Re: WAL Performance Improvements - Mailing list pgsql-patches
| From | Janardhana Reddy |
|---|---|
| Subject | Re: WAL Performance Improvements |
| Date | |
| Msg-id | 3C7B3359.508B3A5E@mediaring.com.sg Whole thread Raw |
| In response to | WAL Performance Improvements (Janardhana Reddy <jana-reddy@mediaring.com.sg>) |
| Responses |
Re: WAL Performance Improvements
(Helge Bahmann <bahmann@math.tu-freiberg.de>)
|
| List | pgsql-patches |
Tom Lane wrote:
> Janardhana Reddy <jana-reddy@mediaring.com.sg> writes:
> > I've attached a patch which should improve the performance of WAL by
> > reducing the fsync time
> > and write time by 50%(if OS page size is 4k) , if the transaction
> > generate the WAL data less then 4k. Instead of
> > writing every time 8k data in to the WAL file it will write only the
> > portion of the data which
> > as changed from the last time(Example : if transaction generates 150
> > bytes of WAL data ,then it writes
> > only 150 bytes instead of 8k).
>
> As near as I can tell, this breaks WAL by failing to ensure that the
> rest of the current page is zeroed. After crash and recovery, you might
> read obsolete WAL records (written during the previous cycle of life
> of the WAL segment file) and think they are valid.
>
> I'd also be interested to see the measurements backing up the claim of 50%
> performance improvement. That'd depend very largely on the filesystem block
> size, no?
>
> regards, tom lane
Hi,
I have done some changes to patch to overcome the "WAL failing to ensure
that the
rest of the current page is zeroed". for every write to the WAL empty
record(32 bytes with zero value ) is appended so that
at the time of REDO it can see the record with zero length in all cases.
Test Results with Latest patch :
environment: Intel PC ,IDE (harddisk),Linux Kernel 2.4.0 (OS
Version). Single
connection is connected to the database and pumping
continously insert statements. each insert
generates 160 bytes to WAL Log.
With out applying the Patch :
Transaction Per Second : 332 TPS
Time Taken by fdatasync : 2160
usec/call
Time taken by write : 61
usec/call
After applying the patch :
Transaction Per Second : 435 TPS
Time Taken by fdatasync : 512
usec/sec
Time Taken by write : 42 usec/sec
I've attached latest patch and xlog.c .
Regards
jana
--- src/backend/access/transam/xlog.c.orig Mon Feb 25 11:04:39 2002
+++ src/backend/access/transam/xlog.c Tue Feb 26 14:33:58 2002
@@ -991,16 +991,17 @@
XLogWrite(XLogwrtRqst WriteRqst)
{
XLogCtlWrite *Write = &XLogCtl->Write;
- char *from;
+ char *from;
bool ispartialpage;
bool use_existent;
-
+ uint32 data_size,total_size,first_time,current_xrecoff;
/*
* Update local LogwrtResult (caller probably did this already,
* but...)
*/
LogwrtResult = Write->LogwrtResult;
-
+ first_time=1;
+ current_xrecoff=LogwrtResult.Write.xrecoff;
while (XLByteLT(LogwrtResult.Write, WriteRqst.Write))
{
/*
@@ -1080,19 +1081,56 @@
openLogOff = 0;
}
- /* Need to seek in the file? */
- if (openLogOff != (LogwrtResult.Write.xrecoff - BLCKSZ) % XLogSegSize)
+ /* Need to seek in the file? */
+ if (openLogOff != (current_xrecoff ) % XLogSegSize)
{
- openLogOff = (LogwrtResult.Write.xrecoff - BLCKSZ) % XLogSegSize;
+ openLogOff = (current_xrecoff ) % XLogSegSize;
if (lseek(openLogFile, (off_t) openLogOff, SEEK_SET) < 0)
elog(STOP, "lseek of log file %u, segment %u, offset %u failed: %m",
openLogId, openLogSeg, openLogOff);
- }
+ }
/* OK to write the page */
from = XLogCtl->pages + Write->curridx * BLCKSZ;
+ data_size=BLCKSZ ;
+ total_size=BLCKSZ ;
+ { /* compute the data size to write in to the file */
+ int offset;
+ int type=0; /* used only for display debug info */
+ offset= current_xrecoff % BLCKSZ ;
+ from = XLogCtl->pages + Write->curridx * BLCKSZ +offset ;
+ if (!ispartialpage && first_time==0)
+ {
+ data_size=BLCKSZ ;
+ total_size=BLCKSZ ;
+ type=1;
+ }else
+ {
+ if(ispartialpage)
+ {
+ type=2;
+ data_size=WriteRqst.Write.xrecoff-current_xrecoff;
+ if ( (offset+data_size+sizeof(XLogRecord)) <= BLCKSZ)
+ {
+ total_size=data_size+sizeof(XLogRecord); type=5;
+ }else
+ {
+ total_size=BLCKSZ-offset;
+ }
+ }else
+ {
+ data_size=BLCKSZ-(current_xrecoff-((current_xrecoff/BLCKSZ)*BLCKSZ));
+ total_size=data_size;
+ type=3;
+ }
+ }
+ current_xrecoff=current_xrecoff+data_size;
+ if (XLOG_DEBUG)
+ elog(DEBUG,"XLogWrite type:%d from:%x(%d) data size:%d totalsize:%d Fileoffset:%d
\n",type,from,from,data_size,total_size,openLogOff);
+ first_time=0;
+ }
errno = 0;
- if (write(openLogFile, from, BLCKSZ) != BLCKSZ)
+ if (write(openLogFile, from, total_size) != total_size)
{
/* if write didn't set errno, assume problem is no disk space */
if (errno == 0)
@@ -1100,7 +1138,7 @@
elog(STOP, "write of log file %u, segment %u, offset %u failed: %m",
openLogId, openLogSeg, openLogOff);
}
- openLogOff += BLCKSZ;
+ openLogOff += total_size;
/*
* If we just wrote the whole last page of a logfile segment,
/*-------------------------------------------------------------------------
*
* xlog.c
* PostgreSQL transaction log manager
*
*
* Portions Copyright (c) 1996-2001, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $Header: /cvsroot/pgsql/src/backend/access/transam/xlog.c,v 1.86 2002/01/14 17:55:57 tgl Exp $
*
*-------------------------------------------------------------------------
*/
#include "postgres.h"
#include <fcntl.h>
#include <signal.h>
#include <unistd.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
#include <dirent.h>
#ifdef USE_LOCALE
#include <locale.h>
#endif
#include "access/clog.h"
#include "access/transam.h"
#include "access/xact.h"
#include "access/xlog.h"
#include "access/xlogutils.h"
#include "catalog/catversion.h"
#include "catalog/pg_control.h"
#include "storage/bufpage.h"
#include "storage/lwlock.h"
#include "storage/pmsignal.h"
#include "storage/proc.h"
#include "storage/sinval.h"
#include "storage/spin.h"
#include "utils/builtins.h"
#include "utils/relcache.h"
#include "utils/selfuncs.h"
#include "miscadmin.h"
/*
* This chunk of hackery attempts to determine which file sync methods
* are available on the current platform, and to choose an appropriate
* default method. We assume that fsync() is always available, and that
* configure determined whether fdatasync() is.
*/
#define SYNC_METHOD_FSYNC 0
#define SYNC_METHOD_FDATASYNC 1
#define SYNC_METHOD_OPEN 2 /* used for both O_SYNC and
* O_DSYNC */
#if defined(O_SYNC)
#define OPEN_SYNC_FLAG O_SYNC
#else
#if defined(O_FSYNC)
#define OPEN_SYNC_FLAG O_FSYNC
#endif
#endif
#if defined(OPEN_SYNC_FLAG)
#if defined(O_DSYNC) && (O_DSYNC != OPEN_SYNC_FLAG)
#define OPEN_DATASYNC_FLAG O_DSYNC
#endif
#endif
#if defined(OPEN_DATASYNC_FLAG)
#define DEFAULT_SYNC_METHOD_STR "open_datasync"
#define DEFAULT_SYNC_METHOD SYNC_METHOD_OPEN
#define DEFAULT_SYNC_FLAGBIT OPEN_DATASYNC_FLAG
#else
#if defined(HAVE_FDATASYNC)
#define DEFAULT_SYNC_METHOD_STR "fdatasync"
#define DEFAULT_SYNC_METHOD SYNC_METHOD_FDATASYNC
#define DEFAULT_SYNC_FLAGBIT 0
#else
#define DEFAULT_SYNC_METHOD_STR "fsync"
#define DEFAULT_SYNC_METHOD SYNC_METHOD_FSYNC
#define DEFAULT_SYNC_FLAGBIT 0
#endif
#endif
/* User-settable parameters */
int CheckPointSegments = 3;
int XLOGbuffers = 8;
int XLOGfiles = 0; /* # of files to preallocate during ckpt */
int XLOG_DEBUG = 0;
char *XLOG_sync_method = NULL;
const char XLOG_sync_method_default[] = DEFAULT_SYNC_METHOD_STR;
char XLOG_archive_dir[MAXPGPATH]; /* null string means
* delete 'em */
/*
* XLOGfileslop is used in the code as the allowed "fuzz" in the number of
* preallocated XLOG segments --- we try to have at least XLOGfiles advance
* segments but no more than XLOGfiles+XLOGfileslop segments. This could
* be made a separate GUC variable, but at present I think it's sufficient
* to hardwire it as 2*CheckPointSegments+1. Under normal conditions, a
* checkpoint will free no more than 2*CheckPointSegments log segments, and
* we want to recycle all of them; the +1 allows boundary cases to happen
* without wasting a delete/create-segment cycle.
*/
#define XLOGfileslop (2*CheckPointSegments + 1)
/* these are derived from XLOG_sync_method by assign_xlog_sync_method */
static int sync_method = DEFAULT_SYNC_METHOD;
static int open_sync_bit = DEFAULT_SYNC_FLAGBIT;
#define XLOG_SYNC_BIT (enableFsync ? open_sync_bit : 0)
#define MinXLOGbuffers 4
/*
* ThisStartUpID will be same in all backends --- it identifies current
* instance of the database system.
*/
StartUpID ThisStartUpID = 0;
/* Are we doing recovery by reading XLOG? */
bool InRecovery = false;
/*
* MyLastRecPtr points to the start of the last XLOG record inserted by the
* current transaction. If MyLastRecPtr.xrecoff == 0, then we are not in
* a transaction or the transaction has not yet made any loggable changes.
*
* Note that XLOG records inserted outside transaction control are not
* reflected into MyLastRecPtr.
*/
XLogRecPtr MyLastRecPtr = {0, 0};
/*
* ProcLastRecPtr points to the start of the last XLOG record inserted by the
* current backend. It is updated for all inserts, transaction-controlled
* or not.
*/
static XLogRecPtr ProcLastRecPtr = {0, 0};
/*
* RedoRecPtr is this backend's local copy of the REDO record pointer
* (which is almost but not quite the same as a pointer to the most recent
* CHECKPOINT record). We update this from the shared-memory copy,
* XLogCtl->Insert.RedoRecPtr, whenever we can safely do so (ie, when we
* hold the Insert lock). See XLogInsert for details.
*/
static XLogRecPtr RedoRecPtr;
/*----------
* Shared-memory data structures for XLOG control
*
* LogwrtRqst indicates a byte position that we need to write and/or fsync
* the log up to (all records before that point must be written or fsynced).
* LogwrtResult indicates the byte positions we have already written/fsynced.
* These structs are identical but are declared separately to indicate their
* slightly different functions.
*
* We do a lot of pushups to minimize the amount of access to lockable
* shared memory values. There are actually three shared-memory copies of
* LogwrtResult, plus one unshared copy in each backend. Here's how it works:
* XLogCtl->LogwrtResult is protected by info_lck
* XLogCtl->Write.LogwrtResult is protected by WALWriteLock
* XLogCtl->Insert.LogwrtResult is protected by WALInsertLock
* One must hold the associated lock to read or write any of these, but
* of course no lock is needed to read/write the unshared LogwrtResult.
*
* XLogCtl->LogwrtResult and XLogCtl->Write.LogwrtResult are both "always
* right", since both are updated by a write or flush operation before
* it releases WALWriteLock. The point of keeping XLogCtl->Write.LogwrtResult
* is that it can be examined/modified by code that already holds WALWriteLock
* without needing to grab info_lck as well.
*
* XLogCtl->Insert.LogwrtResult may lag behind the reality of the other two,
* but is updated when convenient. Again, it exists for the convenience of
* code that is already holding WALInsertLock but not the other locks.
*
* The unshared LogwrtResult may lag behind any or all of these, and again
* is updated when convenient.
*
* The request bookkeeping is simpler: there is a shared XLogCtl->LogwrtRqst
* (protected by info_lck), but we don't need to cache any copies of it.
*
* Note that this all works because the request and result positions can only
* advance forward, never back up, and so we can easily determine which of two
* values is "more up to date".
*
* info_lck is only held long enough to read/update the protected variables,
* so it's a plain spinlock. The other locks are held longer (potentially
* over I/O operations), so we use LWLocks for them. These locks are:
*
* WALInsertLock: must be held to insert a record into the WAL buffers.
*
* WALWriteLock: must be held to write WAL buffers to disk (XLogWrite or
* XLogFlush).
*
* ControlFileLock: must be held to read/update control file or create
* new log file.
*
* CheckpointLock: must be held to do a checkpoint (ensures only one
* checkpointer at a time; even though the postmaster won't launch
* parallel checkpoint processes, we need this because manual checkpoints
* could be launched simultaneously).
*
*----------
*/
typedef struct XLogwrtRqst
{
XLogRecPtr Write; /* last byte + 1 to write out */
XLogRecPtr Flush; /* last byte + 1 to flush */
} XLogwrtRqst;
typedef struct XLogwrtResult
{
XLogRecPtr Write; /* last byte + 1 written out */
XLogRecPtr Flush; /* last byte + 1 flushed */
} XLogwrtResult;
/*
* Shared state data for XLogInsert.
*/
typedef struct XLogCtlInsert
{
XLogwrtResult LogwrtResult; /* a recent value of LogwrtResult */
XLogRecPtr PrevRecord; /* start of previously-inserted record */
uint16 curridx; /* current block index in cache */
XLogPageHeader currpage; /* points to header of block in cache */
char *currpos; /* current insertion point in cache */
XLogRecPtr RedoRecPtr; /* current redo point for insertions */
} XLogCtlInsert;
/*
* Shared state data for XLogWrite/XLogFlush.
*/
typedef struct XLogCtlWrite
{
XLogwrtResult LogwrtResult; /* current value of LogwrtResult */
uint16 curridx; /* cache index of next block to write */
} XLogCtlWrite;
/*
* Total shared-memory state for XLOG.
*/
typedef struct XLogCtlData
{
/* Protected by WALInsertLock: */
XLogCtlInsert Insert;
/* Protected by info_lck: */
XLogwrtRqst LogwrtRqst;
XLogwrtResult LogwrtResult;
/* Protected by WALWriteLock: */
XLogCtlWrite Write;
/*
* These values do not change after startup, although the pointed-to
* pages and xlblocks values certainly do. Permission to read/write
* the pages and xlblocks values depends on WALInsertLock and
* WALWriteLock.
*/
char *pages; /* buffers for unwritten XLOG pages */
XLogRecPtr *xlblocks; /* 1st byte ptr-s + BLCKSZ */
uint32 XLogCacheByte; /* # bytes in xlog buffers */
uint32 XLogCacheBlck; /* highest allocated xlog buffer index */
StartUpID ThisStartUpID;
/* This value is not protected by *any* lock... */
XLogRecPtr RedoRecPtr; /* see SetRedoRecPtr/GetRedoRecPtr */
slock_t info_lck; /* locks shared LogwrtRqst/LogwrtResult */
} XLogCtlData;
static XLogCtlData *XLogCtl = NULL;
/*
* We maintain an image of pg_control in shared memory.
*/
static ControlFileData *ControlFile = NULL;
/*
* Macros for managing XLogInsert state. In most cases, the calling routine
* has local copies of XLogCtl->Insert and/or XLogCtl->Insert->curridx,
* so these are passed as parameters instead of being fetched via XLogCtl.
*/
/* Free space remaining in the current xlog page buffer */
#define INSERT_FREESPACE(Insert) \
(BLCKSZ - ((Insert)->currpos - (char *) (Insert)->currpage))
/* Construct XLogRecPtr value for current insertion point */
#define INSERT_RECPTR(recptr,Insert,curridx) \
( \
(recptr).xlogid = XLogCtl->xlblocks[curridx].xlogid, \
(recptr).xrecoff = \
XLogCtl->xlblocks[curridx].xrecoff - INSERT_FREESPACE(Insert) \
)
/* Increment an xlogid/segment pair */
#define NextLogSeg(logId, logSeg) \
do { \
if ((logSeg) >= XLogSegsPerFile-1) \
{ \
(logId)++; \
(logSeg) = 0; \
} \
else \
(logSeg)++; \
} while (0)
/* Decrement an xlogid/segment pair (assume it's not 0,0) */
#define PrevLogSeg(logId, logSeg) \
do { \
if (logSeg) \
(logSeg)--; \
else \
{ \
(logId)--; \
(logSeg) = XLogSegsPerFile-1; \
} \
} while (0)
/*
* Compute ID and segment from an XLogRecPtr.
*
* For XLByteToSeg, do the computation at face value. For XLByteToPrevSeg,
* a boundary byte is taken to be in the previous segment. This is suitable
* for deciding which segment to write given a pointer to a record end,
* for example.
*/
#define XLByteToSeg(xlrp, logId, logSeg) \
( logId = (xlrp).xlogid, \
logSeg = (xlrp).xrecoff / XLogSegSize \
)
#define XLByteToPrevSeg(xlrp, logId, logSeg) \
( logId = (xlrp).xlogid, \
logSeg = ((xlrp).xrecoff - 1) / XLogSegSize \
)
/*
* Is an XLogRecPtr within a particular XLOG segment?
*
* For XLByteInSeg, do the computation at face value. For XLByteInPrevSeg,
* a boundary byte is taken to be in the previous segment.
*/
#define XLByteInSeg(xlrp, logId, logSeg) \
((xlrp).xlogid == (logId) && \
(xlrp).xrecoff / XLogSegSize == (logSeg))
#define XLByteInPrevSeg(xlrp, logId, logSeg) \
((xlrp).xlogid == (logId) && \
((xlrp).xrecoff - 1) / XLogSegSize == (logSeg))
#define XLogFileName(path, log, seg) \
snprintf(path, MAXPGPATH, "%s/%08X%08X", \
XLogDir, log, seg)
#define PrevBufIdx(idx) \
(((idx) == 0) ? XLogCtl->XLogCacheBlck : ((idx) - 1))
#define NextBufIdx(idx) \
(((idx) == XLogCtl->XLogCacheBlck) ? 0 : ((idx) + 1))
#define XRecOffIsValid(xrecoff) \
((xrecoff) % BLCKSZ >= SizeOfXLogPHD && \
(BLCKSZ - (xrecoff) % BLCKSZ) >= SizeOfXLogRecord)
/*
* _INTL_MAXLOGRECSZ: max space needed for a record including header and
* any backup-block data.
*/
#define _INTL_MAXLOGRECSZ (SizeOfXLogRecord + MAXLOGRECSZ + \
XLR_MAX_BKP_BLOCKS * (sizeof(BkpBlock) + BLCKSZ))
/* File path names */
static char XLogDir[MAXPGPATH];
static char ControlFilePath[MAXPGPATH];
/*
* Private, possibly out-of-date copy of shared LogwrtResult.
* See discussion above.
*/
static XLogwrtResult LogwrtResult = {{0, 0}, {0, 0}};
/*
* openLogFile is -1 or a kernel FD for an open log file segment.
* When it's open, openLogOff is the current seek offset in the file.
* openLogId/openLogSeg identify the segment. These variables are only
* used to write the XLOG, and so will normally refer to the active segment.
*/
static int openLogFile = -1;
static uint32 openLogId = 0;
static uint32 openLogSeg = 0;
static uint32 openLogOff = 0;
/*
* These variables are used similarly to the ones above, but for reading
* the XLOG. Note, however, that readOff generally represents the offset
* of the page just read, not the seek position of the FD itself, which
* will be just past that page.
*/
static int readFile = -1;
static uint32 readId = 0;
static uint32 readSeg = 0;
static uint32 readOff = 0;
/* Buffer for currently read page (BLCKSZ bytes) */
static char *readBuf = NULL;
/* State information for XLOG reading */
static XLogRecPtr ReadRecPtr;
static XLogRecPtr EndRecPtr;
static XLogRecord *nextRecord = NULL;
static StartUpID lastReadSUI;
static bool InRedo = false;
static bool AdvanceXLInsertBuffer(void);
static void XLogWrite(XLogwrtRqst WriteRqst);
static int XLogFileInit(uint32 log, uint32 seg,
bool *use_existent, bool use_lock);
static bool InstallXLogFileSegment(uint32 log, uint32 seg, char *tmppath,
bool find_free, int max_advance,
bool use_lock);
static int XLogFileOpen(uint32 log, uint32 seg, bool econt);
static void PreallocXlogFiles(XLogRecPtr endptr);
static void MoveOfflineLogs(uint32 log, uint32 seg, XLogRecPtr endptr);
static XLogRecord *ReadRecord(XLogRecPtr *RecPtr, int emode, char *buffer);
static bool ValidXLOGHeader(XLogPageHeader hdr, int emode, bool checkSUI);
static XLogRecord *ReadCheckpointRecord(XLogRecPtr RecPtr,
int whichChkpt,
char *buffer);
static void WriteControlFile(void);
static void ReadControlFile(void);
static char *str_time(time_t tnow);
static void xlog_outrec(char *buf, XLogRecord *record);
static void issue_xlog_fsync(void);
/*
* Insert an XLOG record having the specified RMID and info bytes,
* with the body of the record being the data chunk(s) described by
* the rdata list (see xlog.h for notes about rdata).
*
* Returns XLOG pointer to end of record (beginning of next record).
* This can be used as LSN for data pages affected by the logged action.
* (LSN is the XLOG point up to which the XLOG must be flushed to disk
* before the data page can be written out. This implements the basic
* WAL rule "write the log before the data".)
*
* NB: this routine feels free to scribble on the XLogRecData structs,
* though not on the data they reference. This is OK since the XLogRecData
* structs are always just temporaries in the calling code.
*/
XLogRecPtr
XLogInsert(RmgrId rmid, uint8 info, XLogRecData *rdata)
{
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogRecord *record;
XLogContRecord *contrecord;
XLogRecPtr RecPtr;
XLogRecPtr WriteRqst;
uint32 freespace;
uint16 curridx;
XLogRecData *rdt;
Buffer dtbuf[XLR_MAX_BKP_BLOCKS];
bool dtbuf_bkp[XLR_MAX_BKP_BLOCKS];
BkpBlock dtbuf_xlg[XLR_MAX_BKP_BLOCKS];
XLogRecPtr dtbuf_lsn[XLR_MAX_BKP_BLOCKS];
XLogRecData dtbuf_rdt[2 * XLR_MAX_BKP_BLOCKS];
crc64 rdata_crc;
uint32 len,
write_len;
unsigned i;
XLogwrtRqst LogwrtRqst;
bool updrqst;
bool no_tran = (rmid == RM_XLOG_ID) ? true : false;
if (info & XLR_INFO_MASK)
{
if ((info & XLR_INFO_MASK) != XLOG_NO_TRAN)
elog(STOP, "XLogInsert: invalid info mask %02X",
(info & XLR_INFO_MASK));
no_tran = true;
info &= ~XLR_INFO_MASK;
}
/*
* In bootstrap mode, we don't actually log anything but XLOG
* resources; return a phony record pointer.
*/
if (IsBootstrapProcessingMode() && rmid != RM_XLOG_ID)
{
RecPtr.xlogid = 0;
RecPtr.xrecoff = SizeOfXLogPHD; /* start of 1st checkpoint record */
return (RecPtr);
}
/*
* Here we scan the rdata list, determine which buffers must be backed
* up, and compute the CRC values for the data. Note that the record
* header isn't added into the CRC yet since we don't know the final
* length or info bits quite yet.
*
* We may have to loop back to here if a race condition is detected
* below. We could prevent the race by doing all this work while
* holding the insert lock, but it seems better to avoid doing CRC
* calculations while holding the lock. This means we have to be
* careful about modifying the rdata list until we know we aren't
* going to loop back again. The only change we allow ourselves to
* make earlier is to set rdt->data = NULL in list items we have
* decided we will have to back up the whole buffer for. This is OK
* because we will certainly decide the same thing again for those
* items if we do it over; doing it here saves an extra pass over the
* list later.
*/
begin:;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
dtbuf[i] = InvalidBuffer;
dtbuf_bkp[i] = false;
}
INIT_CRC64(rdata_crc);
len = 0;
for (rdt = rdata;;)
{
if (rdt->buffer == InvalidBuffer)
{
/* Simple data, just include it */
len += rdt->len;
COMP_CRC64(rdata_crc, rdt->data, rdt->len);
}
else
{
/* Find info for buffer */
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (rdt->buffer == dtbuf[i])
{
/* Buffer already referenced by earlier list item */
if (dtbuf_bkp[i])
rdt->data = NULL;
else if (rdt->data)
{
len += rdt->len;
COMP_CRC64(rdata_crc, rdt->data, rdt->len);
}
break;
}
if (dtbuf[i] == InvalidBuffer)
{
/* OK, put it in this slot */
dtbuf[i] = rdt->buffer;
/*
* XXX We assume page LSN is first data on page
*/
dtbuf_lsn[i] = *((XLogRecPtr *) BufferGetBlock(rdt->buffer));
if (XLByteLE(dtbuf_lsn[i], RedoRecPtr))
{
crc64 dtcrc;
dtbuf_bkp[i] = true;
rdt->data = NULL;
INIT_CRC64(dtcrc);
COMP_CRC64(dtcrc,
BufferGetBlock(dtbuf[i]),
BLCKSZ);
dtbuf_xlg[i].node = BufferGetFileNode(dtbuf[i]);
dtbuf_xlg[i].block = BufferGetBlockNumber(dtbuf[i]);
COMP_CRC64(dtcrc,
(char *) &(dtbuf_xlg[i]) + sizeof(crc64),
sizeof(BkpBlock) - sizeof(crc64));
FIN_CRC64(dtcrc);
dtbuf_xlg[i].crc = dtcrc;
}
else if (rdt->data)
{
len += rdt->len;
COMP_CRC64(rdata_crc, rdt->data, rdt->len);
}
break;
}
}
if (i >= XLR_MAX_BKP_BLOCKS)
elog(STOP, "XLogInsert: can backup %d blocks at most",
XLR_MAX_BKP_BLOCKS);
}
/* Break out of loop when rdt points to last list item */
if (rdt->next == NULL)
break;
rdt = rdt->next;
}
/*
* NOTE: the test for len == 0 here is somewhat fishy, since in theory
* all of the rmgr data might have been suppressed in favor of backup
* blocks. Currently, all callers of XLogInsert provide at least some
* not-in-a-buffer data and so len == 0 should never happen, but that
* may not be true forever. If you need to remove the len == 0 check,
* also remove the check for xl_len == 0 in ReadRecord, below.
*/
if (len == 0 || len > MAXLOGRECSZ)
elog(STOP, "XLogInsert: invalid record length %u", len);
START_CRIT_SECTION();
/* update LogwrtResult before doing cache fill check */
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire_NoHoldoff(&xlogctl->info_lck);
LogwrtRqst = xlogctl->LogwrtRqst;
LogwrtResult = xlogctl->LogwrtResult;
SpinLockRelease_NoHoldoff(&xlogctl->info_lck);
}
/*
* If cache is half filled then try to acquire write lock and do
* XLogWrite. Ignore any fractional blocks in performing this check.
*/
LogwrtRqst.Write.xrecoff -= LogwrtRqst.Write.xrecoff % BLCKSZ;
if (LogwrtRqst.Write.xlogid != LogwrtResult.Write.xlogid ||
(LogwrtRqst.Write.xrecoff >= LogwrtResult.Write.xrecoff +
XLogCtl->XLogCacheByte / 2))
{
if (LWLockConditionalAcquire(WALWriteLock, LW_EXCLUSIVE))
{
LogwrtResult = XLogCtl->Write.LogwrtResult;
if (XLByteLT(LogwrtResult.Write, LogwrtRqst.Write))
XLogWrite(LogwrtRqst);
LWLockRelease(WALWriteLock);
}
}
/* Now wait to get insert lock */
LWLockAcquire(WALInsertLock, LW_EXCLUSIVE);
/*
* Check to see if my RedoRecPtr is out of date. If so, may have to
* go back and recompute everything. This can only happen just after
* a checkpoint, so it's better to be slow in this case and fast
* otherwise.
*/
if (!XLByteEQ(RedoRecPtr, Insert->RedoRecPtr))
{
Assert(XLByteLT(RedoRecPtr, Insert->RedoRecPtr));
RedoRecPtr = Insert->RedoRecPtr;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (dtbuf[i] == InvalidBuffer)
continue;
if (dtbuf_bkp[i] == false &&
XLByteLE(dtbuf_lsn[i], RedoRecPtr))
{
/*
* Oops, this buffer now needs to be backed up, but we
* didn't think so above. Start over.
*/
LWLockRelease(WALInsertLock);
END_CRIT_SECTION();
goto begin;
}
}
}
/*
* Make additional rdata list entries for the backup blocks, so that
* we don't need to special-case them in the write loop. Note that we
* have now irrevocably changed the input rdata list. At the exit of
* this loop, write_len includes the backup block data.
