Re: reg:conninfo - Mailing list pgsql-admin

From sandhya
Subject Re: reg:conninfo
Date
Msg-id 023301c64c09$3baa9710$cd00000a@sandhyar
Whole thread Raw
In response to reg:conninfo  ("sandhya" <sandhyar@amiindia.co.in>)
List pgsql-admin
Host all all 127.0.0.1/32 md5 This entry is there in configuration file
already.So no probs..I can connect.
But..Just i want to know why it is connecting if i mention just localhost
and why  it giving error if i mention the IP of it(the same m/c's) instead
of local host.
Have u seen the image i sent in last mail?
What is wrong if i mention the localhost IP instead of localhost in my
connection information?


----- Original Message -----
From: "Andy Shellam" <andy.shellam@mailnetwork.co.uk>
To: "'sandhya'" <sandhyar@amiindia.co.in>
Cc: <pgsql-admin@postgresql.org>
Sent: Monday, March 20, 2006 3:48 PM
Subject: RE: [ADMIN] reg:conninfo


> You should be able to connect if you tell your application to connect to
> 127.0.0.1, and put
>
> Host all all 127.0.0.1/32 md5
>
> In your pg_hba.conf file - this is a system default loopback IP for
clients
> on the same machine.
>
> Why is it causing you such a problem using localhost as opposed to an IP
> address? Using localhost (or 127.0.0.1) saves you a slight network
overhead
> than connecting on your network interface's IP.
>
> Andy
>
> -----Original Message-----
> From: sandhya [mailto:sandhyar@amiindia.co.in]
> Sent: Monday, 20 March, 2006 10:13 AM
> To: andy.shellam@mailnetwork.co.uk
> Cc: Postgres
> Subject: Re: [ADMIN] reg:conninfo
>
> Hi Andy.....
>   You r right.Just i mentioned all these as examples.
> I want to connect with the localsystem where the server is running.
> But in my VC application if i mention in connection info host as localhost
> it is working fine.
> But the same if i give my localsystem IP it is showing the following
error.
> Why it is working fine in case of local host and why not incase of IP
> address.
> I have mentioned the IP in pg_hba.conf and reloaded it.
>
>
>
> Please tell me,
>
> Thank you,
> Sandhya R
>
>
> ----- Original Message -----
> From: "Andy Shellam" <andy.shellam@mailnetwork.co.uk>
> To: "'sandhya'" <sandhyar@amiindia.co.in>
> Cc: <pgsql-admin@postgresql.org>
> Sent: Monday, March 20, 2006 3:22 PM
> Subject: RE: [ADMIN] reg:conninfo
>
>
> > Sandhya,
> >
> > You have mentioned 3 different IP addresses for your server in this
topic
> so
> > far.
> >
> > Your pg_hba.conf entry says "10.0.3.67/32" - which means only that IP
can
> > connect - the IP address/range in pg_hba.conf should be your client IP
(if
> > this is on the same server as PGSQL, the best way is to use 127.0.0.1
(the
> > system default localhost IP)).
> >
> > Your application appears to be trying to connect to 10.0.0.205, which is
> > different to the one you've just said your server is 10.0.2.56.
> >
> > Do an "ifconfig" on the console and find out what network adapters there
> are
> > in your server, and what IPs they're bound to - then in your
> postgresql.conf
> > bind PostgreSQL to one of them (if you have multiple adapters) (using
the
> > listen_address=... option - then you can use that IP to specify as the
> > connection IP in your application.
> >
> > But you need to get some consistency in the IPs your server is listening
> on,
> > and your application is trying to connect to.
> >
> > Andy
> >
> > -----Original Message-----
> > From: pgsql-admin-owner@postgresql.org
> > [mailto:pgsql-admin-owner@postgresql.org] On Behalf Of sandhya
> > Sent: Monday, 20 March, 2006 9:49 AM
> > To: Robin Iddon
> > Cc: Postgres
> > Subject: Re: [ADMIN] reg:conninfo
> >
> > Thanks Robin.
> > What u said is right!
> > But my problem is i am not trying connecting from any remote client.
> >
> > In my ConnectionInfo if i mention the host as,
> > host=localhost.The connection is successful.
> >
> > But the same if i give my localsystem IP where my server is running..
> > host = 10.0.2.56(my localhost IP).
> > The Connection is failed.
> > Why is this so?Whether i need to give only localhost in my application
> (or)
> > why it is not accepting when i gave IP of the same system(When the entry
> of
> > this IP is already present in pg_hba.conf file)?
> >
> >
> > ----- Original Message -----
> > From: "Robin Iddon" <robin@edesix.com>
> > To: "sandhya" <sandhyar@amiindia.co.in>
> > Cc: "Postgres" <pgsql-admin@postgresql.org>
> > Sent: Monday, March 20, 2006 2:28 PM
> > Subject: Re: [ADMIN] reg:conninfo
> >
> >
> > > Try looking at the manual for the postmaster process ...
> > >
> > > A simple way of achieving what you want is adding the -i option to the
> > > postmaster command line which allows TCP/IP connections.  Otherwise
only
> > > localhost can connect.
> > >
> > > There are possibly other ways of configuring this same option, but we
> > > use the -i on the command line to the postmaster process.
> > >
> > > Hope this helps,
> > >
> > > Robin
> > >
> > > sandhya wrote:
> > >
> > > >hi,
> > > >
> > > >   I am using postgres8.0.3 on windows.When i am compiling a small
> sample
> > i am facing problem in connection information.
> > > >
> > > >I have given entry in my pg_hba.conf file:
> > > >host            all             all                 10.0.3.67/32
> > md5
> > > >
> > > >And in my application when i pass host in conninfo as,
> > > >host=10.0.3.67...It is not connecting..and throwing error  like,
> > > >Is server running on 10.0.0.205..etc
> > > >But when i give as,
> > > >host=localhost..It is running fine.
> > > >After each change i am doing pg_reload.
> > > >What i need to do inorder to mention the IP in my application instead
> of
> > localhost?
> > > >Please tell me.
> > > >
> > > >Thank you,
> > > >Sandhya
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 2: Don't 'kill -9' the postmaster
> >
> >
> >
> >
> >
>
>
> !DSPAM:14,441e7eaf49417887321075!
>



pgsql-admin by date:

Previous
From: "Andy Shellam"
Date:
Subject: Re: reg:conninfo
Next
From: "Andy Shellam"
Date:
Subject: FW: reg:conninfo