Re: Re: [pgadmin-support] Issue with a hanging apply process on the replica db after vacuum works on primary - Mailing list pgsql-general

05.03.2015 11:25, Jim Nasby пишет:

On 2/27/15 5:11 AM, Sergey Shchukin wrote:

show max_standby_streaming_delay;
  max_standby_streaming_delay
-----------------------------
  30s

We both need to be more clear about which server we're talking about (master or replica).

What are max_standby_streaming_delay and max_standby_archive_delay set to *on the replica*?

My hope is that one or both of those is set to somewhere around 8 minutes on the replica. That would explain everything.

If that's not the case then I suspect what's happening is there's something running on the replica that isn't checking for interrupts frequently enough. That would also explain it.

When replication hangs, is the replication process using a lot of CPU? Or is it just sitting there? What's the process status for the replay process show?

Can you get a trace of the replay process on the replica when this is happening to see where it's spending all it's time?

How are you generating these log lines?
 Tue Feb 24 15:05:07 MSK 2015 Stream: MASTER-masterdb:79607161592048 SLAVE:79607161550576 Replay:79607160986064 :: REPLAY 592 KBytes (00:00:00.398376 seconds)

Do you see the confl_* fields in pg_stat_database_conflicts on the *replica* increasing?

Hi Jim,

max_standby_streaming_delay and max_standby_archive_delay  both are 30s on master and replica dbs

I don't see any specific or heavy workload during this issue with a hanging apply process. Just a normal queries as usual.

But I see an increased disk activity during the time when the apply issue is ongoing

DSK |          sdc  |              | busy     61%  | read   11511 |               | write   4534 | KiB/r     46  |              |  KiB/w      4 | MBr/s  52.78 |               | MBw/s   1.88 |  avq     1.45 |              |  avio 0.38 ms |
DSK |          sde  |              | busy     60%  | read   11457 |               | write   4398 | KiB/r     46  |              |  KiB/w      4 | MBr/s  51.97 |               | MBw/s   1.83 |  avq     1.47 |              |  avio 0.38 ms |
DSK |          sdd  |              | busy     60%  | read    9673 |               | write   4538 | KiB/r     61  |              |  KiB/w      4 | MBr/s  58.24 |               | MBw/s   1.88 |  avq     1.47 |              |  avio 0.42 ms |
DSK |          sdj  |              | busy     59%  | read    9576 |               | write   4177 | KiB/r     63  |              |  KiB/w      4 | MBr/s  59.30 |               | MBw/s   1.75 |  avq     1.48 |              |  avio 0.43 ms |
DSK |          sdh  |              | busy     59%  | read    9615 |               | write   4305 | KiB/r     63  |              |  KiB/w      4 | MBr/s  59.23 |               | MBw/s   1.80 |  avq     1.48 |              |  avio 0.42 ms |
DSK |          sdf  |              | busy     59%  | read    9483 |               | write   4404 | KiB/r     63  |              |  KiB/w      4 | MBr/s  59.11 |               | MBw/s   1.83 |  avq     1.47 |              |  avio 0.42 ms |
DSK |          sdi  |              | busy     59%  | read   11273 |               | write   4173 | KiB/r     46  |              |  KiB/w      4 | MBr/s  51.50 |               | MBw/s   1.75 |  avq     1.43 |              |  avio 0.38 ms |
DSK |          sdg  |              | busy     59%  | read   11406 |               | write   4297 | KiB/r     46  |              |  KiB/w      4 | MBr/s  51.66 |               | MBw/s   1.80 |  avq     1.46 |              |  avio 0.37 ms |

Although it's not seems to be an upper IO limit.

