Variable (degrading) performance - Mailing list pgsql-performance
| From | Vladimir Stankovic |
|---|---|
| Subject | Variable (degrading) performance |
| Date | |
| Msg-id | 466D848F.2010505@city.ac.uk Whole thread Raw |
| Responses |
Re: Variable (degrading) performance
|
| List | pgsql-performance |
Hi all,
It seems that I have an issue with the performance of a PostgreSQL server.
I'm running write-intensive, TPC-C like tests. The workload consist of
150 to 200 thousand transactions. The performance varies dramatically,
between 5 and more than 9 hours (I don't have the exact figure for the
longest experiment). Initially the server is relatively fast. It
finishes the first batch of 50k transactions in an hour. This is
probably due to the fact that the database is RAM-resident during this
interval. As soon as the database grows bigger than the RAM the
performance, not surprisingly, degrades, because of the slow disks.
My problem is that the performance is rather variable, and to me
non-deterministic. A 150k test can finish in approx. 3h30mins but
conversely it can take more than 5h to complete.
Preferably I would like to see *steady-state* performance (where my
interpretation of the steady-state is that the average
throughput/response time does not change over time). Is the steady-state
achievable despite the MVCC and the inherent non-determinism between
experiments? What could be the reasons for the variable performance?
- misconfiguration of the PG parameters (e.g. autovacuum does not cope
with the dead tuples on the MVCC architecture)
- file fragmentation
- index bloat
- ???
The initial size of the database (actually the output of the 'du -h'
command) is ~ 400 MB. The size increases dramatically, somewhere between
600MB and 1.1GB
I have doubted the client application at some point too. However, other
server combinations using different DBMS exhibit steady state
performance.As a matter of fact when PG is paired with Firebird, through
statement-based replication middleware, the performance of the pair is
steady too.
The hardware configuration:
Client machine
- 1.5 GHz CPU Pentium 4
- 1GB Rambus RAM
- Seagate st340810a IDE disk (40GB), 5400 rpms
Server machine
- 1.5 GHz CPU Pentium 4
- 640 MB Rambus RAM
- Seagate Barracuda 7200.9 rpms
- Seagate st340810a IDE disk (40GB) - the WAL is stored on an ext2
partition
The Software configuration:
The client application is a multi-threaded Java client running on Win
2000 Pro sp4
The database server version is 8.1.5 running on Fedora Core 6.
Please find attached:
1 - the output of vmstat taken after the first 60k transactions were
executed
2 - the postgresql.conf file
Any help would be appreciated.
Best regards,
Vladimir
P.S. Apologies for possible multiple posts
--
Vladimir Stankovic T: +44 20 7040 0273
Research Student/Research Assistant F: +44 20 7040 8585
Centre for Software Reliability E: V.Stankovic@city.ac.uk
City University
Northampton Square, London EC1V 0HB
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# (The '=' is optional.) White space may be used. Comments are introduced
# with '#' anywhere on a line. The complete list of option names and
# allowed values can be found in the PostgreSQL documentation. The
# commented-out settings shown in this file represent the default values.
#
# Please note that re-commenting a setting is NOT sufficient to revert it
# to the default value, unless you restart the postmaster.
#
# Any option can also be given as a command line switch to the
# postmaster, e.g. 'postmaster -c log_connections=on'. Some options
# can be changed at run-time with the 'SET' SQL command.
#
# This file is read on postmaster startup and when the postmaster
# receives a SIGHUP. If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect, or use
# "pg_ctl reload". Some settings, such as listen_addresses, require
# a postmaster shutdown and restart to take effect.
#---------------------------------------------------------------------------
# FILE LOCATIONS
#---------------------------------------------------------------------------
# The default values of these variables are driven from the -D command line
# switch or PGDATA environment variable, represented here as ConfigDir.
#data_directory = 'ConfigDir' # use data in another directory
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
#ident_file = 'ConfigDir/pg_ident.conf' # IDENT configuration file
# If external_pid_file is not explicitly set, no extra pid file is written.
#external_pid_file = '(none)' # write an extra pid file
#---------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#---------------------------------------------------------------------------
# - Connection Settings -
#listen_addresses = 'localhost' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost', '*' = all