*
* Also set the appropriate info bits to show which buffers were backed
* up. The i'th XLR_SET_BKP_BLOCK bit corresponds to the i'th
* distinct buffer value (ignoring InvalidBuffer) appearing in the
* rdata list.
*/
write_len = len;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (dtbuf[i] == InvalidBuffer || !(dtbuf_bkp[i]))
continue;
info |= XLR_SET_BKP_BLOCK(i);
rdt->next = &(dtbuf_rdt[2 * i]);
dtbuf_rdt[2 * i].data = (char *) &(dtbuf_xlg[i]);
dtbuf_rdt[2 * i].len = sizeof(BkpBlock);
write_len += sizeof(BkpBlock);
rdt = dtbuf_rdt[2 * i].next = &(dtbuf_rdt[2 * i + 1]);
dtbuf_rdt[2 * i + 1].data = (char *) BufferGetBlock(dtbuf[i]);
dtbuf_rdt[2 * i + 1].len = BLCKSZ;
write_len += BLCKSZ;
dtbuf_rdt[2 * i + 1].next = NULL;
}
/* Insert record header */
updrqst = false;
freespace = INSERT_FREESPACE(Insert);
if (freespace < SizeOfXLogRecord)
{
updrqst = AdvanceXLInsertBuffer();
freespace = BLCKSZ - SizeOfXLogPHD;
}
curridx = Insert->curridx;
record = (XLogRecord *) Insert->currpos;
record->xl_prev = Insert->PrevRecord;
if (no_tran)
{
record->xl_xact_prev.xlogid = 0;
record->xl_xact_prev.xrecoff = 0;
}
else
record->xl_xact_prev = MyLastRecPtr;
record->xl_xid = GetCurrentTransactionId();
record->xl_len = len; /* doesn't include backup blocks */
record->xl_info = info;
record->xl_rmid = rmid;
/* Now we can finish computing the main CRC */
COMP_CRC64(rdata_crc, (char *) record + sizeof(crc64),
SizeOfXLogRecord - sizeof(crc64));
FIN_CRC64(rdata_crc);
record->xl_crc = rdata_crc;
/* Compute record's XLOG location */
INSERT_RECPTR(RecPtr, Insert, curridx);
/* If first XLOG record of transaction, save it in PROC array */
if (MyLastRecPtr.xrecoff == 0 && !no_tran)
{
/*
* We do not acquire SInvalLock here because of possible deadlock.
* Anyone who wants to inspect other procs' logRec must acquire
* WALInsertLock, instead. A better solution would be a per-PROC
* spinlock, but no time for that before 7.2 --- tgl 12/19/01.
*/
MyProc->logRec = RecPtr;
}
if (XLOG_DEBUG)
{
char buf[8192];
sprintf(buf, "INSERT @ %X/%X: ", RecPtr.xlogid, RecPtr.xrecoff);
xlog_outrec(buf, record);
if (rdata->data != NULL)
{
strcat(buf, " - ");
RmgrTable[record->xl_rmid].rm_desc(buf, record->xl_info, rdata->data);
}
elog(DEBUG, "%s", buf);
}
/* Record begin of record in appropriate places */
if (!no_tran)
MyLastRecPtr = RecPtr;
ProcLastRecPtr = RecPtr;
Insert->PrevRecord = RecPtr;
Insert->currpos += SizeOfXLogRecord;
freespace -= SizeOfXLogRecord;
/*
* Append the data, including backup blocks if any
*/
while (write_len)
{
while (rdata->data == NULL)
rdata = rdata->next;
if (freespace > 0)
{
if (rdata->len > freespace)
{
memcpy(Insert->currpos, rdata->data, freespace);
rdata->data += freespace;
rdata->len -= freespace;
write_len -= freespace;
}
else
{
memcpy(Insert->currpos, rdata->data, rdata->len);
freespace -= rdata->len;
write_len -= rdata->len;
Insert->currpos += rdata->len;
rdata = rdata->next;
continue;
}
}
/* Use next buffer */
updrqst = AdvanceXLInsertBuffer();
curridx = Insert->curridx;
/* Insert cont-record header */
Insert->currpage->xlp_info |= XLP_FIRST_IS_CONTRECORD;
contrecord = (XLogContRecord *) Insert->currpos;
contrecord->xl_rem_len = write_len;
Insert->currpos += SizeOfXLogContRecord;
freespace = BLCKSZ - SizeOfXLogPHD - SizeOfXLogContRecord;
}
/* Ensure next record will be properly aligned */
Insert->currpos = (char *) Insert->currpage +
MAXALIGN(Insert->currpos - (char *) Insert->currpage);
freespace = INSERT_FREESPACE(Insert);
/*
* The recptr I return is the beginning of the *next* record. This
* will be stored as LSN for changed data pages...
*/
INSERT_RECPTR(RecPtr, Insert, curridx);
/* Need to update shared LogwrtRqst if some block was filled up */
if (freespace < SizeOfXLogRecord)
updrqst = true; /* curridx is filled and available for
* writing out */
else
curridx = PrevBufIdx(curridx);
WriteRqst = XLogCtl->xlblocks[curridx];
LWLockRelease(WALInsertLock);
if (updrqst)
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire_NoHoldoff(&xlogctl->info_lck);
/* advance global request to include new block(s) */
if (XLByteLT(xlogctl->LogwrtRqst.Write, WriteRqst))
xlogctl->LogwrtRqst.Write = WriteRqst;
/* update local result copy while I have the chance */
LogwrtResult = xlogctl->LogwrtResult;
SpinLockRelease_NoHoldoff(&xlogctl->info_lck);
}
END_CRIT_SECTION();
return (RecPtr);
}
/*
* Advance the Insert state to the next buffer page, writing out the next
* buffer if it still contains unwritten data.
*
* The global LogwrtRqst.Write pointer needs to be advanced to include the
* just-filled page. If we can do this for free (without an extra lock),
* we do so here. Otherwise the caller must do it. We return TRUE if the
* request update still needs to be done, FALSE if we did it internally.
*
* Must be called with WALInsertLock held.
*/
static bool
AdvanceXLInsertBuffer(void)
{
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogCtlWrite *Write = &XLogCtl->Write;
uint16 nextidx = NextBufIdx(Insert->curridx);
bool update_needed = true;
XLogRecPtr OldPageRqstPtr;
XLogwrtRqst WriteRqst;
XLogRecPtr NewPageEndPtr;
XLogPageHeader NewPage;
/* Use Insert->LogwrtResult copy if it's more fresh */
if (XLByteLT(LogwrtResult.Write, Insert->LogwrtResult.Write))
LogwrtResult = Insert->LogwrtResult;
/*
* Get ending-offset of the buffer page we need to replace (this may
* be zero if the buffer hasn't been used yet). Fall through if it's
* already written out.
*/
OldPageRqstPtr = XLogCtl->xlblocks[nextidx];
if (!XLByteLE(OldPageRqstPtr, LogwrtResult.Write))
{
/* nope, got work to do... */
XLogRecPtr FinishedPageRqstPtr;
FinishedPageRqstPtr = XLogCtl->xlblocks[Insert->curridx];
/* Before waiting, get info_lck and update LogwrtResult */
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire_NoHoldoff(&xlogctl->info_lck);
if (XLByteLT(xlogctl->LogwrtRqst.Write, FinishedPageRqstPtr))
xlogctl->LogwrtRqst.Write = FinishedPageRqstPtr;
LogwrtResult = xlogctl->LogwrtResult;
SpinLockRelease_NoHoldoff(&xlogctl->info_lck);
}
update_needed = false; /* Did the shared-request update */
if (XLByteLE(OldPageRqstPtr, LogwrtResult.Write))
{
/* OK, someone wrote it already */
Insert->LogwrtResult = LogwrtResult;
}
else
{
/* Must acquire write lock */
LWLockAcquire(WALWriteLock, LW_EXCLUSIVE);
LogwrtResult = Write->LogwrtResult;
if (XLByteLE(OldPageRqstPtr, LogwrtResult.Write))
{
/* OK, someone wrote it already */
LWLockRelease(WALWriteLock);
Insert->LogwrtResult = LogwrtResult;
}
else
{
/*
* Have to write buffers while holding insert lock. This
* is not good, so only write as much as we absolutely
* must.
*/
WriteRqst.Write = OldPageRqstPtr;
WriteRqst.Flush.xlogid = 0;
WriteRqst.Flush.xrecoff = 0;
XLogWrite(WriteRqst);
LWLockRelease(WALWriteLock);
Insert->LogwrtResult = LogwrtResult;
}
}
}
/*
* Now the next buffer slot is free and we can set it up to be the
* next output page.
*/
NewPageEndPtr = XLogCtl->xlblocks[Insert->curridx];
if (NewPageEndPtr.xrecoff >= XLogFileSize)
{
/* crossing a logid boundary */
NewPageEndPtr.xlogid += 1;
NewPageEndPtr.xrecoff = BLCKSZ;
}
else
NewPageEndPtr.xrecoff += BLCKSZ;
XLogCtl->xlblocks[nextidx] = NewPageEndPtr;
NewPage = (XLogPageHeader) (XLogCtl->pages + nextidx * BLCKSZ);
Insert->curridx = nextidx;
Insert->currpage = NewPage;
Insert->currpos = ((char *) NewPage) + SizeOfXLogPHD;
/*
* Be sure to re-zero the buffer so that bytes beyond what we've
* written will look like zeroes and not valid XLOG records...
*/
MemSet((char *) NewPage, 0, BLCKSZ);
/* And fill the new page's header */
NewPage->xlp_magic = XLOG_PAGE_MAGIC;
/* NewPage->xlp_info = 0; */ /* done by memset */
NewPage->xlp_sui = ThisStartUpID;
NewPage->xlp_pageaddr.xlogid = NewPageEndPtr.xlogid;
NewPage->xlp_pageaddr.xrecoff = NewPageEndPtr.xrecoff - BLCKSZ;
return update_needed;
}
/*
* Write and/or fsync the log at least as far as WriteRqst indicates.
*
* Must be called with WALWriteLock held.
*/
static void
XLogWrite(XLogwrtRqst WriteRqst)
{
XLogCtlWrite *Write = &XLogCtl->Write;
char *from;
bool ispartialpage;
bool use_existent;
uint32 data_size,total_size,first_time,current_xrecoff;
/*
* Update local LogwrtResult (caller probably did this already,
* but...)
*/
LogwrtResult = Write->LogwrtResult;
first_time=1;
current_xrecoff=LogwrtResult.Write.xrecoff;
while (XLByteLT(LogwrtResult.Write, WriteRqst.Write))
{
/*
* Make sure we're not ahead of the insert process. This could
* happen if we're passed a bogus WriteRqst.Write that is past the
* end of the last page that's been initialized by
* AdvanceXLInsertBuffer.
*/
if (!XLByteLT(LogwrtResult.Write, XLogCtl->xlblocks[Write->curridx]))
elog(STOP, "XLogWrite: write request %X/%X is past end of log %X/%X",
LogwrtResult.Write.xlogid, LogwrtResult.Write.xrecoff,
XLogCtl->xlblocks[Write->curridx].xlogid,
XLogCtl->xlblocks[Write->curridx].xrecoff);
/* Advance LogwrtResult.Write to end of current buffer page */
LogwrtResult.Write = XLogCtl->xlblocks[Write->curridx];
ispartialpage = XLByteLT(WriteRqst.Write, LogwrtResult.Write);
if (!XLByteInPrevSeg(LogwrtResult.Write, openLogId, openLogSeg))
{
/*
* Switch to new logfile segment.
*/
if (openLogFile >= 0)
{
if (close(openLogFile) != 0)
elog(STOP, "close of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
openLogFile = -1;
}
XLByteToPrevSeg(LogwrtResult.Write, openLogId, openLogSeg);
/* create/use new log file */
use_existent = true;
openLogFile = XLogFileInit(openLogId, openLogSeg,
&use_existent, true);
openLogOff = 0;
if (!use_existent) /* there was no precreated file */
elog(LOG, "XLogWrite: new log file created - "
"consider increasing WAL_FILES");
/* update pg_control, unless someone else already did */
LWLockAcquire(ControlFileLock, LW_EXCLUSIVE);
if (ControlFile->logId < openLogId ||
(ControlFile->logId == openLogId &&
ControlFile->logSeg < openLogSeg + 1))
{
ControlFile->logId = openLogId;
ControlFile->logSeg = openLogSeg + 1;
ControlFile->time = time(NULL);
UpdateControlFile();
/*
* Signal postmaster to start a checkpoint if it's been
* too long since the last one. (We look at local copy of
* RedoRecPtr which might be a little out of date, but
* should be close enough for this purpose.)
*/
if (IsUnderPostmaster &&
(openLogId != RedoRecPtr.xlogid ||
openLogSeg >= (RedoRecPtr.xrecoff / XLogSegSize) +
(uint32) CheckPointSegments))
{
if (XLOG_DEBUG)
elog(DEBUG, "XLogWrite: time for a checkpoint, signaling postmaster");
SendPostmasterSignal(PMSIGNAL_DO_CHECKPOINT);
}
}
LWLockRelease(ControlFileLock);
}
if (openLogFile < 0)
{
XLByteToPrevSeg(LogwrtResult.Write, openLogId, openLogSeg);
openLogFile = XLogFileOpen(openLogId, openLogSeg, false);
openLogOff = 0;
}
/* Need to seek in the file? */
if (openLogOff != (current_xrecoff ) % XLogSegSize)
{
openLogOff = (current_xrecoff ) % XLogSegSize;
if (lseek(openLogFile, (off_t) openLogOff, SEEK_SET) < 0)
elog(STOP, "lseek of log file %u, segment %u, offset %u failed: %m",
openLogId, openLogSeg, openLogOff);
}
/* OK to write the page */
from = XLogCtl->pages + Write->curridx * BLCKSZ;
data_size=BLCKSZ ;
total_size=BLCKSZ ;
{ /* compute the data size to write in to the file */
int offset;
int type=0; /* used only for display debug info */
offset= current_xrecoff % BLCKSZ ;
from = XLogCtl->pages + Write->curridx * BLCKSZ +offset ;
if (!ispartialpage && first_time==0)
{
data_size=BLCKSZ ;
total_size=BLCKSZ ;
type=1;
}else
{
if(ispartialpage)
{
type=2;
data_size=WriteRqst.Write.xrecoff-current_xrecoff;
if ( (offset+data_size+sizeof(XLogRecord)) <= BLCKSZ)
{
total_size=data_size+sizeof(XLogRecord); type=5;
}else
{
total_size=BLCKSZ-offset;
}
}else
{
data_size=BLCKSZ-(current_xrecoff-((current_xrecoff/BLCKSZ)*BLCKSZ));
total_size=data_size;
type=3;
}
}
current_xrecoff=current_xrecoff+data_size;
if (XLOG_DEBUG)
elog(DEBUG,"XLogWrite type:%d from:%x(%d) data size:%d totalsize:%d Fileoffset:%d
\n",type,from,from,data_size,total_size,openLogOff);
first_time=0;
}
errno = 0;
if (write(openLogFile, from, total_size) != total_size)
{
/* if write didn't set errno, assume problem is no disk space */
if (errno == 0)
errno = ENOSPC;
elog(STOP, "write of log file %u, segment %u, offset %u failed: %m",
openLogId, openLogSeg, openLogOff);
}
openLogOff += total_size;
/*
* If we just wrote the whole last page of a logfile segment,
* fsync the segment immediately. This avoids having to go back
* and re-open prior segments when an fsync request comes along
* later. Doing it here ensures that one and only one backend will
* perform this fsync.
*/
if (openLogOff >= XLogSegSize && !ispartialpage)
{
issue_xlog_fsync();
LogwrtResult.Flush = LogwrtResult.Write; /* end of current page */
}
if (ispartialpage)
{
/* Only asked to write a partial page */
LogwrtResult.Write = WriteRqst.Write;
break;
}
Write->curridx = NextBufIdx(Write->curridx);
}
/*
* If asked to flush, do so
*/
if (XLByteLT(LogwrtResult.Flush, WriteRqst.Flush) &&
XLByteLT(LogwrtResult.Flush, LogwrtResult.Write))
{
/*
* Could get here without iterating above loop, in which case we
* might have no open file or the wrong one. However, we do not
* need to fsync more than one file.
*/
if (sync_method != SYNC_METHOD_OPEN)
{
if (openLogFile >= 0 &&
!XLByteInPrevSeg(LogwrtResult.Write, openLogId, openLogSeg))
{
if (close(openLogFile) != 0)
elog(STOP, "close of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
openLogFile = -1;
}
if (openLogFile < 0)
{
XLByteToPrevSeg(LogwrtResult.Write, openLogId, openLogSeg);
openLogFile = XLogFileOpen(openLogId, openLogSeg, false);
openLogOff = 0;
}
issue_xlog_fsync();
}
LogwrtResult.Flush = LogwrtResult.Write;
}
/*
* Update shared-memory status
*
* We make sure that the shared 'request' values do not fall behind the
* 'result' values. This is not absolutely essential, but it saves
* some code in a couple of places.
*/
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire_NoHoldoff(&xlogctl->info_lck);
xlogctl->LogwrtResult = LogwrtResult;
if (XLByteLT(xlogctl->LogwrtRqst.Write, LogwrtResult.Write))
xlogctl->LogwrtRqst.Write = LogwrtResult.Write;
if (XLByteLT(xlogctl->LogwrtRqst.Flush, LogwrtResult.Flush))
xlogctl->LogwrtRqst.Flush = LogwrtResult.Flush;
SpinLockRelease_NoHoldoff(&xlogctl->info_lck);
}
Write->LogwrtResult = LogwrtResult;
}
/*
* Ensure that all XLOG data through the given position is flushed to disk.
*
* NOTE: this differs from XLogWrite mainly in that the WALWriteLock is not
* already held, and we try to avoid acquiring it if possible.
*/
void
XLogFlush(XLogRecPtr record)
{
XLogRecPtr WriteRqstPtr;
XLogwrtRqst WriteRqst;
if (XLOG_DEBUG)
{
elog(DEBUG, "XLogFlush%s%s: request %X/%X; write %X/%X; flush %X/%X\n",
(IsBootstrapProcessingMode()) ? "(bootstrap)" : "",
(InRedo) ? "(redo)" : "",
record.xlogid, record.xrecoff,
LogwrtResult.Write.xlogid, LogwrtResult.Write.xrecoff,
LogwrtResult.Flush.xlogid, LogwrtResult.Flush.xrecoff);
fflush(stderr);
}
/* Disabled during REDO */
if (InRedo)
return;
/* Quick exit if already known flushed */
if (XLByteLE(record, LogwrtResult.Flush))
return;
START_CRIT_SECTION();
/*
* Since fsync is usually a horribly expensive operation, we try to
* piggyback as much data as we can on each fsync: if we see any more
* data entered into the xlog buffer, we'll write and fsync that too,
* so that the final value of LogwrtResult.Flush is as large as
* possible. This gives us some chance of avoiding another fsync
* immediately after.
*/
/* initialize to given target; may increase below */
WriteRqstPtr = record;
/* read LogwrtResult and update local state */
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire_NoHoldoff(&xlogctl->info_lck);
if (XLByteLT(WriteRqstPtr, xlogctl->LogwrtRqst.Write))
WriteRqstPtr = xlogctl->LogwrtRqst.Write;
LogwrtResult = xlogctl->LogwrtResult;
SpinLockRelease_NoHoldoff(&xlogctl->info_lck);
}
/* done already? */
if (!XLByteLE(record, LogwrtResult.Flush))
{
/* if something was added to log cache then try to flush this too */
if (LWLockConditionalAcquire(WALInsertLock, LW_EXCLUSIVE))
{
XLogCtlInsert *Insert = &XLogCtl->Insert;
uint32 freespace = INSERT_FREESPACE(Insert);
if (freespace < SizeOfXLogRecord) /* buffer is full */
WriteRqstPtr = XLogCtl->xlblocks[Insert->curridx];
else
{
WriteRqstPtr = XLogCtl->xlblocks[Insert->curridx];
WriteRqstPtr.xrecoff -= freespace;
}
LWLockRelease(WALInsertLock);
}
/* now wait for the write lock */
LWLockAcquire(WALWriteLock, LW_EXCLUSIVE);
LogwrtResult = XLogCtl->Write.LogwrtResult;
if (!XLByteLE(record, LogwrtResult.Flush))
{
WriteRqst.Write = WriteRqstPtr;
WriteRqst.Flush = record;
XLogWrite(WriteRqst);
}
LWLockRelease(WALWriteLock);
}
END_CRIT_SECTION();
/*
* If we still haven't flushed to the request point then we have a
* problem; most likely, the requested flush point is past end of XLOG.
* This has been seen to occur when a disk page has a corrupted LSN.
*
* Formerly we treated this as a STOP condition, but that hurts the
* system's robustness rather than helping it: we do not want to take
* down the whole system due to corruption on one data page. In
* particular, if the bad page is encountered again during recovery then
* we would be unable to restart the database at all! (This scenario
* has actually happened in the field several times with 7.1 releases.
* Note that we cannot get here while InRedo is true, but if the bad
* page is brought in and marked dirty during recovery then
* CreateCheckpoint will try to flush it at the end of recovery.)
*
* The current approach is to ERROR under normal conditions, but only
* NOTICE during recovery, so that the system can be brought up even if
* there's a corrupt LSN. Note that for calls from xact.c, the ERROR
* will be promoted to STOP since xact.c calls this routine inside a
* critical section. However, calls from bufmgr.c are not within
* critical sections and so we will not force a restart for a bad LSN
* on a data page.
*/
if (XLByteLT(LogwrtResult.Flush, record))
elog(InRecovery ? NOTICE : ERROR,
"XLogFlush: request %X/%X is not satisfied --- flushed only to %X/%X",
record.xlogid, record.xrecoff,
LogwrtResult.Flush.xlogid, LogwrtResult.Flush.xrecoff);
}
/*
* Create a new XLOG file segment, or open a pre-existing one.
*
* log, seg: identify segment to be created/opened.
*
* *use_existent: if TRUE, OK to use a pre-existing file (else, any
* pre-existing file will be deleted). On return, TRUE if a pre-existing
* file was used.
*
* use_lock: if TRUE, acquire ControlFileLock while moving file into
* place. This should be TRUE except during bootstrap log creation. The
* caller must *not* hold the lock at call.
*
* Returns FD of opened file.
*/
static int
XLogFileInit(uint32 log, uint32 seg,
bool *use_existent, bool use_lock)
{
char path[MAXPGPATH];
char tmppath[MAXPGPATH];
char zbuffer[BLCKSZ];
int fd;
int nbytes;
XLogFileName(path, log, seg);
/*
* Try to use existent file (checkpoint maker may have created it
* already)
*/
if (*use_existent)
{
fd = BasicOpenFile(path, O_RDWR | PG_BINARY | XLOG_SYNC_BIT,
S_IRUSR | S_IWUSR);
if (fd < 0)
{
if (errno != ENOENT)
elog(STOP, "open of %s (log file %u, segment %u) failed: %m",
path, log, seg);
}
else
return (fd);
}
/*
* Initialize an empty (all zeroes) segment. NOTE: it is possible
* that another process is doing the same thing. If so, we will end
* up pre-creating an extra log segment. That seems OK, and better
* than holding the lock throughout this lengthy process.
*/
snprintf(tmppath, MAXPGPATH, "%s/xlogtemp.%d",
XLogDir, (int) getpid());
unlink(tmppath);
/* do not use XLOG_SYNC_BIT here --- want to fsync only at end of fill */
fd = BasicOpenFile(tmppath, O_RDWR | O_CREAT | O_EXCL | PG_BINARY,
S_IRUSR | S_IWUSR);
if (fd < 0)
elog(STOP, "creation of file %s failed: %m", tmppath);
/*
* Zero-fill the file. We have to do this the hard way to ensure that
* all the file space has really been allocated --- on platforms that
* allow "holes" in files, just seeking to the end doesn't allocate
* intermediate space. This way, we know that we have all the space
* and (after the fsync below) that all the indirect blocks are down
* on disk. Therefore, fdatasync(2) or O_DSYNC will be sufficient to
* sync future writes to the log file.
*/
MemSet(zbuffer, 0, sizeof(zbuffer));
for (nbytes = 0; nbytes < XLogSegSize; nbytes += sizeof(zbuffer))
{
errno = 0;
if ((int) write(fd, zbuffer, sizeof(zbuffer)) != (int) sizeof(zbuffer))
{
int save_errno = errno;
/*
* If we fail to make the file, delete it to release disk
* space
*/
unlink(tmppath);
/* if write didn't set errno, assume problem is no disk space */
errno = save_errno ? save_errno : ENOSPC;
elog(STOP, "ZeroFill failed to write %s: %m", tmppath);
}
}
if (pg_fsync(fd) != 0)
elog(STOP, "fsync of file %s failed: %m", tmppath);
close(fd);
/*
* Now move the segment into place with its final name.
*
* If caller didn't want to use a pre-existing file, get rid of any
* pre-existing file. Otherwise, cope with possibility that someone
* else has created the file while we were filling ours: if so, use
* ours to pre-create a future log segment.
*/
if (!InstallXLogFileSegment(log, seg, tmppath,
*use_existent, XLOGfiles + XLOGfileslop,
use_lock))
{
/* No need for any more future segments... */
unlink(tmppath);
}
/* Set flag to tell caller there was no existent file */
*use_existent = false;
/* Now open original target segment (might not be file I just made) */
fd = BasicOpenFile(path, O_RDWR | PG_BINARY | XLOG_SYNC_BIT,
S_IRUSR | S_IWUSR);
if (fd < 0)
elog(STOP, "open of %s (log file %u, segment %u) failed: %m",
path, log, seg);
return (fd);
}
/*
* Install a new XLOG segment file as a current or future log segment.
*
* This is used both to install a newly-created segment (which has a temp
* filename while it's being created) and to recycle an old segment.
*
* log, seg: identify segment to install as (or first possible target).
*
* tmppath: initial name of file to install. It will be renamed into place.
*
* find_free: if TRUE, install the new segment at the first empty log/seg
* number at or after the passed numbers. If FALSE, install the new segment
* exactly where specified, deleting any existing segment file there.
*
* max_advance: maximum number of log/seg slots to advance past the starting
* point. Fail if no free slot is found in this range. (Irrelevant if
* find_free is FALSE.)
*
* use_lock: if TRUE, acquire ControlFileLock while moving file into
* place. This should be TRUE except during bootstrap log creation. The
* caller must *not* hold the lock at call.
*
* Returns TRUE if file installed, FALSE if not installed because of
* exceeding max_advance limit. (Any other kind of failure causes elog().)
*/
static bool
InstallXLogFileSegment(uint32 log, uint32 seg, char *tmppath,
bool find_free, int max_advance,
bool use_lock)
{
char path[MAXPGPATH];
int fd;
XLogFileName(path, log, seg);
/*
* We want to be sure that only one process does this at a time.
*/
if (use_lock)
LWLockAcquire(ControlFileLock, LW_EXCLUSIVE);
if (!find_free)
{
/* Force installation: get rid of any pre-existing segment file */
unlink(path);
}
else
{
/* Find a free slot to put it in */
while ((fd = BasicOpenFile(path, O_RDWR | PG_BINARY,
S_IRUSR | S_IWUSR)) >= 0)
{
close(fd);
if (--max_advance < 0)
{
/* Failed to find a free slot within specified range */
if (use_lock)
LWLockRelease(ControlFileLock);
return false;
}
NextLogSeg(log, seg);
XLogFileName(path, log, seg);
}
}
/*
* Prefer link() to rename() here just to be really sure that we don't
* overwrite an existing logfile. However, there shouldn't be one, so
* rename() is an acceptable substitute except for the truly paranoid.
*/
#ifndef __BEOS__
if (link(tmppath, path) < 0)
elog(STOP, "link from %s to %s (initialization of log file %u, segment %u) failed: %m",
tmppath, path, log, seg);
unlink(tmppath);
#else
if (rename(tmppath, path) < 0)
elog(STOP, "rename from %s to %s (initialization of log file %u, segment %u) failed: %m",
tmppath, path, log, seg);
#endif
if (use_lock)
LWLockRelease(ControlFileLock);
return true;
}
/*
* Open a pre-existing logfile segment.
*/
static int
XLogFileOpen(uint32 log, uint32 seg, bool econt)
{
char path[MAXPGPATH];
int fd;
XLogFileName(path, log, seg);
fd = BasicOpenFile(path, O_RDWR | PG_BINARY | XLOG_SYNC_BIT,
S_IRUSR | S_IWUSR);
if (fd < 0)
{
if (econt && errno == ENOENT)
{
elog(LOG, "open of %s (log file %u, segment %u) failed: %m",
path, log, seg);
return (fd);
}
elog(STOP, "open of %s (log file %u, segment %u) failed: %m",
path, log, seg);
}
return (fd);
}
/*
* Preallocate log files beyond the specified log endpoint, according to
* the XLOGfile user parameter.
*/
static void
PreallocXlogFiles(XLogRecPtr endptr)
{
uint32 _logId;
uint32 _logSeg;
int lf;
bool use_existent;
int i;
XLByteToPrevSeg(endptr, _logId, _logSeg);
if (XLOGfiles > 0)
{
for (i = 1; i <= XLOGfiles; i++)
{
NextLogSeg(_logId, _logSeg);
use_existent = true;
lf = XLogFileInit(_logId, _logSeg, &use_existent, true);
close(lf);
}
}
else if ((endptr.xrecoff - 1) % XLogSegSize >=
(uint32) (0.75 * XLogSegSize))
{
NextLogSeg(_logId, _logSeg);
use_existent = true;
lf = XLogFileInit(_logId, _logSeg, &use_existent, true);
close(lf);
}
}
/*
* Remove or move offline all log files older or equal to passed log/seg#
*
* endptr is current (or recent) end of xlog; this is used to determine
* whether we want to recycle rather than delete no-longer-wanted log files.
*/
static void
MoveOfflineLogs(uint32 log, uint32 seg, XLogRecPtr endptr)
{
uint32 endlogId;
uint32 endlogSeg;
DIR *xldir;
struct dirent *xlde;
char lastoff[32];
char path[MAXPGPATH];
XLByteToPrevSeg(endptr, endlogId, endlogSeg);
xldir = opendir(XLogDir);
if (xldir == NULL)
elog(STOP, "could not open transaction log directory (%s): %m",
XLogDir);
sprintf(lastoff, "%08X%08X", log, seg);
errno = 0;
while ((xlde = readdir(xldir)) != NULL)
{
if (strlen(xlde->d_name) == 16 &&
strspn(xlde->d_name, "0123456789ABCDEF") == 16 &&
strcmp(xlde->d_name, lastoff) <= 0)
{
snprintf(path, MAXPGPATH, "%s/%s", XLogDir, xlde->d_name);
if (XLOG_archive_dir[0])
{
elog(LOG, "archiving transaction log file %s",
xlde->d_name);
elog(NOTICE, "archiving log files is not implemented!");
}
else
{
/*
* Before deleting the file, see if it can be recycled as
* a future log segment. We allow recycling segments up
* to XLOGfiles + XLOGfileslop segments beyond the current
* XLOG location.
*/
if (InstallXLogFileSegment(endlogId, endlogSeg, path,
true, XLOGfiles + XLOGfileslop,
true))
{
elog(LOG, "recycled transaction log file %s",
xlde->d_name);
}
else
{
/* No need for any more future segments... */
elog(LOG, "removing transaction log file %s",
xlde->d_name);
unlink(path);
}
}
}
errno = 0;
}
if (errno)
elog(STOP, "could not read transaction log directory (%s): %m",
XLogDir);
closedir(xldir);
}
/*
* Restore the backup blocks present in an XLOG record, if any.
*
* We assume all of the record has been read into memory at *record.
*/
static void
RestoreBkpBlocks(XLogRecord *record, XLogRecPtr lsn)
{
Relation reln;
Buffer buffer;
Page page;
BkpBlock bkpb;
char *blk;
int i;
blk = (char *) XLogRecGetData(record) + record->xl_len;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (!(record->xl_info & XLR_SET_BKP_BLOCK(i)))
continue;
memcpy((char *) &bkpb, blk, sizeof(BkpBlock));
blk += sizeof(BkpBlock);
reln = XLogOpenRelation(true, record->xl_rmid, bkpb.node);
if (reln)
{
buffer = XLogReadBuffer(true, reln, bkpb.block);
if (BufferIsValid(buffer))
{
page = (Page) BufferGetPage(buffer);
memcpy((char *) page, blk, BLCKSZ);
PageSetLSN(page, lsn);
PageSetSUI(page, ThisStartUpID);
UnlockAndWriteBuffer(buffer);
}
}
blk += BLCKSZ;
}
}
/*
* CRC-check an XLOG record. We do not believe the contents of an XLOG
* record (other than to the minimal extent of computing the amount of
* data to read in) until we've checked the CRCs.
*
* We assume all of the record has been read into memory at *record.
*/
static bool
RecordIsValid(XLogRecord *record, XLogRecPtr recptr, int emode)
{
crc64 crc;
crc64 cbuf;
int i;
uint32 len = record->xl_len;
char *blk;
/* Check CRC of rmgr data and record header */
INIT_CRC64(crc);
COMP_CRC64(crc, XLogRecGetData(record), len);
COMP_CRC64(crc, (char *) record + sizeof(crc64),
SizeOfXLogRecord - sizeof(crc64));
FIN_CRC64(crc);
if (!EQ_CRC64(record->xl_crc, crc))
{
elog(emode, "ReadRecord: bad resource manager data checksum in record at %X/%X",
recptr.xlogid, recptr.xrecoff);
return (false);
}
/* Check CRCs of backup blocks, if any */
blk = (char *) XLogRecGetData(record) + len;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (!(record->xl_info & XLR_SET_BKP_BLOCK(i)))
continue;
INIT_CRC64(crc);
COMP_CRC64(crc, blk + sizeof(BkpBlock), BLCKSZ);
COMP_CRC64(crc, blk + sizeof(crc64),
sizeof(BkpBlock) - sizeof(crc64));
FIN_CRC64(crc);
memcpy((char *) &cbuf, blk, sizeof(crc64)); /* don't assume
* alignment */
if (!EQ_CRC64(cbuf, crc))
{
elog(emode, "ReadRecord: bad checksum of backup block %d in record at %X/%X",
i + 1, recptr.xlogid, recptr.xrecoff);
return (false);
}
blk += sizeof(BkpBlock) + BLCKSZ;
}
return (true);
}
/*
* Attempt to read an XLOG record.
*
* If RecPtr is not NULL, try to read a record at that position. Otherwise
* try to read a record just after the last one previously read.
*
* If no valid record is available, returns NULL, or fails if emode is STOP.
* (emode must be either STOP or LOG.)
*
* buffer is a workspace at least _INTL_MAXLOGRECSZ bytes long. It is needed
* to reassemble a record that crosses block boundaries. Note that on
* successful return, the returned record pointer always points at buffer.
*/
static XLogRecord *
ReadRecord(XLogRecPtr *RecPtr, int emode, char *buffer)
{
XLogRecord *record;
XLogRecPtr tmpRecPtr = EndRecPtr;
uint32 len,
total_len;
uint32 targetPageOff;
unsigned i;
bool nextmode = false;
if (readBuf == NULL)
{
/*
* First time through, permanently allocate readBuf. We do it
* this way, rather than just making a static array, for two
* reasons: (1) no need to waste the storage in most
* instantiations of the backend; (2) a static char array isn't
* guaranteed to have any particular alignment, whereas malloc()
* will provide MAXALIGN'd storage.
*/
readBuf = (char *) malloc(BLCKSZ);
Assert(readBuf != NULL);
}
if (RecPtr == NULL)
{
RecPtr = &tmpRecPtr;
nextmode = true;
/* fast case if next record is on same page */
if (nextRecord != NULL)
{
record = nextRecord;
goto got_record;
}
/* align old recptr to next page */
if (tmpRecPtr.xrecoff % BLCKSZ != 0)
tmpRecPtr.xrecoff += (BLCKSZ - tmpRecPtr.xrecoff % BLCKSZ);
if (tmpRecPtr.xrecoff >= XLogFileSize)
{
(tmpRecPtr.xlogid)++;
tmpRecPtr.xrecoff = 0;
}
tmpRecPtr.xrecoff += SizeOfXLogPHD;
}
else if (!XRecOffIsValid(RecPtr->xrecoff))
elog(STOP, "ReadRecord: invalid record offset at %X/%X",
RecPtr->xlogid, RecPtr->xrecoff);
if (readFile >= 0 && !XLByteInSeg(*RecPtr, readId, readSeg))
{
close(readFile);
readFile = -1;
}
XLByteToSeg(*RecPtr, readId, readSeg);
if (readFile < 0)
{
readFile = XLogFileOpen(readId, readSeg, (emode == LOG));
if (readFile < 0)
goto next_record_is_invalid;
readOff = (uint32) (-1); /* force read to occur below */
}
targetPageOff = ((RecPtr->xrecoff % XLogSegSize) / BLCKSZ) * BLCKSZ;
if (readOff != targetPageOff)
{
readOff = targetPageOff;
if (lseek(readFile, (off_t) readOff, SEEK_SET) < 0)
{
elog(emode, "ReadRecord: lseek of log file %u, segment %u, offset %u failed: %m",
readId, readSeg, readOff);
goto next_record_is_invalid;
}
if (read(readFile, readBuf, BLCKSZ) != BLCKSZ)
{
elog(emode, "ReadRecord: read of log file %u, segment %u, offset %u failed: %m",
readId, readSeg, readOff);
goto next_record_is_invalid;
}
if (!ValidXLOGHeader((XLogPageHeader) readBuf, emode, nextmode))
goto next_record_is_invalid;
}
if ((((XLogPageHeader) readBuf)->xlp_info & XLP_FIRST_IS_CONTRECORD) &&
RecPtr->xrecoff % BLCKSZ == SizeOfXLogPHD)
{
elog(emode, "ReadRecord: contrecord is requested by %X/%X",
RecPtr->xlogid, RecPtr->xrecoff);
goto next_record_is_invalid;
}
record = (XLogRecord *) ((char *) readBuf + RecPtr->xrecoff % BLCKSZ);
got_record:;
/*
* Currently, xl_len == 0 must be bad data, but that might not be true
* forever. See note in XLogInsert.
*/
if (record->xl_len == 0)
{
elog(emode, "ReadRecord: record with zero length at %X/%X",
RecPtr->xlogid, RecPtr->xrecoff);
goto next_record_is_invalid;
}
/*
* Compute total length of record including any appended backup
* blocks.
*/
total_len = SizeOfXLogRecord + record->xl_len;
for (i = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (!(record->xl_info & XLR_SET_BKP_BLOCK(i)))
continue;
total_len += sizeof(BkpBlock) + BLCKSZ;
}
/*
* Make sure it will fit in buffer (currently, it is mechanically
* impossible for this test to fail, but it seems like a good idea
* anyway).
*/
if (total_len > _INTL_MAXLOGRECSZ)
{
elog(emode, "ReadRecord: record length %u at %X/%X too long",
total_len, RecPtr->xlogid, RecPtr->xrecoff);
goto next_record_is_invalid;
}
if (record->xl_rmid > RM_MAX_ID)
{
elog(emode, "ReadRecord: invalid resource manager id %u at %X/%X",
record->xl_rmid, RecPtr->xlogid, RecPtr->xrecoff);
goto next_record_is_invalid;
}
nextRecord = NULL;
len = BLCKSZ - RecPtr->xrecoff % BLCKSZ;
if (total_len > len)
{
/* Need to reassemble record */
XLogContRecord *contrecord;
uint32 gotlen = len;
memcpy(buffer, record, len);
record = (XLogRecord *) buffer;
buffer += len;
for (;;)
{
readOff += BLCKSZ;
if (readOff >= XLogSegSize)
{
close(readFile);
readFile = -1;
NextLogSeg(readId, readSeg);
readFile = XLogFileOpen(readId, readSeg, (emode == LOG));
if (readFile < 0)
goto next_record_is_invalid;
readOff = 0;
}
if (read(readFile, readBuf, BLCKSZ) != BLCKSZ)
{
elog(emode, "ReadRecord: read of log file %u, segment %u, offset %u failed: %m",
readId, readSeg, readOff);
goto next_record_is_invalid;
}
if (!ValidXLOGHeader((XLogPageHeader) readBuf, emode, true))
goto next_record_is_invalid;
if (!(((XLogPageHeader) readBuf)->xlp_info & XLP_FIRST_IS_CONTRECORD))
{
elog(emode, "ReadRecord: there is no ContRecord flag in log file %u, segment %u, offset %u",
readId, readSeg, readOff);
goto next_record_is_invalid;
}
contrecord = (XLogContRecord *) ((char *) readBuf + SizeOfXLogPHD);
if (contrecord->xl_rem_len == 0 ||
total_len != (contrecord->xl_rem_len + gotlen))
{
elog(emode, "ReadRecord: invalid ContRecord length %u in log file %u, segment %u, offset %u",
contrecord->xl_rem_len, readId, readSeg, readOff);
goto next_record_is_invalid;
}
len = BLCKSZ - SizeOfXLogPHD - SizeOfXLogContRecord;
if (contrecord->xl_rem_len > len)
{
memcpy(buffer, (char *) contrecord + SizeOfXLogContRecord, len);
gotlen += len;
buffer += len;
continue;
}
memcpy(buffer, (char *) contrecord + SizeOfXLogContRecord,
contrecord->xl_rem_len);
break;
}
if (!RecordIsValid(record, *RecPtr, emode))
goto next_record_is_invalid;
if (BLCKSZ - SizeOfXLogRecord >= SizeOfXLogPHD +
SizeOfXLogContRecord + MAXALIGN(contrecord->xl_rem_len))
{
nextRecord = (XLogRecord *) ((char *) contrecord +
SizeOfXLogContRecord + MAXALIGN(contrecord->xl_rem_len));
}
EndRecPtr.xlogid = readId;
EndRecPtr.xrecoff = readSeg * XLogSegSize + readOff +
SizeOfXLogPHD + SizeOfXLogContRecord +
MAXALIGN(contrecord->xl_rem_len);
ReadRecPtr = *RecPtr;
return record;
}
/* Record does not cross a page boundary */
if (!RecordIsValid(record, *RecPtr, emode))
goto next_record_is_invalid;
if (BLCKSZ - SizeOfXLogRecord >= RecPtr->xrecoff % BLCKSZ +
MAXALIGN(total_len))
nextRecord = (XLogRecord *) ((char *) record + MAXALIGN(total_len));
EndRecPtr.xlogid = RecPtr->xlogid;
EndRecPtr.xrecoff = RecPtr->xrecoff + MAXALIGN(total_len);
ReadRecPtr = *RecPtr;
memcpy(buffer, record, total_len);
return (XLogRecord *) buffer;
next_record_is_invalid:;
close(readFile);
readFile = -1;
nextRecord = NULL;
return NULL;
}
/*
* Check whether the xlog header of a page just read in looks valid.
*
* This is just a convenience subroutine to avoid duplicated code in
* ReadRecord. It's not intended for use from anywhere else.
*/
static bool
ValidXLOGHeader(XLogPageHeader hdr, int emode, bool checkSUI)
{
XLogRecPtr recaddr;
if (hdr->xlp_magic != XLOG_PAGE_MAGIC)
{
elog(emode, "ReadRecord: invalid magic number %04X in log file %u, segment %u, offset %u",
hdr->xlp_magic, readId, readSeg, readOff);
return false;
}
if ((hdr->xlp_info & ~XLP_ALL_FLAGS) != 0)
{
elog(emode, "ReadRecord: invalid info bits %04X in log file %u, segment %u, offset %u",
hdr->xlp_info, readId, readSeg, readOff);
return false;
}
recaddr.xlogid = readId;
recaddr.xrecoff = readSeg * XLogSegSize + readOff;
if (!XLByteEQ(hdr->xlp_pageaddr, recaddr))
{
elog(emode, "ReadRecord: unexpected pageaddr %X/%X in log file %u, segment %u, offset %u",
hdr->xlp_pageaddr.xlogid, hdr->xlp_pageaddr.xrecoff,
readId, readSeg, readOff);
return false;
}
/*
* We disbelieve a SUI less than the previous page's SUI, or more than
* a few counts greater. In theory as many as 512 shutdown checkpoint
* records could appear on a 32K-sized xlog page, so that's the most
* differential there could legitimately be.
*
* Note this check can only be applied when we are reading the next page
* in sequence, so ReadRecord passes a flag indicating whether to
* check.
*/
if (checkSUI)
{
if (hdr->xlp_sui < lastReadSUI ||
hdr->xlp_sui > lastReadSUI + 512)
{
/* translator: SUI = startup id */
elog(emode, "ReadRecord: out-of-sequence SUI %u (after %u) in log file %u, segment %u, offset %u",
hdr->xlp_sui, lastReadSUI, readId, readSeg, readOff);
return false;
}
}
lastReadSUI = hdr->xlp_sui;
return true;
}
/*
* I/O routines for pg_control
*
* *ControlFile is a buffer in shared memory that holds an image of the
* contents of pg_control. WriteControlFile() initializes pg_control
* given a preloaded buffer, ReadControlFile() loads the buffer from
* the pg_control file (during postmaster or standalone-backend startup),
* and UpdateControlFile() rewrites pg_control after we modify xlog state.
*
* For simplicity, WriteControlFile() initializes the fields of pg_control
* that are related to checking backend/database compatibility, and
* ReadControlFile() verifies they are correct. We could split out the
* I/O and compatibility-check functions, but there seems no need currently.
*/
void
XLOGPathInit(void)
{
/* Init XLOG file paths */
snprintf(XLogDir, MAXPGPATH, "%s/pg_xlog", DataDir);
snprintf(ControlFilePath, MAXPGPATH, "%s/global/pg_control", DataDir);
}
static void
WriteControlFile(void)
{
int fd;
char buffer[BLCKSZ]; /* need not be aligned */
#ifdef USE_LOCALE
char *localeptr;
#endif
/*
* Initialize version and compatibility-check fields
*/
ControlFile->pg_control_version = PG_CONTROL_VERSION;
ControlFile->catalog_version_no = CATALOG_VERSION_NO;
ControlFile->blcksz = BLCKSZ;
ControlFile->relseg_size = RELSEG_SIZE;
#ifdef USE_LOCALE
localeptr = setlocale(LC_COLLATE, NULL);
if (!localeptr)
elog(STOP, "invalid LC_COLLATE setting");
StrNCpy(ControlFile->lc_collate, localeptr, LOCALE_NAME_BUFLEN);
localeptr = setlocale(LC_CTYPE, NULL);
if (!localeptr)
elog(STOP, "invalid LC_CTYPE setting");
StrNCpy(ControlFile->lc_ctype, localeptr, LOCALE_NAME_BUFLEN);
/*
* Issue warning notice if initdb'ing in a locale that will not permit
* LIKE index optimization. This is not a clean place to do it, but I
* don't see a better place either...
*/
if (!locale_is_like_safe())
elog(NOTICE, "Initializing database with %s collation order."
"\n\tThis locale setting will prevent use of index optimization for"
"\n\tLIKE and regexp searches. If you are concerned about speed of"
"\n\tsuch queries, you may wish to set LC_COLLATE to \"C\" and"
"\n\tre-initdb. For more information see the Administrator's Guide.",
ControlFile->lc_collate);
#else /* not USE_LOCALE */
strcpy(ControlFile->lc_collate, "C");
strcpy(ControlFile->lc_ctype, "C");
#endif /* not USE_LOCALE */
/* Contents are protected with a CRC */
INIT_CRC64(ControlFile->crc);
COMP_CRC64(ControlFile->crc,
(char *) ControlFile + sizeof(crc64),
sizeof(ControlFileData) - sizeof(crc64));
FIN_CRC64(ControlFile->crc);
/*
* We write out BLCKSZ bytes into pg_control, zero-padding the excess
* over sizeof(ControlFileData). This reduces the odds of
* premature-EOF errors when reading pg_control. We'll still fail
* when we check the contents of the file, but hopefully with a more
* specific error than "couldn't read pg_control".
*/
if (sizeof(ControlFileData) > BLCKSZ)
elog(STOP, "sizeof(ControlFileData) is larger than BLCKSZ; fix either one");
memset(buffer, 0, BLCKSZ);
memcpy(buffer, ControlFile, sizeof(ControlFileData));
fd = BasicOpenFile(ControlFilePath, O_RDWR | O_CREAT | O_EXCL | PG_BINARY,
S_IRUSR | S_IWUSR);
if (fd < 0)
elog(STOP, "WriteControlFile: could not create control file (%s): %m",
ControlFilePath);
errno = 0;
if (write(fd, buffer, BLCKSZ) != BLCKSZ)
{
/* if write didn't set errno, assume problem is no disk space */
if (errno == 0)
errno = ENOSPC;
elog(STOP, "WriteControlFile: write to control file failed: %m");
}
if (pg_fsync(fd) != 0)
elog(STOP, "WriteControlFile: fsync of control file failed: %m");
close(fd);
}
static void
ReadControlFile(void)
{
crc64 crc;
int fd;
/*
* Read data...
*/
fd = BasicOpenFile(ControlFilePath, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
if (fd < 0)
elog(STOP, "could not open control file (%s): %m", ControlFilePath);
if (read(fd, ControlFile, sizeof(ControlFileData)) != sizeof(ControlFileData))
elog(STOP, "read from control file failed: %m");
close(fd);
/*
* Check for expected pg_control format version. If this is wrong,
* the CRC check will likely fail because we'll be checking the wrong
* number of bytes. Complaining about wrong version will probably be
* more enlightening than complaining about wrong CRC.
*/
if (ControlFile->pg_control_version != PG_CONTROL_VERSION)
elog(STOP,
"The database cluster was initialized with PG_CONTROL_VERSION %d,\n"
"\tbut the server was compiled with PG_CONTROL_VERSION %d.\n"
"\tIt looks like you need to initdb.",
ControlFile->pg_control_version, PG_CONTROL_VERSION);
/* Now check the CRC. */
INIT_CRC64(crc);
COMP_CRC64(crc,
(char *) ControlFile + sizeof(crc64),
sizeof(ControlFileData) - sizeof(crc64));
FIN_CRC64(crc);
if (!EQ_CRC64(crc, ControlFile->crc))
elog(STOP, "invalid checksum in control file");
/*
* Do compatibility checking immediately. We do this here for 2
* reasons:
*
* (1) if the database isn't compatible with the backend executable, we
* want to abort before we can possibly do any damage;
*
* (2) this code is executed in the postmaster, so the setlocale() will
* propagate to forked backends, which aren't going to read this file
* for themselves. (These locale settings are considered critical
* compatibility items because they can affect sort order of indexes.)
*/
if (ControlFile->catalog_version_no != CATALOG_VERSION_NO)
elog(STOP,
"The database cluster was initialized with CATALOG_VERSION_NO %d,\n"
"\tbut the backend was compiled with CATALOG_VERSION_NO %d.\n"
"\tIt looks like you need to initdb.",
ControlFile->catalog_version_no, CATALOG_VERSION_NO);
if (ControlFile->blcksz != BLCKSZ)
elog(STOP,
"The database cluster was initialized with BLCKSZ %d,\n"
"\tbut the backend was compiled with BLCKSZ %d.\n"
"\tIt looks like you need to initdb.",
ControlFile->blcksz, BLCKSZ);
if (ControlFile->relseg_size != RELSEG_SIZE)
elog(STOP,
"The database cluster was initialized with RELSEG_SIZE %d,\n"
"\tbut the backend was compiled with RELSEG_SIZE %d.\n"
"\tIt looks like you need to initdb.",
ControlFile->relseg_size, RELSEG_SIZE);
#ifdef USE_LOCALE
if (setlocale(LC_COLLATE, ControlFile->lc_collate) == NULL)
elog(STOP,
"The database cluster was initialized with LC_COLLATE '%s',\n"
"\twhich is not recognized by setlocale().\n"
"\tIt looks like you need to initdb.",
ControlFile->lc_collate);
if (setlocale(LC_CTYPE, ControlFile->lc_ctype) == NULL)
elog(STOP,
"The database cluster was initialized with LC_CTYPE '%s',\n"
"\twhich is not recognized by setlocale().\n"
"\tIt looks like you need to initdb.",
ControlFile->lc_ctype);
#else /* not USE_LOCALE */
if (strcmp(ControlFile->lc_collate, "C") != 0 ||
strcmp(ControlFile->lc_ctype, "C") != 0)
elog(STOP,
"The database cluster was initialized with LC_COLLATE '%s' and\n"
"\tLC_CTYPE '%s', but the server was compiled without locale support.\n"
"\tIt looks like you need to initdb or recompile.",
ControlFile->lc_collate, ControlFile->lc_ctype);
#endif /* not USE_LOCALE */
}
void
UpdateControlFile(void)
{
int fd;
INIT_CRC64(ControlFile->crc);
COMP_CRC64(ControlFile->crc,
(char *) ControlFile + sizeof(crc64),
sizeof(ControlFileData) - sizeof(crc64));
FIN_CRC64(ControlFile->crc);
fd = BasicOpenFile(ControlFilePath, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
if (fd < 0)
elog(STOP, "could not open control file (%s): %m", ControlFilePath);
errno = 0;
if (write(fd, ControlFile, sizeof(ControlFileData)) != sizeof(ControlFileData))
{
/* if write didn't set errno, assume problem is no disk space */
if (errno == 0)
errno = ENOSPC;
elog(STOP, "write to control file failed: %m");
}
if (pg_fsync(fd) != 0)
elog(STOP, "fsync of control file failed: %m");
close(fd);
}
/*
* Initialization of shared memory for XLOG
*/
int
XLOGShmemSize(void)
{
if (XLOGbuffers < MinXLOGbuffers)
XLOGbuffers = MinXLOGbuffers;
return MAXALIGN(sizeof(XLogCtlData) + sizeof(XLogRecPtr) * XLOGbuffers)
+ BLCKSZ * XLOGbuffers +
MAXALIGN(sizeof(ControlFileData));
}
void
XLOGShmemInit(void)
{
bool found;
/* this must agree with space requested by XLOGShmemSize() */
if (XLOGbuffers < MinXLOGbuffers)
XLOGbuffers = MinXLOGbuffers;
XLogCtl = (XLogCtlData *)
ShmemInitStruct("XLOG Ctl",
MAXALIGN(sizeof(XLogCtlData) +
sizeof(XLogRecPtr) * XLOGbuffers)
+ BLCKSZ * XLOGbuffers,
&found);
Assert(!found);
ControlFile = (ControlFileData *)
ShmemInitStruct("Control File", sizeof(ControlFileData), &found);
Assert(!found);
memset(XLogCtl, 0, sizeof(XLogCtlData));
/*
* Since XLogCtlData contains XLogRecPtr fields, its sizeof should be
* a multiple of the alignment for same, so no extra alignment padding
* is needed here.
*/
XLogCtl->xlblocks = (XLogRecPtr *)
(((char *) XLogCtl) + sizeof(XLogCtlData));
memset(XLogCtl->xlblocks, 0, sizeof(XLogRecPtr) * XLOGbuffers);
/*
* Here, on the other hand, we must MAXALIGN to ensure the page
* buffers have worst-case alignment.
*/
XLogCtl->pages =
((char *) XLogCtl) + MAXALIGN(sizeof(XLogCtlData) +
sizeof(XLogRecPtr) * XLOGbuffers);
memset(XLogCtl->pages, 0, BLCKSZ * XLOGbuffers);
/*
* Do basic initialization of XLogCtl shared data. (StartupXLOG will
* fill in additional info.)
*/
XLogCtl->XLogCacheByte = BLCKSZ * XLOGbuffers;
XLogCtl->XLogCacheBlck = XLOGbuffers - 1;
XLogCtl->Insert.currpage = (XLogPageHeader) (XLogCtl->pages);
SpinLockInit(&XLogCtl->info_lck);
/*
* If we are not in bootstrap mode, pg_control should already exist.
* Read and validate it immediately (see comments in ReadControlFile()
* for the reasons why).
*/
if (!IsBootstrapProcessingMode())
ReadControlFile();
}
/*
* This func must be called ONCE on system install. It creates pg_control
* and the initial XLOG segment.
*/
void
BootStrapXLOG(void)
{
CheckPoint checkPoint;
char *buffer;
XLogPageHeader page;
XLogRecord *record;
bool use_existent;
crc64 crc;
/* Use malloc() to ensure buffer is MAXALIGNED */
buffer = (char *) malloc(BLCKSZ);
page = (XLogPageHeader) buffer;
checkPoint.redo.xlogid = 0;
checkPoint.redo.xrecoff = SizeOfXLogPHD;
checkPoint.undo = checkPoint.redo;
checkPoint.ThisStartUpID = 0;
checkPoint.nextXid = FirstNormalTransactionId;
checkPoint.nextOid = BootstrapObjectIdData;
checkPoint.time = time(NULL);
ShmemVariableCache->nextXid = checkPoint.nextXid;
ShmemVariableCache->nextOid = checkPoint.nextOid;
ShmemVariableCache->oidCount = 0;
memset(buffer, 0, BLCKSZ);
page->xlp_magic = XLOG_PAGE_MAGIC;
page->xlp_info = 0;
page->xlp_sui = checkPoint.ThisStartUpID;
page->xlp_pageaddr.xlogid = 0;
page->xlp_pageaddr.xrecoff = 0;
record = (XLogRecord *) ((char *) page + SizeOfXLogPHD);
record->xl_prev.xlogid = 0;
record->xl_prev.xrecoff = 0;
record->xl_xact_prev = record->xl_prev;
record->xl_xid = InvalidTransactionId;
record->xl_len = sizeof(checkPoint);
record->xl_info = XLOG_CHECKPOINT_SHUTDOWN;
record->xl_rmid = RM_XLOG_ID;
memcpy(XLogRecGetData(record), &checkPoint, sizeof(checkPoint));
INIT_CRC64(crc);
COMP_CRC64(crc, &checkPoint, sizeof(checkPoint));
COMP_CRC64(crc, (char *) record + sizeof(crc64),
SizeOfXLogRecord - sizeof(crc64));
FIN_CRC64(crc);
record->xl_crc = crc;
use_existent = false;
openLogFile = XLogFileInit(0, 0, &use_existent, false);
errno = 0;
if (write(openLogFile, buffer, BLCKSZ) != BLCKSZ)
{
/* if write didn't set errno, assume problem is no disk space */
if (errno == 0)
errno = ENOSPC;
elog(STOP, "BootStrapXLOG failed to write log file: %m");
}
if (pg_fsync(openLogFile) != 0)
elog(STOP, "BootStrapXLOG failed to fsync log file: %m");
close(openLogFile);
openLogFile = -1;
memset(ControlFile, 0, sizeof(ControlFileData));
/* Initialize pg_control status fields */
ControlFile->state = DB_SHUTDOWNED;
ControlFile->time = checkPoint.time;
ControlFile->logId = 0;
ControlFile->logSeg = 1;
ControlFile->checkPoint = checkPoint.redo;
ControlFile->checkPointCopy = checkPoint;
/* some additional ControlFile fields are set in WriteControlFile() */
WriteControlFile();
/* Bootstrap the commit log, too */
BootStrapCLOG();
}
static char *
str_time(time_t tnow)
{
static char buf[32];
strftime(buf, sizeof(buf),
"%Y-%m-%d %H:%M:%S %Z",
localtime(&tnow));
return buf;
}
/*
* This must be called ONCE during postmaster or standalone-backend startup
*/
void
StartupXLOG(void)
{
XLogCtlInsert *Insert;
CheckPoint checkPoint;
bool wasShutdown;
XLogRecPtr RecPtr,
LastRec,
checkPointLoc,
EndOfLog;
XLogRecord *record;
char *buffer;
/* Use malloc() to ensure record buffer is MAXALIGNED */
buffer = (char *) malloc(_INTL_MAXLOGRECSZ);
CritSectionCount++;
/*
* Read control file and check XLOG status looks valid.
*
* Note: in most control paths, *ControlFile is already valid and we need
* not do ReadControlFile() here, but might as well do it to be sure.
*/
ReadControlFile();
if (ControlFile->logSeg == 0 ||
ControlFile->state < DB_SHUTDOWNED ||
ControlFile->state > DB_IN_PRODUCTION ||
!XRecOffIsValid(ControlFile->checkPoint.xrecoff))
elog(STOP, "control file context is broken");
if (ControlFile->state == DB_SHUTDOWNED)
elog(LOG, "database system was shut down at %s",
str_time(ControlFile->time));
else if (ControlFile->state == DB_SHUTDOWNING)
elog(LOG, "database system shutdown was interrupted at %s",
str_time(ControlFile->time));
else if (ControlFile->state == DB_IN_RECOVERY)
elog(LOG, "database system was interrupted being in recovery at %s\n"
"\tThis probably means that some data blocks are corrupted\n"
"\tand you will have to use the last backup for recovery.",
str_time(ControlFile->time));
else if (ControlFile->state == DB_IN_PRODUCTION)
elog(LOG, "database system was interrupted at %s",
str_time(ControlFile->time));
/*
* Get the last valid checkpoint record. If the latest one according
* to pg_control is broken, try the next-to-last one.
*/
record = ReadCheckpointRecord(ControlFile->checkPoint, 1, buffer);
if (record != NULL)
{
checkPointLoc = ControlFile->checkPoint;
elog(LOG, "checkpoint record is at %X/%X",
checkPointLoc.xlogid, checkPointLoc.xrecoff);
}
else
{
record = ReadCheckpointRecord(ControlFile->prevCheckPoint, 2, buffer);
if (record != NULL)
{
checkPointLoc = ControlFile->prevCheckPoint;
elog(LOG, "using previous checkpoint record at %X/%X",
checkPointLoc.xlogid, checkPointLoc.xrecoff);
InRecovery = true; /* force recovery even if SHUTDOWNED */
}
else
elog(STOP, "unable to locate a valid checkpoint record");
}
LastRec = RecPtr = checkPointLoc;
memcpy(&checkPoint, XLogRecGetData(record), sizeof(CheckPoint));
wasShutdown = (record->xl_info == XLOG_CHECKPOINT_SHUTDOWN);
elog(LOG, "redo record is at %X/%X; undo record is at %X/%X; shutdown %s",
checkPoint.redo.xlogid, checkPoint.redo.xrecoff,
checkPoint.undo.xlogid, checkPoint.undo.xrecoff,
wasShutdown ? "TRUE" : "FALSE");
elog(LOG, "next transaction id: %u; next oid: %u",
checkPoint.nextXid, checkPoint.nextOid);
if (!TransactionIdIsNormal(checkPoint.nextXid))
elog(STOP, "invalid next transaction id");
ShmemVariableCache->nextXid = checkPoint.nextXid;
ShmemVariableCache->nextOid = checkPoint.nextOid;
ShmemVariableCache->oidCount = 0;
ThisStartUpID = checkPoint.ThisStartUpID;
RedoRecPtr = XLogCtl->Insert.RedoRecPtr =
XLogCtl->RedoRecPtr = checkPoint.redo;
if (XLByteLT(RecPtr, checkPoint.redo))
elog(STOP, "invalid redo in checkpoint record");
if (checkPoint.undo.xrecoff == 0)
checkPoint.undo = RecPtr;
if (XLByteLT(checkPoint.undo, RecPtr) ||
XLByteLT(checkPoint.redo, RecPtr))
{
if (wasShutdown)
elog(STOP, "invalid redo/undo record in shutdown checkpoint");
InRecovery = true;
}
else if (ControlFile->state != DB_SHUTDOWNED)
InRecovery = true;
/* REDO */
if (InRecovery)
{
elog(LOG, "database system was not properly shut down; "
"automatic recovery in progress");
ControlFile->state = DB_IN_RECOVERY;
ControlFile->time = time(NULL);
UpdateControlFile();
XLogInitRelationCache();
/* Is REDO required ? */
if (XLByteLT(checkPoint.redo, RecPtr))
record = ReadRecord(&(checkPoint.redo), STOP, buffer);
else
{
/* read past CheckPoint record */
record = ReadRecord(NULL, LOG, buffer);
}
if (record != NULL)
{
InRedo = true;
elog(LOG, "redo starts at %X/%X",
ReadRecPtr.xlogid, ReadRecPtr.xrecoff);
do
{
/* nextXid must be beyond record's xid */
if (TransactionIdFollowsOrEquals(record->xl_xid,
ShmemVariableCache->nextXid))
{
ShmemVariableCache->nextXid = record->xl_xid;
TransactionIdAdvance(ShmemVariableCache->nextXid);
}
if (XLOG_DEBUG)
{
char buf[8192];
sprintf(buf, "REDO @ %X/%X; LSN %X/%X: ",
ReadRecPtr.xlogid, ReadRecPtr.xrecoff,
EndRecPtr.xlogid, EndRecPtr.xrecoff);
xlog_outrec(buf, record);
strcat(buf, " - ");
RmgrTable[record->xl_rmid].rm_desc(buf,
record->xl_info, XLogRecGetData(record));
elog(DEBUG, "%s", buf);
}
if (record->xl_info & XLR_BKP_BLOCK_MASK)
RestoreBkpBlocks(record, EndRecPtr);
RmgrTable[record->xl_rmid].rm_redo(EndRecPtr, record);
record = ReadRecord(NULL, LOG, buffer);
} while (record != NULL);
elog(LOG, "redo done at %X/%X",
ReadRecPtr.xlogid, ReadRecPtr.xrecoff);
LastRec = ReadRecPtr;
InRedo = false;
}
else
elog(LOG, "redo is not required");
}
/*
* Init xlog buffer cache using the block containing the last valid
* record from the previous incarnation.
*/
record = ReadRecord(&LastRec, STOP, buffer);
EndOfLog = EndRecPtr;
XLByteToPrevSeg(EndOfLog, openLogId, openLogSeg);
openLogFile = XLogFileOpen(openLogId, openLogSeg, false);
openLogOff = 0;
ControlFile->logId = openLogId;
ControlFile->logSeg = openLogSeg + 1;
Insert = &XLogCtl->Insert;
Insert->PrevRecord = LastRec;
/*
* If the next record will go to the new page then initialize for that
* one.
*/
if ((BLCKSZ - EndOfLog.xrecoff % BLCKSZ) < SizeOfXLogRecord)
EndOfLog.xrecoff += (BLCKSZ - EndOfLog.xrecoff % BLCKSZ);
if (EndOfLog.xrecoff % BLCKSZ == 0)
{
XLogRecPtr NewPageEndPtr;
NewPageEndPtr = EndOfLog;
if (NewPageEndPtr.xrecoff >= XLogFileSize)
{
/* crossing a logid boundary */
NewPageEndPtr.xlogid += 1;
NewPageEndPtr.xrecoff = BLCKSZ;
}
else
NewPageEndPtr.xrecoff += BLCKSZ;
XLogCtl->xlblocks[0] = NewPageEndPtr;
Insert->currpage->xlp_magic = XLOG_PAGE_MAGIC;
if (InRecovery)
Insert->currpage->xlp_sui = ThisStartUpID;
else
Insert->currpage->xlp_sui = ThisStartUpID + 1;
Insert->currpage->xlp_pageaddr.xlogid = NewPageEndPtr.xlogid;
Insert->currpage->xlp_pageaddr.xrecoff = NewPageEndPtr.xrecoff - BLCKSZ;
/* rest of buffer was zeroed in XLOGShmemInit */
Insert->currpos = (char *) Insert->currpage + SizeOfXLogPHD;
}
else
{
XLogCtl->xlblocks[0].xlogid = openLogId;
XLogCtl->xlblocks[0].xrecoff =
((EndOfLog.xrecoff - 1) / BLCKSZ + 1) * BLCKSZ;
/*
* Tricky point here: readBuf contains the *last* block that the
* LastRec record spans, not the one it starts in. The last block
* is indeed the one we want to use.
*/
Assert(readOff == (XLogCtl->xlblocks[0].xrecoff - BLCKSZ) % XLogSegSize);
memcpy((char *) Insert->currpage, readBuf, BLCKSZ);
Insert->currpos = (char *) Insert->currpage +
(EndOfLog.xrecoff + BLCKSZ - XLogCtl->xlblocks[0].xrecoff);
/* Make sure rest of page is zero */
memset(Insert->currpos, 0, INSERT_FREESPACE(Insert));
}
LogwrtResult.Write = LogwrtResult.Flush = EndOfLog;
XLogCtl->Write.LogwrtResult = LogwrtResult;
Insert->LogwrtResult = LogwrtResult;
XLogCtl->LogwrtResult = LogwrtResult;
XLogCtl->LogwrtRqst.Write = EndOfLog;
XLogCtl->LogwrtRqst.Flush = EndOfLog;
#ifdef NOT_USED
/* UNDO */
if (InRecovery)
{
RecPtr = ReadRecPtr;
if (XLByteLT(checkPoint.undo, RecPtr))
{
elog(LOG, "undo starts at %X/%X",
RecPtr.xlogid, RecPtr.xrecoff);
do
{
record = ReadRecord(&RecPtr, STOP, buffer);
if (TransactionIdIsValid(record->xl_xid) &&
!TransactionIdDidCommit(record->xl_xid))
RmgrTable[record->xl_rmid].rm_undo(EndRecPtr, record);
RecPtr = record->xl_prev;
} while (XLByteLE(checkPoint.undo, RecPtr));
elog(LOG, "undo done at %X/%X",
ReadRecPtr.xlogid, ReadRecPtr.xrecoff);
}
else
elog(LOG, "undo is not required");
}
#endif
if (InRecovery)
{
/*
* In case we had to use the secondary checkpoint, make sure that
* it will still be shown as the secondary checkpoint after this
* CreateCheckPoint operation; we don't want the broken primary
* checkpoint to become prevCheckPoint...
*/
ControlFile->checkPoint = checkPointLoc;
CreateCheckPoint(true);
XLogCloseRelationCache();
}
/*
* Preallocate additional log files, if wanted.
*/
PreallocXlogFiles(EndOfLog);
InRecovery = false;
ControlFile->state = DB_IN_PRODUCTION;
ControlFile->time = time(NULL);
UpdateControlFile();
ThisStartUpID++;
XLogCtl->ThisStartUpID = ThisStartUpID;
/* Start up the commit log, too */
StartupCLOG();
elog(LOG, "database system is ready");
CritSectionCount--;
/* Shut down readFile facility, free space */
if (readFile >= 0)
{
close(readFile);
readFile = -1;
}
if (readBuf)
{
free(readBuf);
readBuf = NULL;
}
free(buffer);
}
/*
* Subroutine to try to fetch and validate a prior checkpoint record.
* whichChkpt = 1 for "primary", 2 for "secondary", merely informative
*/
static XLogRecord *
ReadCheckpointRecord(XLogRecPtr RecPtr,
int whichChkpt,
char *buffer)
{
XLogRecord *record;
if (!XRecOffIsValid(RecPtr.xrecoff))
{
elog(LOG, (whichChkpt == 1 ?
"invalid primary checkpoint link in control file" :
"invalid secondary checkpoint link in control file"));
return NULL;
}
record = ReadRecord(&RecPtr, LOG, buffer);
if (record == NULL)
{
elog(LOG, (whichChkpt == 1 ?
"invalid primary checkpoint record" :
"invalid secondary checkpoint record"));
return NULL;
}
if (record->xl_rmid != RM_XLOG_ID)
{
elog(LOG, (whichChkpt == 1 ?
"invalid resource manager id in primary checkpoint record" :
"invalid resource manager id in secondary checkpoint record"));
return NULL;
}
if (record->xl_info != XLOG_CHECKPOINT_SHUTDOWN &&
record->xl_info != XLOG_CHECKPOINT_ONLINE)
{
elog(LOG, (whichChkpt == 1 ?
"invalid xl_info in primary checkpoint record" :
"invalid xl_info in secondary checkpoint record"));
return NULL;
}
if (record->xl_len != sizeof(CheckPoint))
{
elog(LOG, (whichChkpt == 1 ?
"invalid length of primary checkpoint record" :
"invalid length of secondary checkpoint record"));
return NULL;
}
return record;
}
/*
* Postmaster uses this to initialize ThisStartUpID & RedoRecPtr from
* XLogCtlData located in shmem after successful startup.
*/
void
SetThisStartUpID(void)
{
ThisStartUpID = XLogCtl->ThisStartUpID;
RedoRecPtr = XLogCtl->RedoRecPtr;
}
/*
* CheckPoint process called by postmaster saves copy of new RedoRecPtr
* in shmem (using SetRedoRecPtr). When checkpointer completes, postmaster
* calls GetRedoRecPtr to update its own copy of RedoRecPtr, so that
* subsequently-spawned backends will start out with a reasonably up-to-date
* local RedoRecPtr. Since these operations are not protected by any lock
* and copying an XLogRecPtr isn't atomic, it's unsafe to use either of these
* routines at other times!
*
* Note: once spawned, a backend must update its local RedoRecPtr from
* XLogCtl->Insert.RedoRecPtr while holding the insert lock. This is
* done in XLogInsert().
*/
void
SetRedoRecPtr(void)
{
XLogCtl->RedoRecPtr = RedoRecPtr;
}
void
GetRedoRecPtr(void)
{
RedoRecPtr = XLogCtl->RedoRecPtr;
}
/*
* This must be called ONCE during postmaster or standalone-backend shutdown
*/
void
ShutdownXLOG(void)
{
elog(LOG, "shutting down");
/* suppress in-transaction check in CreateCheckPoint */
MyLastRecPtr.xrecoff = 0;
CritSectionCount++;
CreateDummyCaches();
CreateCheckPoint(true);
ShutdownCLOG();
CritSectionCount--;
elog(LOG, "database system is shut down");
}
/*
* Perform a checkpoint --- either during shutdown, or on-the-fly
*/
void
CreateCheckPoint(bool shutdown)
{
CheckPoint checkPoint;
XLogRecPtr recptr;
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogRecData rdata;
uint32 freespace;
uint32 _logId;
uint32 _logSeg;
if (MyLastRecPtr.xrecoff != 0)
elog(ERROR, "CreateCheckPoint: cannot be called inside transaction block");
/*
* The CheckpointLock can be held for quite a while, which is not good
* because we won't respond to a cancel/die request while waiting for
* an LWLock. (But the alternative of using a regular lock won't work
* for background checkpoint processes, which are not regular
* backends.) So, rather than use a plain LWLockAcquire, use this
* kluge to allow an interrupt to be accepted while we are waiting:
*/
while (!LWLockConditionalAcquire(CheckpointLock, LW_EXCLUSIVE))
{
CHECK_FOR_INTERRUPTS();
sleep(1);
}
START_CRIT_SECTION();
if (shutdown)
{
ControlFile->state = DB_SHUTDOWNING;
ControlFile->time = time(NULL);
UpdateControlFile();
}
memset(&checkPoint, 0, sizeof(checkPoint));
checkPoint.ThisStartUpID = ThisStartUpID;
checkPoint.time = time(NULL);
LWLockAcquire(WALInsertLock, LW_EXCLUSIVE);
/*
* If this isn't a shutdown, and we have not inserted any XLOG records
* since the start of the last checkpoint, skip the checkpoint. The
* idea here is to avoid inserting duplicate checkpoints when the
* system is idle. That wastes log space, and more importantly it
* exposes us to possible loss of both current and previous checkpoint
* records if the machine crashes just as we're writing the update.
* (Perhaps it'd make even more sense to checkpoint only when the
* previous checkpoint record is in a different xlog page?)
*
* We have to make two tests to determine that nothing has happened since
* the start of the last checkpoint: current insertion point must
* match the end of the last checkpoint record, and its redo pointer
* must point to itself.
*/
if (!shutdown)
{
XLogRecPtr curInsert;
INSERT_RECPTR(curInsert, Insert, Insert->curridx);
if (curInsert.xlogid == ControlFile->checkPoint.xlogid &&
curInsert.xrecoff == ControlFile->checkPoint.xrecoff +
MAXALIGN(SizeOfXLogRecord + sizeof(CheckPoint)) &&
ControlFile->checkPoint.xlogid ==
ControlFile->checkPointCopy.redo.xlogid &&
ControlFile->checkPoint.xrecoff ==
ControlFile->checkPointCopy.redo.xrecoff)
{
LWLockRelease(WALInsertLock);
LWLockRelease(CheckpointLock);
END_CRIT_SECTION();
return;
}
}
/*
* Compute new REDO record ptr = location of next XLOG record.
*
* NB: this is NOT necessarily where the checkpoint record itself will
* be, since other backends may insert more XLOG records while we're
* off doing the buffer flush work. Those XLOG records are logically
* after the checkpoint, even though physically before it. Got that?
*/
freespace = INSERT_FREESPACE(Insert);
if (freespace < SizeOfXLogRecord)
{
(void) AdvanceXLInsertBuffer();
/* OK to ignore update return flag, since we will do flush anyway */
freespace = BLCKSZ - SizeOfXLogPHD;
}
INSERT_RECPTR(checkPoint.redo, Insert, Insert->curridx);
/*
* Here we update the shared RedoRecPtr for future XLogInsert calls;
* this must be done while holding the insert lock.
*/
RedoRecPtr = XLogCtl->Insert.RedoRecPtr = checkPoint.redo;
/*
* Get UNDO record ptr - this is oldest of PROC->logRec values. We do
* this while holding insert lock to ensure that we won't miss any
* about-to-commit transactions (UNDO must include all xacts that have
* commits after REDO point).
*
* XXX temporarily ifdef'd out to avoid three-way deadlock condition:
* GetUndoRecPtr needs to grab SInvalLock to ensure that it is looking
* at a stable set of proc records, but grabbing SInvalLock while holding
* WALInsertLock is no good. GetNewTransactionId may cause a WAL record
* to be written while holding XidGenLock, and GetSnapshotData needs to
* get XidGenLock while holding SInvalLock, so there's a risk of deadlock.
* Need to find a better solution. See pgsql-hackers discussion of
* 17-Dec-01.
*/
#ifdef NOT_USED
checkPoint.undo = GetUndoRecPtr();
if (shutdown && checkPoint.undo.xrecoff != 0)
elog(STOP, "active transaction while database system is shutting down");
#endif
/*
* Now we can release insert lock, allowing other xacts to proceed
* even while we are flushing disk buffers.
*/
LWLockRelease(WALInsertLock);
LWLockAcquire(XidGenLock, LW_SHARED);
checkPoint.nextXid = ShmemVariableCache->nextXid;
LWLockRelease(XidGenLock);
LWLockAcquire(OidGenLock, LW_SHARED);
checkPoint.nextOid = ShmemVariableCache->nextOid;
if (!shutdown)
checkPoint.nextOid += ShmemVariableCache->oidCount;
LWLockRelease(OidGenLock);
/*
* Having constructed the checkpoint record, ensure all shmem disk
* buffers are flushed to disk.
*/
FlushBufferPool();
/* And commit-log buffers, too */
CheckPointCLOG();
/*
* Now insert the checkpoint record into XLOG.
*/
rdata.buffer = InvalidBuffer;
rdata.data = (char *) (&checkPoint);
rdata.len = sizeof(checkPoint);
rdata.next = NULL;
recptr = XLogInsert(RM_XLOG_ID,
shutdown ? XLOG_CHECKPOINT_SHUTDOWN :
XLOG_CHECKPOINT_ONLINE,
&rdata);
XLogFlush(recptr);
/*
* We now have ProcLastRecPtr = start of actual checkpoint record,
* recptr = end of actual checkpoint record.
*/
if (shutdown && !XLByteEQ(checkPoint.redo, ProcLastRecPtr))
elog(STOP, "concurrent transaction log activity while database system is shutting down");
/*
* Select point at which we can truncate the log, which we base on the
* prior checkpoint's earliest info.
*
* With UNDO support: oldest item is redo or undo, whichever is older;
* but watch out for case that undo = 0.
*
* Without UNDO support: just use the redo pointer. This allows xlog
* space to be freed much faster when there are long-running
* transactions.
*/
#ifdef NOT_USED
if (ControlFile->checkPointCopy.undo.xrecoff != 0 &&
XLByteLT(ControlFile->checkPointCopy.undo,
ControlFile->checkPointCopy.redo))
XLByteToSeg(ControlFile->checkPointCopy.undo, _logId, _logSeg);
else
#endif
XLByteToSeg(ControlFile->checkPointCopy.redo, _logId, _logSeg);
/*
* Update the control file.
*/
LWLockAcquire(ControlFileLock, LW_EXCLUSIVE);
if (shutdown)
ControlFile->state = DB_SHUTDOWNED;
ControlFile->prevCheckPoint = ControlFile->checkPoint;
ControlFile->checkPoint = ProcLastRecPtr;
ControlFile->checkPointCopy = checkPoint;
ControlFile->time = time(NULL);
UpdateControlFile();
LWLockRelease(ControlFileLock);
/*
* Delete offline log files (those no longer needed even for previous
* checkpoint).
*/
if (_logId || _logSeg)
{
PrevLogSeg(_logId, _logSeg);
MoveOfflineLogs(_logId, _logSeg, recptr);
}
/*
* Make more log segments if needed. (Do this after deleting offline
* log segments, to avoid having peak disk space usage higher than
* necessary.)
*/
if (!shutdown)
PreallocXlogFiles(recptr);
LWLockRelease(CheckpointLock);
END_CRIT_SECTION();
}
/*
* Write a NEXTOID log record
*/
void
XLogPutNextOid(Oid nextOid)
{
XLogRecData rdata;
rdata.buffer = InvalidBuffer;
rdata.data = (char *) (&nextOid);
rdata.len = sizeof(Oid);
rdata.next = NULL;
(void) XLogInsert(RM_XLOG_ID, XLOG_NEXTOID, &rdata);
}
/*
* XLOG resource manager's routines
*/
void
xlog_redo(XLogRecPtr lsn, XLogRecord *record)
{
uint8 info = record->xl_info & ~XLR_INFO_MASK;
if (info == XLOG_NEXTOID)
{
Oid nextOid;
memcpy(&nextOid, XLogRecGetData(record), sizeof(Oid));
if (ShmemVariableCache->nextOid < nextOid)
{
ShmemVariableCache->nextOid = nextOid;
ShmemVariableCache->oidCount = 0;
}
}
else if (info == XLOG_CHECKPOINT_SHUTDOWN)
{
CheckPoint checkPoint;
memcpy(&checkPoint, XLogRecGetData(record), sizeof(CheckPoint));
/* In a SHUTDOWN checkpoint, believe the counters exactly */
ShmemVariableCache->nextXid = checkPoint.nextXid;
ShmemVariableCache->nextOid = checkPoint.nextOid;
ShmemVariableCache->oidCount = 0;
}
else if (info == XLOG_CHECKPOINT_ONLINE)
{
CheckPoint checkPoint;
memcpy(&checkPoint, XLogRecGetData(record), sizeof(CheckPoint));
/* In an ONLINE checkpoint, treat the counters like NEXTOID */
if (TransactionIdPrecedes(ShmemVariableCache->nextXid,
checkPoint.nextXid))
ShmemVariableCache->nextXid = checkPoint.nextXid;
if (ShmemVariableCache->nextOid < checkPoint.nextOid)
{
ShmemVariableCache->nextOid = checkPoint.nextOid;
ShmemVariableCache->oidCount = 0;
}
}
}
void
xlog_undo(XLogRecPtr lsn, XLogRecord *record)
{
}
void
xlog_desc(char *buf, uint8 xl_info, char *rec)
{
uint8 info = xl_info & ~XLR_INFO_MASK;
if (info == XLOG_CHECKPOINT_SHUTDOWN ||
info == XLOG_CHECKPOINT_ONLINE)
{
CheckPoint *checkpoint = (CheckPoint *) rec;
sprintf(buf + strlen(buf), "checkpoint: redo %X/%X; undo %X/%X; "
"sui %u; xid %u; oid %u; %s",
checkpoint->redo.xlogid, checkpoint->redo.xrecoff,
checkpoint->undo.xlogid, checkpoint->undo.xrecoff,
checkpoint->ThisStartUpID, checkpoint->nextXid,
checkpoint->nextOid,
(info == XLOG_CHECKPOINT_SHUTDOWN) ? "shutdown" : "online");
}
else if (info == XLOG_NEXTOID)
{
Oid nextOid;
memcpy(&nextOid, rec, sizeof(Oid));
sprintf(buf + strlen(buf), "nextOid: %u", nextOid);
}
else
strcat(buf, "UNKNOWN");
}
static void
xlog_outrec(char *buf, XLogRecord *record)
{
int bkpb;
int i;
sprintf(buf + strlen(buf), "prev %X/%X; xprev %X/%X; xid %u",
record->xl_prev.xlogid, record->xl_prev.xrecoff,
record->xl_xact_prev.xlogid, record->xl_xact_prev.xrecoff,
record->xl_xid);
for (i = 0, bkpb = 0; i < XLR_MAX_BKP_BLOCKS; i++)
{
if (!(record->xl_info & (XLR_SET_BKP_BLOCK(i))))
continue;
bkpb++;
}
if (bkpb)
sprintf(buf + strlen(buf), "; bkpb %d", bkpb);
sprintf(buf + strlen(buf), ": %s",
RmgrTable[record->xl_rmid].rm_name);
}
/*
* GUC support routines
*/
bool
check_xlog_sync_method(const char *method)
{
if (strcasecmp(method, "fsync") == 0)
return true;
#ifdef HAVE_FDATASYNC
if (strcasecmp(method, "fdatasync") == 0)
return true;
#endif
#ifdef OPEN_SYNC_FLAG
if (strcasecmp(method, "open_sync") == 0)
return true;
#endif
#ifdef OPEN_DATASYNC_FLAG
if (strcasecmp(method, "open_datasync") == 0)
return true;
#endif
return false;
}
void
assign_xlog_sync_method(const char *method)
{
int new_sync_method;
int new_sync_bit;
if (strcasecmp(method, "fsync") == 0)
{
new_sync_method = SYNC_METHOD_FSYNC;
new_sync_bit = 0;
}
#ifdef HAVE_FDATASYNC
else if (strcasecmp(method, "fdatasync") == 0)
{
new_sync_method = SYNC_METHOD_FDATASYNC;
new_sync_bit = 0;
}
#endif
#ifdef OPEN_SYNC_FLAG
else if (strcasecmp(method, "open_sync") == 0)
{
new_sync_method = SYNC_METHOD_OPEN;
new_sync_bit = OPEN_SYNC_FLAG;
}
#endif
#ifdef OPEN_DATASYNC_FLAG
else if (strcasecmp(method, "open_datasync") == 0)
{
new_sync_method = SYNC_METHOD_OPEN;
new_sync_bit = OPEN_DATASYNC_FLAG;
}
#endif
else
{
/* Can't get here unless guc.c screwed up */
elog(ERROR, "bogus wal_sync_method %s", method);
new_sync_method = 0; /* keep compiler quiet */
new_sync_bit = 0;
}
if (sync_method != new_sync_method || open_sync_bit != new_sync_bit)
{
/*
* To ensure that no blocks escape unsynced, force an fsync on the
* currently open log segment (if any). Also, if the open flag is
* changing, close the log file so it will be reopened (with new
* flag bit) at next use.
*/
if (openLogFile >= 0)
{
if (pg_fsync(openLogFile) != 0)
elog(STOP, "fsync of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
if (open_sync_bit != new_sync_bit)
{
if (close(openLogFile) != 0)
elog(STOP, "close of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
openLogFile = -1;
}
}
sync_method = new_sync_method;
open_sync_bit = new_sync_bit;
}
}
/*
* Issue appropriate kind of fsync (if any) on the current XLOG output file
*/
static void
issue_xlog_fsync(void)
{
switch (sync_method)
{
case SYNC_METHOD_FSYNC:
if (pg_fsync(openLogFile) != 0)
elog(STOP, "fsync of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
break;
#ifdef HAVE_FDATASYNC
case SYNC_METHOD_FDATASYNC:
if (pg_fdatasync(openLogFile) != 0)
elog(STOP, "fdatasync of log file %u, segment %u failed: %m",
openLogId, openLogSeg);
break;
#endif
case SYNC_METHOD_OPEN:
/* write synced it already */
break;
default:
elog(STOP, "bogus wal_sync_method %d", sync_method);
break;
}
}
pgsql-patches by date: