adding a unique constraint will automatically create a unique btree index on the column or group of columns used in the constraint.
The optional
INCLUDE
clause adds to that index one or more columns that are simply “payload”: uniqueness is not enforced on them, and the index cannot be searched on the basis of those columns. However they can be retrieved by an index-only scan. Note that although the constraint is not enforced on included columns, it still depends on them. Consequently, some operations on such columns (e.g.,DROP COLUMN
) can cause cascaded constraint and index deletion.PRIMARY KEY
(column constraint)PRIMARY KEY (
[column_name
[, ... ] )INCLUDE (
] (table constraint)column_name
[, ...])The
PRIMARY KEY
constraint specifies that a column or columns of a table can contain only unique (non-duplicate), nonnull values. Only one primary key can be specified for a table, whether as a column constraint or a table constraint.The primary key constraint should name a set of columns that is different from the set of columns named by any unique constraint defined for the same table. (Otherwise, the unique constraint is redundant and will be discarded.)
PRIMARY KEY
enforces the same data constraints as a combination ofUNIQUE
andNOT NULL
. However, identifying a set of columns as the primary key also provides metadata about the design of the schema, since a primary key implies that other tables can rely on this set of columns as a unique identifier for rows.When placed on a partitioned table,
PRIMARY KEY
constraints share the restrictions previously described forUNIQUE
constraints.Adding a
PRIMARY KEY
constraint will automatically create a unique btree index on the column or group of columns used in the constraint.The optional
INCLUDE
clause adds to that index one or more columns that are simply “payload”: uniqueness is not enforced on them, and the index cannot be searched on the basis of those columns. However they can be retrieved by an index-only scan. Note that although the constraint is not enforced on included columns, it still depends on them. Consequently, some operations on such columns (e.g.,DROP COLUMN
) can cause cascaded constraint and index deletion.EXCLUDE [ USING
index_method
] (exclude_element
WITHoperator
[, ... ] )index_parameters
[ WHERE (predicate
) ]The
EXCLUDE
clause defines an exclusion constraint, which guarantees that if any two rows are compared on the specified column(s) or expression(s) using the specified operator(s), not all of these comparisons will returnTRUE
. If all of the specified operators test for equality, this is equivalent to aUNIQUE
constraint, although an ordinary unique constraint will be faster. However, exclusion constraints can specify constraints that are more general than simple equality. For example, you can specify a constraint that no two rows in the table contain overlapping circles (see Section 8.8) by using the&&
operator.Exclusion constraints are implemented using an index, so each specified operator must be associated with an appropriate operator class (see Section 11.10) for the index access method
index_method
. The operators are required to be commutative. Eachexclude_element
can optionally specify an operator class and/or ordering options; these are described fully under CREATE INDEX.The access method must support
amgettuple
(see Chapter 61); at present this means GIN cannot be used. Although it's allowed, there is little point in using B-tree or hash indexes with an exclusion constraint, because this does nothing that an ordinary unique constraint doesn't do better. So in practice the access method will always be GiST or SP-GiST.The
predicate
allows you to specify an exclusion constraint on a subset of the table; internally this creates a partial index. Note that parentheses are required around the predicate.REFERENCES
(column constraint)reftable
[ (refcolumn
) ] [ MATCHmatchtype
] [ ON DELETEreferential_action
] [ ON UPDATEreferential_action
]FOREIGN KEY (
(table constraint)column_name
[, ... ] ) REFERENCESreftable
[ (refcolumn
[, ... ] ) ] [ MATCHmatchtype
] [ ON DELETEreferential_action
] [ ON UPDATEreferential_action
]These clauses specify a foreign key constraint, which requires that a group of one or more columns of the new table must only contain values that match values in the referenced column(s) of some row of the referenced table. If the
refcolumn
list is omitted, the primary key of thereftable
is used. Otherwise, therefcolumn
list must refer to the columns of a non-deferrable unique or primary key constraint or be the columns of a non-partial unique index. The user must haveREFERENCES
permission on the referenced table (either the whole table, or the specific referenced columns). The addition of a foreign key constraint requires aSHARE ROW EXCLUSIVE