#port = 5432
#max_connections = 100
max_connections = 150
# note: increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction). You
# might also need to raise shared_buffers to support more connections.
#superuser_reserved_connections = 2
superuser_reserved_connections = 3 # 1 for the AUTOVACUUM proc
#unix_socket_directory = ''
#unix_socket_group = ''
#unix_socket_permissions = 0777 # octal
#bonjour_name = '' # defaults to the computer name
# - Security & Authentication -
#authentication_timeout = 60 # 1-600, in seconds
#ssl = off
#password_encryption = on
#db_user_namespace = off
# Kerberos
#krb_server_keyfile = ''
#krb_srvname = 'postgres'
#krb_server_hostname = '' # empty string matches any keytab entry
#krb_caseins_users = off
# - TCP Keepalives -
# see 'man 7 tcp' for details
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
# 0 selects the system default
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
# 0 selects the system default
#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------
# - Memory -
#shared_buffers = 1000 # min 16 or max_connections*2, 8KB each
shared_buffers = 16384
#temp_buffers = 1000 # min 100, 8KB each
#max_prepared_transactions = 5 # can be 0 or more
# note: increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
#work_mem = 1024 # min 64, size in KB
#maintenance_work_mem = 16384 # min 1024, size in KB
maintenance_work_mem = 16384
#max_stack_depth = 2048 # min 100, size in KB
# - Free Space Map -
#max_fsm_pages = 20000 # min max_fsm_relations*16, 6 bytes each
max_fsm_pages = 60000
#max_fsm_relations = 1000 # min 100, ~70 bytes each
# - Kernel Resource Usage -
#max_files_per_process = 1000 # min 25
#preload_libraries = ''
# - Cost-Based Vacuum Delay -
#vacuum_cost_delay = 0 # 0-1000 milliseconds
#vacuum_cost_page_hit = 1 # 0-10000 credits
#vacuum_cost_page_miss = 10 # 0-10000 credits
#vacuum_cost_page_dirty = 20 # 0-10000 credits
#vacuum_cost_limit = 200 # 0-10000 credits
# - Background writer -
#bgwriter_delay = 200 # 10-10000 milliseconds between rounds
#bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
#bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
#bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round
#bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round
#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------
# - Settings -
fsync = off # turns forced synchronization on or off
#wal_sync_method = fsync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync
# fsync
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page writes
#wal_buffers = 8 # min 4, 8KB each
wal_buffers = 32
#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000
# - Checkpoints -
#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
checkpoint_segments = 9
#checkpoint_timeout = 300 # range 30-3600, in seconds
#checkpoint_warning = 30 # in seconds, 0 is off
# - Archiving -
#archive_command = '' # command to use to archive a logfile
# segment
#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------
# - Planner Method Configuration -
#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on
# - Planner Cost Constants -
#effective_cache_size = 1000 # typically 8KB each
effective_cache_size = 16384
#random_page_cost = 4 # units are one sequential page fetch
# cost
#cpu_tuple_cost = 0.01 # (same)
#cpu_index_tuple_cost = 0.001 # (same)
#cpu_operator_cost = 0.0025 # (same)
# - Genetic Query Optimizer -
#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on effort
#geqo_generations = 0 # selects default based on effort
#geqo_selection_bias = 2.0 # range 1.5-2.0
# - Other Planner Options -
#default_statistics_target = 10 # range 1-1000
#constraint_exclusion = off
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOINs
#---------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#---------------------------------------------------------------------------
# - Where to Log -
#log_destination = 'stderr' # Valid values are combinations of
# stderr, syslog and eventlog,
# depending on platform.
# This is used when logging to stderr:
redirect_stderr = on # Enable capturing of stderr into log
# files
# These are only used if redirect_stderr is on:
log_directory = 'pg_log' # Directory where log files are written
# Can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
# Can include strftime() escapes
log_truncate_on_rotation = on # If on, any existing log file of the same
# name as the new log file will be
# truncated rather than appended to. But
# such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
log_rotation_age = 1440 # Automatic rotation of logfiles will
# happen after so many minutes. 0 to
# disable.
log_rotation_size = 0 # Automatic rotation of logfiles will
# happen after so many kilobytes of log
# output. 0 to disable.
# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
# - When to Log -
#client_min_messages = notice # Values, in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# log
# notice
# warning
# error
#log_min_messages = notice # Values, in order of decreasing detail:
log_min_messages = notice
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic
#log_error_verbosity = default # terse, default, or verbose messages
#log_min_error_statement = panic # Values in order of increasing severity:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# panic(off)
