F.40. pg_pathman

The pg_pathman is a Postgres Pro extension that provides an optimized partitioning solution for large and distributed databases. Using pg_pathman, you can:

  • Partition large databases without downtime.

  • Speed up query execution for partitioned tables.

  • Manage existing partitions and add new partitions on the fly.

  • Add foreign tables as partitions.

  • Join partitioned tables for read and write operations.

The extension is compatible with Postgres Pro 9.5 or higher.

F.40.1. Installation and Setup

The pg_pathman extension is included into the Postgres Pro. Once you have Postgres Pro installed, complete the following steps to enable pg_pathman:

  1. Add pg_pathman to the shared_preload_libraries variable in the postgresql.conf file:

    shared_preload_libraries = 'pg_pathman'
    

    Important

    pg_pathman may have conflicts with other extensions that use the same hook functions. For example, pg_pathman may interfere with the pg_stat_statements extension as they both use ProcessUtility_hook. To avoid such issues, pg_pathman must always be the last in the list of libraries: shared_preload_libraries = 'pg_stat_statements, pg_pathman'

  2. Restart the Postgres Pro instance for the settings to take effect.

  3. Create the pg_pathman extension as follows:

    CREATE SCHEMA pathman;
    GRANT USAGE ON SCHEMA pathman TO PUBLIC;
    CREATE EXTENSION pg_pathman WITH SCHEMA pathman;
    

    Important

    To ensure that your calls to pg_pathman's functions are always secure against search_path-based attacks (see CREATE EXTENSION for details), install it only into a clean schema where nobody except superusers has the CREATE privilege for database objects.

Once pg_pathman is enabled, you can start partitioning tables.

Note

During installation, pg_pathman creates a few RLS policies to restrict access to its own tables. Postgres Pro core, however, does not support dump/restore of databases where extensions issuing CREATE POLICY statements are installed. Therefore, when restoring a dump of a database where pg_pathman is installed, you will get error messages such as:

ERROR: policy "allow_select" for table "pathman_config" already exists

Ignore them since they do not affect whether the data being restored is complete.

Tip

You can also build pg_pathman from source code by executing the following command in the pg_pathman directory:

make install USE_PGXS=1

When this operation is complete, follow the steps described above to complete the setup.

In addition, do not forget to set the PG_CONFIG variable if you want to test pg_pathman on a custom build of Postgres Pro. For details, see Building and Installing PostgreSQL Extension Modules.

You can toggle pg_pathman or its specific custom nodes on and off using GUC variables. For details, see Section F.40.5.1.

If you want to permanently disable pg_pathman for a previously partitioned table, use the disable_pathman_for() function:

SELECT disable_pathman_for('range_rel');

All sections and data will remain unchanged and will be handled by the standard Postgres Pro inheritance mechanism.

F.40.1.1. Updating pg_pathman

If you already have a previous version of pg_pathman installed, complete the following steps to upgrade to a newer version:

  1. Install Postgres Pro.

  2. Restart your Postgres Pro cluster.

  3. If you are running a previous major version of pg_pathman (the second digit in the version number is different), complete the update as follows:

    ALTER EXTENSION pg_pathman UPDATE TO version;
    SET pg_pathman.enable = t;
    

    where version is the pg_pathman major version number, such as 1.5.

    You can check the current pg_pathman version by running the pathman_version() function.

F.40.2. Usage

Choosing Partitioning Strategies

Running Non-Blocking Data Migration

Partitioning by a Single Expression

Partitioning by Composite Key

Running Multilevel Partitioning

Using Declarative Syntax

Managing Partitions

As your database grows, indexing mechanisms may become inefficient and cause high latency as you run queries. To improve performance, ensure scalability, and optimize database administration processes you can use partitioning — splitting a large table into smaller pieces, with each row moved to a single partition according to the partitioning key.

Traditionally, Postgres Pro has supported partitioning via table inheritance, with each partition created as a child table with a CHECK constraint. In Postgres Pro 10, support for declarative partitioning was added, which also relies on inheritance. With these approaches, the query planner has to perform an exhaustive search and check constraints on each partition to build a query plan, which may slow down queries for tables with a large number of partitions. The pg_pathman extension uses an optimized planning algorithms and partitioning functions based on the internal structure of the partitioned tables, which allows to achieve better performance results. For details on pg_pathman implementation specifics, see Section F.40.4.

F.40.2.1. Choosing Partitioning Strategies

The pg_pathman extension supports the following partitioning strategies:

  • Hash — maps rows to partitions using a generic hash function. Choose this strategy if most of your queries will be of the exact-match type.

  • Range — maps rows to partitions based on partitioning key ranges assigned to each partition. Choose this strategy if your database contains numeric data that you are likely to query or manage by ranges. For example, you may want to query historical data by years, or review experiment results by specific numeric ranges. To achieve performance gains, pg_pathman uses the binary search algorithm.

By default, pg_pathman migrates all data from the parent table to the newly created partitions at once (blocking partitioning). This approach enables you to restructure the table in a single transaction, but may cause downtime if you have a lot of data. If it is critical to avoid downtime, you can use concurrent partitioning. In this case, pg_pathman writes all the updates to the newly created partitions, but keeps the original data in the parent table until you explicitly migrate it. This enables you to partition large databases without downtime, as you can choose convenient time for migration and copy data in small batches without blocking other transactions. For details on concurrent partitioning, see Section F.40.2.2.

F.40.2.1.1. Setting up Hash Partitioning

To perform hash partitioning with pg_pathman, run the create_hash_partitions() function:

create_hash_partitions(parent_relid     REGCLASS,
                       expression       TEXT,
                       partitions_count INTEGER,
                       partition_data   BOOLEAN DEFAULT TRUE,
                       partition_names  TEXT[] DEFAULT NULL,
                       tablespaces      TEXT[] DEFAULT NULL)

The pg_pathman module creates the specified number of partitions based on the hash function. Optionally, you can specify partition names and tablespaces by setting partition_names and tablespaces options, respectively.