lock on the referenced table. Note that foreign key constraints cannot be defined between temporary tables and permanent tables.A value inserted into the referencing column(s) is matched against the values of the referenced table and referenced columns using the given match type. There are three match types:
MATCH FULL
,MATCH PARTIAL
, andMATCH SIMPLE
(which is the default).MATCH FULL
will not allow one column of a multicolumn foreign key to be null unless all foreign key columns are null; if they are all null, the row is not required to have a match in the referenced table.MATCH SIMPLE
allows any of the foreign key columns to be null; if any of them are null, the row is not required to have a match in the referenced table.MATCH PARTIAL
is not yet implemented. (Of course,NOT NULL
constraints can be applied to the referencing column(s) to prevent these cases from arising.)In addition, when the data in the referenced columns is changed, certain actions are performed on the data in this table's columns. The
ON DELETE
clause specifies the action to perform when a referenced row in the referenced table is being deleted. Likewise, theON UPDATE
clause specifies the action to perform when a referenced column in the referenced table is being updated to a new value. If the row is updated, but the referenced column is not actually changed, no action is done. Referential actions other than theNO ACTION
check cannot be deferred, even if the constraint is declared deferrable. There are the following possible actions for each clause:NO ACTION
Produce an error indicating that the deletion or update would create a foreign key constraint violation. If the constraint is deferred, this error will be produced at constraint check time if there still exist any referencing rows. This is the default action.
RESTRICT
Produce an error indicating that the deletion or update would create a foreign key constraint violation. This is the same as
NO ACTION
except that the check is not deferrable.CASCADE
Delete any rows referencing the deleted row, or update the values of the referencing column(s) to the new values of the referenced columns, respectively.
SET NULL
Set the referencing column(s) to null.
SET DEFAULT
Set the referencing column(s) to their default values. (There must be a row in the referenced table matching the default values, if they are not null, or the operation will fail.)
If the referenced column(s) are changed frequently, it might be wise to add an index to the referencing column(s) so that referential actions associated with the foreign key constraint can be performed more efficiently.
DEFERRABLE
NOT DEFERRABLE
This controls whether the constraint can be deferred. A constraint that is not deferrable will be checked immediately after every command. Checking of constraints that are deferrable can be postponed until the end of the transaction (using the SET CONSTRAINTS command).
NOT DEFERRABLE
is the default. Currently, onlyUNIQUE
,PRIMARY KEY
,EXCLUDE
, andREFERENCES
(foreign key) constraints accept this clause.NOT NULL
andCHECK
constraints are not deferrable. Note that deferrable constraints cannot be used as conflict arbitrators in anINSERT
statement that includes anON CONFLICT DO UPDATE
clause.INITIALLY IMMEDIATE
INITIALLY DEFERRED
If a constraint is deferrable, this clause specifies the default time to check the constraint. If the constraint is
INITIALLY IMMEDIATE
, it is checked after each statement. This is the default. If the constraint isINITIALLY DEFERRED
, it is checked only at the end of the transaction. The constraint check time can be altered with the SET CONSTRAINTS command.USING
method
This optional clause specifies the table access method to use to store the contents for the new table; the method needs be an access method of type
TABLE
. See Chapter 60 for more information. If this option is not specified, the default table access method is chosen for the new table. See default_table_access_method for more information.WITH (
storage_parameter
[=value
] [, ... ] )This clause specifies optional storage parameters for a table or index; see Storage Parameters for more information. For backward-compatibility the
WITH
clause for a table can also includeOIDS=FALSE
to specify that rows of the new table should not contain OIDs (object identifiers),OIDS=TRUE
is not supported anymore.WITHOUT OIDS
This is backward-compatible syntax for declaring a table
WITHOUT OIDS
, creating a tableWITH OIDS
is not supported anymore.ON COMMIT
The behavior of temporary tables at the end of a transaction block can be controlled using
ON COMMIT
. The three options are:PRESERVE ROWS
No special action is taken at the ends of transactions. This is the default behavior.
