Re: Query Performance and IOWait - Mailing list pgsql-performance

The data that we are accessing is via QLogic cards connected to an EMC Clarion.  We have tried it on local SCSI disks
withthe same (bad) results.
 

When the machine gets stuck in a 100% IOWAIT state it often crashes soon after that.

The disks are fine, have been replaced and checked.

Here are my results from hdparm -Tt /dev/sda1 (which is the EMC disk array)
/dev/sda1:
 Timing buffer-cache reads:   2976 MB in  2.00 seconds = 1488.00 MB/sec
 Timing buffered disk reads:   44 MB in  3.13 seconds =  14.06 MB/sec

-----Original Message-----
From: Dave Cramer [mailto:pg@fastcrypt.com]
Sent: Thursday, November 18, 2004 11:14 AM
To: Andrew Janian
Cc: pgsql-performance@postgresql.org
Subject: Re: [PERFORM] Query Performance and IOWait


Andrew,

Dell's aren't well known for their disk performance, apparently most of 
the perc controllers sold with dell's are actually adaptec controllers. 
Also apparently they do not come with the battery required to use the 
battery backed up write cache ( In fact according to some Dell won't 
even sell the battery to you). Also Dell's monitoring software is quite 
a memory hog.

Have you looked at top ?, and also hdparm -Tt /dev/sd?

Dave

Andrew Janian wrote:

>Hello All,
>
>I have a setup with a Dell Poweredge 2650 with Red Hat and Postgres 7.4.5 with a database with about 27GB of data.
Thetable in question has about 35 million rows.
 
>
>I am running the following query:
>
>SELECT *
>FROM mb_fix_message
>WHERE msg_client_order_id IN (
>    SELECT msg_client_order_id
>    FROM mb_fix_message
>    WHERE msg_log_time >= '2004-06-01'
>        AND msg_log_time < '2004-06-01 13:30:00.000'
>        AND msg_message_type IN ('D','G')
>        AND mb_ord_type = '1'
>    )
>    AND msg_log_time > '2004-06-01'
>    AND msg_log_time < '2004-06-01 23:59:59.999'
>    AND msg_message_type = '8'
>    AND (mb_raw_text LIKE '%39=1%' OR mb_raw_text LIKE '%39=2%');
>
>with the following plan:
>
>

                                QUERY PLAN
 
>Nested Loop IN Join  (cost=0.00..34047.29 rows=1 width=526)
>  ->  Index Scan using mfi_log_time on mb_fix_message  (cost=0.00..22231.31 rows=2539 width=526)
>       Index Cond: ((msg_log_time > '2004-06-01 00:00:00'::timestamp without time zone) AND (msg_log_time <
'2004-06-0123:59:59.999'::timestamp without time zone))
 
>       Filter: (((msg_message_type)::text = '8'::text) AND (((mb_raw_text)::text ~~ '%39=1%'::text) OR
((mb_raw_text)::text~~ '%39=2%'::text)))
 
>  ->  Index Scan using mfi_client_ordid on mb_fix_message  (cost=0.00..445.56 rows=1 width=18)
>       Index Cond: (("outer".msg_client_order_id)::text = (mb_fix_message.msg_client_order_id)::text)
>       Filter: ((msg_log_time >= '2004-06-01 00:00:00'::timestamp without time zone) AND (msg_log_time < '2004-06-01
13:30:00'::timestampwithout time zone) AND ((msg_message_type)::text = 'D'::text) OR ((msg_message_type)::text =
'G'::text))AND ((mb_ord_type)::text = '1'::text))
 
>
>While running, this query produces 100% iowait usage on its processor and takes a ungodly amount of time (about an
hour).
>
>The postgres settings are as follows:
>
>shared_buffers = 32768          # min 16, at least max_connections*2, 8KB each
>sort_mem = 262144               # min 64, size in KB
>
>And the /etc/sysctl.conf has:
>kernel.shmall = 274235392
>kernel.shmmax = 274235392
>
>The system has 4GB of RAM.
>
>I am pretty sure of these settings, but only from my reading of the docs and others' recommendations online.
>
>Thanks,
>
>Andrew Janian
>OMS Development
>Scottrade Financial Services
>(314) 965-1555 x 1513
>Cell: (314) 369-2083
>
>---------------------------(end of broadcast)---------------------------
>TIP 7: don't forget to increase your free space map settings
>  
>

-- 
Dave Cramer
http://www.postgresintl.com
519 939 0336
ICQ#14675561