You cannot add or remove partitions after the parent table is split. If required, you can replace the specified partition with another table:

replace_hash_partition(old_partition       REGCLASS,
                       new_partition       REGCLASS,
                       lock_parent         BOOL DEFAULT TRUE);

When set to true, lock_parent parameter will prevent any INSERT/UPDATE/ALTER TABLE queries to parent table.

If you omit the optional partition_data parameter or set it to true, all the data from the parent table gets migrated to partitions. The pg_pathman module blocks the table for other transactions until data migration completes. To avoid downtime, you can set the partition_data parameter to false and later use the partition_table_concurrently() function to migrate your data to partitions without blocking other queries. For details, see the Section F.40.2.2.

F.40.2.1.2. Setting up Range Partitioning

The pg_pathman module provides the create_range_partitions() for range partitioning. This function creates partitions based on the specified interval and the initial partitioning key value. New partitions are created automatically when you insert data outside of the already covered range.

create_range_partitions(parent_relid   REGCLASS,
                        expression     TEXT,
                        start_value    ANYELEMENT,
                        p_interval     ANYELEMENT | INTERVAL,
                        p_count        INTEGER DEFAULT NULL,
                        partition_data BOOLEAN DEFAULT TRUE)

The pg_pathman module creates partitions based on the specified parameters. If you omit the optional p_count parameter, pg_pathman calculates the required number of partitions based on the specified start value and interval. If you insert new data outside of the existing partition range, pg_pathman creates new partitions automatically, keeping the specified interval. This approach ensures that all partitions are of the same size, which can improve query performance and facilitate database management.

Alternatively, you can specify an array defining the bounds of partitions to be created using the bounds parameter:

create_range_partitions(parent_relid    REGCLASS,
                        expression      TEXT,
                        bounds          ANYARRAY,
                        partition_names TEXT[] DEFAULT NULL,
                        tablespaces     TEXT[] DEFAULT NULL,
                        partition_data  BOOLEAN DEFAULT TRUE)

If required, you can also use partition management functions to add partitions manually. For example, if there is a gap between the created partitions, pg_pathman cannot fill it with a new partition in an automated mode.

By default, all the data from the parent table gets migrated to the specified number of partitions. The pg_pathman module blocks the table for other transactions until data migration completes. To avoid downtime, you can set the partition_data parameter to false and later use the partition_table_concurrently() function to migrate your data to partitions without blocking other queries. For details, see the Section F.40.2.2.

F.40.2.2. Running Non-Blocking Data Migration

If it is critical to avoid downtime, you can perform concurrent partitioning by setting the partition_data parameter of the partitioning function to false. In this case, pg_pathman creates empty partitions, keeping all the original data in the parent table. At the same time, all the database updates are written to the newly created partitions. You can later migrate the original data to partitions without blocking other queries using the partition_table_concurrently() function:

partition_table_concurrently(relation   REGCLASS,
                             batch_size INTEGER DEFAULT 1000,
                             sleep_time FLOAT8 DEFAULT 1.0)

where:

  • relation is the parent table.

  • batch_size is the number of rows to copy from the parent table to partitions at a time. You can set this parameter to any integer value from 1 to 10000.

  • sleep_time is the time interval between migration attempts, in seconds.

The pg_pathman module starts a background worker to move the data from the parent table to partitions in small batches of the specified batch_size. If one or more rows in the batch are locked by other queries, pg_pathman waits for the specified sleep_time and tries again, up to 60 times. You can monitor the migration process in the pathman_concurrent_part_tasks view that shows the number of rows migrated so far:

[user]postgres: select * from pathman_concurrent_part_tasks ;
 userid |  pid  | dbid  | relid | processed | status
--------+-------+-------+-------+-----------+---------
 user   | 20012 | 12413 | test  |    334000 | working
(1 row)

If you need to stop data migration, run the stop_concurrent_part_task() function at any time:

SELECT stop_concurrent_part_task(relation REGCLASS);

pg_pathman completes the migration of the current batch and terminates the migration process.

Tip

When pg_pathman migrates all the data from the parent table, you can exclude the parent table from the query plan. See the set_enable_parent() function description for details.

F.40.2.3. Partitioning by a Single Expression

For both range and hash partitioning strategies, pg_pathman supports partitioning by expression that returns a single scalar value. The partitioning expression can reference a table column, as well as calculate the partitioning key based on one or more column values.

Tip

If you would like to partition a table by a tuple, see Section F.40.2.4.

To partition a table by expression, use pg_pathman partitioning functions. The partitioning expression must satisfy the following conditions:

  • Expression must reference at least one column of the partitioned table.

  • All referenced columns must be marked as NOT NULL.

  • Expression cannot reference system attributes, such as oid, xmin, xmax, etc.

  • Expression cannot include subqueries.

  • All functions used by expression must be marked as IMMUTABLE.

As the expression can return a value of virtually any type, make sure to convert it to the type you need for partitioning.

To access a partition, you must use the exact expression used for partitioning. Otherwise, pg_pathman cannot optimize the query. You can view the partitioning expression for each partitioned table in the pathman_config table.

