Re: pg_ctl -w port detection with docs - Mailing list pgsql-patches
From | Bruce Momjian |
---|---|
Subject | Re: pg_ctl -w port detection with docs |
Date | |
Msg-id | 200303200500.h2K50Tk23512@candle.pha.pa.us Whole thread Raw |
In response to | pg_ctl -w port detection with docs ("Greg Sabino Mullane" <greg@turnstep.com>) |
List | pgsql-patches |
Patch applied. Thanks. --------------------------------------------------------------------------- Greg Sabino Mullane wrote: [ There is text before PGP section. ] > [ PGP not available, raw data follows ] > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > NotDashEscaped: You need GnuPG to verify this message > > > (Now featuring documentation: fixed some typos, expanded the > Envrironment and Files section, explained exactly what -w > does) > > This is a patch which allows pg_ctl to make an intelligent > guess as to the proper port when running 'psql -l' to > determine if the database has started up (the -w flag). > > The environment variable PGPORT is used. If that is not found, > it checks if a specific port has been set inside the postgresql.conf > file. If it is has not, it uses the port that Postgres was > compiled with. > > -- > Greg Sabino Mullane greg@turnstep.com > PGP Key: 0x14964AC8 200302230759 > > Index: pg_ctl.sh > =================================================================== > RCS file: /projects/cvsroot/pgsql-server/src/bin/pg_ctl/pg_ctl.sh,v > retrieving revision 1.31 > diff -c -r1.31 pg_ctl.sh > *** pg_ctl.sh 2003/02/14 22:18:25 1.31 > --- pg_ctl.sh 2003/02/22 14:47:09 > *************** > *** 60,65 **** > --- 60,66 ---- > # Placed here during build > bindir='@bindir@' > VERSION='@VERSION@' > + DEF_PGPORT='@DEF_PGPORT@' > > # protect the log file > umask 077 > *************** > *** 240,245 **** > --- 241,247 ---- > DEFPOSTOPTS=$PGDATA/postmaster.opts.default > POSTOPTSFILE=$PGDATA/postmaster.opts > PIDFILE=$PGDATA/postmaster.pid > + CONFFILE=$PGDATA/postgresql.conf > > if [ "$op" = "status" ];then > if [ -f "$PIDFILE" ];then > *************** > *** 356,367 **** > fi > fi > > - # wait for postmaster to start > - if [ "$wait" = yes ];then > - cnt=0 > - $silence_echo $ECHO_N "waiting for postmaster to start..."$ECHO_C > - while : > - do > # FIXME: This is horribly misconceived. > # 1) If password authentication is set up, the connection will fail. > # 2) If a virtual host is set up, the connection may fail. > --- 358,363 ---- > *************** > *** 369,380 **** > # may fail. > # 4) When no Unix domain sockets are available, the connection will > # fail. (Using TCP/IP by default ain't better.) > ! # 5) When a different port is configured, the connection will fail > ! # or go to the wrong server. > ! # 6) If the dynamic loader is not set up correctly (for this user/at > # this time), psql will fail (to find libpq). > ! # 7) If psql is misconfigured, this may fail. > ! if "$PGPATH/psql" -l >/dev/null 2>&1 > then > break; > else > --- 365,390 ---- > # may fail. > # 4) When no Unix domain sockets are available, the connection will > # fail. (Using TCP/IP by default ain't better.) > ! # 5) If the dynamic loader is not set up correctly (for this user/at > # this time), psql will fail (to find libpq). > ! # 6) If psql is misconfigured, this may fail. > ! > ! # Attempt to use the right port > ! # Use PGPORT if set, otherwise look in the configuration file > ! if [ -z $PGPORT ];then > ! PGPORT=`sed -ne 's/^[ ]*port[^=]*=[ ]\+\([0-9]\+\).*/\1/p' $CONFFILE 2>/dev/null` > ! if [ -z $PGPORT ];then > ! PGPORT=$DEF_PGPORT > ! fi > ! fi > ! > ! # wait for postmaster to start > ! if [ "$wait" = yes ];then > ! cnt=0 > ! $silence_echo $ECHO_N "waiting for postmaster to start..."$ECHO_C > ! while : > ! do > ! if "$PGPATH/psql" -p $PGPORT -l >/dev/null 2>&1 > then > break; > else > Index: Makefile > =================================================================== > RCS file: /projects/cvsroot/pgsql-server/src/bin/pg_ctl/Makefile,v > retrieving revision 1.10 > diff -c -r1.10 Makefile > *** Makefile 2000/11/25 17:17:30 1.10 > --- Makefile 2003/02/22 14:47:40 > *************** > *** 17,22 **** > --- 17,23 ---- > pg_ctl: pg_ctl.sh > sed -e 's/@VERSION@/$(VERSION)/g' \ > -e 's,@bindir@,$(bindir),g' \ > + -e 's,@DEF_PGPORT@,$(DEF_PGPORT),g' \ > $< >$@ > chmod a+x $@ > > > > > Index: pg_ctl-ref.sgml > =================================================================== > RCS file: /projects/cvsroot/pgsql-server/doc/src/sgml/ref/pg_ctl-ref.sgml,v > retrieving revision 1.18 > diff -c -r1.18 pg_ctl-ref.sgml > *** pg_ctl-ref.sgml 2003/01/19 00:13:30 1.18 > --- pg_ctl-ref.sgml 2003/02/23 12:56:04 > *************** > *** 73,94 **** > <productname>PostgreSQL</productname> backend server, or displaying > the status of a running postmaster. Although the postmaster can be > started manually, <application>pg_ctl</application> encapsulates > ! tasks such as redirecting log output, properly detaching from the > ! terminal and process group, and it provides convenient options for > controlled shutdown. > </para> > > <para> > In <option>start</option> mode, a new postmaster is launched. The > ! server is started in the background, the standard input attached to > <filename>/dev/null</filename>. The standard output and standard > ! error are either appended to a log file, if the <option>-l</option> > ! option is used, or are redirected to > ! <application>pg_ctl</application>'s standard output (not standard > ! error). If no log file is chosen, the standard output of > ! <application>pg_ctl</application> should be redirected to a file or > ! piped to another process, for example a log rotating program, > ! otherwise the postmaster will write its output the the controlling > terminal (from the background) and will not leave the shell's > process group. > </para> > --- 73,93 ---- > <productname>PostgreSQL</productname> backend server, or displaying > the status of a running postmaster. Although the postmaster can be > started manually, <application>pg_ctl</application> encapsulates > ! tasks such as redirecting log output and properly detaching from the > ! terminal and process group. It also provides convenient options for > controlled shutdown. > </para> > > <para> > In <option>start</option> mode, a new postmaster is launched. The > ! server is started in the background, and standard input is attached to > <filename>/dev/null</filename>. The standard output and standard > ! error are either appended to a log file (if the <option>-l</option> > ! option is used), or redirected to <application>pg_ctl</application>'s > ! standard output (not standard error). If no log file is chosen, the > ! standard output of <application>pg_ctl</application> should be redirected > ! to a file or piped to another process, for example a log rotating program, > ! otherwise the postmaster will write its output to the controlling > terminal (from the background) and will not leave the shell's > process group. > </para> > *************** > *** 102,109 **** > not wait for clients to disconnect. All active transactions are > rolled back and clients are forcibly disconnected, then the > database is shut down. <quote>Immediate</quote> mode will abort > ! all server processes without clean shutdown. This will lead to a recovery > ! run on restart. > </para> > > <para> > --- 101,108 ---- > not wait for clients to disconnect. All active transactions are > rolled back and clients are forcibly disconnected, then the > database is shut down. <quote>Immediate</quote> mode will abort > ! all server processes without a clean shutdown. This will lead to > ! a recovery run on restart. > </para> > > <para> > *************** > *** 121,129 **** > </para> > > <para> > ! <option>status</option> mode checks whether a postmaster is running > ! and if so displays the <acronym>PID</acronym> and the command line > ! options that were used to invoke it. > </para> > </refsect1> > > --- 120,128 ---- > </para> > > <para> > ! <option>status</option> mode checks whether a postmaster is running. > ! If it is, the <acronym>PID</acronym> and the command line > ! options that were used to invoke it are displayed. > </para> > </refsect1> > > *************** > *** 188,194 **** > <para> > Specifies the location of the <filename>postmaster</filename> > executable. By default the postmaster is taken from the same > ! directory as <command>pg_ctl</>, or failing that, the hard-wired > installation directory. It is not necessary to use this > option unless you are doing something unusual and get errors > that the postmaster was not found. > --- 187,193 ---- > <para> > Specifies the location of the <filename>postmaster</filename> > executable. By default the postmaster is taken from the same > ! directory as <command>pg_ctl</command>, or failing that, the hard-wired > installation directory. It is not necessary to use this > option unless you are doing something unusual and get errors > that the postmaster was not found. > *************** > *** 210,216 **** > <listitem> > <para> > Wait for the start or shutdown to complete. Times out after > ! 