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
# and their durations, in milliseconds.
#silent_mode = off # DO NOT USE without syslog or
# redirect_stderr
# - What to Log -
#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_line_prefix = '' # Special values:
# %u = user name
# %d = database name
# %r = remote host and port
# %h = remote host
# %p = PID
# %t = timestamp (no milliseconds)
# %m = timestamp with milliseconds
# %i = command tag
# %c = session id
# %l = session line number
# %s = session start timestamp
# %x = transaction id
# %q = stop here in non-session
# processes
# %% = '%'
# e.g. '<%u%%%d> '
#log_statement = 'none' # none, mod, ddl, all
#log_hostname = off
#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------
# - Statistics Monitoring -
#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off
# - Query/Index Statistics Collector -
#stats_start_collector = on
stats_start_collector = on
#stats_command_string = off
stats_command_string = off #turn it on ON for debugging
#stats_block_level = off
stats_row_level = on
#stats_row_level = off
#stats_reset_on_server_start = off
#---------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#---------------------------------------------------------------------------
autovacuum = on # enable autovacuum subprocess?
#autovacuum_naptime = 60 # time between autovacuum runs, in secs
#autovacuum_vacuum_threshold = 1000 # min # of tuple updates before
# vacuum
#autovacuum_analyze_threshold = 500 # min # of tuple updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.4 # fraction of rel size before
# vacuum
autovacuum_vacuum_scale_factor = 0 # intensify autovacuum vacuums?
#autovacuum_analyze_scale_factor = 0.2 # fraction of rel size before
# analyze
autovacuum_analyze_scale_factor = 0 # intensify autovacuum analyzes?
#autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
# autovac, -1 means use
# vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
# autovac, -1 means use
# vacuum_cost_limit
#---------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#---------------------------------------------------------------------------
# - Statement Behavior -
#search_path = '$user,public' # schema names
#default_tablespace = '' # a tablespace name, '' uses
# the default
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#statement_timeout = 0 # 0 is disabled, in milliseconds
# - Locale and Formatting -
#datestyle = 'iso, mdy'
#timezone = unknown # actually, defaults to TZ
# environment setting
#australian_timezones = off
#extra_float_digits = 0 # min -15, max 2
#client_encoding = sql_ascii # actually, defaults to database
# encoding
# These settings are initialized by initdb -- they might be changed
lc_messages = 'C' # locale for system error message
# strings
lc_monetary = 'C' # locale for monetary formatting
lc_numeric = 'C' # locale for number formatting
lc_time = 'C' # locale for time formatting
# - Other Defaults -
#explain_pretty_print = on
#dynamic_library_path = '$libdir'
#---------------------------------------------------------------------------
# LOCK MANAGEMENT
#---------------------------------------------------------------------------
#deadlock_timeout = 1000 # in milliseconds
#max_locks_per_transaction = 64 # min 10
# note: each lock table slot uses ~220 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.
#---------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#---------------------------------------------------------------------------
# - Previous Postgres Versions -
#add_missing_from = off
#backslash_quote = safe_encoding # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = off
#regex_flavor = advanced # advanced, extended, or basic
#sql_inheritance = on