F.40.2.3.1. Examples

Suppose you have the test table that stores some jsonb data:

CREATE TABLE test(col jsonb NOT NULL);
INSERT INTO test
SELECT format('{"key": %s, "date": "%s", "value": "%s"}',
              i, current_date, md5(i::text))::jsonb
FROM generate_series(1, 10000 * 10) as g(i);

To partition this data by range of the key value, you need to extract this value from the jsonb object and convert it to a numeric type, such as bigint:

SELECT create_range_partitions('test', '(col->>''key'')::bigint', 1, 10000, 10);

pg_pathman splits the parent table into ten partitions, with each partition storing 10000 rows:

SELECT * FROM pathman_partition_list;
 parent | partition | parttype |              expr               | range_min | range_max
--------+-----------+----------+---------------------------------+-----------+-----------
 test   | test_1    |        2 | ((col ->> 'key'::text))::bigint | 1         | 10001
 test   | test_2    |        2 | ((col ->> 'key'::text))::bigint | 10001     | 20001
 test   | test_3    |        2 | ((col ->> 'key'::text))::bigint | 20001     | 30001
 test   | test_4    |        2 | ((col ->> 'key'::text))::bigint | 30001     | 40001
 test   | test_5    |        2 | ((col ->> 'key'::text))::bigint | 40001     | 50001
 test   | test_6    |        2 | ((col ->> 'key'::text))::bigint | 50001     | 60001
 test   | test_7    |        2 | ((col ->> 'key'::text))::bigint | 60001     | 70001
 test   | test_8    |        2 | ((col ->> 'key'::text))::bigint | 70001     | 80001
 test   | test_9    |        2 | ((col ->> 'key'::text))::bigint | 80001     | 90001
 test   | test_10   |        2 | ((col ->> 'key'::text))::bigint | 90001     | 100001
(10 rows)

F.40.2.4. Partitioning by Composite Key

Using pg_pathman, you can also perform range partitioning by composite key. A composite key consists of two or more comma-separated values, which can be columns or expressions extracting the values from the table. The expressions defining the composite key must satisfy the conditions described in Section F.40.2.3.

Although pg_pathman does not support automatic partition creation by composite key, you can add partitions using the add_range_partition() function. A typical workflow is as follows:

  1. Enable automatic partition naming for your table by running the create_naming_sequence() function.

  2. Create a composite partitioning key.

  3. Register a table you are going to partition with pg_pathman using the add_to_pathman_config() function.

  4. Add a partition based on the defined composite partitioning key using the add_range_partition() function.

F.40.2.4.1. Examples

Suppose you have the test table that stores some temporal data:

CREATE TABLE test (logdate date NOT NULL, comment text);

To partition this data by month and year, you have to create a composite key:

CREATE TYPE test_key AS (year float8, month float8);

To enable automatic partition naming, run the create_naming_sequence() function passing the table name as an argument:

SELECT create_naming_sequence('test');

Register the test table with pg_pathman, specifying the partitioning key you are going to use:

SELECT add_to_pathman_config('test',
                             '( extract(year from logdate),
                                extract(month from logdate) )::test_key',
                             NULL);

Create a partition that includes all the data in the range of ten years, starting from January of the current year:

SELECT add_range_partition('test',
                           (extract(year from current_date), 1)::test_key,
                           (extract(year from current_date + '10 years'::interval), 1)::test_key);

F.40.2.5. Running Multilevel Partitioning

pg_pathman supports multilevel partitioning for both hash and range partitioning strategies. You can use partitioning strategies in any combination: a hash- or range-partitioned table can be further partitioned by both hash or range.

To split an existing partition into several child ones, use the regular pg_pathman partitioning functions as explained in Section F.40.2.1, passing the name of the partition to be split as the parent_relid parameter. You can check the exact partition names in the pathman_partition_list view.

When opting for the range-range partitioning combination, you can either choose a different partitioning expression, or use the same expression as for the parent table. In the latter case, if the selected range is larger than that of the parent partition, only those child partitions that intersect with the parent range will be in use. Other child partitions will remain empty unless their parent is merged with an adjacent partition that covers at least a part of their range.

F.40.2.5.1. Examples

Suppose you have the journal table with some logs, which is partitioned by month:

-- create an empty table
CREATE TABLE journal (
id      SERIAL,
dt      TIMESTAMP NOT NULL,
level   INTEGER,
msg     TEXT);

-- generate some log data into the table
INSERT INTO journal (dt, level, msg)
SELECT g, random() * 6, md5(g::text)
FROM generate_series('2015-01-01'::date, '2015-12-31'::date, '1 minute') as g;

-- partition the table by range
SELECT create_range_partitions('journal', 'dt', '2015-01-01'::date, '1 month'::interval);

If having smaller partitions makes more sense at some point, you can further split the partitions by hash or range. For example, to split the journal_1 partition into subpartitions by day, run:

SELECT create_range_partitions('journal_1', 'dt', '2015-01-01'::date, '1 day'::interval);

Similarly, you can use hash partitioning to create child partitions. For example, split the journal_2 partition into five partitions by hash using the id column as the partitioning key:

SELECT create_hash_partitions('journal_2', 'id', '5');

F.40.2.6. Using Declarative Syntax

Declarative syntax for partitioning enables you to define the partitioning strategy when creating a table, as well as partition existing tables and manage table partitions using SQL commands. Postgres Pro Enterprise offers the following implementations of declarative syntax:

  • Postgres Pro core functionality, described in detail in Section 5.10.2.

  • pg_pathman implementation of declarative syntax.

Depending on the chosen implementation, the available SQL command forms will differ, as explained in CREATE TABLE and ALTER TABLE descriptions.

To select a declarative partitioning implementation to use, configure the partition_backend parameter. The internal value turns on declarative partitioning provided by Postgres Pro core, while the pg_pathman value enables the pg_pathman implementation. For the CREATE TABLE command, you can override this setting by specifying the USING partition_backend clause. By default, pg_pathman implementation is enabled, which provides declarative range and hash partitioning as explained below.

When running the CREATE TABLE command, you can use the PARTITION BY clause to split the resulting table into partitions by range or hash.

To create a table partitioned by range, specify the partition names, the range of values to include into each partition and, optionally, a tablespace. For example:

CREATE TABLE abc(id serial NOT NULL)
    PARTITION BY RANGE(id)
    (
     PARTITION abc_100 VALUES LESS THAN (100) TABLESPACE ts1,
     PARTITION abc_200 VALUES LESS THAN (200) TABLESPACE ts2
    );

When creating a table partitioned by hash, you can either specify the number of partitions to create, or the exact partitions and tablespaces. For example, to create the abc table with three partitions, run:

CREATE TABLE abc(id serial NOT NULL)
    PARTITION BY HASH (id) PARTITIONS (3);

To define the exact partitions to create, use the following statement:

CREATE TABLE abc(id serial NOT NULL)
    PARTITION BY HASH (id)
    (
     PARTITION abc_first  TABLESPACE ts1,
     PARTITION abc_second TABLESPACE ts2
    );

To partition an already created table, you can use the ALTER TABLE command with the PARTITION BY clause. For example, to split the abc table into three hash partitions, run:

ALTER TABLE abc PARTITION BY HASH (id) PARTITIONS (3);

When performing range partitioning of an already created table, you have to specify the lower bound of the first partition, which must not be greater than the smallest value in the partition key column, and provide the partitioning interval that defines the range of values to include into a single partition:

ALTER TABLE abc PARTITION BY RANGE (id) START FROM (0) INTERVAL (2000);

If the table to partition contains a lot of data and it is critical to avoid downtime, consider using the optional CONCURRENTLY clause. In this case, pg_pathman first creates empty partitions, and then migrates the data in batches of 1000 rows. This clause can be used for both hash and range partitioning. For example:

ALTER TABLE abc PARTITION BY RANGE (id) START FROM (0) INTERVAL (50000) CONCURRENTLY;
ALTER TABLE abc PARTITION BY HASH (id) PARTITIONS (3) CONCURRENTLY;

pg_pathman declarative syntax also supports multilevel partitioning. Once the table is partitioned, you can run the ALTER TABLE command with the PARTITION BY clause on the partition that you would like to split. Consider the following example with hash partitioning:

CREATE TABLE test(a int NOT NULL, b int NOT NULL)
    PARTITION BY by hash(a) PARTITIONS (8);

ALTER TABLE test_1
    PARTITION BY hash(b) PARTITIONS (10);

As a result, the test table is split into eight hash partitions, and its test_1 partition is further split into ten partitions by another key.

The ALTER TABLE command can also be run with partition management clauses to add, remove, or modify partitions, as explained in ALTER TABLE. You can perform these actions on tables partitioned with pg_pathman regardless of the partition_backend setting.

F.40.2.7. Managing Partitions

pg_pathman provides multiple functions for easy partition management. For details, see Section F.40.5.3.4.

F.40.3. Examples

F.40.3.1. Common Tips

  • You can add partition column containing the names of the underlying partitions using the system attribute called tableoid:

    SELECT tableoid::regclass AS partition, * FROM partitioned_table;
    
  • Though indices on a parent table are not particularly useful (since the parent table is supposed to be empty), they act as prototypes for indices on partitions. For each index on the parent table, pg_pathman creates a similar index on each partition.

  • All running concurrent partitioning tasks can be listed using the pathman_concurrent_part_tasks view:

    SELECT * FROM pathman_concurrent_part_tasks;
    userid  | pid  | dbid  | relid | processed | status
    --------+------+-------+-------+-----------+---------
    user    | 7367 | 16384 | test  |    472000 | working
    (1 row)
    
  • The pathman_partition_list in conjunction with drop_range_partition() can be used to drop range partitions in a more flexible way compared to DROP TABLE:

    SELECT drop_range_partition(partition, false) /* move data to parent */
    FROM pathman_partition_list
    WHERE parent = 'part_test'::regclass AND range_min::int < 500;
    NOTICE:  1 rows copied from part_test_11
    NOTICE:  100 rows copied from part_test_1
    NOTICE:  100 rows copied from part_test_2
    drop_range_partition 
    ----------------------
    dummy_test_11
    dummy_test_1
    dummy_test_2
    (3 rows)
    
  • You can turn foreign tables into partitions using the attach_range_partition() function. Rows that were meant to be inserted into the parent will be redirected to foreign partitions using PartitionFilter. By default, it is only allowed to insert rows into partitions provided by postgres_fdw. This setting is controlled by the pg_pathman.insert_into_fdw variable. You must have superuser rights to change this setting.

F.40.3.2. Hash Partitioning

Consider an example of hash partitioning. First create a table with an integer column:

CREATE TABLE items (
id       SERIAL PRIMARY KEY,
name     TEXT,
code     BIGINT);

INSERT INTO items (id, name, code)
SELECT g, md5(g::text), random() * 100000
FROM generate_series(1, 100000) as g;

Now run the create_hash_partitions() function with appropriate arguments:

SELECT create_hash_partitions('items', 'id', 100);

This will create new partitions and move the data from the parent table to partitions.

Here is an example of the query performing filtering by partitioning key:

SELECT * FROM items WHERE id = 1234;
  id  |               name               | code
------+----------------------------------+------
 1234 | 81dc9bdb52d04dc20036dbd8313ed055 | 1855
(1 row)

EXPLAIN SELECT * FROM items WHERE id = 1234;
QUERY PLAN
------------------------------------------------------------------------------------
Append  (cost=0.28..8.29 rows=0 width=0)
->  Index Scan using items_34_pkey on items_34  (cost=0.28..8.29 rows=0 width=0)
Index Cond: (id = 1234)

Notice that the Append node contains only one child scan, which corresponds to the WHERE clause.

Important

Pay attention to the fact that pg_pathman excludes the parent table from the query plan.

To access the parent table, use the ONLY modifier:

EXPLAIN SELECT * FROM ONLY items;
QUERY PLAN
------------------------------------------------------
Seq Scan on items  (cost=0.00..0.00 rows=1 width=45)

F.40.3.3. Range Partitioning

Consider an example of range partitioning. Let's create a table containing some dummy logs:

CREATE TABLE journal (
id      SERIAL,
dt      TIMESTAMP NOT NULL,
level   INTEGER,
msg     TEXT);

-- similar index will also be created for each partition
CREATE INDEX ON journal(dt);

-- generate some data
INSERT INTO journal (dt, level, msg)
SELECT g, random() * 6, md5(g::text)
FROM generate_series('2015-01-01'::date, '2015-12-31'::date, '1 minute') as g;

Run the create_range_partitions() function to create partitions so that each partition would contain the data for one day:

SELECT create_range_partitions('journal', 'dt', '2015-01-01'::date, '1 day'::interval);

It will create 364 partitions and move the data from the parent table to partitions.

