arm rc1 regression failures - Mailing list pgsql-hackers

Just compiled RC1 on a netwinder ARM system running Debian Linux (sarge).  All tests passed except "point" with the 
following in results/point

Jim

--
-- POINT
--
CREATE TABLE POINT_TBL(f1 point);
INSERT INTO POINT_TBL(f1) VALUES ('(0.0,0.0)');
INSERT INTO POINT_TBL(f1) VALUES ('(-10.0,0.0)');
INSERT INTO POINT_TBL(f1) VALUES ('(-3.0,4.0)');
INSERT INTO POINT_TBL(f1) VALUES ('(5.1, 34.5)');
INSERT INTO POINT_TBL(f1) VALUES ('(-5.0,-12.0)');
-- bad format points 
INSERT INTO POINT_TBL(f1) VALUES ('asdfasdf');
ERROR:  invalid input syntax for type point: "asdfasdf"
INSERT INTO POINT_TBL(f1) VALUES ('10.0,10.0');
INSERT INTO POINT_TBL(f1) VALUES ('(10.0 10.0)');
ERROR:  invalid input syntax for type point: "(10.0 10.0)"
INSERT INTO POINT_TBL(f1) VALUES ('(10.0,10.0');
ERROR:  invalid input syntax for type point: "(10.0,10.0"
SELECT '' AS six, POINT_TBL.*;six |     f1     
-----+------------    | (0,0)    | (-10,0)    | (-3,4)    | (5.1,34.5)    | (-5,-12)    | (10,10)
(6 rows)

-- left of 
SELECT '' AS three, p.* FROM POINT_TBL p WHERE p.f1 << '(0.0, 0.0)';three |    f1    
-------+----------      | (-10,0)      | (-3,4)      | (-5,-12)
(3 rows)

-- right of 
SELECT '' AS three, p.* FROM POINT_TBL p WHERE '(0.0,0.0)' >> p.f1;three |    f1    
-------+----------      | (-10,0)      | (-3,4)      | (-5,-12)
(3 rows)

-- above 
SELECT '' AS one, p.* FROM POINT_TBL p WHERE '(0.0,0.0)' >^ p.f1;one |    f1    
-----+----------    | (-5,-12)
(1 row)

-- below 
SELECT '' AS one, p.* FROM POINT_TBL p WHERE p.f1 <^ '(0.0, 0.0)';one |    f1    
-----+----------    | (-5,-12)
(1 row)

-- equal 
SELECT '' AS one, p.* FROM POINT_TBL p WHERE p.f1 ~= '(5.1, 34.5)';one |     f1     
-----+------------    | (5.1,34.5)
(1 row)

-- point in box 
SELECT '' AS three, p.* FROM POINT_TBL p  WHERE p.f1 @ box '(0,0,100,100)';three |     f1     
-------+------------      | (0,0)      | (5.1,34.5)      | (10,10)
(3 rows)

SELECT '' AS three, p.* FROM POINT_TBL p  WHERE not p.f1 @ box '(0,0,100,100)';three |    f1    
-------+----------      | (-10,0)      | (-3,4)      | (-5,-12)
(3 rows)

SELECT '' AS two, p.* FROM POINT_TBL p  WHERE p.f1 @ path '[(0,0),(-10,0),(-10,10)]';two |   f1    
-----+---------    | (0,0)    | (-10,0)
(2 rows)

SELECT '' AS six, p.f1, p.f1 <-> point '(0,0)' AS dist  FROM POINT_TBL p  ORDER BY dist;six |     f1     |       dist
   
 
-----+------------+------------------    | (0,0)      |                0    | (-3,4)     |                5    |
(-10,0)   |               10    | (-5,-12)   |               13    | (10,10)    | 14.1421356237309    | (5.1,34.5) |
34.8749193547455
(6 rows)

SET geqo TO 'off';
SELECT '' AS thirtysix, p1.f1 AS point1, p2.f1 AS point2, p1.f1 <-> p2.f1 AS dist  FROM POINT_TBL p1, POINT_TBL p2
ORDERBY dist, point1 using <<, point2 using <<;thirtysix |   point1   |   point2   |       dist       
 