60 seconds. This is the default for shutdowns. > </para> > </listitem> > </varlistentry> > --- 209,224 ---- > <listitem> > <para> > Wait for the start or shutdown to complete. Times out after > ! 60 seconds. This is the default for shutdowns. A successful > ! shutdown is indicated by removal of the <acronym>PID</scronym> > ! file. For starting up, a successful <command>psql -l</command> > ! indicates success. <command>pg_ctl</command> will attempt to > ! use the proper port for psql. If the environment variable > ! PGPORT exists, that is used. Otherwise, it will see if a port > ! has been set in the <filename>postgresql.conf</filename> file. > ! If neither of those is used, it will use the default port that > ! <productname>PostgreSQL</productname> was compiled with > ! (5432 by default). > </para> > </listitem> > </varlistentry> > *************** > *** 238,247 **** > > <listitem> > <para> > ! Default data direction location > </para> > </listitem> > </varlistentry> > </variablelist> > > <para> > --- 246,265 ---- > > <listitem> > <para> > ! Default data directory location. > </para> > </listitem> > </varlistentry> > + > + <varlistentry> > + <term><envar>PGPORT</envar></term> > + > + <listitem> > + <para> > + Default port for <xref linkend="app-psql"> (used by the -w option). > + </para> > + </listitem> > + </varlistentry> > </variablelist> > > <para> > *************** > *** 253,264 **** > <refsect1> > <title>Files</title> > > ! <para> > ! If the file <filename>postmaster.opts.default</filename> exists in > ! the data directory, the contents of the file will be passed as > ! options to the <application>postmaster</application>, unless > ! overridden by the <option>-o</option> option. > ! </para> > </refsect1> > > > --- 271,328 ---- > <refsect1> > <title>Files</title> > > ! <variablelist> > ! <varlistentry> > ! <term><filename>postmaster.pid</filename></term> > ! > ! <listitem> > ! <para>The existence of this file in the data directory is used to help > ! <application>pg_ctl</application> determine if the server is > ! currently running or not. > ! </para> > ! </listitem> > ! </varlistentry> > ! > ! <varlistentry> > ! <term><filename>postmaster.opts.default</filename></term> > ! > ! <listitem> > ! <para>If this file exists in the data directory, > ! <application>pg_ctl</application> (in <option>start</option> mode) > ! will pass the contents of the file as options to the > ! <application>postmaster</application>, unless overridden > ! by the <option>-o</option> option. > ! </para> > ! </listitem> > ! </varlistentry> > ! > ! <varlistentry> > ! <term><filename>postmaster.opts</filename></term> > ! > ! <listitem> > ! <para>If this file exists in the data directory, > ! <application>pg_ctl</application> (in <option>restart</option> mode) > ! will pass the contents of the file as options to the > ! <application>postmaster</application>, unless overridden > ! by the <option>-o</option> option. The contents of this file > ! are also displayed in <option>status</option> mode. > ! </para> > ! </listitem> > ! </varlistentry> > ! > ! <varlistentry> > ! <term><filename>postgresql.conf</filename></term> > ! > ! <listitem> > ! <para>This file, located in the data directory, is parsed to > ! find the proper port to send to the > ! <application>psql</application> when the <option>-w</option> > ! is given in <option>start</option> mode. > ! </para> > ! </listitem> > ! </varlistentry> > ! > ! </variablelist> > </refsect1> > > > *************** > *** 268,274 **** > <para> > Waiting for complete start is not a well-defined operation and may > fail if access control is set up so that a local client cannot > ! connect without manual interaction. It should be avoided. > </para> > </refsect1> > > --- 332,338 ---- > <para> > Waiting for complete start is not a well-defined operation and may > fail if access control is set up so that a local client cannot > ! connect without manual interaction (e.g. password authentication). > </para> > </refsect1> > > > > > > -----BEGIN PGP SIGNATURE----- > Comment: http://www.turnstep.com/pgp.html > > iD8DBQE+V0ZkvJuQZxSWSsgRAjA+AJ9eFCNSb3Kr4v8UxzRa+/nKSTg87wCeOtzz > oZlhuzlz19ctvswFMmoXPAo= > =HQEB > -----END PGP SIGNATURE----- > > > > ---------------------------(end of broadcast)--------------------------- > TIP 5: Have you checked our extensive FAQ? > > http://www.postgresql.org/users-lounge/docs/faq.html > [ Decrypting message... End of raw data. ] -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
pgsql-patches by date: