We're about to try out a new BBU controller card, and would welcome
any advice from anyone with experience with this hardware.
It is an IBM ServeRAID-MR10M SAS/SATA Controller with the optional
BBU. The docs say it is "a LSI1078ROC-based PCI Express RAID
adapter." We're hooking it up to four drawers of 12 drives each; all
drives are 146 GB 3.5 inch 15 kRPM HS SAS. Our hope is to set up
three drawers in RAID 10. I don't know if this will work -- our
previous adapter refused to allow more than 14 drives in RAID 10, so
we had to use RAID 5 for the "big" partition. The other drawer will
be RAID 5.
Tips?
-Kevin