-----------+------------+------------+------------------          | (-10,0)    | (-10,0)    |                0
|(-5,-12)   | (-5,-12)   |                0          | (-3,4)     | (-3,4)     |                0          | (0,0)
|(0,0)      |                0          | (5.1,34.5) | (5.1,34.5) |                0          | (10,10)    | (10,10)
|               0          | (-3,4)     | (0,0)      |                5          | (0,0)      | (-3,4)     |
   5          | (-10,0)    | (-3,4)     | 8.06225774829855          | (-3,4)     | (-10,0)    | 8.06225774829855
 | (-10,0)    | (0,0)      |               10          | (0,0)      | (-10,0)    |               10          | (-10,0)
 | (-5,-12)   |               13          | (-5,-12)   | (-10,0)    |               13          | (-5,-12)   | (0,0)
 |               13          | (0,0)      | (-5,-12)   |               13          | (0,0)      | (10,10)    |
14.1421356237309         | (10,10)    | (0,0)      | 14.1421356237309          | (-3,4)     | (10,10)    |
14.3178210632764         | (10,10)    | (-3,4)     | 14.3178210632764          | (-5,-12)   | (-3,4)     |
16.1245154965971         | (-3,4)     | (-5,-12)   | 16.1245154965971          | (-10,0)    | (10,10)    |
22.3606797749979         | (10,10)    | (-10,0)    | 22.3606797749979          | (5.1,34.5) | (10,10)    |
24.9851956166046         | (10,10)    | (5.1,34.5) | 24.9851956166046          | (-5,-12)   | (10,10)    |
26.6270539113887         | (10,10)    | (-5,-12)   | 26.6270539113887          | (-3,4)     | (5.1,34.5) |
31.5572495632937         | (5.1,34.5) | (-3,4)     | 31.5572495632937          | (0,0)      | (5.1,34.5) |
34.8749193547455         | (5.1,34.5) | (0,0)      | 34.8749193547455          | (-10,0)    | (5.1,34.5) |
37.6597928831267         | (5.1,34.5) | (-10,0)    | 37.6597928831267          | (-5,-12)   | (5.1,34.5) |
47.5842410888311         | (5.1,34.5) | (-5,-12)   | 47.5842410888311
 
(36 rows)

SELECT '' AS thirty, p1.f1 AS point1, p2.f1 AS point2  FROM POINT_TBL p1, POINT_TBL p2  WHERE (p1.f1 <-> p2.f1) >
3;thirty|   point1   |   point2   
 
--------+------------+------------       | (0,0)      | (-10,0)       | (0,0)      | (-3,4)       | (0,0)      |
(5.1,34.5)      | (0,0)      | (-5,-12)       | (0,0)      | (10,10)       | (-10,0)    | (0,0)       | (-10,0)    |
(-3,4)      | (-10,0)    | (5.1,34.5)       | (-10,0)    | (-5,-12)       | (-10,0)    | (10,10)       | (-3,4)     |
(0,0)      | (-3,4)     | (-10,0)       | (-3,4)     | (5.1,34.5)       | (-3,4)     | (-5,-12)       | (-3,4)     |
(10,10)      | (5.1,34.5) | (0,0)       | (5.1,34.5) | (-10,0)       | (5.1,34.5) | (-3,4)       | (5.1,34.5) |
(-5,-12)      | (5.1,34.5) | (10,10)       | (-5,-12)   | (0,0)       | (-5,-12)   | (-10,0)       | (-5,-12)   |
(-3,4)      | (-5,-12)   | (5.1,34.5)       | (-5,-12)   | (10,10)       | (10,10)    | (0,0)       | (10,10)    |
(-10,0)      | (10,10)    | (-3,4)       | (10,10)    | (5.1,34.5)       | (10,10)    | (-5,-12)
 
(30 rows)

-- put distance result into output to allow sorting with GEQ optimizer - tgl 97/05/10
SELECT '' AS fifteen, p1.f1 AS point1, p2.f1 AS point2, (p1.f1 <-> p2.f1) AS distance  FROM POINT_TBL p1, POINT_TBL p2
WHERE(p1.f1 <-> p2.f1) > 3 and p1.f1 << p2.f1  ORDER BY distance, point1 using <<, point2 using <<;fifteen |   point1
|  point2   |     distance     
 
---------+------------+------------+------------------        | (-3,4)     | (0,0)      |                5        |
(-10,0)   | (-3,4)     | 8.06225774829855        | (-10,0)    | (0,0)      |               10        | (-10,0)    |
(-5,-12)  |               13        | (-5,-12)   | (0,0)      |               13        | (0,0)      | (10,10)    |
14.1421356237309       | (-3,4)     | (10,10)    | 14.3178210632764        | (-5,-12)   | (-3,4)     | 16.1245154965971
      | (-10,0)    | (10,10)    | 22.3606797749979        | (5.1,34.5) | (10,10)    | 24.9851956166046        |
(-5,-12)  | (10,10)    | 26.6270539113887        | (-3,4)     | (5.1,34.5) | 31.5572495632937        | (0,0)      |
(5.1,34.5)| 34.8749193547455        | (-10,0)    | (5.1,34.5) | 37.6597928831267        | (-5,-12)   | (5.1,34.5) |
47.5842410888311
(15 rows)

-- put distance result into output to allow sorting with GEQ optimizer - tgl 97/05/10
SELECT '' AS three, p1.f1 AS point1, p2.f1 AS point2, (p1.f1 <-> p2.f1) AS distance  FROM POINT_TBL p1, POINT_TBL p2
WHERE(p1.f1 <-> p2.f1) > 3 and p1.f1 << p2.f1 and p1.f1 >^ p2.f1  ORDER BY distance;three |   point1   |  point2  |
distance    
 
-------+------------+----------+------------------      | (-3,4)     | (0,0)    |                5      | (-10,0)    |
(-5,-12)|               13      | (5.1,34.5) | (10,10)  | 24.9851956166046 
(3 rows)

RESET geqo;