Re: postgres kerberos how to - Mailing list pgsql-general

If anyone else out there can help me understand what this ktpass program is doing I would be greatful.  Also, can anyone help answer these questions I have.  Thanks.

Questions:
- If I have 10 users in postgresql do I need to run this ktpass program for each user?  If so would I always keep the princ paramater listed as "postgres/FAUXACACIA@FAUX.COM" and do the capitals matter in this command?
- With this ktpass command, what is the +rndPass option?  I'm used to seeing something like -pass P@ssWoRd
- After this keytab file is created, I copy it to /etc/krb5.keytab on the linux box, and I edit my krb5.conf file to resemble yours listed.  Is there anything else that has to be done on the Windows or linux side?
- When using postgres kerberos support, do you have to have a local unix user account?


Derrick Stensrud wrote:

Thanks, I'm going to go ahead and try to implement postgresql kerberos against active directory 2003 today.  I read a bit about it last night and have a few questions. 

You wrote: "

* Map PG on database server as a user in Active Directory         o Create user account in AD for PG service 
         ie. 'postgres_fauxacacia' 
         o Make keytab file with AD PG user account. This will also map the user to the service. 

ktpass princ postgres/FAUXACACIA@FAUX.COM -mapuser postgres_fauxacacia +rndPass -out postgres_fauxacacia.keytab -target fauxsol -ptype KRB5_NT_PRINCIPAL
" 

Questions:
- If I have 10 users in postgresql do I need to run this ktpass program for each user?  If so would I always keep the princ paramater listed as "postgres/FAUXACACIA@FAUX.COM" and do the capitals matter in this command?
- With this ktpass command, what is the +rndPass option?  I'm used to seeing something like -pass P@ssWoRd
- After this keytab file is created, I copy it to /etc/krb5.keytab on the linux box, and I edit my krb5.conf file to resemble yours listed.  Is there anything else that has to be done on the Windows or linux side?

Thanks for the help so far.




Matt Burry wrote:

From: pgsql-general-owner@postgresql.org 
[mailto:pgsql-general-owner@postgresql.org] On Behalf Of Derrick
Sent: Tuesday, December 19, 2006 5:52 PM
To: pgsql-general@postgresql.org
Subject: [GENERAL] postgres kerberos how to

I was wondering if anyone out there could point me in the 
right direction.  I'm looking for a decent how to on using 
postgresql's built in kerberos support to authenticate 
against windows 2003 active directory.  I was trying to use 
pam_ldap, but had to give up and decide on using kerberos 
instead.  Any help what so ever is much appreciated.  
Thanks.
   

Derrick,

We've been setting it up in our shop and it's been a bit of a bear. We're connecting to PG through the ODBC driver using both PG 8.1 and 8.2. Below are the steps we've taken to get it to work with a Windows 2003 Domain Controller and Windows 2003 Server running Terminal Services which serves the front end. We have had greater success with Windows 2003 Server R2, though we have been able to get it to work with Windows 2000 Server and Windows 2003 server. We also needed to use MIT's Net ID manager.

It would great if others could point to ways that we could simplify these steps. I wasn't the one here who implemented things, so one of my colleagues may need to followup if there are specific questions. Additionally, we have not looked into the suggestion that Magnus made that 8.2's LDAP support could help solve this problem of AD integration from a slightly different direction.

-Matt


Kerberos Configuration Steps
**************************

PG Server=fauxacacia
Active Directory Domain=faux.com
Active Directory Domain Controller=fauxsol
Windows 2003 Server R2 (Terminal Services server, in our case, used to serve our front end)=fauxsaturn

On Domain Controller: fauxsol(Windows 2003)
   * Add entries to Domain Controller/DNS for all relevant servers so that all principals can contact each other by name.

192.168.4.26    fauxsol fauxsol.faux.com
192.168.4.28    fauxacacia fauxacacia.faux.com
192.168.4.29    fauxsaturn fauxsaturn.faux.com


On PG Server: fauxacacia(Linux)

Samba
   * Install Samba to facilitate copying of keytab file from Windows Domain Controller 

NTP (Network Time Protocol to make sure that servers stay with same time, required with Kerberos)
   * Install package, ntpdate   * Edit '/etc/default/ntpdate' to point to the Windows Domain Controller/KDC Server 

# servers to check.   (Separate multiple servers with spaces.)
#NTPSERVERS="pool.ntp.org"
#NTPSERVERS="ntp.ubuntu.com"
NTPSERVERS="fauxsol"
#
# additional options for ntpdate
#NTPOPTIONS="-v"
NTPOPTIONS="-u"
   * Add an hourly cron entry, '/etc/cron.hourly/ntpdate', and make it executable, 'chmod ugo+x /etc/cron.hourly/ntpdate' 

#!/bin/sh

NTPDATE=/usr/sbin/ntpdate
NTPDEFAULTS=/etc/default/ntpdate
NTPFALLBACK="ntp.ubuntu.com"

if [ -f "$NTPDEFAULTS" ]; then       . $NTPDEFAULTS       test -n "$NTPSERVERS" || NTPSERVERS=$NTPFALLBACK
else       NTPSERVERS=$NTPFALLBACK
fi

if [ -x "$NTPDATE" ]; then       $NTPDATE -s $NTPOPTIONS $NTPSERVERS
fi
   * Restart cron, '/etc/init.d/cron restart' 

MIT Kerberos Library
   * Install Kerberos Libraries
         krb5-config, krb5-user 
   * Edit Kerberos config files ('/etc/krb5.conf') 

[libdefaults]       default_realm = [faux.com]       krb4_config = /etc/krb.conf       krb4_realms = /etc/krb.realms       kdc_timesync = 1       ccache_type = 4       forwardable = true       proxiable = true

[realms]       FAUX.COM = {               kdc = [fauxsol]               admin_server = [fauxsol]       }

DNS
   * Edit DNS settings file ('/etc/resolv.conf') 

nameserver [ip address of DNS server 1]
nameserver [ip address of DNS server 2]

On Domain Controller: fauxsol (Windows 2003)
   * Install Windows Supporting Tools (ktpass), found on Windows installation CD as SUPPORT\TOOLS\SUPTOOLS.MSI   * Map PG on database server as a user in Active Directory         o Create user account in AD for PG service 
         ie. 'postgres_fauxacacia' 
         o Make keytab file with AD PG user account. This will also map the user to the service. 

ktpass princ postgres/FAUXACACIA@FAUX.COM -mapuser postgres_fauxacacia +rndPass -out postgres_fauxacacia.keytab -target fauxsol -ptype KRB5_NT_PRINCIPAL

[edit]
On PG Server: fauxacacia (Linux)
   * Move keytab file to PG Server (Linux).
         '/usr/local/pgsql/etc/krb5.keytab' and '/etc/krb5.keytab' 
   * Secure keytab files         o 'chown postgres:postgres /usr/local/pgsql/etc/krb5.keytab'         o 'chmod ugo-wx /usr/local/pgsql/etc/krb5.keytab' - Files created by samba have executable bit set for user.         o 'chmod go-r /usr/local/pgsql/etc/krb5.keytab'    * Configure PG to use '/usr/local/pgsql/etc/krb5.keytab' 

# Kerberos
krb_server_keyfile = '/usr/local/pgsql/etc/krb5.keytab'                 # (change requires restart)
#krb_srvname = 'postgres'               # (change requires restart)
#krb_server_hostname = ''               # empty string matches any keytab entry                                       # (change requires restart)
#krb_caseins_users = off                # (change requires restart)
   * Restart PG 

[edit]
On Front End Server: fauxsaturn (Windows 2003)
   * Install MIT Kerberos For Windows         o Make sure that Net ID Manager is configured to start when user logs in(default).    * Create 'C:\Program Files\MIT\Kerberos\bin\krb5.ini': 

[libdefaults]default_realm =	FAUX.COMkdc_timesync = 1ccache_type = 4ticket_lifetime = 36000

[realms]FAUX.COM = {	kdc = FAUXSOL	admin_server = FAUXSOL}

[appdefaults]autologin = trueforward = trueforwardable = trueencrypt = true
   * Delete all krb5_32.dll's other than the one in the MIT\Kerberos\bin folder.
         ie. 'C:\Program Files\psqlODBC\0802\bin' or 'C:\Program Files\pgAdmin III\1.6' 
         o This ensures that all client side PG Kerberos authentication will occur via the just installed MIT Kerberos for Windows package.         o The secondary, desired effect is that only the one MIT\Kerberos\bin\krb5.ini file is used.         o NOTE: This is just for our Terminal Services environment: If the krb5.ini file is placed in 'C:\Windows', then Kerberos authentication will fail unless the session is in install mode('change user /install'). This is because of the virtualized copy of the C:\Windows directory that is created in a Terminal Services Session. In particular, INI files are managed by a sync process between the virtual/personal Windows directory and the real one. Entering install mode points the user's session to the _real_ Windows directory.               + As long as there is the one 'C:\Program Files\MIT\Kerberos\bin\krb5_32.dll' and the one 'C:\Program Files\MIT\Kerberos\bin\krb5.ini', there 'change user /install' should not be necesssary.