DELETE ROWS
All rows in the temporary table will be deleted at the end of each transaction block. Essentially, an automatic TRUNCATE is done at each commit. When used on a partitioned table, this is not cascaded to its partitions.
DROP
The temporary table will be dropped at the end of the current transaction block. When used on a partitioned table, this action drops its partitions and when used on tables with inheritance children, it drops the dependent children.
TABLESPACE
tablespace_name
The
tablespace_name
is the name of the tablespace in which the new table is to be created. If not specified, default_tablespace is consulted, or temp_tablespaces if the table is temporary. For partitioned tables, since no storage is required for the table itself, the tablespace specified overridesdefault_tablespace
as the default tablespace to use for any newly created partitions when no other tablespace is explicitly specified.USING INDEX TABLESPACE
tablespace_name
This clause allows selection of the tablespace in which the index associated with a
UNIQUE
,PRIMARY KEY
, orEXCLUDE
constraint will be created. If not specified, default_tablespace is consulted, or temp_tablespaces if the table is temporary.
Storage Parameters
The WITH
clause can specify storage parameters for tables, and for indexes associated with a UNIQUE
, PRIMARY KEY
, or EXCLUDE
constraint. Storage parameters for indexes are documented in CREATE INDEX. The storage parameters currently available for tables are listed below. For many of these parameters, as shown, there is an additional parameter with the same name prefixed with toast.
, which controls the behavior of the table's secondary TOAST table, if any (see Section 69.2 for more information about TOAST). If a table parameter value is set and the equivalent toast.
parameter is not, the TOAST table will use the table's parameter value. Specifying these parameters for partitioned tables is not supported, but you may specify them for individual leaf partitions.
fillfactor
(integer
)The fillfactor for a table is a percentage between 10 and 100. 100 (complete packing) is the default. When a smaller fillfactor is specified,
INSERT
operations pack table pages only to the indicated percentage; the remaining space on each page is reserved for updating rows on that page. This givesUPDATE
a chance to place the updated copy of a row on the same page as the original, which is more efficient than placing it on a different page, and makes heap-only tuple updates more likely. For a table whose entries are never updated, complete packing is the best choice, but in heavily updated tables smaller fillfactors are appropriate. This parameter cannot be set for TOAST tables.toast_tuple_target
(integer
)The toast_tuple_target specifies the minimum tuple length required before we try to compress and/or move long column values into TOAST tables, and is also the target length we try to reduce the length below once toasting begins. This affects columns marked as External (for move), Main (for compression), or Extended (for both) and applies only to new tuples. There is no effect on existing rows. By default this parameter is set to allow at least 4 tuples per block, which with the default blocksize will be 2040 bytes. Valid values are between 128 bytes and the (blocksize - header), by default 8160 bytes. Changing this value may not be useful for very short or very long rows. Note that the default setting is often close to optimal, and it is possible that setting this parameter could have negative effects in some cases. This parameter cannot be set for TOAST tables.
parallel_workers
(integer
)This sets the number of workers that should be used to assist a parallel scan of this table. If not set, the system will determine a value based on the relation size. The actual number of workers chosen by the planner or by utility statements that use parallel scans may be less, for example due to the setting of max_worker_processes.
autovacuum_enabled
,toast.autovacuum_enabled
(boolean
)Enables or disables the autovacuum daemon for a particular table. If true, the autovacuum daemon will perform automatic
VACUUM
and/orANALYZE
operations on this table following the rules discussed in Section 24.1.6. If false, this table will not be autovacuumed, except to shrinkpg_xact
andpg_multixact
. See Section 24.1.5 for more about that. Note that the autovacuum daemon does not run at all (except to shrinkpg_xact
andpg_multixact
) if the autovacuum parameter is false; setting individual tables' storage parameters does not override that. Therefore there is seldom much point in explicitly setting this storage parameter totrue
, only tofalse
.vacuum_index_cleanup
,toast.vacuum_index_cleanup
(boolean
)Enables or disables index cleanup when
VACUUM
is run on this table. The default value istrue
. Disabling index cleanup can speed upVACUUM
very significantly, but may also lead to severely bloated indexes if table modifications are frequent. TheINDEX_CLEANUP
parameter of VACUUM, if specified, overrides the value of this option.vacuum_truncate
,toast.vacuum_truncate
(boolean
)Enables or disables vacuum to try to truncate off any empty pages at the end of this table. The default value is
true
. Iftrue
,VACUUM
and autovacuum do the truncation and the disk space for the truncated pages is returned to the operating system. Note that the truncation requiresACCESS EXCLUSIVE
lock on the table. TheTRUNCATE
parameter of VACUUM, if specified, overrides the value of this option.autovacuum_vacuum_threshold
,toast.autovacuum_vacuum_threshold
(integer
)Per-table value for autovacuum_vacuum_threshold parameter.
autovacuum_vacuum_scale_factor
,toast.autovacuum_vacuum_scale_factor
(floating point
)Per-table value for autovacuum_vacuum_scale_factor parameter.
autovacuum_analyze_threshold
(integer
)Per-table value for autovacuum_analyze_threshold parameter.
autovacuum_analyze_scale_factor
(floating point
)Per-table value for autovacuum_analyze_scale_factor parameter.
autovacuum_vacuum_cost_delay
,toast.autovacuum_vacuum_cost_delay
(floating point
)Per-table value for autovacuum_vacuum_cost_delay parameter.
autovacuum_vacuum_cost_limit
,toast.autovacuum_vacuum_cost_limit
(integer
)Per-table value for autovacuum_vacuum_cost_limit parameter.
autovacuum_freeze_min_age
,toast.autovacuum_freeze_min_age
(integer
)Per-table value for vacuum_freeze_min_age parameter. Note that autovacuum will ignore per-table
autovacuum_freeze_min_age
parameters that are larger than half the system-wide autovacuum_freeze_max_age setting.autovacuum_freeze_max_age
,toast.autovacuum_freeze_max_age
(integer
)Per-table value for autovacuum_freeze_max_age parameter. Note that autovacuum will ignore per-table
autovacuum_freeze_max_age
parameters that are larger than the system-wide setting (it can only be set smaller).autovacuum_freeze_table_age
,toast.autovacuum_freeze_table_age
(integer
)Per-table value for vacuum_freeze_table_age parameter.
autovacuum_multixact_freeze_min_age
,toast.autovacuum_multixact_freeze_min_age
(integer
)Per-table value for vacuum_multixact_freeze_min_age parameter. Note that autovacuum will ignore per-table
autovacuum_multixact_freeze_min_age
parameters that are larger than half the system-wide autovacuum_multixact_freeze_max_age setting.autovacuum_multixact_freeze_max_age
,toast.autovacuum_multixact_freeze_max_age
(integer
)Per-table value for autovacuum_multixact_freeze_max_age parameter. Note that autovacuum will ignore per-table
autovacuum_multixact_freeze_max_age
parameters that are larger than the system-wide setting (it can only be set smaller).autovacuum_multixact_freeze_table_age
,toast.autovacuum_multixact_freeze_table_age
(integer
)Per-table value for vacuum_multixact_freeze_table_age parameter.
log_autovacuum_min_duration
,toast.log_autovacuum_min_duration
(integer
)Per-table value for log_autovacuum_min_duration parameter.
user_catalog_table
(boolean
)Declare the table as an additional catalog table for purposes of logical replication. See Section 50.6.2 for details. This parameter cannot be set for TOAST tables.
Notes
Postgres Pro automatically creates an index for each unique constraint and primary key constraint to enforce uniqueness. Thus, it is not necessary to create an index explicitly for primary key columns. (See CREATE INDEX for more information.)
Unique constraints and primary keys are not inherited in the current implementation. This makes the combination of inheritance and unique constraints rather dysfunctional.
A table cannot have more than 1600 columns. (In practice, the effective limit is usually lower because of tuple-length constraints.)