New partitions are appended automatically by insert trigger, but it can be done manually with the following functions:

-- add new partition with specified range
SELECT add_range_partition('journal', '2016-01-01'::date, '2016-01-07'::date);

-- append new partition with default range
SELECT append_range_partition('journal');

The first one creates a partition with specified range. The second one creates a partition with default interval and appends it to the partition list. It is also possible to attach an existing table as partition. For example, we may want to attach an archive table (or even foreign table from another server) for some outdated data:

CREATE FOREIGN TABLE journal_archive (
id      INTEGER NOT NULL,
dt      TIMESTAMP NOT NULL,
level   INTEGER,
msg     TEXT)
SERVER archive_server;

SELECT attach_range_partition('journal', 'journal_archive', '2014-01-01'::date, '2015-01-01'::date);

Important

The attached table must have the same columns as the partitioned table, except for the dropped columns. The attached columns must have the same type, collation, and NOT NULL settings as the original columns.

To merge two adjacent partitions, use the merge_range_partitions() function:

SELECT merge_range_partitions('journal_archive', 'journal_1');

To split partition by value, use the split_range_partition() function:

SELECT split_range_partition('journal_366', '2016-01-03'::date);

To detach partition, use the detach_range_partition() function:

SELECT detach_range_partition('journal_archive');

Here is an example of the query performing filtering by partitioning key:

SELECT * FROM journal WHERE dt >= '2015-06-01' AND dt < '2015-06-03';
id      |         dt          | level |               msg
--------+---------------------+-------+----------------------------------
217441  | 2015-06-01 00:00:00 |     2 | 15053892d993ce19f580a128f87e3dbf
217442  | 2015-06-01 00:01:00 |     1 | 3a7c46f18a952d62ce5418ac2056010c
217443  | 2015-06-01 00:02:00 |     0 | 92c8de8f82faf0b139a3d99f2792311d
...
(2880 rows)

EXPLAIN SELECT * FROM journal WHERE dt >= '2015-06-01' AND dt < '2015-06-03';
QUERY PLAN
------------------------------------------------------------------
Append  (cost=0.00..58.80 rows=0 width=0)
->  Seq Scan on journal_152  (cost=0.00..29.40 rows=0 width=0)
->  Seq Scan on journal_153  (cost=0.00..29.40 rows=0 width=0)
(3 rows)

F.40.4. Internals

pg_pathman stores partitioning configuration in the pathman_config table; each row contains a single entry for a partitioned table (relation name, partitioning column and its type). During the initialization stage the pg_pathman module caches some information about child partitions in the shared memory, which is used later for plan construction. Before a SELECT query is executed, pg_pathman traverses the condition tree in search of expressions like:

VARIABLE OP CONST

where VARIABLE is a partitioning key, OP is a comparison operator (supported operators are =, <, <=, >, >=), CONST is a scalar value. For example:

WHERE id = 150

Based on the partitioning type and condition's operator, pg_pathman searches for the corresponding partitions and builds the plan.

F.40.4.1. Custom Plan Nodes

pg_pathman provides a couple of custom plan nodes which aim to reduce execution time, namely:

  • RuntimeAppend (overrides Append plan node)

  • RuntimeMergeAppend (overrides MergeAppend plan node)

  • PartitionFilter (drop-in replacement for INSERT triggers)

  • PartitionRouter for cross-partition UPDATE queries instead of triggers

PartitionFilter acts as a proxy node for INSERT's child scan, which means it can redirect output tuples to the corresponding partition:

EXPLAIN (COSTS OFF)
INSERT INTO partitioned_table
SELECT generate_series(1, 10), random();
               QUERY PLAN
-----------------------------------------
 Insert on partitioned_table
   ->  Custom Scan (PartitionFilter)
         ->  Subquery Scan on "*SELECT*"
               ->  Result
(4 rows)

PartitionRouter is another proxy node used in conjunction with PartitionFilter to enable cross-partition UPDATE operations, for example, when you update any column of a partitioning key.

Important

The PartitionRouter node transforms cross-partition UPDATE commands into DELETE + INSERT. On Postgres Pro versions prior to 11, this operation is unsafe as pg_pathman cannot determine whether the updated row has been deleted or moved to another partition.

By default, PartitionRouter is disabled to avoid undesirable side effects. To enable this node, set the pg_pathman.enable_partitionrouter to on.

EXPLAIN (COSTS OFF)
UPDATE partitioned_table
SET value = value + 1 WHERE value = 2;
                    QUERY PLAN                     
---------------------------------------------------
 Update on partitioned_table_0
   ->  Custom Scan (PartitionRouter)
         ->  Custom Scan (PartitionFilter)
               ->  Seq Scan on partitioned_table_0
                     Filter: (value = 2)
(5 rows)

RuntimeAppend and RuntimeMergeAppend have much in common: they come in handy in a case when WHERE condition takes form of:

VARIABLE OP PARAM

This kind of expressions can no longer be optimized at planning time since the parameter's value is not known until the execution stage takes place. The problem can be solved by embedding the WHERE condition analysis routine into the original Append's code, thus making it pick only required scans out of a whole bunch of planned partition scans. This effectively boils down to creation of a custom node capable of performing such a check.

There are at least several cases that demonstrate usefulness of these nodes:

/* create table we're going to partition */
CREATE TABLE partitioned_table(id INT NOT NULL, payload REAL);

/* insert some data */
INSERT INTO partitioned_table
SELECT generate_series(1, 1000), random();

/* perform partitioning */
SELECT create_hash_partitions('partitioned_table', 'id', 100);

/* create ordinary table */
CREATE TABLE some_table AS SELECT generate_series(1, 100) AS VAL;
    
  • id = (select ... limit 1)

    EXPLAIN (COSTS OFF, ANALYZE) SELECT * FROM partitioned_table
    WHERE id = (SELECT * FROM some_table LIMIT 1);
                                                 QUERY PLAN
    ----------------------------------------------------------------------------------------------------
     Custom Scan (RuntimeAppend) (actual time=0.030..0.033 rows=1 loops=1)
       InitPlan 1 (returns $0)
         ->  Limit (actual time=0.011..0.011 rows=1 loops=1)
               ->  Seq Scan on some_table (actual time=0.010..0.010 rows=1 loops=1)
       ->  Seq Scan on partitioned_table_70 partitioned_table (actual time=0.004..0.006 rows=1 loops=1)
             Filter: (id = $0)
             Rows Removed by Filter: 9
     Planning time: 1.131 ms
     Execution time: 0.075 ms
    (9 rows)
    
    /* disable RuntimeAppend node */
    SET pg_pathman.enable_runtimeappend = f;
    
    EXPLAIN (COSTS OFF, ANALYZE) SELECT * FROM partitioned_table
    WHERE id = (SELECT * FROM some_table LIMIT 1);
                                        QUERY PLAN
    ----------------------------------------------------------------------------------
     Append (actual time=0.196..0.274 rows=1 loops=1)
       InitPlan 1 (returns $0)
         ->  Limit (actual time=0.005..0.005 rows=1 loops=1)
               ->  Seq Scan on some_table (actual time=0.003..0.003 rows=1 loops=1)
       ->  Seq Scan on partitioned_table_0 (actual time=0.014..0.014 rows=0 loops=1)
             Filter: (id = $0)
             Rows Removed by Filter: 6
       ->  Seq Scan on partitioned_table_1 (actual time=0.003..0.003 rows=0 loops=1)
             Filter: (id = $0)
             Rows Removed by Filter: 5
             ... /* more plans follow */
     Planning time: 1.140 ms
     Execution time: 0.855 ms
    (306 rows)
              

  • id = ANY (select ...)

    EXPLAIN (COSTS OFF, ANALYZE) SELECT * FROM partitioned_table
    WHERE id = any (SELECT * FROM some_table limit 4);
                                                    QUERY PLAN
    -----------------------------------------------------------------------------------------------------------
     Nested Loop (actual time=0.025..0.060 rows=4 loops=1)
       ->  Limit (actual time=0.009..0.011 rows=4 loops=1)
             ->  Seq Scan on some_table (actual time=0.008..0.010 rows=4 loops=1)
       ->  Custom Scan (RuntimeAppend) (actual time=0.002..0.004 rows=1 loops=4)
             ->  Seq Scan on partitioned_table_70 partitioned_table (actual time=0.001..0.001 rows=10 loops=1)
             ->  Seq Scan on partitioned_table_26 partitioned_table (actual time=0.002..0.003 rows=9 loops=1)
             ->  Seq Scan on partitioned_table_27 partitioned_table (actual time=0.001..0.002 rows=20 loops=1)
             ->  Seq Scan on partitioned_table_63 partitioned_table (actual time=0.001..0.002 rows=9 loops=1)
     Planning time: 0.771 ms
     Execution time: 0.101 ms
    (10 rows)
    
    /* disable RuntimeAppend node */
    SET pg_pathman.enable_runtimeappend = f;
    
    EXPLAIN (COSTS OFF, ANALYZE) SELECT * FROM partitioned_table
    WHERE id = any (SELECT * FROM some_table limit 4);
                                           QUERY PLAN
    -----------------------------------------------------------------------------------------
     Nested Loop Semi Join (actual time=0.531..1.526 rows=4 loops=1)
       Join Filter: (partitioned_table.id = some_table.val)
       Rows Removed by Join Filter: 3990
       ->  Append (actual time=0.190..0.470 rows=1000 loops=1)
             ->  Seq Scan on partitioned_table (actual time=0.187..0.187 rows=0 loops=1)
             ->  Seq Scan on partitioned_table_0 (actual time=0.002..0.004 rows=6 loops=1)
             ->  Seq Scan on partitioned_table_1 (actual time=0.001..0.001 rows=5 loops=1)
             ->  Seq Scan on partitioned_table_2 (actual time=0.002..0.004 rows=14 loops=1)
    ... /* 96 scans follow */
       ->  Materialize (actual time=0.000..0.000 rows=4 loops=1000)
             ->  Limit (actual time=0.005..0.006 rows=4 loops=1)
                   ->  Seq Scan on some_table (actual time=0.003..0.004 rows=4 loops=1)
     Planning time: 2.169 ms
     Execution time: 2.059 ms
    (110 rows)
              

  • NestLoop involving a partitioned table, which is omitted since it's occasionally shown above.

To learn more about custom nodes, see Alexander Korotkov's blog.

F.40.5. Reference

F.40.5.1. GUC Variables

There are several user-accessible GUC variables designed to toggle pg_pathman or its specific custom nodes on and off.

  • pg_pathman.enable — enable/disable the pg_pathman module.

    Default: on

  • pg_pathman.enable_runtimeappend — toggle the RuntimeAppend custom node on/off.

    Default: on

  • pg_pathman.enable_runtimemergeappend — toggle the RuntimeMergeAppend custom node on/off.

    Default: on

  • pg_pathman.enable_partitionfilter — toggle the PartitionFilter custom node on/off to enable/disable cross-partition INSERT operations.

    Default: on

  • pg_pathman.enable_partitionrouter — toggle the PartitionRouter custom node on/off to enable/disable cross-partition UPDATE operations.

    Default: off

  • pg_pathman.enable_auto_partition — toggle automatic partition creation on/off (per session).

    Default: on

  • pg_pathman.enable_bounds_cache — toggle bounds cache on/off.

    Default: on

  • pg_pathman.insert_into_fdw — allow INSERT operations into various foreign-data wrappers. Possible values: disabled, postgres, and any_fdw.

    Default: postgres

  • pg_pathman.override_copy — toggle COPY statement hooking on/off.

    Default: on

F.40.5.2. Views and Tables

F.40.5.2.1. pathman_config

This table stores the list of partitioned tables. This is the main configuration storage.

CREATE TABLE IF NOT EXISTS pathman_config (
    partrel         REGCLASS NOT NULL PRIMARY KEY,
    attname         TEXT NOT NULL,
    parttype        INTEGER NOT NULL,
    range_interval  TEXT);
F.40.5.2.2. pathman_config_params

This table stores optional parameters that override standard pg_pathman behavior.

CREATE TABLE IF NOT EXISTS pathman_config_params (
    partrel        REGCLASS NOT NULL PRIMARY KEY,
    enable_parent  BOOLEAN NOT NULL DEFAULT TRUE,
    auto           BOOLEAN NOT NULL DEFAULT TRUE,
    init_callback  REGPROCEDURE NOT NULL DEFAULT 0,
    spawn_using_bgw BOOLEAN NOT NULL DEFAULT FALSE);
F.40.5.2.3. pathman_concurrent_part_tasks

This view lists all currently running concurrent partitioning tasks.

-- helper SRF function
CREATE OR REPLACE FUNCTION show_concurrent_part_tasks()
RETURNS TABLE (
    userid     REGROLE,
    pid        INT,
    dbid       OID,
    relid      REGCLASS,
    processed  INT,
    status     TEXT)
AS 'pg_pathman', 'show_concurrent_part_tasks_internal'
LANGUAGE C STRICT;

CREATE OR REPLACE VIEW pathman_concurrent_part_tasks
AS SELECT * FROM show_concurrent_part_tasks();
F.40.5.2.4. pathman_partition_list

This view lists all existing partitions, as well as their parents and range boundaries (NULL for hash partitions).

-- helper SRF function
CREATE OR REPLACE FUNCTION show_partition_list()
RETURNS TABLE (
    parent     REGCLASS,
    partition  REGCLASS,
    parttype   INT4,
    expr       TEXT,
    range_min  TEXT,
    range_max  TEXT)
AS 'pg_pathman', 'show_partition_list_internal'
LANGUAGE C STRICT;

CREATE OR REPLACE VIEW pathman_partition_list
AS SELECT * FROM show_partition_list();

F.40.5.3. Functions

F.40.5.3.1. Partitioning Functions
create_hash_partitions(parent_relid     REGCLASS,
                       expression       TEXT,
                       partitions_count INTEGER,
                       partition_data   BOOLEAN DEFAULT TRUE,
                       partition_names  TEXT[] DEFAULT NULL,
                       tablespaces      TEXT[] DEFAULT NULL)

Performs hash partitioning for relation by integer key expression. The partitions_count parameter specifies the number of partitions to create; it cannot be changed afterwards. If partition_data is true, all the data will be automatically migrated from the parent table to partitions. Note that data migration may take a while to finish and the table will be locked until transaction commits. See partition_table_concurrently() for a lock-free way to migrate data. Partition creation callback is invoked for each partition if set beforehand (see set_init_callback()).

create_range_partitions(relation       REGCLASS,
                        expression     TEXT,
                        start_value    ANYELEMENT,
                        p_interval     ANYELEMENT,
                        p_count        INTEGER DEFAULT NULL,
                        partition_data BOOLEAN DEFAULT TRUE)

create_range_partitions(relation       REGCLASS,
                        expression     TEXT,
                        start_value    ANYELEMENT,
                        p_interval     INTERVAL,
                        p_count        INTEGER DEFAULT NULL,
                        partition_data BOOLEAN DEFAULT TRUE)

create_range_partitions(relation        REGCLASS,
                        expression      TEXT,
                        bounds          ANYARRAY,
                        partition_names TEXT[] DEFAULT NULL,
                        tablespaces     TEXT[] DEFAULT NULL,
                        partition_data  BOOLEAN DEFAULT TRUE)

Performs range partitioning for relation by partitioning key defined by expression. The start_value argument specifies the initial value, p_interval sets the default range for automatically created partitions or partitions created with append_range_partition() or prepend_range_partition(). If p_interval is set to NULL, automatic partition creation is disabled. p_count is the number of premade partitions. If p_count is not set, than pg_pathman tries to determine the number of partitions based on the expression value. The bounds array defines the bounds for partitions to be created. You can build this array using the generate_range_bounds() function. Partition creation callback is invoked for each partition if set beforehand.

F.40.5.3.2. Data Migration Functions
partition_table_concurrently(relation REGCLASS,
                             batch_size INTEGER DEFAULT 1000,
                             sleep_time FLOAT8 DEFAULT 1.0)

Starts a background worker to move data from parent table to partitions. The worker utilizes short transactions to copy small batches of data (up to 10K rows per transaction) and thus doesn't significantly interfere with user's activity.

stop_concurrent_part_task(relation REGCLASS)

Stops a background worker performing a concurrent partitioning task. Note: worker will exit after it finishes relocating a current batch.

F.40.5.3.3. Triggers

Triggers are no longer required for INSERT and cross-partition UPDATE operations. However, user-supplied triggers are supported:

  • Each inserted row results in execution of BEFORE/AFTER INSERT trigger functions of a corresponding partition.

  • Each updated row results in execution of BEFORE/AFTER UPDATE trigger functions of a corresponding partition.

  • Each moved row (cross-partition update) results in execution of BEFORE UPDATE + BEFORE/AFTER DELETE + BEFORE/AFTER INSERT trigger functions of corresponding partitions.

F.40.5.3.4. Partition Management Functions
replace_hash_partition(old_partition       REGCLASS,
                       new_partition       REGCLASS,
                       lock_parent         BOOLEAN DEFAULT TRUE)

Replaces the specified partition of hash-partitioned table with another table. When set to true, the lock_parent parameter prevents any INSERT/UPDATE/ALTER TABLE queries to the parent table.

split_range_partition(partition_relid  REGCLASS,
                      split_value      ANYELEMENT,
                      partition_name   TEXT DEFAULT NULL,
                      tablespace       TEXT DEFAULT NULL)

Split range partition in two by value, with the specified value included into the second partition. Partition creation callback is invoked for a new partition if available.

merge_range_partitions(variadic partitions REGCLASS[])
      

Merge several adjacent range partitions. Partitions are automatically ordered by increasing bounds. All the data will be accumulated in the first partition, while other merged partitions are removed. If the remaining partition has any child partitions, new child partitions for the merged data will be created as required using the same partitioning expression.

append_range_partition(parent_relid   REGCLASS,
                       partition_name TEXT DEFAULT NULL,
                       tablespace     TEXT DEFAULT NULL)

Append new range partition with pathman_config.range_interval as interval.

prepend_range_partition(parent_relid   REGCLASS,
                        partition_name TEXT DEFAULT NULL,
                        tablespace     TEXT DEFAULT NULL)

Prepend new range partition with pathman_config.range_interval as interval.

add_range_partition(parent_relid   REGCLASS,
                    start_value    ANYELEMENT,
                    end_value      ANYELEMENT,
                    partition_name TEXT DEFAULT NULL,
                    tablespace     TEXT DEFAULT NULL)

Create a new range partition for relation with the specified range bounds. If the start_value or the end_value is NULL, the corresponding range bound will be infinite.

drop_range_partition(partition_relid TEXT, delete_data BOOLEAN DEFAULT TRUE)

Drop range partition and all of its data if delete_data is true.

attach_range_partition(parent_relid    REGCLASS,
                       partition_relid REGCLASS,
                       start_value     ANYELEMENT,
                       end_value       ANYELEMENT)

Attach partition to the existing range-partitioned relation. The attached table must have exactly the same structure as the parent table, including the dropped columns. Partition creation callback is invoked if set (see Section F.40.5.2.2).

detach_range_partition(partition_relid REGCLASS)

Detach partition from the existing range-partitioned relation.

disable_pathman_for(parent_relid REGCLASS)

Permanently disable pg_pathman partitioning mechanism for the specified parent table and remove the insert trigger if it exists. All partitions and data remain unchanged.

drop_partitions(parent_relid REGCLASS,
                delete_data  BOOLEAN DEFAULT FALSE)

Drop partitions of the parent table (both foreign and local relations). If delete_data is false, the data is copied to the parent table first. Default is false.

F.40.5.3.5. Additional Functions
pathman_version()

Returns the pg_pathman version number.

set_interval(relation REGCLASS, value ANYELEMENT)

Update range-partitioned table interval. Note that interval must not be negative and it must not be trivial, i.e. its value should be greater than zero for numeric types, at least 1 microsecond for timestamp and at least 1 day for date.

set_enable_parent(relation REGCLASS, value BOOLEAN)

Include/exclude parent table into/from query plan. In original Postgres Pro planner parent table is always included into query plan even if it's empty, which can lead to additional overhead. You can use disable_parent() if you are never going to use parent table as a storage. Default value depends on the partition_data parameter specified during initial partitioning with the create_range_partitions() function. If the partition_data parameter was true, then all data have already been migrated to partitions and the parent table is disabled. Otherwise, it is enabled.

set_auto(relation REGCLASS, value BOOLEAN)

Enable/disable auto partition propagation (only for range partitioning). It is enabled by default.

set_init_callback(relation REGCLASS, callback REGPROCEDURE DEFAULT 0)

Set partition creation callback to be invoked for each attached or created partition (both hash and range). If callback is marked with SECURITY INVOKER, it is executed with the privileges of the user who produced a statement that has led to creation of a new partition. For example:

INSERT INTO partitioned_table VALUES (-5)

The callback must have the following signature: part_init_callback(args JSONB) RETURNS VOID. Parameter arg consists of several fields whose presence depends on partitioning type:

/* Range-partitioned table abc (child abc_4) */
{
    "parent":    "abc",
    "parttype":  "2",
    "partition": "abc_4",
    "range_max": "401",
    "range_min": "301"
}

/* Hash-partitioned table abc (child abc_0) */
{
    "parent":    "abc",
    "parttype":  "1",
    "partition": "abc_0"
}
      
set_spawn_using_bgw(relation REGCLASS, value BOOLEAN)
      

When inserting new data beyond the partitioning range, use SpawnPartitionsWorker to create new partitions in a separate transaction.

create_naming_sequence(parent_relid REGCLASS)
      

Enable automatic partition naming for the specified relation table. You must run this function when partitioning this table by composite key.

add_to_pathman_config(parent_relid     REGCLASS,
                      expression       TEXT,
                      range_interval   TEXT)
add_to_pathman_config(parent_relid     REGCLASS,
                      expression       TEXT)
      

Register the specified relation table with pg_pathman to enable partitioning by the provided expression. For range partitioning, the range_interval argument is mandatory. You can set it to NULL if you are going to add partition manually.

generate_range_bounds(p_start     ANYELEMENT,
                      p_interval  INTERVAL,
                      p_count     INTEGER)

generate_range_bounds(p_start     ANYELEMENT,
                      p_interval  ANYELEMENT,
                      p_count     INTEGER)

Build the bounds array that defines the bounds for partitions to be created. You can pass this array as an argument to the create_range_partitions() function.

F.40.6. Authors

  • Ildar Musin

  • Alexander Korotkov

  • Dmitry Ivanov