Normally disks are busy at 20-45%

DSK |          sde  |              | busy     29%  | read    6524 |               | write  14426 | KiB/r     26  |              |  KiB/w      5 | MBr/s  17.08 |               | MBw/s   7.78 |  avq    10.46 |              |  avio 0.14 ms |
DSK |          sdi  |              | busy     29%  | read    6590 |               | write  14391 | KiB/r     26  |              |  KiB/w      5 | MBr/s  17.19 |               | MBw/s   7.76 |  avq     8.75 |              |  avio 0.14 ms |
DSK |          sdg  |              | busy     29%  | read    6547 |               | write  14401 | KiB/r     26  |              |  KiB/w      5 | MBr/s  16.94 |               | MBw/s   7.60 |  avq     7.28 |              |  avio 0.14 ms |
DSK |          sdc  |              | busy     29%  | read    6835 |               | write  14283 | KiB/r     27  |              |  KiB/w      5 | MBr/s  18.08 |               | MBw/s   7.74 |  avq     8.77 |              |  avio 0.14 ms |
DSK |          sdf  |              | busy     23%  | read    3808 |               | write  14391 | KiB/r     36  |              |  KiB/w      5 | MBr/s  13.49 |               | MBw/s   7.78 |  avq    12.88 |              |  avio 0.13 ms |
DSK |          sdd  |              | busy     23%  | read    3747 |               | write  14229 | KiB/r     33  |              |  KiB/w      5 | MBr/s  12.32 |               | MBw/s   7.74 |  avq    10.07 |              |  avio 0.13 ms |
DSK |          sdj  |              | busy     23%  | read    3737 |               | write  14336 | KiB/r     36  |              |  KiB/w      5 | MBr/s  13.16 |               | MBw/s   7.76 |  avq    10.48 |              |  avio 0.13 ms |
DSK |          sdh  |              | busy     23%  | read    3793 |               | write  14362 | KiB/r     35  |              |  KiB/w      5 | MBr/s  13.29 |               | MBw/s   7.60 |  avq     8.61 |              |  avio 0.13 ms |


Also during the issue perf shows [k] copy_user_generic_string on the top positions
 14.09%     postmaster  postgres               [.] 0x00000000001b4569
 10.25%     postmaster  [kernel.kallsyms]      [k] copy_user_generic_string
  4.15%     postmaster  postgres               [.] hash_search_with_hash_value
  2.08%     postmaster  postgres               [.] SearchCatCache
  1.79%     postmaster  postgres               [.] LWLockAcquire
  1.18%     postmaster  libc-2.12.so           [.] memcpy
  1.12%     postmaster  postgres               [.] mdnblocks

Issue starts: at 19:43
Mon Mar 16 19:43:04 MSK 2015 Stream: MASTER-rdb04d:70837172337784 SLAVE:70837172314864 Replay:70837172316512 :: REPLAY 21 KBytes (00:00:00.006225 seconds)
Mon Mar 16 19:43:09 MSK 2015 Stream: MASTER-rdb04d:70837177455624 SLAVE:70837177390968 Replay:70837176794376 :: REPLAY 646 KBytes (00:00:00.367305 seconds)
Mon Mar 16 19:43:14 MSK 2015 Stream: MASTER-rdb04d:70837185005120 SLAVE:70837184961280 Replay:70837183253896 :: REPLAY 1710 KBytes (00:00:00.827881 seconds)
Mon Mar 16 19:43:19 MSK 2015 Stream: MASTER-rdb04d:70837190417984 SLAVE:70837190230232 Replay:70837183253896 :: REPLAY 6996 KBytes (00:00:05.873169 seconds)
Mon Mar 16 19:43:24 MSK 2015 Stream: MASTER-rdb04d:70837198538232 SLAVE:70837198485000 Replay:70837183253896 :: REPLAY 14926 KBytes (00:00:11.025561 seconds)
Mon Mar 16 19:43:29 MSK 2015 Stream: MASTER-rdb04d:70837209961192 SLAVE:70837209869384 Replay:70837183253896 :: REPLAY 26081 KBytes (00:00:16.068014 seconds)

We see [k] copy_user_generic_string

 12.90%     postmaster  [kernel.kallsyms]      [k] copy_user_generic_string
 11.49%     postmaster  postgres               [.] 0x00000000001f40c1
  4.74%     postmaster  postgres               [.] hash_search_with_hash_value
  1.86%     postmaster  postgres               [.] mdnblocks
  1.73%     postmaster  postgres               [.] LWLockAcquire
  1.67%     postmaster  postgres               [.] SearchCatCache


 25.71%     postmaster  [kernel.kallsyms]      [k] copy_user_generic_string
  7.89%     postmaster  postgres               [.] hash_search_with_hash_value
  4.66%     postmaster  postgres               [.] 0x00000000002108da
  4.51%     postmaster  postgres               [.] mdnblocks
  3.36%     postmaster  [kernel.kallsyms]      [k] put_page

Issue stops: at 19:51:39
Mon Mar 16 19:51:24 MSK 2015 Stream: MASTER-rdb04d:70838904179344 SLAVE:70838903934392 Replay:70837183253896 :: REPLAY 1680591 KBytes (00:08:10.384679 seconds)
Mon Mar 16 19:51:29 MSK 2015 Stream: MASTER-rdb04d:70838929994336 SLAVE:70838929873624 Replay:70837183253896 :: REPLAY 1705801 KBytes (00:08:15.428773 seconds)
Mon Mar 16 19:51:34 MSK 2015 Stream: MASTER-rdb04d:70838951993624 SLAVE:70838951899768 Replay:70837183253896 :: REPLAY 1727285 KBytes (00:08:20.472567 seconds)
Mon Mar 16 19:51:39 MSK 2015 Stream: MASTER-rdb04d:70838975297912 SLAVE:70838975180384 Replay:70837208050872 :: REPLAY 1725827 KBytes (00:08:10.256935 seconds)
Mon Mar 16 19:51:44 MSK 2015 Stream: MASTER-rdb04d:70839001502160 SLAVE:70839001412616 Replay:70837260116984 :: REPLAY 1700572 KBytes (00:07:49.849511 seconds)
Mon Mar 16 19:51:49 MSK 2015 Stream: MASTER-rdb04d:70839022866760 SLAVE:70839022751184 Replay:70837276732880 :: REPLAY 1705209 KBytes (00:07:42.307364 seconds)

And copy_user_generic_string goes down
+  13.43%       postmaster  postgres                 [.] 0x000000000023dc9a
+   3.71%       postmaster  [kernel.kallsyms]        [k] copy_user_generic_string
+   2.46%             init  [kernel.kallsyms]        [k] intel_idle
+   2.30%       postmaster  postgres                 [.] hash_search_with_hash_value
+   2.01%       postmaster  postgres                 [.] SearchCatCache


Could you clarify what types of traces did you mean? GDB?

To calculate slave and apply lag I use the following query at the replica site

slave_lag=$($psql -U monitor  -h$s_host -p$s_port -A -t -c "SELECT pg_xlog_location_diff(pg_last_xlog_receive_location(), '0/0') AS receive" $p_db)
replay_lag=$($psql -U monitor -h$s_host -p$s_port -A -t -c "SELECT pg_xlog_location_diff(pg_last_xlog_replay_location(), '0/0') AS replay" $p_db)
replay_timediff=$($psql -U monitor -h$s_host -p$s_port -A -t -c "SELECT NOW() - pg_last_xact_replay_timestamp() AS replication_delay" $p_db)
master_lag=$($psql -U monitor -h$p_host -p$p_port -A -t -c "SELECT pg_xlog_location_diff(pg_current_xlog_location(), '0/0') AS offset" $p_db)
echo "$(date) Stream: MASTER-$p_host:$master_lag SLAVE:$slave_lag Replay:$replay_lag :: REPLAY $(bc <<< $master_lag/1024-$replay_lag/1024) KBytes (${replay_timediff} seconds)"

- 
Best regards,
Sergey Shchukin 

We have upgraded one of our shards to 9.4.1 and expectedly that did not help.

A few things to notice which may be useful.

1. When replay stops, startup process reads a lot from array with $PGDATA. In iotop and iostat we see the following:

Total DISK READ: 490.42 M/s | Total DISK WRITE: 3.82 M/s TID  PRIO  USER    DISK READ>  DISK WRITE  SWAPIN      IO    COMMAND  3316 be/4 postgres  492.34 M/s    0.00 B/s  0.00 % 39.91 % postgres: startup process  <...>
  Device:         rrqm/s   wrqm/s     r/s     w/s    rMB/s    wMB/s avgrq-sz avgqu-sz   await  svctm  %util  <...>  md2               0.00     0.00 6501.00    7.00   339.90     0.03   106.97     0.00    0.00   0.00   0.00  md3               0.00     0.00    0.00 1739.00     0.00     6.79     8.00     0.00    0.00   0.00   0.00
  root@rpopdb04g ~ # fgrep 9.4 /proc/mounts  /dev/md2 /var/lib/pgsql/9.4/data ext4 rw,noatime,nodiratime,barrier=1,stripe=64,data=ordered 0 0  /dev/md3 /var/lib/pgsql/9.4/data/pg_xlog ext4 rw,noatime,nodiratime,barrier=0,stripe=64,data=ordered 0 0  root@rpopdb04g ~ #

2. The state of the startup process is changing in such a way:
  root@rpopdb04g ~ # while true; do ps aux | grep '[s]tartup'; sleep 1; done  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:11 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Ts   18:04   8:11 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:12 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Ds   18:04   8:12 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:13 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:13 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:14 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Ts   18:04   8:14 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Ds   18:04   8:15 postgres: startup process  postgres  3316 26.6  3.2 4732052 4299260 ?     Rs   18:04   8:15 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Ds   18:04   8:15 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Ds   18:04   8:16 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Rs   18:04   8:16 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Rs   18:04   8:17 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Ts   18:04   8:17 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Rs   18:04   8:18 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Rs   18:04   8:18 postgres: startup process  postgres  3316 26.7  3.2 4732052 4299260 ?     Ds   18:04   8:19 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Rs   18:04   8:19 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Rs   18:04   8:20 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Rs   18:04   8:20 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Ds   18:04   8:21 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Ds   18:04   8:22 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Rs   18:04   8:22 postgres: startup process  postgres  3316 26.8  3.2 4732052 4299260 ?     Rs   18:04   8:23 postgres: startup process  postgres  3316 26.9  3.2 4732052 4299260 ?     Rs   18:04   8:23 postgres: startup process  postgres  3316 26.9  3.2 4732052 4299260 ?     Rs   18:04   8:24 postgres: startup process  postgres  3316 26.9  3.2 4732052 4299260 ?     Ts   18:04   8:24 postgres: startup process  postgres  3316 26.9  3.2 4732052 4299260 ?     Rs   18:04   8:25 postgres: startup process  ^C  root@rpopdb04g ~ #

3. confl* fields in pg_stat_database_conflicts are always zero during the pausing of replay.

4. The stack-traces taken with GDB are not really informative. We will recompile PostgreSQL with —enable-debug option and run it on one of our replicas if needed. Since it is a production system we would like to do it last of all. But we will do it if anybody would not give us any ideas.

5. In one of the experiments replay stopped on 4115/56126DC0 xlog position. Here is a bit of pg_xlogdump output:
   rpopdb04d/rpopdb M # select pg_xlogfile_name('4115/56126DC0');    pg_xlogfile_name    --------------------------     000000060000411500000056     (1 row)
     Time: 0.496 ms     rpopdb04d/rpopdb M #
   root@pg-backup04h /u0/rpopdb04/wals/0000000600004115 # /usr/pgsql-9.4/bin/pg_xlogdump 000000060000411500000056 000000060000411500000056 | fgrep 4115/56126DC0 -C10   rmgr: Heap        len (rec/tot):     36/  3948, tx: 3930143874, lsn: 4115/561226C8, prev 4115/56122698, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 196267/4 xmax 3930143874 ; new tid 196267/10 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143874, lsn: 4115/56123638, prev 4115/561226C8, bkp: 0000, desc: commit: 2015-03-19 18:26:27.725158 MSK   rmgr: Heap        len (rec/tot):     58/    90, tx: 3930143875, lsn: 4115/56123668, prev 4115/56123638, bkp: 0000, desc: hot_update: rel 1663/16420/16737; tid 23624/3 xmax 3930143875 ; new tid 23624/21 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143875, lsn: 4115/561236C8, prev 4115/56123668, bkp: 0000, desc: commit: 2015-03-19 18:26:27.726432 MSK   rmgr: Heap        len (rec/tot):     36/  2196, tx: 3930143876, lsn: 4115/561236F8, prev 4115/561236C8, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 123008/4 xmax 3930143876 ; new tid 123008/5 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143876, lsn: 4115/56123F90, prev 4115/561236F8, bkp: 0000, desc: commit: 2015-03-19 18:26:27.727088 MSK   rmgr: Heap        len (rec/tot):     36/  7108, tx: 3930143877, lsn: 4115/56123FC0, prev 4115/56123F90, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 34815/6 xmax 3930143877 ; new tid 34815/16 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143877, lsn: 4115/56125BA0, prev 4115/56123FC0, bkp: 0000, desc: commit: 2015-03-19 18:26:27.728178 MSK   rmgr: Heap        len (rec/tot):     36/  4520, tx: 3930143878, lsn: 4115/56125BD0, prev 4115/56125BA0, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 147863/5 xmax 3930143878 ; new tid 147863/16 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143878, lsn: 4115/56126D90, prev 4115/56125BD0, bkp: 0000, desc: commit: 2015-03-19 18:26:27.728339 MSK   rmgr: Btree       len (rec/tot):     20/    52, tx:          0, lsn: 4115/56126DC0, prev 4115/56126D90, bkp: 0000, desc: vacuum: rel 1663/16420/16796; blk 31222118, lastBlockVacuumed 0   rmgr: Heap        len (rec/tot):     36/  6112, tx: 3930143879, lsn: 4115/56126DF8, prev 4115/56126DC0, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 23461/26 xmax 3930143879 ; new tid 23461/22 xmax 0   rmgr: Heap2       len (rec/tot):     24/  8160, tx:          0, lsn: 4115/561285F0, prev 4115/56126DF8, bkp: 1000, desc: clean: rel 1663/16420/16782; blk 21997709 remxid 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143879, lsn: 4115/5612A5E8, prev 4115/561285F0, bkp: 0000, desc: commit: 2015-03-19 18:26:27.728805 MSK   rmgr: Heap2       len (rec/tot):     20/  8268, tx:          0, lsn: 4115/5612A618, prev 4115/5612A5E8, bkp: 1000, desc: visible: rel 1663/16420/16782; blk 21997709   rmgr: Heap        len (rec/tot):     36/  7420, tx: 3930143880, lsn: 4115/5612C680, prev 4115/5612A618, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 37456/8 xmax 3930143880 ; new tid 37456/29 xmax 0   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143880, lsn: 4115/5612E398, prev 4115/5612C680, bkp: 0000, desc: commit: 2015-03-19 18:26:27.729141 MSK   rmgr: Heap        len (rec/tot):     36/  7272, tx: 3930143881, lsn: 4115/5612E3C8, prev 4115/5612E398, bkp: 1000, desc: hot_update: rel 1663/16420/16737; tid 23614/2 xmax 3930143881 ; new tid 23614/22 xmax 0   rmgr: Heap        len (rec/tot):    150/   182, tx:          0, lsn: 4115/56130048, prev 4115/5612E3C8, bkp: 0000, desc: inplace: rel 1663/16420/12764; tid 11/31   rmgr: Transaction len (rec/tot):     12/    44, tx: 3930143881, lsn: 4115/56130100, prev 4115/56130048, bkp: 0000, desc: commit: 2015-03-19 18:26:27.729340 MSK   rmgr: Heap        len (rec/tot):     43/    75, tx: 3930143882, lsn: 4115/56130130, prev 4115/56130100, bkp: 0000, desc: insert: rel 1663/16420/16773; tid 10159950/26   rmgr: Btree       len (rec/tot):     42/    74, tx: 3930143882, lsn: 4115/56130180, prev 4115/56130130, bkp: 0000, desc: insert: rel 1663/16420/16800; tid 12758988/260   root@pg-backup04h /u0/rpopdb04/wals/0000000600004115 #

Any help would be really appropriate. Thanks in advance.