Examples
Create table films
and table distributors
:
CREATE TABLE films ( code char(5) CONSTRAINT firstkey PRIMARY KEY, title varchar(40) NOT NULL, did integer NOT NULL, date_prod date, kind varchar(10), len interval hour to minute ); CREATE TABLE distributors ( did integer PRIMARY KEY GENERATED BY DEFAULT AS IDENTITY, name varchar(40) NOT NULL CHECK (name <> '') );
Create a table with a 2-dimensional array:
CREATE TABLE array_int ( vector int[][] );
Define a unique table constraint for the table films
. Unique table constraints can be defined on one or more columns of the table:
CREATE TABLE films ( code char(5), title varchar(40), did integer, date_prod date, kind varchar(10), len interval hour to minute, CONSTRAINT production UNIQUE(date_prod) );
Define a check column constraint:
CREATE TABLE distributors ( did integer CHECK (did > 100), name varchar(40) );
Define a check table constraint:
CREATE TABLE distributors ( did integer, name varchar(40), CONSTRAINT con1 CHECK (did > 100 AND name <> '') );
Define a primary key table constraint for the table films
:
CREATE TABLE films ( code char(5), title varchar(40), did integer, date_prod date, kind varchar(10), len interval hour to minute, CONSTRAINT code_title PRIMARY KEY(code,title) );
Define a primary key constraint for table distributors
. The following two examples are equivalent, the first using the table constraint syntax, the second the column constraint syntax:
CREATE TABLE distributors ( did integer, name varchar(40), PRIMARY KEY(did) ); CREATE TABLE distributors ( did integer PRIMARY KEY, name varchar(40) );
Assign a literal constant default value for the column name
, arrange for the default value of column did
to be generated by selecting the next value of a sequence object, and make the default value of modtime
be the time at which the row is inserted:
CREATE TABLE distributors ( name varchar(40) DEFAULT 'Luso Films', did integer DEFAULT nextval('distributors_serial'), modtime timestamp DEFAULT current_timestamp );
Define two NOT NULL
column constraints on the table distributors
, one of which is explicitly given a name:
CREATE TABLE distributors ( did integer CONSTRAINT no_null NOT NULL, name varchar(40) NOT NULL );
Define a unique constraint for the name
column:
CREATE TABLE distributors ( did integer, name varchar(40) UNIQUE );
The same, specified as a table constraint:
CREATE TABLE distributors ( did integer, name varchar(40), UNIQUE(name) );
Create the same table, specifying 70% fill factor for both the table and its unique index:
CREATE TABLE distributors ( did integer, name varchar(40), UNIQUE(name) WITH (fillfactor=70) ) WITH (fillfactor=70);
Create table circles
with an exclusion constraint that prevents any two circles from overlapping:
CREATE TABLE circles ( c circle, EXCLUDE USING gist (c WITH &&) );
Create table cinemas
in tablespace diskvol1
:
CREATE TABLE cinemas ( id serial, name text, location text ) TABLESPACE diskvol1;
Create a composite type and a typed table:
CREATE TYPE employee_type AS (name text, salary numeric); CREATE TABLE employees OF employee_type ( PRIMARY KEY (name), salary WITH OPTIONS DEFAULT 1000 );
Create a range partitioned table:
CREATE TABLE measurement ( logdate date not null, peaktemp int, unitsales int ) PARTITION BY RANGE (logdate);
Create a range partitioned table with multiple columns in the partition key:
CREATE TABLE measurement_year_month ( logdate date not null, peaktemp int, unitsales int ) PARTITION BY RANGE (EXTRACT(YEAR FROM logdate), EXTRACT(MONTH FROM logdate));
Create a list partitioned table:
CREATE TABLE cities ( city_id bigserial not null, name text not null, population bigint ) PARTITION BY LIST (left(lower(name), 1));
Create a hash partitioned table:
CREATE TABLE orders ( order_id bigint not null, cust_id bigint not null, status text ) PARTITION BY HASH (order_id);
Create partition of a range partitioned table:
CREATE TABLE measurement_y2016m07 PARTITION OF measurement ( unitsales DEFAULT 0 ) FOR VALUES FROM ('2016-07-01') TO ('2016-08-01');
Create a few partitions of a range partitioned table with multiple columns in the partition key:
CREATE TABLE measurement_ym_older PARTITION OF measurement_year_month FOR VALUES FROM (MINVALUE, MINVALUE) TO (2016, 11); CREATE TABLE measurement_ym_y2016m11 PARTITION OF measurement_year_month FOR VALUES FROM (2016, 11) TO (2016, 12); CREATE TABLE measurement_ym_y2016m12 PARTITION OF measurement_year_month FOR VALUES FROM (2016, 12) TO (2017, 01); CREATE TABLE measurement_ym_y2017m01 PARTITION OF measurement_year_month FOR VALUES FROM (2017, 01) TO (2017, 02);
Create partition of a list partitioned table:
CREATE TABLE cities_ab PARTITION OF cities ( CONSTRAINT city_id_nonzero CHECK (city_id != 0) ) FOR VALUES IN ('a', 'b');
Create partition of a list partitioned table that is itself further partitioned and then add a partition to it:
CREATE TABLE cities_ab PARTITION OF cities ( CONSTRAINT city_id_nonzero CHECK (city_id != 0) ) FOR VALUES IN ('a', 'b') PARTITION BY RANGE (population); CREATE TABLE cities_ab_10000_to_100000 PARTITION OF cities_ab FOR VALUES FROM (10000) TO (100000);
Create partitions of a hash partitioned table:
CREATE TABLE orders_p1 PARTITION OF orders FOR VALUES WITH (MODULUS 4, REMAINDER 0); CREATE TABLE orders_p2 PARTITION OF orders FOR VALUES WITH (MODULUS 4, REMAINDER 1); CREATE TABLE orders_p3 PARTITION OF orders FOR VALUES WITH (MODULUS 4, REMAINDER 2); CREATE TABLE orders_p4 PARTITION OF orders FOR VALUES WITH (MODULUS 4, REMAINDER 3);
Create a default partition:
CREATE TABLE cities_partdef PARTITION OF cities DEFAULT;
Create a range-partitioned table using pg_pathman
:
CREATE TABLE journal ( id SERIAL NOT NULL, dt TIMESTAMP NOT NULL, msg TEXT ) PARTITION BY RANGE (id) ( PARTITION journal_100 VALUES LESS THAN (100), PARTITION journal_200 VALUES LESS THAN (200) );
Create a range-partitioned table using pg_pathman
and enable automatic partition creation with interval 50:
CREATE TABLE journal ( id SERIAL NOT NULL, dt TIMESTAMP NOT NULL, msg TEXT ) PARTITION BY RANGE (id) INTERVAL (50) ( PARTITION journal_100 VALUES LESS THAN (100), PARTITION journal_200 VALUES LESS THAN (200) );
Create a hash-partitioned table with five partitions using pg_pathman
:
CREATE TABLE journal(id serial NOT NULL) PARTITION BY HASH (id) PARTITIONS (5);
Compatibility
The CREATE TABLE
command conforms to the SQL standard, with exceptions listed below.
Temporary Tables
Although the syntax of CREATE TEMPORARY TABLE
resembles that of the SQL standard, the effect is not the same. In the standard, temporary tables are defined just once and automatically exist (starting with empty contents) in every session that needs them. Postgres Pro instead requires each session to issue its own CREATE TEMPORARY TABLE
command for each temporary table to be used. This allows different sessions to use the same temporary table name for different purposes, whereas the standard's approach constrains all instances of a given temporary table name to have the same table structure.
The standard's definition of the behavior of temporary tables is widely ignored. Postgres Pro's behavior on this point is similar to that of several other SQL databases.
The SQL standard also distinguishes between global and local temporary tables, where a local temporary table has a separate set of contents for each SQL module within each session, though its definition is still shared across sessions. Since Postgres Pro does not support SQL modules, this distinction is not relevant in Postgres Pro.
For compatibility's sake, Postgres Pro will accept the GLOBAL
and LOCAL
keywords in a temporary table declaration, but they currently have no effect. Use of these keywords is discouraged, since future versions of Postgres Pro might adopt a more standard-compliant interpretation of their meaning.
The ON COMMIT
clause for temporary tables also resembles the SQL standard, but has some differences. If the ON COMMIT
clause is omitted, SQL specifies that the default behavior is ON COMMIT DELETE ROWS
. However, the default behavior in Postgres Pro is ON COMMIT PRESERVE ROWS
. The ON COMMIT DROP
option does not exist in SQL.
Non-Deferred Uniqueness Constraints
When a UNIQUE
or PRIMARY KEY
constraint is not deferrable, Postgres Pro checks for uniqueness immediately whenever a row is inserted or modified. The SQL standard says that uniqueness should be enforced only at the end of the statement; this makes a difference when, for example, a single command updates multiple key values. To obtain standard-compliant behavior, declare the constraint as DEFERRABLE
but not deferred (i.e., INITIALLY IMMEDIATE
). Be aware that this can be significantly slower than immediate uniqueness checking.
Column Check Constraints
The SQL standard says that CHECK
column constraints can only refer to the column they apply to; only CHECK
table constraints can refer to multiple columns. Postgres Pro does not enforce this restriction; it treats column and table check constraints alike.
EXCLUDE
Constraint
The EXCLUDE
constraint type is a Postgres Pro extension.
Foreign Key Constraints
It is a PostgreSQL extension that a foreign key constraint may reference columns of a unique index instead of columns of a primary key or unique constraint.
NULL
“Constraint”
The NULL
“constraint” (actually a non-constraint) is a Postgres Pro extension to the SQL standard that is included for compatibility with some other database systems (and for symmetry with the NOT NULL
constraint). Since it is the default for any column, its presence is simply noise.
Constraint Naming
The SQL standard says that table and domain constraints must have names that are unique across the schema containing the table or domain. Postgres Pro is laxer: it only requires constraint names to be unique across the constraints attached to a particular table or domain. However, this extra freedom does not exist for index-based constraints (UNIQUE
, PRIMARY KEY
, and EXCLUDE
constraints), because the associated index is named the same as the constraint, and index names must be unique across all relations within the same schema.
Currently, Postgres Pro does not record names for NOT NULL
constraints at all, so they are not subject to the uniqueness restriction. This might change in a future release.
Inheritance
Multiple inheritance via the INHERITS
clause is a Postgres Pro language extension. SQL:1999 and later define single inheritance using a different syntax and different semantics. SQL:1999-style inheritance is not yet supported by Postgres Pro.
Zero-Column Tables
Postgres Pro allows a table of no columns to be created (for example, CREATE TABLE foo();
). This is an extension from the SQL standard, which does not allow zero-column tables. Zero-column tables are not in themselves very useful, but disallowing them creates odd special cases for ALTER TABLE DROP COLUMN
, so it seems cleaner to ignore this spec restriction.
Multiple Identity Columns
Postgres Pro allows a table to have more than one identity column. The standard specifies that a table can have at most one identity column. This is relaxed mainly to give more flexibility for doing schema changes or migrations. Note that the INSERT
command supports only one override clause that applies to the entire statement, so having multiple identity columns with different behaviors is not well supported.
Generated Columns
The option STORED
is not standard but is also used by other SQL implementations. The SQL standard does not specify the storage of generated columns.
LIKE
Clause
While a LIKE
clause exists in the SQL standard, many of the options that Postgres Pro accepts for it are not in the standard, and some of the standard's options are not implemented by Postgres Pro.
WITH
Clause
The WITH
clause is a Postgres Pro extension; storage parameters are not in the standard.
Tablespaces
The Postgres Pro concept of tablespaces is not part of the standard. Hence, the clauses TABLESPACE
and USING INDEX TABLESPACE
are extensions.
Typed Tables
Typed tables implement a subset of the SQL standard. According to the standard, a typed table has columns corresponding to the underlying composite type as well as one other column that is the “self-referencing column”. Postgres Pro does not support self-referencing columns explicitly.
PARTITION BY
Clause
The PARTITION BY
clause is a Postgres Pro extension.
PARTITION OF
Clause
The PARTITION OF
clause is a Postgres Pro extension.