# - Other Platforms & Clients -
#transform_null_equals = off
#---------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#---------------------------------------------------------------------------
#custom_variable_classes = '' # list of custom variable class names
-bash-3.1$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 11 156 6976 4640 525572 0 0 288 1712 981 620 26 11 30 33 0
0 3 156 7356 4648 525172 0 0 274 2245 1287 992 36 17 0 48 0
0 4 156 6680 4664 525780 0 0 174 2665 1193 743 34 14 0 52 0
0 3 156 7336 4640 524944 0 0 232 2185 694 348 7 4 0 89 0
2 4 156 6536 4652 525920 0 0 346 2073 1677 999 50 19 0 32 0
2 4 156 6892 4652 525620 0 0 535 1546 1210 903 36 14 0 50 0
0 6 156 7416 4644 524924 0 0 141 2834 1196 755 39 10 0 51 0
1 6 156 6676 4652 525788 0 0 306 1832 1374 965 44 17 0 40 0
0 7 156 7328 4640 525072 0 0 148 2418 1077 747 31 11 0 58 0
1 8 156 6656 4644 525808 0 0 385 2256 1144 824 34 10 0 56 0
2 11 156 7368 4644 525160 0 0 354 1957 1380 1060 43 13 0 45 0
1 8 156 6880 4648 525608 0 0 217 1865 997 695 33 11 0 56 0
0 6 156 7340 4628 525028 0 0 109 2397 1096 780 30 14 0 56 0
2 9 156 7032 4640 525484 0 0 173 2277 994 622 25 11 0 65 0
4 6 156 7560 4628 525028 0 0 401 1701 1085 747 35 12 0 53 0
3 8 156 6948 4632 525544 0 0 257 2070 1066 676 24 11 0 65 0
0 5 156 6640 4636 525904 0 0 57 2720 999 581 20 8 0 72 0
1 11 156 7052 4640 525416 0 0 226 1682 1246 778 36 11 0 53 0
0 6 156 6684 4644 525776 0 0 105 1689 946 621 23 11 0 66 0
5 9 156 6684 4644 525920 0 0 40 1808 686 335 10 5 0 85 0
0 6 156 6960 4644 525476 0 0 210 2354 1446 950 37 19 0 44 0
2 8 156 6652 4648 525828 0 0 105 2345 1115 776 29 9 0 62 0
2 9 156 7056 4648 525464 0 0 274 1853 1453 1046 44 15 0 41 0
1 9 156 7216 4636 525124 0 0 218 2261 1414 1031 42 17 0 41 0
1 3 156 6784 4644 525740 0 0 217 1944 1161 813 31 14 0 55 0
2 5 156 7300 4628 525212 0 0 233 2650 1231 823 37 15 0 48 0
1 5 156 6532 4636 525856 0 0 218 2337 1314 876 36 17 0 47 0
1 5 156 7224 4632 525300 0 0 217 2465 1060 688 24 13 0 63 0
2 7 156 7448 4632 524936 0 0 298 2273 1196 779 37 13 0 50 0
0 6 156 6952 4636 525512 0 0 169 2521 1184 847 31 16 0 53 0
2 11 156 7628 4636 524776 0 0 210 1872 1332 961 43 17 0 41 0
0 7 156 6772 4644 525756 0 0 437 2462 1425 1001 45 14 0 40 0
0 5 156 6968 4636 525496 0 0 266 2201 1364 914 42 16 0 42 0
0 4 156 7676 4624 524616 0 0 161 2817 1202 761 31 12 0 57 0
0 9 156 7436 4628 524944 0 0 137 2549 890 457 15 9 0 76 0
1 7 156 6764 4632 525668 0 0 365 2449 1352 920 39 13 0 48 0
0 6 156 7000 4628 525388 0 0 331 1977 1645 1186 52 16 0 32 0
0 8 156 7384 4620 525092 0 0 346 2185 1566 1038 44 19 0 37 0
0 11 156 6768 4624 525676 0 0 209 2509 1313 893 38 16 0 46 0
0 7 156 7044 4624 525440 0 0 267 1905 1408 988 37 18 0 45 0
1 8 156 6576 4628 525904 0 0 137 1177 952 763 31 8 0 61 0
7 6 156 7384 4608 525108 0 0 161 2317 1352 881 41 18 0 42 0
0 3 156 7668 4612 524660 0 0 274 2753 1502 1022 53 17 0 30 0
2 8 156 7296 4616 525176 0 0 217 2593 1220 761 35 15 0 50 0
3 7 156 7516 4608 524716 0 0 242 2353 1569 1012 40 23 0 38 0
3 3 156 7152 4612 525388 0 0 185 2409 1222 801 34 10 0 56 0
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
2 7 156 7588 4604 524884 0 0 298 2161 1402 938 40 20 0 41 0
4 9 156 6864 4612 525640 0 0 274 2045 1322 943 44 12 0 45 0
2 8 156 7156 4604 525320 0 0 373 2189 1314 933 39 14 0 47 0
3 8 156 6548 4608 525940 0 0 385 1925 1074 779 29 15 0 56 0
3 7 156 6616 4588 525732 0 0 273 2138 1318 1005 40 18 0 43 0
0 14 156 7192 4564 524816 0 0 303 7220 1414 1130 40 33 0 27 0
1 9 156 6804 4564 525204 0 0 201 3297 989 853 27 8 0 65 0
0 8 156 6680 4568 525408 0 0 9 2508 656 321 3 4 0 93 0
0 8 156 7272 4560 524740 0 0 109 3266 1039 791 30 11 0 59 0
0 8 156 6564 4572 525568 0 0 222 3681 1227 876 31 9 0 60 0
pgsql-performance by date: