Re: most bang for buck with ~ $20,000 - Mailing list pgsql-performance

I have unlimited rack space, so 2U is not the issue. The boxes are stored in
our lab for internal software tools.  I'm going to research those boxes you
mention.  Regarding the JBOD enclosures, are these generally just 2U or 4U
units with SCSI interface connectors?  I didn't see these types of boxes
availble on Dell website, I'll look again.
-Kenji

On Wed, Aug 09, 2006 at 07:35:22AM +0200, Arjen van der Meijden wrote:
> With such a budget you should easily be able to get something like:
> - A 1U high-performance server (for instance the Dell 1950 with 2x
> Woodcrest 5160, 16GB of FB-Dimm memory, one 5i and one 5e perc raid
> controller and some disks internally)
> - An external SAS direct attached disks storage enclosure full with 15k
> rpm 36GB disks (for instance the MD1000, with 15x 36GB 15k disks)
>
> Going for the dell-solution would set you back "only" (including
> savings) about $13-$14k. HP offers a similar solutions (a HP DL360G5 or
> a DL380G5/DL385 with two MSA50's for instance) which also fit in your
> budget afaik. The other players tend to be (a bit) more expensive, force
> you to go with Fibre Channel or "ancient" SCSI external storage ;)
>
> If you'd like to have a product by a generic vendor, have a look at the
> Adaptec JS50 SAS Jbod enclosure or Promise's Vtrak 300 (both offer 12
> sas/sata bays in 2U) for storage.
>
> If you're limited to only 2U of rack space, its a bit more difficult to
> get maximum I/O in your budget (you have basically space for about 8 or
> 12 3.5" disks (with generic suppliers) or 16 2.5" sff disks (with HP)).
> But you should still be able to have two top-off-the-line x86 cpu's (amd
> opteron 285 or intel woorcrest 5160) and 16GB of memory (even FB Dimm,
> which is pretty expensive).
>
> Best regards,
>
> Arjen van der Meijden
>
>
> On 8-8-2006 22:43, Kenji Morishige wrote:
> >I've asked for some help here a few months ago and got some really helpfull
> >answers regarding RAID controllers and server configuration.  Up until
> >recently I've been running PostgreSQL on a two year old Dual Xeon 3.06Ghz
> >machine with a single channel RAID controller (previously Adaptec 2200S,
> >but
> >now changed to LSI MegaRAID). The 2U unit is from a generic vendor using
> >what
> >I believe is a SuperMicro motherboard.  In the last week after upgrading
> >the
> >RAID controller, the machine has had disk failure and some other issues. I
> >would like to build a very reliable dedicated postgreSQL server that has
> >the
> >ultimate possible performance and reliabily for around $20,000.  The data
> >set
> >size is only currently about 4GB, but is increasing by approximately 50MB
> >daily.  The server also requires about 500 connections and I have been
> >monitoring about 100-200 queries per second at the moment.  I am planning
> >to
> >run FreeBSD 6.1 if possible, but I am open to any other suggestions if it
> >improves performance.
> >
> >I am considering a setup such as this:
> >  - At least dual cpu (possibly with 2 cores each)
> >  - 4GB of RAM
> >  - 2 disk RAID 1 array for root disk
> >  - 4 disk RAID 1+0 array for PGDATA
> >  - 2 disk RAID 1 array for pg_xlog
> >
> >Does anyone know a vendor that might be able provide such setup?  Any
> >critique in this design? I'm thinking having a 2 channel RAID controller to
> >seperate the PGDATA, root and pg_xlog.
> >
> >Sincerely,
> >Kenji
> >
> >---------------------------(end of broadcast)---------------------------
> >TIP 2: Don't 'kill -9' the postmaster
> >